Copy job repeatedly fails, manual initialization completes

I have a few copy jobs scheduled to run on my network; I back up several of the company's departments from the network share onto the Iomega StorCenter px6-300d. The directories specified are correct, exist, and do not have any restictions that would hinder the copy job from completing. The neccessary credentials are also verrified. It has worked accurately in the past, but over the last couple weeks it has been causing problems. The jobs do not complete, and now error out. When I look at the logs, I get a message saying that the folder did not mount, because the directory does not exist. However, when I manually click "run the copy job now", it completed just fine. Has anyone experienced anything like this before? Is there any reason you can think of that the automated job isn't completed, but the manual one is? I'm baffled, I've checked to make sure the machines dont have a nightly reboot or anything, ensuring that they are online at the time of the request. Any input would be helpful
-Andrew

I am seeing a similar problem on ix4-300d:
- daily full copy to a separate folder on a network attached ix2
- intermittendly failing copyjobs ( apparently right at the end ), can sucessfully be restarted manually ( finishes then in 2 minutes)
- after a few weeks strange behaviour: copy jobs finish within a minute ( typically needs 2 hrs ) but no error indication. Normal operation after rebooting target and source
This problem has been reported since quite some time. Network itself has no problems, error indicatons of copy job do not lead to problem. Firmware has been updated since, both units already replaced (under warranty).
Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
I am not a Lenovo Employee.
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Similar Messages

  • Unable to restore SharePoint farm with Backup Exec - Farm Topolgy appears to be locked and job repeatedly fails

    Hi All
    I'm attempting a full restore of a SharePoint 2010 farm, single server housed on the same server as the SQL server that holds the SharePoint databases. Backup and restore is via Backup Exec, the backup job was carried out via BE 2012 and the Restore is via
    BE 2104. The server I'm attempting to restore to has also been restored by using the system state and a copy of the drives from the original source server - hence its pretty much a clone of the source server.
    Irrespective of the account used to run the restore job I'm seeing repeated failures with the error "Unable to lock the Microsoft SharePoint Farm Topology. You must unlock the farm topology and retry the job".
    By restoring the admin databases directly by taking a SQL backup of the source databases and restoring these to the server I'm attempting to restore SharePoint to I have succeeded in bringing the SharePoint admin console back to
    life, none of the sites are in a locked state, and they can be locked and unlocked both via the admin console or via Powershell. Locking and unlocking the makes no difference.
    Any ideas where I can look to from here, could the above error be a cryptic Backup Exec error that doesn't actually mean what it says?

    Hi,
    Reviewing the DPMRACurr log on the target server during the Date/Time of restore may assist with potential paths to why the job is failing. The logs can be found in the
    following path on the target server <DPM Install path>/Program Files Microsoft Data Protection Manager/DPM/Temp
    The logs may uncover why we face the current issue. For example the following “ATTACH " – Failed <and also reason why>
    Also the DPM server MSDPMCurr log during the Date/Time of restore may also assist with the issue you face. For example the following may be seen “MountDatabaseFailed”
    Also note the below process is carried out with the method of restore which was used.
    DPM restores the DB to the destination SQL server once the DB is attached, then the restore process is complete and now will be SharePoint front end server connecting to
    that DB using the account that was setup with configuresharepoint.exe -enablesharepoint protection. That account needs permissions to connect to that database. The attach phase itself is using the system account from DPMRA process on the local SQL Server.
    If you identify the issues are permission related first ensure
    the DPMRA service [logon account] has access within SQL for the SQL instance that we are restoring to this account will need DB creator for the following system DB master.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II.
    [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

  • Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tri

    Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tried using the CC Cleaner Tool but nothing works? Any solution please. Was new computer and newly purchased CS6 software downloaded 2 days prior to the upgrade.

    make sure you follow all the steps here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1,

    Hello,
    I am installing ECC 6.0 on database Maxdb7.6. window 2003 service pack 2 processor AMD 3400 RAM 2 GB,
    I am getting the following error at the ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
    WARNING 2010-10-29 22:40:15
    Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ADA -importDirs D:\Ides\exportdb\db1\EXP1;D:\Ides\exportdb\db2\EXP2;D:\Ides\exportdb\db3\EXP3;D:\Ides\exportdb\db4\EXP4;D:\Ides\exportdb\db5\EXP5;D:\Ides\exportdb\db6\EXP6;D:\Ides\exportdb\db6\EXP7;D:\Ides\exportdb\db6\EXP8;D:\Ides\exportdb\db6\EXP9;D:\Ides\exportdb\db6\EXP10;D:\Ides\exportdb\db6\EXP11 -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS" -orderBy "" -r3loadExe E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -nolog -c 0" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_09"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.Loading of 'SAPSSEXC' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
    ERROR 2010-10-29 22:40:15
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    ERROR 2010-10-29 22:40:15
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    import_monitor.java.log
    java version "1.4.2_09"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
    Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
    Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.
    Loading of 'SAPSSEXC' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
    PLZ help me
    Thanks&regards
    Vijay kumar
    Moved from ABAP, General
    Edited by: kishan P on Nov 2, 2010 10:17 AM

    ERROR: 2010-10-29 22:07:26 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is interrupted with R3load error.
    Process 'E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0' exited with return code 2.
    For mode details see 'SAPSSEXC.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    WARNING: 2010-10-29 22:07:56
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2010-10-29 22:07:56
    1 error(s) during processing of packages.
    INFO: 2010-10-29 22:07:56
    Import Monitor is stopped.
    INFO: 2010-10-29 22:39:45
    Import Monitor is started.
    CONFIG: 2010-10-29 22:39:45
    Application options:
    dbCodepage=4103
    dbType=ADA
    extFiles=no
    importDirs=D:\Ides\exportdb\db1\EXP1;D:\Ides\exportdb\db2\EXP2;D:\Ides\exportdb\db3\EXP3;D:\Ides\exportdb\db4\EXP4;D:\Ides\exportdb\db5\EXP5;D:\Ides\exportdb\db6\EXP6;D:\Ides\exportdb\db6\EXP7;D:\Ides\exportdb\db6\EXP8;D:\Ides\exportdb\db6\EXP9;D:\Ides\exportdb\db6\EXP10;D:\Ides\exportdb\db6\EXP11
    installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS
    jobNum=3
    loadArgs= -nolog -c 0
    monitorTimeout=30
    orderBy=
    r3loadExe=E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe
    sapinst=
    trace=all
    tskFiles=yes
    CONFIG: 2010-10-29 22:39:45
    List of packages with table structure: 'SAP0000'.
    CONFIG: 2010-10-29 22:39:45
    List of packages with views: 'SAPVIEW'.
    TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS\DDLADA.TPL' template file is started.
    INFO: 2010-10-29 22:39:45 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS\DDLADA.TPL' template file is successfully completed.
    Primary key creation: before load.
    Index creation: after load.
    INFO: 2010-10-29 22:39:45
    Data codepage 4103 is determined using TOC file 'D:\Ides\exportdb\db1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
    TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is started.
    TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSEXC' import package into database:
    E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0
    ERROR: 2010-10-29 22:39:46 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC' import package is interrupted with R3load error.
    Process 'E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0' exited with return code 2.
    For mode details see 'SAPSSEXC.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    WARNING: 2010-10-29 22:40:15
    Cannot start import of packages with views because not all import packages with tables are loaded successfully.
    WARNING: 2010-10-29 22:40:15
    1 error(s) during processing of packages.
    INFO: 2010-10-29 22:40:15
    Import Monitor is stopped.

  • NMP 12 core D700s failing to initialize thunderbolt bus 0 if the hdmi cable is plugged in

    Hey Everyone,
    I have a new Mac Pro, 12 core model with D700s, 32 GB RAM.  I started having issues about a month ago after only owning it for one month.  I noticed that sometimes when I booted up, some of my thunderbolt buses were not initializing.  I rechecked the literature to make sure (and correct me if i'm wrong), but you can have one thunderbolt device plugged in bus 0 (the bottom two ports) and still use hdmi.  I use the HDMI for my desktop on various monitors and have multiple devices that I need to connect over thunderbolt.  I was able to narrow it down and isolate the HDMI plug as being the culprit.  If i attach a display port to hdmi adapter to either of the bottom t-bolt ports, it boots up and initializes bus 0.  Any time I have an HDMI plugged in, its about 50/50 on if it will initialize bus 0.  When this happens, multiple restarts appear to catch it.  Since I work in a job where I might have to power down and relocate multiple times, this has been problematic.  Any one else seeing this or getting this?
    Hardware Information:
              Mac Pro (Late 2013)
              Mac Pro - model: MacPro6,1
              1 2.7 GHz 12-Core Intel Xeon E5 CPU: 12 cores
              32 GB RAM
    Video Information:
              AMD FirePro D700 - VRAM: 6144 MB
              AMD FirePro D700 - VRAM: 6144 MB
    System Software:
              OS X 10.9.2 (13C64) - Uptime: 0 days 0:13:10
    Disk Information:
              APPLE SSD SM1024F disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Mac Pro 1TB (disk0s2) / [Startup]: 999.7 GB (888.21 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MARVELL VIRTUALL 
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              VIA Labs, Inc. 4-Port USB 3.0 Hub
              Tangent Wave Ltd. element-Bt
              OEM USB DONGLE
              Tangent Wave Ltd. element-Kb
              Logitech USB-PS/2 Optical Mouse
              Tangent Wave Ltd. element-Tk
              Razer Razer DeathStalker
              VIA Labs, Inc. 4-Port USB 3.0 Hub
                        GenesysLogic USB3.0 Hub
              GenesysLogic USB2.0 Hub
              Blackmagic Design Micro Videohub
              Blackmagic Design HDLink Pro
              Blackmagic Design HDLink Pro
              C-Media Electronics Inc.       USB PnP Sound Device
              SanDisk USB3.0 Card Reader
              Sony SBAC-US20
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus_2
                        Blackmagic Design UltraStudio 4K
                                  Sonnet Technologies, Inc. Echo ExpressCard/34 TB
              Apple Inc. thunderbolt_bus_1
                        Belkin International, Inc. Express Dock
                        Sonnet Technologies, Inc. Echo Express III TB2
                                  Promise Technology, Inc. Pegasus R-Series
    Configuration files:
              /etc/sysctl.conf - Exists
    Kernel Extensions:
              com.promise.driver.stex          (5.2.7 - SDK 10.9)
              com.CalDigit.driver.CalDigitUSBxHCI          (1.4.2a2)
              com.blackmagic-design.driver.BlackmagicIO          (10.1 - SDK 10.7)
              com.blackmagic-design.iokit.Blackmagic_HDLink_Driver          (3.5.3 - SDK 10.6)
              com.nvidia.CUDA          (1.1.0)
    Startup Items:
              CUDA: Path: /System/Library/StartupItems/CUDA
    Launch Daemons:
              [System] com.blackmagic-design.desktopvideo.XPCService.plist 3rd-Party support link
              [System] com.blackmagic-design.DesktopVideoHelper.plist 3rd-Party support link
              [System] com.blackmagic-design.streaming.BMDStreamingServer.plist 3rd-Party support link
              [System] com.blackmagic-design.videohub.frameconverter.plist 3rd-Party support link
              [System] com.blackmagic-design.videohub.plist 3rd-Party support link
              [System] com.edb.launchd.postgresql-8.4.plist 3rd-Party support link
              [System] com.promise.bgasched.plist 3rd-Party support link
              [System] com.promise.BGPMain_R.plist 3rd-Party support link
              [System] com.promise.emaild.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
              [System] uk.co.tangentwave.hub.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.adobe.AdobeCreativeCloud.plist 3rd-Party support link
              [System] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist 3rd-Party support link
              [System] com.gopro.stereomodestatus.plist 3rd-Party support link
              [System] com.nvidia.CUDASoftwareUpdate.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
              [System] com.wacom.wacomtablet.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
    User Login Items:
              RED Watchdog
              Tangent Mapper
    Internet Plug-ins:
              WacomNetscape: Version: 2.1.0-1 - SDK 10.8 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 3rd-Party support link
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
    Safari Extensions:
              Open in Internet Explorer: Version: 1.0
    Audio Plug-ins:
              BlackmagicAudio: Version: 1.0 - SDK 10.8 3rd-Party support link
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Blackmagic Desktop Video  3rd-Party support link
              CUDA Preferences  3rd-Party support link
              GoPro  3rd-Party support link
              WacomTablet  3rd-Party support link
    Old Applications:
              Uninstall:          Version: 1.0 - SDK 10.4 3rd-Party support link
                        /Users/[redacted]/Software/Neat Video OpenFX/Uninstall.app
              P-touch Editor:          Version: 5.0.501 - SDK 10.5 3rd-Party support link
                        /Applications/P-touch Editor 5.0/P-touch Editor.app
              SA Color Finesse 3 UI:          Version: 3.0.10(292) - SDK 10.5 3rd-Party support link
                        /Applications/Adobe After Effects CC/Plug-ins/Effects/Synthetic Aperture/(CF3 Support)/SA Color Finesse 3 UI.app
              Uninstall:          Version: 1.0 - SDK 10.4 3rd-Party support link
                        /Users/[redacted]/Software/Legacy Software/Neat Video OpenFX/Uninstall.app
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   1%          WindowServer
                   1%          EtreCheck
                   0%          syncdefaultsd
                   0%          Creative Cloud
                   0%          com.apple.iCloudHelper
    Top Processes by Memory:
              131 MB          Pages
              131 MB          Safari
              98 MB          Creative Cloud
              98 MB          Preview
              98 MB          Dock
    Virtual Memory Information:
              27.56 GB          Free RAM
              2.09 GB          Active RAM
              505 MB          Inactive RAM
              1.83 GB          Wired RAM
              435 MB          Page-ins
              0 B          Page-outs
    Apr 7 19:40:23 localhost bootlog[0]: BOOT_TIME 1396924823 0! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.appstore" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    ! ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".!
    ! Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".!
    Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.authd" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.bookstore" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.eventmonitor" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.install" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.iokit.power" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.mail" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.MessageTracer" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.performance" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 localhost syslogd[23]: Configuration Notice:!
    !  ASL Module "com.apple.securityd" claims selected messages.!
    !  Those messages may not appear in standard system log files or in the ASL database.! Apr 7 19:40:25 --- last message repeated 6 times ---!
    Apr 7 19:40:25 localhost kernel[0]: Longterm timer threshold: 1000 ms!
    Apr 7 19:40:25 localhost kernel[0]: PMAP: PCID enabled!
    Apr 7 19:40:25 localhost kernel[0]: PMAP: Supervisor Mode Execute Protection enabled!
    Apr 7 19:40:25 localhost kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64!
    Apr 7 19:40:25 localhost kernel[0]: vm_page_bootstrap: 8075836 free pages and 280004 wired pages!
    Apr 7 19:40:25 localhost kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]!
    Apr 7 19:40:25 localhost kernel[0]: zone leak detection enabled!
    Apr 7 19:40:25 localhost kernel[0]: "vm_compressor_mode" is 4!
    Apr 7 19:40:25 localhost kernel[0]: standard timeslicing quantum is 10000 us!
    Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 Apr 7 19:40:25 (TMSafetyNet)! Apr 7 19:40:25 Apr 7 19:40:25 reserved.!
    localhost kernel[0]: standard background quantum is 2500 us! localhost kernel[0]: mig_table_max_displ = 74!
    localhost kernel[0]: TSC Deadline Timer supported and enabled! localhost kernel[0]: "name" not a kext!
    localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=3 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=4 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=5 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=6 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=7 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=8 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=9 LocalApicId=9 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=10 LocalApicId=10 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=11 LocalApicId=11 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=12 LocalApicId=16 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=13 LocalApicId=17 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=14 LocalApicId=18 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=15 LocalApicId=19 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=16 LocalApicId=20 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=17 LocalApicId=21 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=18 LocalApicId=22 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=19 LocalApicId=23 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=20 LocalApicId=24 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=21 LocalApicId=25 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=22 LocalApicId=26 Enabled! localhost kernel[0]: AppleACPICPU: ProcessorId=23 LocalApicId=27 Enabled! localhost kernel[0]: calling mpo_policy_init for Sandbox!
    localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)! localhost kernel[0]: calling mpo_policy_init for Quarantine!
    localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)! localhost kernel[0]: calling mpo_policy_init for TMSafetyNet!
    localhost kernel[0]: Security policy loaded: Safety net for Time Machine
    localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993! localhost kernel[0]: The Regents of the University of California. All rights
    Apr 7 19:40:25
    Apr 7 19:40:25
    headers!
    Apr 7 19:40:25
    Apr 7 19:40:25
    Apr 7 19:40:25
    Apr 7 19:40:25
    Apr 7 19:40:25
    cpu) 0xfff80000000, 0x80000000!
    Apr 7 19:40:25 localhost kernel[0]: [ PCI configuration begin ]!
    Apr 7 19:40:25 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 3334777B!
    localhost kernel[0]: MAC Framework successfully initialized!
    localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer
    localhost kernel[0]: AppleKeyStore starting (BUILT: Jan 16 2014 20:19:00)! localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87!
    localhost kernel[0]: IOAPIC: Version 0x20 Vectors 88:111!
    localhost kernel[0]: ACPI: sleep states S3 S4 S5!
    localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (44
    Apr 7 19:40:25 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete!
    Apr 7 19:40:25 localhost kernel[0]: console relocated to 0xfff80010000!
    Apr 7 19:40:25 localhost kernel[0]: [ PCI configuration end, bridges 62, devices 40 ]!
    Apr 7 19:40:25 localhost kernel[0]: mcache: 24 CPU(s), 64 bytes CPU cache line size! Apr 7 19:40:25 localhost kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]! Apr 7 19:40:25 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused!
    Apr 7 19:40:25 localhost kernel[0]: srom rev:11!
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.606571: ChangeVCO => vco:960, xtalF:40, frac: 98, ndivMode: 3, ndivint: 24!
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.609224: Data written into the PLL_CNTRL_ADDR2: 00000c31!
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.611311: Data written into the PLL_CNTRL_ADDR3 (Fractional): 0000100e!
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.621783: BTCOEXIST off !
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.623256: BRCM tunables:!
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.624267: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]!
    Apr 7 19:40:25 localhost kernel[0]: ARPT: 1.627926: wl0: Broadcom BCM43a0, vendorID[0x14e4] BAR0[0xa0200004]!
    Apr 7 19:40:25 localhost kernel[0]: 6.30.223.154 (r420397)!
    Apr 7 19:40:24 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***!
    Apr 7 19:40:25 localhost kernel[0]: SATA WARNING: IDENTIFY DEVICE checksum not implemented.!
    Apr 7 19:40:25 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start! Apr 7 19:40:25 localhost kernel[0]: rooting via boot-uuid from /chosen: A962FD97-4601-382C- B4EC-DD073E4748F7!
    Apr 7 19:40:24 localhost com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***! Apr 7 19:40:25 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</ key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot- uuid-media</string></dict>!
    Apr 7 19:40:25 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start!
    Apr 7 19:40:25 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded!
    Apr 7 19:40:25 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded! Apr 7 19:40:24 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***!
    Apr 7 19:40:25 localhost com.apple.launchd[1] (com.promise.BGPMain_R): Unknown key for boolean: OnLoad!
    Apr 7 19:40:25 localhost kernel[0]: AppleIntelCPUPowerManagementClient: readyGot boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@1C,4/IOPP/ SSD0@0/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/ IOAHCIBlockStorageDevice/IOBlockStorageDriver/APPLE SSD SM1024F Media/ IOGUIDPartitionScheme/Mac Pro 1TB@2!
    Apr 7 19:40:25 localhost com.apple.SecurityServer[19]: Session 100000 created!
    Apr 7 19:40:25 localhost kernel[0]: BSD root: disk0s2, major 1, minor 1!
    Apr 7 19:40:25 localhost kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management!
    Apr 7 19:40:25 --- last message repeated 1 time ---!
    Apr 7 19:40:25 localhost kernel[0]: FireWire runtime power conservation disabled. (3)!
    Apr 7 19:40:25 localhost kernel[0]: STEX : PromiseSTEX loaded up...!
    Apr 7 19:40:25 localhost kernel[0]: hfs: mounted Mac Pro 1TB on device root_device!
    Apr 7 19:40:25 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID ec1a597ba0712f76; max speed s800.!
    Apr 7 19:40:25 localhost distnoted[24]: # distnote server daemon absolute time: 3.925139235 civil time: Mon Apr 7 19:40:25 2014 pid: 24 uid: 0 root: yes!
    Apr 7 19:40:25 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification!
    Apr 7 19:40:25 localhost kernel[0]: IO80211Interface::efiNVRAMPublished(): !
    Apr 7 19:40:25 localhost configd[22]: IPConfiguration: verbose mode enabled!
    Apr 7 19:40:25 localhost com.apple.SecurityServer[19]: Entering service!
    Apr 7 19:40:25 localhost kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1!
    Apr 7 19:40:25 localhost UserEventAgent[15]: Captive: CNPluginHandler en2: Inactive!
    Apr 7 19:40:25 localhost UserEventAgent[15]: Failed to copy info dictionary for bundle /System/ Library/UserEventPlugins/alfUIplugin.plugin!
    Apr 7 19:40:25 localhost kernel[0]: Waiting for DSMOS...!
    Apr 7 19:40:26 localhost kernel[0]: AirPort: Link Down on en2. Reason 8 (Disassociated because station leaving).!
    Apr 7 19:40:26 localhost configd[22]: dhcp_arp_router: en2 SSID unavailable!
    Apr 7 19:40:26 localhost configd[22]: network changed.!
    Apr 7 19:40:26 BCs-Mac-Pro.local configd[22]: setting hostname to "BCs-Mac-Pro.local"!
    Apr 7 19:40:26 BCs-Mac-Pro kernel[0]: AGC: 3.4.35, HW version=4.0.11 [3.2.8], flags:0, features:0!
    Apr 7 19:40:26 BCs-Mac-Pro kernel[0]: Previous Shutdown Cause: 3!
    Apr 7 19:40:26 BCs-Mac-Pro.local systemkeychain[44]: done file: /var/run/ systemkeychaincheck.done!
    Apr 7 19:40:26 BCs-Mac-Pro kernel[0]: [05094] BlackmagicIO: Started device "UltraStudio
    4K" (cc2b72d) FW Date: 02-11 08:54!
    Apr 7 19:40:26 BCs-Mac-Pro kernel[0]: STEX : Init controller event and source!
    Apr 7 19:40:27 BCs-Mac-Pro.local com.apple.kextd[16]: WARNING - Invalid signature -67050 0xFFFFFFFFFFFEFA16 for kext "/System/Library/Extensions/Blackmagic_HDLink_Driver.kext"! Apr 7 19:40:27 BCs-Mac-Pro kernel[0]: HDLink driver found device: 04b4:bd11 - writing FX2! Apr 7 19:40:27 --- last message repeated 1 time ---!
    Apr 7 19:40:27 BCs-Mac-Pro kernel[0]: IOPPF - IODeviceTree:/efi/platform/ StartupPowerEvents: 0x0!
    Apr 7 19:40:28 BCs-Mac-Pro kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en13, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,4de1,0000]! Apr 7 19:40:29 BCs-Mac-Pro kernel[0]: IOBluetoothUSBDFU::probe!
    Apr 7 19:40:29 BCs-Mac-Pro kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828D FirmwareVersion - 0x0079!
    Apr 7 19:40:29 BCs-Mac-Pro kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x1000 ****!
    Apr 7 19:40:29 BCs-Mac-Pro kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport] [start] -- Completed -- 0x1000 ****!
    Apr 7 19:40:29 BCs-Mac-Pro kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode!
    Apr 7 19:40:29 BCs-Mac-Pro kernel[0]: STEX : Get the virtual address : ab6a6000

    Quote from: Sea Dog on 15-June-14, 22:57:21
    Good luck with that! Using it to update a BIOS is about as risky as it gets. Better off to have tried M-Flash, BIOS + ME selection choice.
    too late :( well. I downloaded the version from my mobo support page. it seems to have not failed me this time. though in the future, though I seem to have lucked out this time, I will try m-flash or bios + me. I mean I think I lucked out. I am by no means an expert, but my computer booted, so I assume the update was a success?
    Updating the bios didn't solve my problem though. any ideas?

  • Installer failed to initialize... unable to install CS 5.5 - PLEASE HELP Student in finals week!

    Problem:  “Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem”
    Background:  Windows 8 became corrupt and I had to perform a full Windows Recovery (the “Remove everything and reinstall Windows” type).
    Current Situation:  I am a Senior in College, have Summer finals this week, my Senior project due, I am behind on my job design work, and I am going crazy because I can’t find anything/anyone to help me.
    Set Up:  Lenovo Y410P, Windows 8.1, CS 5.5 Design Standard Student-Teacher Edition (Yes, I have the media and product code/license key, as I purchased a valid copy in my university student store).
    Here’s what I have done over and over again for the last SIX WEEKS!
    1. Attempts to install from the original install DVD result in the following error, “Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem”
    2. [I click] Get “Adobe Support Advisor”
    3. [I see mssg] The Adobe Support Advisor has been discontinued.. The tool has been replaced with [unnamed/unlinked] improved installation support mechanisms…
    4. [I Run] “AdobeCreativeCloudCleanerTool” (see results below)
    Note:  I cannot run Windows Uninstall because, following Windows Restore, Windows doesn’t recognize that CS5.5 has been installed.  I do still see the following folders in Windows explorer, but Adobe Support says "don't attempt to manually remove folders";
          C:\Program Files (x86)\Common Files\Adobe\
               \Adobe
               \Adobe PCD
               \Adobe Photoshop CS5.1
               \Adobe Application Manager
               \Adobe CerativeCloudCleaner Tool
               \backup…
    [Contents of]  Adobe Creative Cloud Cleaner Tool .txt
    [Fri Jul 11 22:50:30 2014] ---------------------------------------------------------
    [Mon Aug 04 22:58:11 2014] ---------------------------------------------------------
    [Mon Aug 04 22:58:11 2014] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
    [Mon Aug 04 22:58:11 2014] ---------------------------------------------------------
    [Mon Aug 04 22:58:11 2014] Win OS Version: 6.2
    [Mon Aug 04 22:58:11 2014] Cleaner Tool version                              : 2.0.0.0
    [Mon Aug 04 22:58:11 2014] Cleanup source directory     : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
    [Mon Aug 04 22:58:11 2014] [AdobeProgramFiles]                            : C:\Program Files (x86)\Adobe
    [Mon Aug 04 22:58:11 2014] [AdobeProgramFiles_x64]  : C:\Program Files\Adobe
    [Mon Aug 04 22:58:11 2014] [AdobeCommon]                                    : C:\Program Files (x86)\Common Files\Adobe
    [Mon Aug 04 22:58:11 2014] [AdobeCommon_x64]                          : C:\Program Files\Common Files\Adobe
    [Mon Aug 04 22:58:11 2014] [UserRoamingAppData]                       : C:\Users\Kaylene\AppData\Roaming
    [Mon Aug 04 22:58:11 2014] [UserLocalAppData]                               : C:\Users\Kaylene\AppData\Local
    [Mon Aug 04 22:58:11 2014] [StartMenu]                                                              : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    [Mon Aug 04 22:58:11 2014] [System32Folder]                                   : C:\WINDOWS\system32
    [Mon Aug 04 22:58:11 2014] [SharedApplicationData]      : C:\ProgramData
    [Mon Aug 04 22:58:32 2014] ---------------------------------------------------------
    [Mon Aug 04 22:58:32 2014] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
    [Mon Aug 04 22:58:32 2014] ---------------------------------------------------------
    [Mon Aug 04 22:58:32 2014] Win OS Version: 6.2
    [Mon Aug 04 22:58:32 2014] Cleaner Tool version                              : 2.0.0.0
    [Mon Aug 04 22:58:32 2014] Cleanup source directory     : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
    [Mon Aug 04 22:58:32 2014] [AdobeProgramFiles]                            : C:\Program Files (x86)\Adobe
    [Mon Aug 04 22:58:32 2014] [AdobeProgramFiles_x64]  : C:\Program Files\Adobe
    [Mon Aug 04 22:58:32 2014] [AdobeCommon]                                    : C:\Program Files (x86)\Common Files\Adobe
    [Mon Aug 04 22:58:32 2014] [AdobeCommon_x64]                          : C:\Program Files\Common Files\Adobe
    [Mon Aug 04 22:58:32 2014] [UserRoamingAppData]                       : C:\Users\Kaylene\AppData\Roaming
    [Mon Aug 04 22:58:32 2014] [UserLocalAppData]                               : C:\Users\Kaylene\AppData\Local
    [Mon Aug 04 22:58:32 2014] [StartMenu]                                                              : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    [Mon Aug 04 22:58:32 2014] [System32Folder]                                   : C:\WINDOWS\system32
    [Mon Aug 04 22:58:32 2014] [SharedApplicationData]      : C:\ProgramData
    [Mon Aug 04 22:58:45 2014] Language selected: English
    [Mon Aug 04 22:58:45 2014] Displaying the Adobe End User License Agreement
    Gen_WWCombined-en_US-20121017_1230
    [Mon Aug 04 22:58:45 2014] Please enter (y) for Yes or (n) for No. ... >>
    [Mon Aug 04 22:59:12 2014] Choose from one of the following options to clean up :
    [Mon Aug 04 22:59:12 2014] 1. All
    [Mon Aug 04 22:59:12 2014] 2. Adobe Flash Player 10.2
    [Mon Aug 04 22:59:12 2014] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
    [Mon Aug 04 22:59:12 2014] 4. Creative Cloud 2014 only
    [Mon Aug 04 22:59:12 2014] 5. Creative Cloud only
    [Mon Aug 04 22:59:12 2014] 6. CS6 only
    [Mon Aug 04 22:59:12 2014] 7. CS5-CS5.5-CS6
    [Mon Aug 04 22:59:12 2014] 8. CS5-CS5.5
    [Mon Aug 04 22:59:12 2014] 9. CS3, CS4
    [Mon Aug 04 22:59:12 2014] 10. Adobe Id credentials
    [Mon Aug 04 22:59:12 2014] 11. Quit
    [Mon Aug 04 22:59:12 2014] Choice :>
    [Mon Aug 04 22:59:32 2014] User selected: CS5-CS5.5
    [Mon Aug 04 22:59:32 2014] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db" "C:\Program Files (x86)\Common Files\Adobe\backup20140804T225932\pdb.db"
    [Mon Aug 04 22:59:32 2014] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db" "C:\Program Files (x86)\Common Files\Adobe\backup20140804T225932\Media_db.db"
    [Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Mon Aug 04 22:59:32 2014] List of products installed on this machine
    [Mon Aug 04 22:59:32 2014] Listing products for cleanup:
    [Mon Aug 04 22:59:32 2014] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
    [Mon Aug 04 22:59:50 2014] response 1
    [Mon Aug 04 22:59:50 2014] Are you sure you want to clean all the listed products and associated files?
    [Mon Aug 04 22:59:50 2014] Type (y) to confirm and remove or (n) to quit ... >>
    [Mon Aug 04 22:59:55 2014] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
    [Mon Aug 04 22:59:55 2014] User selected: 'Clean All'
    [Mon Aug 04 22:59:55 2014] *-*-*-*-*-*-* Start removing product : ALL *-*-*-*-*-*-*
    [Mon Aug 04 22:59:55 2014] *-*-*-*-*-*-* Finished removing product : ALL *-*-*-*-*-*-*
    [Mon Aug 04 22:59:55 2014] Action : Created the C:\Program Files (x86)\Common Files\Adobe\backup20140804T225932 folder as backup of PDB and MediaDB for this session.
    [Mon Aug 04 22:59:55 2014] LOG FILE SAVED TO: C:\Users\Kaylene\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
    [Mon Aug 04 22:59:55 2014] Adobe Creative Cloud Cleaner Tool completed successfully
    [Mon Aug 04 22:59:55 2014]
    [Mon Aug 04 22:59:55 2014] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Mon Aug 04 22:59:32 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Mon Aug 04 22:59:55 2014] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Mon Aug 04 22:59:55 2014] ---------------------------------------------------------
    [Mon Aug 04 22:59:55 2014] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
    [Mon Aug 04 22:59:55 2014] ---------------------------------------------------------

    \Users\[user name]\AppData\Local\Temp\ PDApp .log  file contents  (Here it is, not sure what to do with it, do you?)...
    8/4/2014 22:47:03 [INFO] Setup - Build Version - 2.0.242.0
    8/4/2014 22:47:03 [INFO] Setup - Logging Level verbosity Set  to 4
    8/4/2014 22:47:03 [INFO] Setup - Start Adobe Setup
    8/4/2014 22:47:03 [INFO] Setup - TimeLog: Bootstrapper Start
    8/4/2014 22:47:03 [INFO] Setup - TimeLog: Start initial checks
    8/4/2014 22:47:04 [INFO] Setup - Dictionary Path: E:\Adobe CS5_5\resources\Dictionary\en_US\stringTable.zdct
    8/4/2014 22:47:06 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\resources\setup.xml
    8/4/2014 22:47:07 [INFO] PIM - XML is valid
    8/4/2014 22:47:07 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:07 [INFO] Setup - Found 3 packages in setup manifest
    8/4/2014 22:47:07 [INFO] PIM - Build Version - 2.0.242.0
    8/4/2014 22:47:07 [INFO] PIM - Logging Level verbosity Set  to 4
    8/4/2014 22:47:07 [INFO] Utilities - Folder does not exist
    8/4/2014 22:47:07 [INFO] PIM - Build Version - 2.0.242.0
    8/4/2014 22:47:07 [INFO] PIM - Logging Level verbosity Set  to 4
    8/4/2014 22:47:07 [INFO] PIM - CREATE PIM Instance ...
    8/4/2014 22:47:08 [INFO] Utilities - File does not exist
    8/4/2014 22:47:08 [INFO] Utilities - File does not exist
    8/4/2014 22:47:08 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    8/4/2014 22:47:09 [INFO] PIM - SUCCESS Created Tables.
    8/4/2014 22:47:09 [INFO] PIM - PIM Database is Up To Date.
    8/4/2014 22:47:09 [INFO] PIM - Updater Inventory location:E:\Adobe CS5_5\resources\updaterinventory.dll
    8/4/2014 22:47:09 [INFO] PIM - trying to createOrUpdatePIMDbSchema.
    8/4/2014 22:47:09 [INFO] PIM - Current db schema version on machine 1.
    8/4/2014 22:47:09 [INFO] PIM - Current db schema version to install 1.
    8/4/2014 22:47:09 [INFO] PIM - PIM DB Schema is up to date. Current schema version is 1.
    8/4/2014 22:47:09 [INFO] PIM - PIM Database is Up To Date.
    8/4/2014 22:47:09 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\core\PDApp.pimx
    8/4/2014 22:47:09 [INFO] PIM - XML is valid
    8/4/2014 22:47:09 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:10 [INFO] PIM - PackageCheck: Package id E09D47A9-4501-43C1-A50B-E264DB5E498D is a old Package, new is installed on the system. Size required: 924792
    8/4/2014 22:47:10 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\UWA\UWA.pimx
    8/4/2014 22:47:10 [INFO] PIM - XML is valid
    8/4/2014 22:47:10 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:10 [INFO] PIM - PackageCheck: Package id CC1D48BA-E659-42D4-9511-F208F19C3EDC is a old Package, new is installed on the system. Size required: 2335009
    8/4/2014 22:47:10 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\DWA\DWA.pimx
    8/4/2014 22:47:10 [INFO] PIM - XML is valid
    8/4/2014 22:47:10 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:10 [INFO] PIM - PackageCheck: Package id 4F576A64-1680-4E79-B4A2-CFAC1A841C06 is a old Package, new is installed on the system. Size required: 3525373
    8/4/2014 22:47:10 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\LWA\LWA.pimx
    8/4/2014 22:47:11 [INFO] PIM - XML is valid
    8/4/2014 22:47:11 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Package id D2E20EE6-5E36-40A4-8CB2-EC0C2E0B6912 is a old Package, new is installed on the system. Size required: 6359429
    8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id CEF79D2D-B768-4000-890A-749307FC1A88 found in ACF. Size required: 2716397
    8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id CF544A33-B3C5-41EB-9A35-FF71EF87BD9D found in ACF. Size required: 237125
    8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id E4D5C1B1-86EE-4912-BC83-DCF49C6DA758 found in ACF. Size required: 5275810
    8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id 678DA613-34E3-4532-B6D4-E2C1D3D44A22 found in ACF. Size required: 6006309
    8/4/2014 22:47:11 [INFO] PIM - PackageCheck: Extra Package id EC6B3460-5E27-4FD6-80F5-1EA03E45A6DA found in ACF. Size required: 5110
    8/4/2014 22:47:11 [INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 30123889
    8/4/2014 22:47:11 [INFO] Setup - TimeLog: End initial checks
    8/4/2014 22:47:11 [INFO] Setup - TimeLog: Begin Installing
    8/4/2014 22:47:11 [INFO] Setup - Start Installing core package - E:\Adobe CS5_5\packages\core\PDApp.pimx
    8/4/2014 22:47:11 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\core\PDApp.pimx
    8/4/2014 22:47:11 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\core\PDApp.pimx
    8/4/2014 22:47:11 [INFO] PIM - XML is valid
    8/4/2014 22:47:11 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:11 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/core/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/core/
    8/4/2014 22:47:11 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:11 [INFO] Setup - Finished Installing core package - E:\Adobe CS5_5\packages\core\PDApp.pimx, Return status: 0
    8/4/2014 22:47:11 [INFO] Setup - Start Installing package - E:\Adobe CS5_5\packages\UWA\UWA.pimx
    8/4/2014 22:47:11 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\UWA\UWA.pimx
    8/4/2014 22:47:11 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\UWA\UWA.pimx
    8/4/2014 22:47:11 [INFO] PIM - XML is valid
    8/4/2014 22:47:11 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:11 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/UWA/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/UWA/
    8/4/2014 22:47:11 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:12 [INFO] Setup - Finished Installing package - E:\Adobe CS5_5\packages\UWA\UWA.pimx
    8/4/2014 22:47:12 [INFO] Setup - Start Installing package - E:\Adobe CS5_5\packages\DWA\DWA.pimx
    8/4/2014 22:47:12 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\DWA\DWA.pimx
    8/4/2014 22:47:12 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\DWA\DWA.pimx
    8/4/2014 22:47:12 [INFO] PIM - XML is valid
    8/4/2014 22:47:12 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:12 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/DWA/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/DWA/
    8/4/2014 22:47:12 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:12 [INFO] Setup - Finished Installing package - E:\Adobe CS5_5\packages\DWA\DWA.pimx
    8/4/2014 22:47:12 [INFO] Setup - Start Installing package - E:\Adobe CS5_5\packages\LWA\LWA.pimx
    8/4/2014 22:47:12 [INFO] PIM - START installPackage at file E:\Adobe CS5_5\packages\LWA\LWA.pimx
    8/4/2014 22:47:12 [INFO] PIM - Trying to access xml at path:E:\Adobe CS5_5\packages\LWA\LWA.pimx
    8/4/2014 22:47:12 [INFO] PIM - XML is valid
    8/4/2014 22:47:12 [WARN] PIM - Failed to find Node
    8/4/2014 22:47:12 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/LWA/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/LWA/
    8/4/2014 22:47:12 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:14 [INFO] Setup - Finished Installing package - E:\Adobe CS5_5\packages\LWA\LWA.pimx
    8/4/2014 22:47:14 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/P7/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/P7/
    8/4/2014 22:47:14 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:16 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/D6/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/D6/
    8/4/2014 22:47:16 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:16 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/DECore/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/DECore/
    8/4/2014 22:47:16 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:17 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/P6/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/P6/
    8/4/2014 22:47:17 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:19 [INFO] PIM - srcPath :C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\/IPC/ destPath :C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp/IPC/
    8/4/2014 22:47:19 [INFO] PIM - Function :copyPrimitive
    8/4/2014 22:47:19 [INFO] Utilities - File does not exist
    8/4/2014 22:47:20 [INFO] Setup - TimeLog: End Installing. Now launching PDApp
    8/4/2014 22:47:21 [FATAL] Setup - Adobe Application Manager executable does not exist at the location: C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp\core\PDApp.exe
    8/4/2014 22:47:21 [FATAL] Setup - Unable to launch PDApp. File missing
    8/4/2014 22:57:44 [INFO] PIM - PIMSqlite closeDB status 0
    8/4/2014 22:57:44 [INFO] PIM - PIMSqlite closeDB status 0
    8/4/2014 22:57:44 [INFO] PIM - FREE PIM Instance ...
    8/4/2014 22:57:44 [INFO] Setup - cleanUSF: Deleting Path C:\Users\Kaylene\AppData\Local\Adobe\OOBE\PDApp
    8/4/2014 22:57:44 [INFO] Setup - Setting current directory to C:\Users\Kaylene\AppData\Local\Adobe\OOBE
    8/4/2014 22:57:44 [ERROR] Setup - Error in deleting folder C:\Users\Kaylene\AppData\Local\Adobe. Error Code:145
    8/4/2014 22:57:44 [INFO] Setup - End Adobe Setup. Exit code: 1

  • When I try to open iTunes, I receive a QuickTime failed to initialize (error-2096).

    When I try to open iTunes, I receive:  "QuickTime failed to initialize (error - 2096).  It also tells me to unistall iTunes and then install iTunes again.  If I uninstall iTunes, will I lose all my songs and videos?

    Follow these instructions to completely remove Apple software
    http://support.apple.com/kb/HT1923
    Then use free Ccleaner to repeatly repair your registry until it's fixed.
    http://www.piriform.com/ccleaner/download/standard
    download iTunes again from Apple.
    http://www.apple.com/itunes/
    If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
    Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
    Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
    You should be making backups of your content regularly, either through iTunes or via copying the iTunesFolder in your Music folder to a external drive.
    Windows is notorious for having "other" issues that make it unstable, we as volunteers helping others can't always resolve those issues.
    After doing the steps above, stand by and others may be able to assist you.

  • Failed to initialize the network. Check if another instance of agent is

    Out of the blue a small number of my Windows XP PCs get the following error
    when logging in. Usually appears while login script page is on screen:-
    Failed to initialize the network. Check if another instance of agent is
    running. Contact the system administrator
    Once XP has loaded ok I can manually start the Remote Management service.
    Some PCs are intermittent and don't seem to get it again but a couple get it
    every login. I removed the client and reinstalled. I removed the Remote
    Management service and re-installed. Re-registered the PC Workstation but no
    change for those who get it every day.
    I did find this:-
    Failed to initialize the network. Check if another instance of agent is
    running. Contact the system administrator
    Source: Remote Management Agent
    Severity: Critical
    Possible Cause: The Remote Management Agent is unable to bind to the IPX or
    IP port that is being used for Remote Management service, or the ports are
    being used by some other application running on the managed workstation.
    Action: Uninstall any third-party remote control agent or remote control
    application using these ports from the managed workstation.
    Possible Cause: The protocol stack is corrupted.
    Action: Reinstall the protocol stack.
    Possible Cause: The managed workstation is not connected to the network, or
    the network is down.
    Action: Connect the managed workstation to the network.
    I don't have any third party remote control agent installed and I've tried
    the refresh of the IP protocol stack. Surprised this has started as we have
    not made any changes to the network or software. We run NW Client 4.83sp1
    and NW5.1 sp5.
    Anybody else had this and cleared it completely?

    Further developments:
    It looks like it's a fault in the nic. it's a Compaq NC3120 Fast Ethernet
    card. It used to work, but since I've wiped out the card drivers that were
    in use, I'm at HP's mercy. They are telling me that the card is no longer
    under warranty and won't even tell me what driver to look for. Anything I've
    managed to find has the exact same symptoms:
    Client works, ping to IP addresses work, ping to www.yahoo.com (etc) doesn't
    work, although winipcfg shows a DNS server the same as every other machine I
    have.
    Internet explorer doesn't work, even with IP addresses to local servers.
    And of course, zenrc32 doesn't work, wsreg32 doesn't work.
    Does anyone know of a way of making the NC3120 work on a win98 machine?
    Shall I just go buy a couple dozen netcards from a more reputable company
    than compaq?
    Chris Denby
    IT Coordinator
    Rainy River District School Board
    Fort Frances, Ontario
    Canada
    "Chris Denby" <[email protected]> wrote in message
    news:[email protected]...
    > I have this message on windows 98. In addition to that, the wsreg32.log
    > reads work station import error -1 (UNKNOWN).
    > This happened after ghosting down to the machine and finding that it had a
    > different card. The client adapted easily to a new card, but the
    zenrc32.exe
    > won't run.
    >
    > I've checked to make sure it wasn't running by renaming the zenrc32.exe to
    > zenrc32.ex so it wouldn't run on start up. Then after the machine was
    > started up, I changed it back and ran it and it died immediately with the
    > same error.
    >
    > I have uninstalled the client through admin\unc32 and removed all traces
    of
    > the client then reinstalling, but no luck.
    >
    >
    > <[email protected]> wrote in message
    > news:1XuQc.3739$8%[email protected]...
    > > Did you ever get this solved?
    > > I've got the same thing going on with one Win2000 machine in my
    > > department. He can log into the network just fine but can not get to the
    > > internet.
    > > I've tried re-installing the protocol stack; no luck. I've searched hi
    and
    > > low for any other agent running on the machine with no luck. I've
    searched
    > > the registry for hours for all keys that would start programs or agents
    at
    > > start. Can't find anything. I've check for services, checked for fire
    wall
    > > problems, viruses. No luck. Since its only one machine I can re-image it
    > > with no problem, but I'm curious and want to find out whats going on in
    > > case the problem reapears or grows to other machines.
    > > Any help out there???
    > >
    > > > Out of the blue a small number of my Windows XP PCs get the following
    > > error
    > > > when logging in. Usually appears while login script page is on
    screen:-
    > > >
    > > > Failed to initialize the network. Check if another instance of agent
    is
    > > > running. Contact the system administrator
    > > >
    > > > Once XP has loaded ok I can manually start the Remote Management
    > service.
    > > > Some PCs are intermittent and don't seem to get it again but a couple
    > > get it
    > > > every login. I removed the client and reinstalled. I removed the
    Remote
    > > > Management service and re-installed. Re-registered the PC Workstation
    > > but no
    > > > change for those who get it every day.
    > > >
    > > > I did find this:-
    > > >
    > > > Failed to initialize the network. Check if another instance of agent
    is
    > > > running. Contact the system administrator
    > > >
    > > > Source: Remote Management Agent
    > > >
    > > > Severity: Critical
    > > >
    > > > Possible Cause: The Remote Management Agent is unable to bind to the
    IPX
    > > or
    > > > IP port that is being used for Remote Management service, or the ports
    > > are
    > > > being used by some other application running on the managed
    workstation.
    > > >
    > > > Action: Uninstall any third-party remote control agent or remote
    control
    > > > application using these ports from the managed workstation.
    > > >
    > > > Possible Cause: The protocol stack is corrupted.
    > > >
    > > > Action: Reinstall the protocol stack.
    > > >
    > > > Possible Cause: The managed workstation is not connected to the
    network,
    > > or
    > > > the network is down.
    > > >
    > > > Action: Connect the managed workstation to the network.
    > > >
    > > > I don't have any third party remote control agent installed and I've
    > > tried
    > > > the refresh of the IP protocol stack. Surprised this has started as we
    > > have
    > > > not made any changes to the network or software. We run NW Client
    > 4.83sp1
    > > > and NW5.1 sp5.
    > > >
    > > > Anybody else had this and cleared it completely?
    > > >
    > > >
    > > >
    > > >
    > > >
    > >
    >
    >

  • [SOLVED] Bumblebee: Failed to initialize GPU with Lenovo ThinkPad W530

    SOLVED: See post #20
    After years, I decided to come back to the wonderful distro, Arch and back to the forums. Yay!
    However, I installed Arch to my new laptop - Lenovo ThinkPad W530 and it uses NVIDIA Quadro K1000M alongside Intel graphics with Optimus technology. Arch is running fine, but I cannot run applications through optirun and I get:
    [exitium@rambutan ~]$ optirun -vv nvidia-settings
    [ 485.536478] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 485.536909] [DEBUG]optirun version 3.2.1 starting...
    [ 485.536922] [DEBUG]Active configuration:
    [ 485.536927] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 485.536931] [DEBUG] X display: :8
    [ 485.536934] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [ 485.536938] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 485.536941] [DEBUG] Accel/display bridge: auto
    [ 485.536945] [DEBUG] VGL Compression: proxy
    [ 485.536948] [DEBUG] VGLrun extra options:
    [ 485.536952] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [ 485.536972] [DEBUG]Using auto-detected bridge virtualgl
    [ 485.537190] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 485.537204] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 485.537209] [DEBUG]Socket closed.
    [ 485.537223] [ERROR]Aborting because fallback start is disabled.
    [ 485.537229] [DEBUG]Killing all remaining processes.
    As seen, it says "Failed to initialize the NVIDIA GPU". I have tried different solutions found from these forums and several other places but none of them have worked - the problem remains same. Does anyone have idea how I could fix this? I read somewhere else that there could be issues with newest nvidia drivers - is this possible?
    bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    Option "AutoAddGPU" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Section "Device"
    Identifier "DiscreteNvidia"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    # If the X server does not automatically detect your VGA device,
    # you can manually set it here.
    # To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    # as you see in the commented example.
    # This Setting may be needed in some platforms with more than one
    # nvidia card, which may confuse the proprietary driver (e.g.,
    # trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
    BusID "PCI:01:00:0"
    # Setting ProbeAllGpus to false prevents the new proprietary driver
    # instance spawned to try to control the integrated graphics card,
    # which is already being managed outside bumblebee.
    # This option doesn't hurt and it is required on platforms running
    # more than one nvidia graphics card with the proprietary driver.
    # (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    # If this option is not set, the new Xorg may blacken the screen and
    # render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
    EndSection
    Thank you in advance!
    Last edited by Exitium (2013-12-18 11:29:54)

    Hi!
    Exactly the same issue here. Notebook -> Thinkpad W530
    Currently running on:
    linux 3.11.3-1
    nvidia 325.15-8
    nvidia-utils 325.15-1
    bbswitch 0.7-14
    Error:
    username@hostname ~ $ optirun -vv nvidia-settings
    [  839.449203] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [  839.449495] [INFO]Configured driver: nvidia
    [  839.449729] [DEBUG]optirun version 3.2.1 starting...
    [  839.449774] [DEBUG]Active configuration:
    [  839.449817] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [  839.449836] [DEBUG] X display: :8
    [  839.449856] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
    [  839.449875] [DEBUG] Socket path: /var/run/bumblebee.socket
    [  839.449890] [DEBUG] Accel/display bridge: auto
    [  839.449909] [DEBUG] VGL Compression: proxy
    [  839.449936] [DEBUG] VGLrun extra options:
    [  839.449953] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
    [  839.449996] [DEBUG]Using auto-detected bridge virtualgl
    [  839.450294] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
    [  839.450344] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
    [  839.450373] [DEBUG]Socket closed.
    [  839.450398] [ERROR]Aborting because fallback start is disabled.
    [  839.450419] [DEBUG]Killing all remaining processes.
    dmesg output:
    [   81.162604] bbswitch: enabling discrete graphics
    [   81.396637] pci 0000:01:00.0: power state changed by ACPI to D0
    [   81.396663] thinkpad_acpi: EC reports that Thermal Table has changed
    [   81.483200] nvidia: module license 'NVIDIA' taints kernel.
    [   81.483205] Disabling lock debugging due to kernel taint
    [   81.488096] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
    [   81.488289] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 1
    [   81.488294] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  325.15  Wed Jul 31 18:50:56 PDT 2013
    [   81.665938] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
    [   81.670434] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670528] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670594] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670659] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670723] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.670960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.671192] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   81.671258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.879826] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.905471] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [   85.905479] NVRM: os_pci_init_handle: invalid context!
    [   85.905481] NVRM: os_pci_init_handle: invalid context!
    [   85.905486] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
    [   85.905490] NVRM: os_pci_init_handle: invalid context!
    [   85.905491] NVRM: os_pci_init_handle: invalid context!
    [   85.930135] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930442] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930719] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.930990] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931258] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931526] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.931794] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932062] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932329] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932595] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.932862] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933129] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933396] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933662] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.933942] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934197] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934452] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934706] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.934960] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935215] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935469] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935722] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.935976] ACPI Warning: \_SB_.PCI0.PEG_.VID_._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [   85.940508] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
    [   85.940517] NVRM: rm_init_adapter(0) failed
    xorg.conf.nvidia:
    Section "ServerLayout"
        Identifier  "Layout0"
        Option      "AutoAddDevices" "false"
        Option      "AutoAddGPU" "false"
    EndSection
    Section "Device"
        Identifier  "DiscreteNvidia"
        Driver      "nvidia"
        VendorName  "NVIDIA Corporation"
    #   If the X server does not automatically detect your VGA device,
    #   you can manually set it here.
    #   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
    #   as you see in the commented example.
    #   This Setting may be needed in some platforms with more than one
    #   nvidia card, which may confuse the proprietary driver (e.g.,
    #   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
        BusID "PCI:01:00:0"
    #   Setting ProbeAllGpus to false prevents the new proprietary driver
    #   instance spawned to try to control the integrated graphics card,
    #   which is already being managed outside bumblebee.
    #   This option doesn't hurt and it is required on platforms running
    #   more than one nvidia graphics card with the proprietary driver.
    #   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
    #   If this option is not set, the new Xorg may blacken the screen and
    #   render it unusable (unless you have some way to run killall Xorg).
        Option "ProbeAllGpus" "false"
        Option "NoLogo" "true"
        Option "UseEDID" "false"
        Option "UseDisplayDevice" "none"
    EndSection
    bumblebee.conf:
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=nvidia
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # Acceleration/ rendering bridge, possible values are auto, virtualgl and
    # primus.
    Bridge=auto
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # List of paths which are searched for the primus libGL.so.1 when using
    # the primus bridge
    PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    #         bbswitch - new in BB 3, recommended if available
    #       switcheroo - vga_switcheroo method, use at your own risk
    #             none - disable PM completely
    # https://github.com/Bumblebee-Project/Bu … PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

  • [Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.

    Hi!
    I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
    [wicu@arch:~]$ optirun -vv minecraft
    [ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
    [ 4859.404220] [DEBUG]Active configuration:
    [ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 4859.404242] [DEBUG] X display: :8
    [ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
    [ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 4859.404276] [DEBUG] VGL Compression: proxy
    [ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.537053] [DEBUG]Socket closed.
    [ 4859.537086] [ERROR]Aborting because fallback start is disabled.
    [ 4859.537094] [DEBUG]Killing all remaining processes.
    [wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
    Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
    Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
    Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
    Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
    // xorg log
    [ 4859.510]
    X.Org X Server 1.13.0
    Release Date: 2012-09-05
    [ 4859.511] X Protocol Version 11, Revision 0
    [ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
    [ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
    [ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
    [ 4859.511] Build Date: 08 November 2012 07:09:29PM
    [ 4859.511]
    [ 4859.511] Current version of pixman: 0.28.0
    [ 4859.511] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
    [ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 4859.511] (==) ServerLayout "Layout0"
    [ 4859.512] (==) No screen section available. Using defaults.
    [ 4859.512] (**) |-->Screen "Default Screen Section" (0)
    [ 4859.512] (**) | |-->Monitor "<default monitor>"
    [ 4859.512] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 4859.512] (**) | |-->Device "Device1"
    [ 4859.512] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 4859.512] (**) Option "AutoAddDevices" "false"
    [ 4859.512] (**) Not automatically adding devices
    [ 4859.512] (==) Automatically enabling devices
    [ 4859.512] (==) Automatically adding GPU devices
    [ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 4859.512] Entry deleted from font path.
    [ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 4859.512] Entry deleted from font path.
    [ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 4859.512] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
    [ 4859.512] (==) |-->Input Device "<default pointer>"
    [ 4859.512] (==) |-->Input Device "<default keyboard>"
    [ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 4859.512] (II) Loader magic: 0x7fcc40
    [ 4859.512] (II) Module ABI versions:
    [ 4859.512] X.Org ANSI C Emulation: 0.4
    [ 4859.513] X.Org Video Driver: 13.1
    [ 4859.513] X.Org XInput driver : 18.0
    [ 4859.513] X.Org Server Extension : 7.0
    [ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 4859.513] setversion 1.4 failed
    [ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
    [ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 4859.516] Initializing built-in extension Generic Event Extension
    [ 4859.516] Initializing built-in extension SHAPE
    [ 4859.516] Initializing built-in extension MIT-SHM
    [ 4859.516] Initializing built-in extension XInputExtension
    [ 4859.516] Initializing built-in extension XTEST
    [ 4859.516] Initializing built-in extension BIG-REQUESTS
    [ 4859.516] Initializing built-in extension SYNC
    [ 4859.516] Initializing built-in extension XKEYBOARD
    [ 4859.516] Initializing built-in extension XC-MISC
    [ 4859.516] Initializing built-in extension SECURITY
    [ 4859.516] Initializing built-in extension XINERAMA
    [ 4859.516] Initializing built-in extension XFIXES
    [ 4859.516] Initializing built-in extension RENDER
    [ 4859.516] Initializing built-in extension RANDR
    [ 4859.516] Initializing built-in extension COMPOSITE
    [ 4859.516] Initializing built-in extension DAMAGE
    [ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
    [ 4859.516] Initializing built-in extension DOUBLE-BUFFER
    [ 4859.516] Initializing built-in extension RECORD
    [ 4859.516] Initializing built-in extension DPMS
    [ 4859.516] Initializing built-in extension X-Resource
    [ 4859.516] Initializing built-in extension XVideo
    [ 4859.516] Initializing built-in extension XVideo-MotionCompensation
    [ 4859.516] Initializing built-in extension XFree86-VidModeExtension
    [ 4859.516] Initializing built-in extension XFree86-DGA
    [ 4859.516] Initializing built-in extension XFree86-DRI
    [ 4859.516] Initializing built-in extension DRI2
    [ 4859.516] (II) LoadModule: "glx"
    [ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
    [ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
    [ 4859.526] compiled for 4.0.2, module version = 1.0.0
    [ 4859.526] Module class: X.Org Server Extension
    [ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
    [ 4859.526] Loading extension GLX
    [ 4859.526] (II) LoadModule: "nvidia"
    [ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 4859.526] compiled for 4.0.2, module version = 1.0.0
    [ 4859.526] Module class: X.Org Video Driver
    [ 4859.526] (II) LoadModule: "mouse"
    [ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
    [ 4859.527] compiled for 1.13.0, module version = 1.8.1
    [ 4859.527] Module class: X.Org XInput Driver
    [ 4859.527] ABI class: X.Org XInput driver, version 18.0
    [ 4859.527] (II) LoadModule: "kbd"
    [ 4859.527] (WW) Warning, couldn't open module kbd
    [ 4859.527] (II) UnloadModule: "kbd"
    [ 4859.527] (II) Unloading kbd
    [ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
    [ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 4859.527] (--) using VT number 7
    [ 4859.527] (II) Loading sub module "wfb"
    [ 4859.527] (II) LoadModule: "wfb"
    [ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
    [ 4859.527] compiled for 1.13.0, module version = 1.0.0
    [ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 4859.527] (II) Loading sub module "ramdac"
    [ 4859.527] (II) LoadModule: "ramdac"
    [ 4859.527] (II) Module "ramdac" already built-in
    [ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 4859.527] (==) NVIDIA(0): RGB weight 888
    [ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
    [ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
    [ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
    [ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
    [ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
    [ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
    [ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
    [ 4859.534] (EE) NVIDIA(0): README for additional information.
    [ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    [ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 4859.534] (II) UnloadModule: "nvidia"
    [ 4859.534] (II) UnloadSubModule: "wfb"
    [ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
    [ 4859.534]
    Fatal server error:
    [ 4859.534] no screens found
    [ 4859.534] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    [ 4859.534] (EE)
    [ 4859.534] Server terminated with error (1). Closing log file.
    [wicu@arch:~]$ lspci | grep VGA
    3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
    [wicu@arch:~]$ primusrun minecraft
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    asdf
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    27 achievements
    208 recipes
    Setting user: Druedain, -4246576297828159265
    primus: fatal: failure contacting bumblebee daemon
    [18:05:39 - wicu@arch:~]$ primusrun minecraft
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    asdf
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    27 achievements
    208 recipes
    Setting user: Druedain, -7896572405277476304
    primus: fatal: failure contacting bumblebee daemon
    [wicu@arch:~]$ systemctl | grep bumblebee
    35:bumblebeed.service

    [wicu@arch:~]$ dmesg | grep nvidia
    782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
    784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
    [wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
    # Configuration file for Bumblebee. Values should **not** be put between quotes
    ## Server options. Any change made in this section will need a server restart
    # to take effect.
    [bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=false
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=
    ## Client options. Will take effect on the next optirun executed.
    [optirun]
    # The method used for VirtualGL to transport frames between X servers.
    # Possible values are proxy, jpeg, rgb, xv and yuv.
    VGLTransport=proxy
    # Should the program run under optirun even if Bumblebee server or nvidia card
    # is not available?
    AllowFallbackToIGC=false
    # Driver-specific settings are grouped under [driver-NAME]. The sections are
    # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
    # detection resolves to NAME).
    # PMMethod: method to use for saving power by disabling the nvidia card, valid
    # values are: auto - automatically detect which PM method to use
    # bbswitch - new in BB 3, recommended if available
    # switcheroo - vga_switcheroo method, use at your own risk
    # none - disable PM completely
    # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
    ## Section with nvidia driver specific options, only parsed if Driver=nvidia
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    Module=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
    ## Section with nouveau driver specific options, only parsed if Driver=nouveau
    [driver-nouveau]
    KernelDriver=nouveau
    PMMethod=auto
    XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
    [wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
    Section "ServerLayout"
    Identifier "Layout0"
    Option "AutoAddDevices" "false"
    EndSection
    Section "Device"
    Identifier "Device1"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "ConnectedMonitor" "DFP"
    EndSection

  • Installer failed to initialize

    I am getting an "Installer failed to initialize" error while trying to install PSE 9 from a DVD and PSE 10 from a download. I download Adobe Support Advisor but it crashes without giving any error message. Located PDApp.log for the failed PSE 9 installation. It shows the following errors:
    [FATAL] PIM - Error Failed to mount the package dmg.
    [FATAL] PIM - Error Failed to extract assets...
    [FATAL] Setup - Error installing core /Volumes/Photoshop Elements 9/Adobe Photoshop Elements 9/packages/core/PDApp.pimx package. pim_installPackage returned -8
    [FATAL] Setup - Error installing Packages.
    Unable to find any log file for the PSE 10 failed install.
    Have tried creating a fresh user account with admin privilages but that didn't help. Also tried complete shut down & reboot.
    System: Mac OS 10.6.8, 4gb ram, plenty of HD free space, firewall off, no virus protection installed.
    Hardware: iMac 2.4gh
    Operator: moron
    What's the next step?

    I'm having the same issue.
    PowerMac 2x2.66Ghz 6-Core Intel Xeon,
    24GB RAM
    Mac OS X 10.6.8
    I followed the suggestions above without a positive resolution to the issue:
    Tried installing with Firefox/Chrome open: nothing
    Tried installing with Adobe AIR.framework removed: nothing
    Here is the system log:
    Mar 27 13:20:57 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[789]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -updatecheck
    Mar 27 13:20:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 27 13:20:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Commandline is: -updatecheck
    Mar 27 13:20:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Installed runtime (2.5.1.17730) located at /Library/Frameworks/Adobe AIR.framework
    Mar 27 13:20:58 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Performing pingback request
    Mar 27 13:20:58 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Starting runtime background update check
    Mar 27 13:20:58 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Clearing unused background update directory
    Mar 27 13:20:58 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Begin Background update download from http://airdownload.adobe.com/air/3/background/macos/x86/patch/2.5.1.17730/update
    Mar 27 13:20:58 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Unpackaging http://airdownload.adobe.com/air/3/background/macos/x86/patch/2.5.1.17730/update to /Users/color1/Library/Application Support/Adobe/AIR/Updater/Background
    Mar 27 13:21:37 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Unpackaging complete
    Mar 27 13:21:37 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Download success
    Mar 27 13:21:37 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Runtime updated downloaded
    Mar 27 13:21:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: User has selected immediate install of the update
    Mar 27 13:21:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Starting runtime background update installation
    Mar 27 13:21:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Launching subprocess with commandline /Users/color1/Library/Application Support/Adobe/AIR/Updater/Background/updater -update
    Mar 27 13:21:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Runtime updater successfully launched
    Mar 27 13:21:57 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[804]: Runtime Installer end with exit code 0
    Mar 27 13:22:01 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airUbjHko/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[843]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 27 13:22:01 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airUbjHko/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[843]: Commandline is: -update
    Mar 27 13:22:01 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airUbjHko/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[843]: Installed runtime (2.5.1.17730) located at /Library/Frameworks/Adobe AIR.framework
    Mar 27 13:22:28 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airUbjHko/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[843]: Runtime Installer end with exit code 6
    Mar 27 13:22:31 Administrators-Mac-Pro ReportCrash[853]: Saved crash report for Adobe AIR Installer[843] version 3.1 (3.1.0.4880) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-132231_Administrators-Mac-Pro.crash
    Mar 27 13:22:48 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[881]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 27 13:22:48 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[881]: Commandline is: -psn_0_176171
    Mar 27 13:22:48 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[881]: Installed runtime (2.5.1.17730) located at /Library/Frameworks/Adobe AIR.framework
    Mar 27 13:29:12 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[881]: Runtime Installer end with exit code 6
    Mar 27 13:29:13 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x2b02b].com.adobe.air.Installer[881]): Job appears to have crashed: Bus error
    Mar 27 13:29:13 Administrators-Mac-Pro ReportCrash[970]: Saved crash report for Adobe AIR Installer[881] version 3.1 (3.1.0.4880) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-132913_Administrators-Mac-Pro.crash
    Mar 27 13:29:17 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[974]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 27 13:29:17 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[974]: Commandline is: -psn_0_229432
    Mar 27 13:29:17 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[974]: Installed runtime (2.5.1.17730) located at /Library/Frameworks/Adobe AIR.framework
    Mar 27 13:30:21 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[974]: Runtime Installer end with exit code 6
    Mar 27 13:30:21 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x38038].com.adobe.air.Installer[974]): Job appears to have crashed: Bus error
    Mar 27 13:30:22 Administrators-Mac-Pro ReportCrash[1006]: Saved crash report for Adobe AIR Installer[974] version 3.1 (3.1.0.4880) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-133022_Administrators-Mac-Pro.crash
    Mar 27 13:32:25 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1054]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 27 13:32:25 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1054]: Commandline is: -psn_0_266305
    Mar 27 13:32:25 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1054]: No installed runtime detected
    Mar 27 13:35:08 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1054]: Runtime Installer end with exit code 6
    Mar 27 13:35:08 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x41041].com.adobe.air.Installer[1054]): Job appears to have crashed: Bus error
    Mar 27 13:35:09 Administrators-Mac-Pro ReportCrash[1097]: Saved crash report for Adobe AIR Installer[1054] version 3.1 (3.1.0.4880) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-133509_Administrators-Mac-Pro.crash
    Mar 27 13:35:17 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x47047].com.adobe.air.Installer[1101]): Exited: Killed
    Mar 27 13:42:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[455]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 27 13:42:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[455]: Commandline is: -psn_0_127007
    Mar 27 13:42:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[455]: No installed runtime detected
    Mar 27 13:46:54 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[455]: Runtime Installer end with exit code 6
    Mar 27 13:46:57 Administrators-Mac-Pro com.apple.launchd.peruser.502[210] ([0x0-0x1f01f].com.adobe.air.Installer[455]): Exited: Killed
    Mar 27 14:48:04 Administrators-Mac-Pro SubmitDiagInfo[1019]: Removed expired file /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-13-120742_Administrators-Mac-Pro.crash
    Mar 28 13:41:21 Administrators-Mac-Pro SubmitDiagInfo[3332]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-132231_Administrators-Mac-Pro.crash
    Mar 28 13:41:22 Administrators-Mac-Pro SubmitDiagInfo[3332]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-132913_Administrators-Mac-Pro.crash
    Mar 28 13:41:23 Administrators-Mac-Pro SubmitDiagInfo[3332]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-133022_Administrators-Mac-Pro.crash
    Mar 28 13:41:24 Administrators-Mac-Pro SubmitDiagInfo[3332]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-27-133509_Administrators-Mac-Pro.crash
    Mar 28 17:13:45 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5376]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:13:45 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5376]: Commandline is: -psn_0_573580
    Mar 28 17:13:45 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5376]: No installed runtime detected
    Mar 28 17:18:24 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5376]: Runtime Installer end with exit code 6
    Mar 28 17:18:27 Administrators-Mac-Pro com.apple.launchd.peruser.502[206] ([0x0-0x8c08c].com.adobe.air.Installer[5376]): Exited: Killed
    Mar 28 17:18:42 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5449]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:18:42 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5449]: Commandline is: -psn_0_598162
    Mar 28 17:18:42 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5449]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:18:54 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[5456]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -eula
    Mar 28 17:18:55 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[5458]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 28 17:18:55 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[5458]: Commandline is: -eula
    Mar 28 17:18:55 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[5458]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:18:55 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[5458]: Starting eula display
    Mar 28 17:19:10 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[5449]: Runtime Installer end with exit code 6
    Mar 28 17:19:13 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[5458]: Finished eula display
    Mar 28 17:19:13 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[5458]: Runtime Installer end with exit code 0
    Mar 28 17:19:14 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[5456]: Subprocess /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater failed (1)
    Mar 28 17:19:14 Administrators-Mac-Pro com.apple.launchd.peruser.502[206] ([0x0-0x92092].com.adobe.air.Installer[5449]): Job appears to have crashed: Bus error
    Mar 28 17:19:14 Administrators-Mac-Pro ReportCrash[5462]: Saved crash report for Adobe AIR Installer[5458] version 3.1 (3.1.0.4880) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-171914_Administrators-Mac-Pro.crash
    Mar 28 17:19:14 Administrators-Mac-Pro ReportCrash[5462]: Saved crash report for Adobe AIR Installer[5449] version 3.2 (3.2.0.2070) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-171914-1_Administrators-Mac-Pro.crash
    Mar 28 17:21:05 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[401]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -eula
    Mar 28 17:21:05 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[406]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 28 17:21:05 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[406]: Commandline is: -eula
    Mar 28 17:21:05 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[406]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:21:06 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[406]: Starting eula display
    Mar 28 17:22:06 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[406]: Finished eula display
    Mar 28 17:22:06 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[406]: Runtime Installer end with exit code 0
    Mar 28 17:22:09 Administrators-Mac-Pro ReportCrash[430]: Saved crash report for Adobe AIR Installer[406] version 3.1 (3.1.0.4880) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-172209_Administrators-Mac-Pro.crash
    Mar 28 17:22:16 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[435]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -eula
    Mar 28 17:22:16 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[438]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 28 17:22:16 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[438]: Commandline is: -eula
    Mar 28 17:22:16 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[438]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:22:17 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[438]: Starting eula display
    Mar 28 17:22:43 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[438]: Finished eula display
    Mar 28 17:22:43 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[438]: Runtime Installer end with exit code 0
    Mar 28 17:23:04 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[470]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:23:04 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[470]: Commandline is: -psn_0_147492
    Mar 28 17:23:04 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[470]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:23:16 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[470]: Runtime Installer end with exit code 6
    Mar 28 17:23:16 Administrators-Mac-Pro com.apple.launchd.peruser.502[206] ([0x0-0x24024].com.adobe.air.Installer[470]): Exited with exit code: 6
    Mar 28 17:23:24 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[476]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -eula
    Mar 28 17:23:25 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[478]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 28 17:23:25 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[478]: Commandline is: -eula
    Mar 28 17:23:25 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[478]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:23:25 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[478]: Starting eula display
    Mar 28 17:23:49 Administrators-Mac-Pro /Applications/Pandora.app/Contents/MacOS/Pandora[494]: Launching subprocess with commandline /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater -eula
    Mar 28 17:23:50 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[496]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 28 17:23:50 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[496]: Commandline is: -eula
    Mar 28 17:23:50 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[496]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:23:50 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[496]: Starting eula display
    Mar 28 17:24:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[478]: Finished eula display
    Mar 28 17:24:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[478]: Runtime Installer end with exit code 0
    Mar 28 17:24:50 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[496]: Finished eula display
    Mar 28 17:24:50 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[496]: Runtime Installer end with exit code 0
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: Performing runtime install
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: UI SWF load is complete
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: UI initialized
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: starting user confirmation
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: Version of this installer: 2.0.3.13070
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: Installed version: 3.1.0.4880
    Mar 28 17:26:23 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: Installation type: patchOlder
    Mar 28 17:26:32 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[559]: begin quitting
    Mar 28 17:26:32 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Runtime Installer begin with version 3.1.0.4880 on Mac OS 10.6.8 x86
    Mar 28 17:26:32 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Commandline is: -installupdatecheck
    Mar 28 17:26:32 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:26:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Performing pingback request
    Mar 28 17:26:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Pingback request completed with HTTP status 200
    Mar 28 17:26:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Starting runtime background update check
    Mar 28 17:26:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Begin Background update download from http://airdownload.adobe.com/air/3/background/macos10.6/x86/patch/3.1.0.4880/update
    Mar 28 17:26:33 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Unpackaging http://airdownload.adobe.com/air/3/background/macos10.6/x86/patch/3.1.0.4880/update to /Users/color1/Library/Application Support/Adobe/AIR/Updater/Background
    Mar 28 17:26:44 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Unpackaging complete
    Mar 28 17:26:45 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Download success
    Mar 28 17:26:45 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Runtime updated downloaded
    Mar 28 17:26:48 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: User has selected immediate install of the update
    Mar 28 17:26:48 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Starting runtime background update installation
    Mar 28 17:26:48 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Launching subprocess with commandline /Users/color1/Library/Application Support/Adobe/AIR/Updater/Background/updater -update
    Mar 28 17:26:48 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Runtime updater successfully launched
    Mar 28 17:26:48 Administrators-Mac-Pro /Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/Adobe AIR Updater.app/Contents/MacOS/Adobe AIR Installer[563]: Runtime Installer end with exit code 0
    Mar 28 17:26:53 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airRQUiZ1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:26:53 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airRQUiZ1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Commandline is: -update
    Mar 28 17:26:53 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airRQUiZ1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:28:12 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 28 17:28:12 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Commandline is: -psn_0_245820
    Mar 28 17:28:12 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:28:16 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Relaunching with elevation
    Mar 28 17:28:16 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Launching subprocess with commandline /Applications/Utilities/Adobe AIR Uninstaller.app -eu
    Mar 28 17:28:18 Administrators-Mac-Pro authexec[594]: executing /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[594]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[594]: Commandline is: -eu
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[594]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[594]: Starting runtime uninstall. Uninstalling runtime version 3.1.0.4880
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[594]: Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: uninstaller is older than installed version" errorID=5026]
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: uninstaller is older than installed version" errorID=5026]
    Mar 28 17:28:18 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[594]: Runtime Installer end with exit code 7
    Mar 28 17:28:25 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[589]: Runtime Installer end with exit code 7
    Mar 28 17:28:25 Administrators-Mac-Pro com.apple.launchd.peruser.502[206] ([0x0-0x3c03c].com.adobe.air.Installer[589]): Exited with exit code: 7
    Mar 28 17:28:34 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[596]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:28:34 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[596]: Commandline is: -psn_0_258111
    Mar 28 17:28:34 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[596]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:28:47 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[596]: Runtime Installer end with exit code 6
    Mar 28 17:28:48 Administrators-Mac-Pro com.apple.launchd.peruser.502[206] ([0x0-0x3f03f].com.adobe.air.Installer[596]): Job appears to have crashed: Bus error
    Mar 28 17:28:48 Administrators-Mac-Pro ReportCrash[601]: Saved crash report for Adobe AIR Installer[596] version 3.2 (3.2.0.2070) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-172848_Administrators-Mac-Pro.crash
    Mar 28 17:28:54 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airRQUiZ1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Runtime Installer end with exit code 6
    Mar 28 17:29:07 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 28 17:29:07 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Commandline is: -psn_0_270402
    Mar 28 17:29:07 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:29:13 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Relaunching with elevation
    Mar 28 17:29:13 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Launching subprocess with commandline /Applications/Utilities/Adobe AIR Uninstaller.app -eu
    Mar 28 17:29:15 Administrators-Mac-Pro authexec[613]: executing /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[613]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[613]: Commandline is: -eu
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[613]: Installed runtime (3.1.0.4880) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[613]: Starting runtime uninstall. Uninstalling runtime version 3.1.0.4880
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[613]: Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: uninstaller is older than installed version" errorID=5026]
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: uninstaller is older than installed version" errorID=5026]
    Mar 28 17:29:15 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[613]: Runtime Installer end with exit code 7
    Mar 28 17:29:17 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[610]: Runtime Installer end with exit code 7
    Mar 28 17:29:17 Administrators-Mac-Pro com.apple.launchd.peruser.502[206] ([0x0-0x42042].com.adobe.air.Installer[610]): Exited with exit code: 7
    Mar 28 17:48:05 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 28 17:48:05 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Commandline is: -psn_0_135201
    Mar 28 17:48:05 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:48:08 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Relaunching with elevation
    Mar 28 17:48:08 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Launching subprocess with commandline /Applications/Utilities/Adobe AIR Uninstaller.app -eu
    Mar 28 17:48:09 Administrators-Mac-Pro authexec[480]: executing /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer
    Mar 28 17:48:09 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[480]: Runtime Installer begin with version 2.5.1.17730 on Mac OS 10.6.8 x86
    Mar 28 17:48:09 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[480]: Commandline is: -eu
    Mar 28 17:48:09 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[480]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Mar 28 17:48:10 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[480]: Starting runtime uninstall. Uninstalling runtime version 1.5.3.9120
    Mar 28 17:48:13 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[480]: Runtime Installer end with exit code 0
    Mar 28 17:48:13 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Elevated install completed
    Mar 28 17:48:13 Administrators-Mac-Pro /Applications/Utilities/Adobe AIR Uninstaller.app/Contents/MacOS/Adobe AIR Installer[477]: Runtime Installer end with exit code 0
    Mar 28 17:48:57 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[513]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:48:57 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[513]: Commandline is: -psn_0_167977
    Mar 28 17:48:57 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[513]: No installed runtime detected
    Mar 28 17:53:04 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[513]: Runtime Installer end with exit code 6
    Mar 28 17:53:07 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x29029].com.adobe.air.Installer[513]): Exited: Killed
    Mar 28 17:56:24 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[608]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:56:24 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[608]: Commandline is:
    Mar 28 17:56:24 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[608]: No installed runtime detected
    Mar 28 17:58:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[630]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 28 17:58:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[630]: Commandline is: -psn_0_217141
    Mar 28 17:58:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[630]: No installed runtime detected
    Mar 28 18:01:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[630]: Runtime Installer end with exit code 6
    Mar 28 18:01:12 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x35035].com.adobe.air.Installer[630]): Exited: Killed
    Mar 28 18:02:49 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: Performing runtime install
    Mar 28 18:02:49 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: UI SWF load is complete
    Mar 28 18:02:49 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: UI initialized
    Mar 28 18:02:49 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: starting user confirmation
    Mar 28 18:02:49 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: Version of this installer: 2.0.2.12610
    Mar 28 18:02:49 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: Installation type: new
    Mar 28 18:03:07 Administrators-Mac-Pro /Volumes/Adobe AIR 1/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[698]: begin quitting
    Mar 28 18:03:10 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x3c03c].com.adobe.air.Installer[698]): Exited: Killed
    Mar 28 18:07:43 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[460]: Runtime Installer begin with version 3.0.0.4080 on Mac OS 10.6.8 x86
    Mar 28 18:07:43 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[460]: Commandline is: -psn_0_135201
    Mar 28 18:07:43 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[460]: No installed runtime detected
    Mar 28 18:12:54 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[460]: Runtime Installer end with exit code 6
    Mar 28 18:12:57 Administrators-Mac-Pro com.apple.launchd.peruser.502[205] ([0x0-0x21021].com.adobe.air.Installer[460]): Exited: Killed
    Mar 29 08:30:42 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Runtime Installer begin with version 2.7.1.19610 on Mac OS 10.6.8 x86
    Mar 29 08:30:42 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Commandline is: -psn_0_167977
    Mar 29 08:30:42 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: No installed runtime detected
    Mar 29 08:33:03 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[577]: Runtime Installer end with exit code 6
    Mar 29 08:33:06 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x29029].com.adobe.air.Installer[577]): Exited: Killed
    Mar 29 08:33:43 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x2b02b].com.adobe.air.ApplicationInstaller[620]): Exited with exit code: 4
    Mar 29 08:37:49 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x19019].com.adobe.air.ApplicationInstaller[417]): Exited with exit code: 4
    Mar 29 08:38:18 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x1e01e].com.adobe.air.ApplicationInstaller[441]): Exited with exit code: 4
    Mar 29 08:38:25 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[443]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 29 08:38:25 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[443]: Commandline is: -psn_0_127007
    Mar 29 08:38:25 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[443]: No installed runtime detected
    Mar 29 08:38:39 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x21021].com.adobe.air.ApplicationInstaller[449]): Exited with exit code: 4
    Mar 29 08:39:27 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[443]: Runtime Installer end with exit code 6
    Mar 29 08:39:30 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x1f01f].com.adobe.air.Installer[443]): Exited: Killed
    Mar 29 08:39:58 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x22022].com.adobe.air.ApplicationInstaller[462]): Exited with exit code: 6
    Mar 29 08:40:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[472]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Mar 29 08:40:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[472]: Commandline is: -psn_0_143395
    Mar 29 08:40:09 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[472]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Mar 29 08:40:30 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x25025].com.adobe.air.ApplicationInstaller[481]): Exited with exit code: 6
    Mar 29 08:40:41 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[472]: Runtime Installer end with exit code 6
    Mar 29 08:40:44 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x23023].com.adobe.air.Installer[472]): Exited: Killed
    Mar 29 08:42:14 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[525]: Runtime Installer begin with version 3.0.0.4080 on Mac OS 10.6.8 x86
    Mar 29 08:42:14 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[525]: Commandline is: -psn_0_192559
    Mar 29 08:42:14 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[525]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Mar 29 08:42:41 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[525]: Runtime Installer end with exit code 6
    Mar 29 08:42:44 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x2f02f].com.adobe.air.Installer[525]): Exited: Killed
    Mar 29 08:43:08 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[538]: Runtime Installer begin with version 3.0.0.4080 on Mac OS 10.6.8 x86
    Mar 29 08:43:08 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[538]: Commandline is: -psn_0_217141
    Mar 29 08:43:08 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[538]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Mar 29 08:43:32 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[538]: Runtime Installer end with exit code 6
    Mar 29 08:43:35 Administrators-Mac-Pro com.apple.launchd.peruser.502[208] ([0x0-0x35035].com.adobe.air.Installer[538]): Exited: Killed
    Apr  4 14:32:19 Administrators-Mac-Pro SubmitDiagInfo[986]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-171914-1_Administrators-Mac-Pro.crash
    Apr  4 14:32:20 Administrators-Mac-Pro SubmitDiagInfo[986]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-171914_Administrators-Mac-Pro.crash
    Apr  4 14:32:21 Administrators-Mac-Pro SubmitDiagInfo[986]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-172209_Administrators-Mac-Pro.crash
    Apr  4 14:32:22 Administrators-Mac-Pro SubmitDiagInfo[986]: Submitted crash report: /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-03-28-172848_Administrators-Mac-Pro.crash
    Apr  6 07:59:52 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airxKgf0W/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[475]: Runtime Installer begin with version 2.7.1.19610 on Mac OS 10.6.8 x86
    Apr  6 07:59:52 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airxKgf0W/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[475]: Commandline is: -update
    Apr  6 07:59:52 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airxKgf0W/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[475]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Apr  6 08:05:47 Administrators-Mac-Pro /var/folders/Ye/YeRSrZbKFuiakqwevh31qU+++TM/-Tmp-/airxKgf0W/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[475]: Runtime Installer end with exit code 6
    Apr  6 08:05:50 Administrators-Mac-Pro ReportCrash[532]: Saved crash report for Adobe AIR Installer[475] version 2.7.1 (2.7.1.19610) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-04-06-080550_Administrators-Mac-Pro.crash
    Apr  6 08:08:40 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[640]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Apr  6 08:08:40 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[640]: Commandline is: -psn_0_167977
    Apr  6 08:08:40 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[640]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Apr  6 08:09:35 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[640]: Runtime Installer end with exit code 6
    Apr  6 08:09:36 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x29029].com.adobe.air.Installer[640]): Job appears to have crashed: Bus error
    Apr  6 08:09:36 Administrators-Mac-Pro ReportCrash[654]: Saved crash report for Adobe AIR Installer[640] version 3.2 (3.2.0.2070) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-04-06-080936_Administrators-Mac-Pro.crash
    Apr  6 08:49:38 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1065]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Apr  6 08:49:38 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1065]: Commandline is: -psn_0_241723
    Apr  6 08:49:38 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1065]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Apr  6 08:50:10 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[1065]: Runtime Installer end with exit code 6
    Apr  6 08:50:13 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x3b03b].com.adobe.air.Installer[1065]): Job appears to have crashed: Bus error
    Apr  6 08:50:13 Administrators-Mac-Pro ReportCrash[1074]: Saved crash report for Adobe AIR Installer[1065] version 3.2 (3.2.0.2070) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-04-06-085013_Administrators-Mac-Pro.crash
    Apr  6 09:05:03 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[3955]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Apr  6 09:05:03 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[3955]: Commandline is: -psn_0_303178
    Apr  6 09:05:03 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[3955]: Installed runtime (1.5.3.9120) located at /Library/Frameworks/Adobe AIR.framework
    Apr  6 09:05:51 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[3955]: Runtime Installer end with exit code 6
    Apr  6 09:05:54 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x4a04a].com.adobe.air.Installer[3955]): Exited: Killed
    Apr  6 09:10:31 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[4034]: Runtime Installer begin with version 3.2.0.2070 on Mac OS 10.6.8 x86
    Apr  6 09:10:31 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[4034]: Commandline is: -psn_0_335954
    Apr  6 09:10:31 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[4034]: No installed runtime detected
    Apr  6 09:12:38 Administrators-Mac-Pro /Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer[4034]: Runtime Installer end with exit code 6
    Apr  6 09:12:42 Administrators-Mac-Pro com.apple.launchd.peruser.502[204] ([0x0-0x52052].com.adobe.air.Installer[4034]): Job appears to have crashed: Bus error
    Apr  6 09:12:42 Administrators-Mac-Pro ReportCrash[4073]: Saved crash report for Adobe AIR Installer[4034] version 3.2 (3.2.0.2070) to /Users/color1/Library/Logs/DiagnosticReports/Adobe AIR Installer_2012-04-06-091242_Administrators-Mac-Pro.crash

  • Installer failed to initialize / cpsid_83578r3 / CS5 on OSX Mavericks

    I own Adobe CS5 PRODUCTION PREMIUM and have successfully used it for a number of years on my Mac OS X computer. Recently I could not get After Effects to open so I uninstalled it, intending to reinstall it. I have recently installed the new Mac OS X "Mavericks" on my computer. Right now, I cannot get the disc installer to work--I get an error saying, "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." which I did:
    cpsid_83578r3: Error, "Validate license at Pre-chrome" when installing - Creative Suite 5
    Click here for details and corrective actions related to this issue.
    I have searched Adobe forums for solutions. However, I have found no solutions. I REALLY need this software to work for my new job. What do I need to do to get AE to install from my CS5 Production Premium discs? I can still use other CS5 programs, but not AE...please help!

    Jneigh there is no need to post your token number as the service which allows us to collect the installation logs is no longer available.
    Did you complete the steps in the referenced document at Install log error "Validate license at Pre-Chrome time" - http://helpx.adobe.com/creative-suite/kb/install-log-error-validate-license.html?

  • Premiere Elements 13 - Installer fail to initialize

    Hello
    I am receiving a "installer failed to initialize" error, when trying to install Premiere Elements 13.
    OS: Windows 8.1
    I HAVE tried the below, but I do not have the program on the list to uninstall when I get to the Control Panel Programs list.
    Please refer to the help document below:
    Error "Installer Failed to Initialize" | Install desktop application | Windows
    ANY advice would be really appreciated.
    Thanks
    Briain

    Changed file permissions as advised, and ran the install again, receiving the below log update. Would Adobe Application Manager help?
    Thanks for your continued help
    Briain
    12/24/14 23:10:18:516 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | Build Version - 8.0.0.147
    12/24/14 23:10:18:516 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | Logging Level verbosity Set  to 4
    12/24/14 23:10:18:531 | [INFO] |  | ASU | Setup |  |  |  | 2280 | Event Guid generated is: 'b84aa27d-9707-4bb5-8178-ef71053e1f61'
    12/24/14 23:10:18:531 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | Start Adobe Setup
    12/24/14 23:10:18:531 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | TimeLog: Bootstrapper Start
    12/24/14 23:10:18:531 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | TimeLog: Start initial checks
    12/24/14 23:10:18:547 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | Dictionary Path: C:\Users\briai_000\Desktop\Adobe Premiere Elements 13\PRE 13\resources\Dictionary\en_US\stringTable.zdct
    12/24/14 23:10:18:547 | [INFO] |  | ASU | Setup |  |  |  | 5108 | Event with guid 'b84aa27d-9707-4bb5-8178-ef71053e1f61' is being sent
    12/24/14 23:10:18:562 | [INFO] |  | ASU | Setup | PIM |  |  | 2280 | XML is valid
    12/24/14 23:10:18:562 | [WARN] |  | ASU | Setup | PIM |  |  | 2280 | Failed to find Node
    12/24/14 23:10:18:594 | [INFO] |  | ASU | Setup |  |  |  | 5108 | GetIEProxyInfo - No default proxy present on the user machine
    12/24/14 23:10:18:594 | [INFO] |  | ASU | Setup |  |  |  | 5108 | GetIEProxyInfo - proxy Url is
    12/24/14 23:10:19:318 | [INFO] |  | ASU | Setup |  |  |  | 5472 | HTTP Request Status code 200.
    12/24/14 23:10:19:318 | [INFO] |  | ASU | Setup |  |  |  | 5108 | The http request returned HTTP_Status:0 HttpCommunicator error:0
    12/24/14 23:10:31:652 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | Build Version - 8.0.0.147
    12/24/14 23:10:31:683 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | Logging Level verbosity Set  to 4
    12/24/14 23:10:31:683 | [INFO] |  | ASU | PIM | Utilities |  |  | 4080 | Folder does not exist
    12/24/14 23:10:31:683 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | Build Version - 8.0.0.147
    12/24/14 23:10:31:683 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | Logging Level verbosity Set  to 4
    12/24/14 23:10:31:683 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | CREATE PIM Instance ...
    12/24/14 23:10:31:761 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | trying to createOrUpdatePIMDbSchema.
    12/24/14 23:10:31:964 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | SUCCESS Created Tables.
    12/24/14 23:10:31:964 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | PIM Database is Up To Date.
    12/24/14 23:10:31:964 | [INFO] |  | ASU | PIM | PIM |  |  | 4080 | Updater Inventory location:C:\Users\briai_000\Desktop\Adobe Premiere Elements 13\PRE 13\resources\updaterinventory.dll
    12/24/14 23:10:31:980 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | TimeLog: End initial checks
    12/24/14 23:10:31:980 | [INFO] |  | ASU | Setup | Setup |  |  | 5256 | TimeLog: Begin Installing
    12/24/14 23:10:32:027 | [INFO] |  | ASU | PIM | PIM |  |  | 5256 | Current OS version is: Major:6, Minor:3, ServicePack:0
    12/24/14 23:10:33:577 | [INFO] |  | ASU | PIM | PIM |  |  | 5256 | trying to createOrUpdatePIMDbSchema.
    12/24/14 23:10:33:624 | [FATAL] |  | ASU | PIM | PIM |  |  | 5256 | Error could not executeGeneralSQLQuery.
    12/24/14 23:10:33:624 | [FATAL] |  | ASU | PIM | PIM |  |  | 5256 | Failed select count(*) from sqlite_master.
    12/24/14 23:10:33:624 | [FATAL] |  | ASU | PIM | PIM |  |  | 5256 |  attempt to write a readonly database.
    12/24/14 23:10:33:624 | [FATAL] |  | ASU | PIM | PIM |  |  | 5256 | Error in Get Table count.
    12/24/14 23:10:33:624 | [FATAL] |  | ASU | PIM | PIM |  |  | 5256 | ERROR Failed select count(*) from sqlite_master.
    12/24/14 23:10:33:624 | [ERROR] |  | ASU | PIM | PIM |  |  | 5256 | Could not createOrUpdatePIMDbSchema.
    12/24/14 23:10:33:624 | [INFO] |  | ASU | PIM | PIM |  |  | 5256 | PIMSqlite closeDB status 0
    12/24/14 23:10:33:624 | [ERROR] |  | ASU | PIM | PIM |  |  | 5256 | Failed to initialize ACF pim.db. Database is corrupted. Download a new copy of Adobe Application Manager from http://www.adobe.com,or install this product again.
    12/24/14 23:10:33:624 | [INFO] |  | ASU | Setup | Setup |  |  | 5256 | TimeLog: End Installing. Now launching PDApp
    12/24/14 23:10:34:139 | [INFO] |  | ASU | Setup |  |  |  | 5256 | Event Guid generated is: '45a9853e-11d7-44f2-8491-a478bb25a45c'
    12/24/14 23:10:34:139 | [INFO] |  | ASU | Setup |  |  |  | 5256 | Event Guid generated is: '86444b4c-74ef-4a0a-8f0b-ec1047ada721'
    12/24/14 23:10:34:156 | [INFO] |  | ASU | Setup |  |  |  | 5108 | Event with guid '45a9853e-11d7-44f2-8491-a478bb25a45c' is being sent
    12/24/14 23:10:34:156 | [INFO] |  | ASU | Setup |  |  |  | 5108 | GetIEProxyInfo - No default proxy present on the user machine
    12/24/14 23:10:34:156 | [INFO] |  | ASU | Setup |  |  |  | 5108 | GetIEProxyInfo - proxy Url is
    12/24/14 23:10:34:765 | [INFO] |  | ASU | Setup |  |  |  | 5500 | HTTP Request Status code 200.
    12/24/14 23:10:34:765 | [INFO] |  | ASU | Setup |  |  |  | 5108 | The http request returned HTTP_Status:0 HttpCommunicator error:0
    12/24/14 23:10:34:765 | [INFO] |  | ASU | Setup |  |  |  | 5108 | Event with guid '86444b4c-74ef-4a0a-8f0b-ec1047ada721' is being sent
    12/24/14 23:10:34:765 | [INFO] |  | ASU | Setup |  |  |  | 5108 | GetIEProxyInfo - No default proxy present on the user machine
    12/24/14 23:10:34:765 | [INFO] |  | ASU | Setup |  |  |  | 5108 | GetIEProxyInfo - proxy Url is
    12/24/14 23:10:35:375 | [INFO] |  | ASU | Setup |  |  |  | 5500 | HTTP Request Status code 200.
    12/24/14 23:10:35:375 | [INFO] |  | ASU | Setup |  |  |  | 5108 | The http request returned HTTP_Status:0 HttpCommunicator error:0
    12/24/14 23:10:38:094 | [INFO] |  | ASU | PIM | PIM |  |  | 2280 | PIMSqlite closeDB status 0
    12/24/14 23:10:38:094 | [INFO] |  | ASU | PIM | PIM |  |  | 2280 | FREE PIM Instance ...
    12/24/14 23:10:38:125 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | cleanUSF: Deleting Path C:\Users\briai_000\AppData\Local\Adobe\OOBE\PDApp
    12/24/14 23:10:38:143 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | Setting current directory to C:\Users\briai_000\AppData\Local\Adobe\OOBE
    12/24/14 23:10:38:143 | [INFO] |  | ASU | Setup | Setup |  |  | 2280 | =================  End Adobe Setup. Exit code: 1  =================
    12/24/14 23:10:38:143 | [INFO] |  | ASU | Setup |  |  |  | 2280 | Waiting for the async thread to get the task completed
    12/24/14 23:10:38:158 | [INFO] |  | ASU | Setup |  |  |  | 5108 | Async thread is completed. Now exiting from function.
    12/24/14 23:15:49:406 | [INFO] |  | ASU | OPM | OPM |  |  | 5388 | Build Version - 8.0.1.12
    12/24/14 23:15:49:406 | [INFO] |  | ASU | OPM | OPM |  |  | 5388 | Logging Level verbosity Set  to 4
    12/24/14 23:15:50:576 | [WARN] |  | ASU | OPM | OPM |  |  | 5388 | Failed in key3List generation
    12/24/14 23:15:50:576 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 5388 | Failed in key3List generation
    12/24/14 23:15:50:983 | [INFO] |  | ASU | OPM | OPM |  |  | 5388 | _opm_handle_OPDReturnedStatus called with opdStatus as:0
    12/24/14 23:15:50:983 | [INFO] |  | ASU | OPM | OPM |  |  | 5388 | No Record found for the input fields in opm_getValueForKey
    12/24/14 23:15:50:998 | [INFO] |  | ASU | OPM | OPM |  |  | 5388 | Released OPM refrence successfully in opm_freeLibRef
    12/24/14 23:15:58:442 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Build Version - 2.8.1.451
    12/24/14 23:15:58:442 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Logging Level verbosity Set  to 4
    12/24/14 23:15:58:442 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Starting update workflow
    12/24/14 23:15:58:536 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | trying to createOrUpdatePIMDbSchema.
    12/24/14 23:15:59:067 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Current db schema version on machine 1.
    12/24/14 23:15:59:067 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Current db schema version to install 2.
    12/24/14 23:15:59:067 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | SUCCESS Created Tables.
    12/24/14 23:15:59:067 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | PIM Database is Up To Date.
    12/24/14 23:15:59:083 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | PIMSqlite closeDB status 0
    12/24/14 23:15:59:083 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | PIMSqlite closeDB status 0
    12/24/14 23:15:59:083 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | START: Application download
    12/24/14 23:16:10:988 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: IPC, size: 444.261719 KB, Time taken: 11 secs, Speed: 40.387428 kBps
    12/24/14 23:16:23:334 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: DWA, size: 2889.285156 KB, Time taken: 24 secs, Speed: 120.386879 kBps
    12/24/14 23:16:31:021 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: LWA, size: 5582.665039 KB, Time taken: 32 secs, Speed: 174.458282 kBps
    12/24/14 23:17:03:849 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: D6, size: 2501.843750 KB, Time taken: 64 secs, Speed: 39.091309 kBps
    12/24/14 23:17:13:099 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: P7, size: 8727.251953 KB, Time taken: 74 secs, Speed: 117.935837 kBps
    12/24/14 23:17:20:311 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: CCM, size: 5835.765625 KB, Time taken: 81 secs, Speed: 72.046486 kBps
    12/24/14 23:17:25:463 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: P6, size: 6825.774414 KB, Time taken: 86 secs, Speed: 79.369469 kBps
    12/24/14 23:17:29:029 | [INFO] |  | ASU | PIM | PIM |  |  | 4720 | Download complete for package: UWA, size: 6598.428711 KB, Time taken: 90 secs, Speed: 73.315872 kBps

  • Photoshop elements 11 installer failed to initialize

    I am attempting to install photoshop elements 11 on a macbook, and am getting an error message "Installer failed to initialize. Please download Adobe Support Advisor to detect the problem."
    I downloaded Adobe Support Advisor, and it reported only the following error (although it is repeated many times):
    Adobe Photoshop Elements 11 11.0 cpsid_90243r4: Error DW020 or DW050 occurs during installation - Creative Suite 5.5, Flash CS5.5, Flash Builder 4.5
    Click here for details and corrective actions related to this issue.
    System Information :
    Operating System = OS X 10.8.2 (12C2034)
    Locale = en
    I followed the link for "details and corrective actions" - the link is http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html - and it simply says "You can ignore this error and launch the products you were installing" but the product did not install.
    How can I fix this so that it will let me install the product?
    Thanks in advance

    It appears that the Adobe Support Advisor was unable to detect the error which caused your installation failure.  Please review your installation logs manually.  You can find details on how to locate and interpret the logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • "Dispatcher failed to initialize" macbook pro, snow leopard?

    I'm trying to install my sims 3 game on my laptop. i have a macbook pro with snow leopard software or whatever. (version 10.6.8). i already have it installed on my desktop computer but i'm moving soon and will not be taking my desktop with me. everytime i try to install it on my laptop it comes wup with "dispatcher failed to initialize." i know there were problems with the lion software, but i assumed snow leopard would be fine? help please??

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for