Copy Inspection Results of one lot to other lots at a time

Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,

Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out

Similar Messages

Copy the inspection result from one lot to multiples lots!!

Hi SAP expert,
I want to copy the inspection result from one lot to multiples lots, currently i know how to setup the copy to another lot(SAML Response from SAP ID Service ) , but i dont know to do to multiples lot.
¿Someone can help me?
Thank you

First you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P.

QM: Copying inspection results to another lot

Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
Rgds

Having seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig

Copy result to one lot to all lots

hear i faced one business senario i done settings copy inspection results to one lot to another lot now business requirement is copy inspection result one lot to all lots means i have 01 inspection type lots 10 i recorded result one lot then i want to copy to result all lots in one shot is it possible in sap if it is possible kindly tell solo

No its Not possible.Actually process of the copy of Inspection result form one lot to other Automatically/manually is triggered when you go inside the inspection lot to which it has to be transferred.Then you select the lot from the list from where you want to transfer.
So mass copy is really not possible.
You may have to create the program customized for the same.

Error during copying inspection result.

Hi All,
While recording result with the Inspection plan where I had done settings to copy inspection result from another lot I got the error message;;;;
Message Text
No active implementation exists for BAdI QEC_SELECTION, procedure
Technical Data
Message type__________     E (Error)
Message class_________     QECOPY (QM Data Transfer to an Inspection Lot)
Message number________     016
Message variable 1____     QEC_SELECTION
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________     1 (very important)
Sort criterion________
Number________________     1
Pls guide me how do I activate this BADi
Regards,
Shyamal Joshi

HI all,
I think I will not get any response over it so closing the thread to contribute in new rule of engagement.
Regards,
Shyamal

Copying Inspection results from inspection lot.

Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar Mokashi

Hi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM

Copy inspection results

Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.

Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM

SAP QM Result recording - Copy inspection results functionality

Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
Manohar

Hello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle

Reg: Copying inspection results from inspection( 04) to inspection type (!0

Dear Friends ,
I have configured for Quality certificate.
At the time of delivery , the system will create an inspection lot.
To make delivery we need to carry out RR and UD once again.
Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection type 04 .
Thanks in advance.

HI Dear,
As you said , it is for COA.
And the materials are not batch manged.
Is there any possibility of copying the results of 04 inspection lot to inspection type 10 lot , which is created at the time of PGI.
Because untill and unless RR and UD is made sales people will be not able to make the delivery . if there are multiple lots , it takes
time for them to carry out RR and UD.
Thanks for your reply!!!

Copying inspection result

Dear Experts,
In the production server copying inspection results is possible with one user ID but with another user ID it is giving error. Please let me know if there is any particular related authorization object.
Regards
Sunit

Dear what is the error description and error code or else you can check the missing authorization object by entering SU53 in error screen and check with basis guy.
Cheers
KK

How to copy-paste frames from one document to other with there respective layers intact?

Hi All,
     I am facing an issue while copy paste frames from one document to other. I have a 3 frames in first documents each one on different layer. First document has 3 layers. The second document too have 3 layers , I am copying frames from first document to scrapdata using 'ICopyCmdData ' and 'kCopyCmdBoss'. I have 'Paste Remembers Layers' menu 'Checked' on Layer panel. I am using following function to copy frames to scrapdata.
bool16 copyStencilsFromTheTemplateDocumentIntoScrapData(PMString & templateFilePath)
     bool16 result = kFalse;
    do
        SDKLayoutHelper sdklhelp;
        PMString filePathItemsToBeCopiedFrom(templateFilePath); //("c:\\test\\aa.indt");
        IDFile templateIDFile(filePathItemsToBeCopiedFrom);
        UIDRef templateDocUIDRef = sdklhelp.OpenDocument(templateIDFile);
        if(templateDocUIDRef == UIDRef ::gNull)
            break;
        ErrorCode err = sdklhelp.OpenLayoutWindow(templateDocUIDRef);
        if(err == kFailure)
            break;
        InterfacePtr<IDocument> templatedoc(templateDocUIDRef,UseDefaultIID());
        if(templatedoc == nil)
            break;
        InterfacePtr<ISpreadList>templateSpreadUIDList(templatedoc,UseDefaultIID());
        if(templateSpreadUIDList == nil)
            break;
        IDataBase * templateDocDatabase = templateDocUIDRef.GetDataBase();
        if(templateDocDatabase == nil)
            break;
        UIDRef templateDocFirstSpreadUIDRef(templateDocDatabase, templateSpreadUIDList->GetNthSpreadUID(0));
        InterfacePtr<ISpread> templateSpread(templateDocFirstSpreadUIDRef, IID_ISPREAD);
        if(templateSpread == nil)
            break;
        UIDList templateFrameUIDList(templateDocDatabase);
        if(templateSpread->GetNthPageUID(0)== kInvalidUID)
            break;
        templateSpread->GetItemsOnPage(0,&templateFrameUIDList,kFalse,kTrue);
        InterfacePtr<ICommand> copyStencilsCMD(CmdUtils::CreateCommand(kCopyCmdBoss));
        if(copyStencilsCMD == nil)
            break;
        InterfacePtr<ICopyCmdData> cmdData(copyStencilsCMD, IID_ICOPYCMDDATA);
        if(cmdData == nil)
            break;
        // Copy cmd will own this list
        UIDList* listCopy = new UIDList(templateFrameUIDList);
        InterfacePtr<IClipboardController> clipboardController(gSession,UseDefaultIID());
        if(clipboardController == nil)
            break;
        ErrorCode status = clipboardController->PrepareForCopy();
        if(status == kFailure)
            break;
        InterfacePtr<IDataExchangeHandler> scrapHandler(clipboardController->QueryHandler(kPageItemFlavor));
        if(scrapHandler == nil)
            break;
        clipboardController->SetActiveScrapHandler(scrapHandler);
        InterfacePtr<IPageItemScrapData> scrapData(scrapHandler, UseDefaultIID());
        if(scrapData== nil)
            break;
        UIDRef parent = scrapData->GetRootNode();
        cmdData->Set(copyStencilsCMD, listCopy, parent, scrapHandler);
        if(templateFrameUIDList.Length() == 0)
            return kFalse;
        else
            status = CmdUtils::ProcessCommand(copyStencilsCMD);
        if(status != kFailure)
          result = kTrue;
        sdklhelp.CloseDocument(templateDocUIDRef,kFalse,K2::kSuppressUI, kFalse);
    }while(kFalse);
    return result;
After this I need to close first document. Now I am opening the second document from indt file which has same number of layers as first document. I am trying to paste frames from scrap data to second document using '' 'ICopyCmdData ' and 'kPasteCmdBoss' as shown in follwoing function
bool16 pasteTheItemsFromScrapDataOntoOpenDocument(UIDRef &documentDocUIDRef )
    bool16 result = kFalse;
    do
           InterfacePtr<IClipboardController> clipboardController(gSession,UseDefaultIID());
            if(clipboardController == nil)
                break;
           InterfacePtr<IDataExchangeHandler> scrapHandler(clipboardController->QueryHandler(kPageItemFlavor));
           if(scrapHandler == nil)
                break;
           InterfacePtr<IPageItemScrapData> scrapData(scrapHandler, UseDefaultIID());
            if(scrapData == nil)
               break;
                 //This will give the list of items present on the scrap
            UIDList* scrapContents = scrapData->CreateUIDList();
            if (scrapContents->Length() >= 1)
                InterfacePtr<IDocument> dataToBeSprayedDocument(documentDocUIDRef,UseDefaultIID());
                if(dataToBeSprayedDocument == nil)
                   break;
                InterfacePtr<ISpreadList>dataToBeSprayedDocumentSpreadList(dataToBeSprayedDocument,UseDef aultIID());
                if(dataToBeSprayedDocumentSpreadList == nil)
                     break;
                IDataBase * dataToBeSprayedDocDatabase = documentDocUIDRef.GetDataBase();
                if(dataToBeSprayedDocDatabase == nil)
                     break;
                UIDRef spreadUIDRef(dataToBeSprayedDocDatabase, dataToBeSprayedDocumentSpreadList->GetNthSpreadUID(0));
                SDKLayoutHelper sdklhelp;
                UIDRef parentLayerUIDRef = sdklhelp.GetSpreadLayerRef(spreadUIDRef);
                InterfacePtr<IPageItemScrapData> localScrapData(scrapHandler, UseDefaultIID());
                if(localScrapData == nil)
                    break;
                if(parentLayerUIDRef.GetUID() == kInvalidUID)
                    break;
                InterfacePtr<ICommand> pasteToClipBoardCMD (CmdUtils::CreateCommand(kPasteCmdBoss));
                if(pasteToClipBoardCMD == nil)
                    break;
                InterfacePtr<ICopyCmdData> cmdData(pasteToClipBoardCMD, UseDefaultIID());
                if(cmdData == nil)
                    break;
                if(scrapContents == nil)
                    break;
                PMPoint offset(0.0, 0.0);
                cmdData->SetOffset(offset);
                cmdData->Set(pasteToClipBoardCMD, scrapContents, parentLayerUIDRef );
                ErrorCode status = CmdUtils::ProcessCommand(pasteToClipBoardCMD);
                if(status == kSuccess)
                    CA("result = kTrue");
                    result = kTrue;
            }//end if (scrapContents->Length() >= 1)
    }while(kFalse);
    return result;
     Here in above function its required to set Parent Layer UIDRef and because of this all frames are getting paste in one layer.
Is there any way we can paste frame in there respective layers?
     Also I need to work this code with CS4 server and desktop indesign.
Thanks in advance,
Rahul Dalvi

Try,
// dstDoc must be FrontDocument
InterfacePtr<ILayoutControlData> layoutData(Utils<ILayoutUIUtils>()->QueryFrontLayoutData());
InterfacePtr<ICommand> createMasterFromMasterCmd(CmdUtils::CreateCommand(kCreateMasterFromMasterCmdBoss));
createMasterFromMasterCmd->SetItemList(UIDList(srcMasterSpreadUIDRef));
InterfacePtr<ILayoutCmdData> layoutCmdData(createMasterFromMasterCmd, UseDefaultIID());
layoutCmdData->Set(::GetUIDRef(layoutData->GetDocument()), layoutData);
CmdUtils::ProcessCommand(createMasterFromMasterCmd);

Copy inspection results not working

Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaX

Go through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf

Copy inspection results procedure

Dear Gurus,
I have a scenario that my process order delivers co- product with the main product for which I need to copy the results of the main product.
I have made the settings in SPRO, but I don't know what is the next step, where should I go to copy the results.
Regards,
MaX

Do you want to copy results of one co product lot to final product lot.
Then as you said you have done the customization(like manual or automatic select ),only thing that mainly remains is go the Quant data of the char/mic & select copy results from the previous inspection lot.
Also check the PDF
http://www.scribd.com/doc/29417809/SAP-QM-Copy-Results

Copy some workbooks from one user to other

Hi!
How can I copy (not share) some workbooks from one user to other?
The reason to do this is because we are renaming users to other naming pattern.
Thanks!

You would first need to share the workbooks you want to transfer ownership of to either the new user name, or a responsibility that the new user has (I am assuming this is an Oracle Applications EUL). The user signs on to Discoverer Plus with their new name. They open up the workbook(s) and then do a SAVE AS. That will save the workbook with them as the new owner. You would then need to sign on with the old owner's name and delete those old workbooks (after first backing them up) once you are sure everything is working okay. Yes, this is a yucky process. What we do is we use a "dummy" user name when we create/modify workbooks. That way the dummy user name is the owner of the workbooks. So it does not matter if a person leaves or if you change user naming conventions. If you have a lot of users creating workbooks, then a dummy user name may not work well. You could always submit an enhancement request to Oracle for a copy function. I expect you would get a lot of customers supporting such a request.
John Dickey

How i can copy the script from one language to other language

dear all,
how can i copy script i.e i changed =in EN, but i want copy convert same effects in DE (from one language to other language but not all language)

hi,
From the SAP standard menu, choose SE71.
On the Form Painter: Request screen:
1)Enter the name of the form (ZORDER01) in the Form field.
2)Enter DE in the Language field.
3)Click created and press OK.
4)From menu bar, choose form->copy from
5)In the popup, give formname as (ZORDER01) and language as EN and click ok.
6)Save the form and activate it.
Regards,
Sailaja.

Copy Inspection Results of one lot to other lots at a time

Similar Messages

Maybe you are looking for