Copy Jobs Not Running with Firmware 4.1.102.29716

I have two ix4-300d NAS units and I use Copy Jobs to regularly transfer files oner the network. Since I upgraded both systems to the latest firmware, my Copy Jobs give error message "The Copy Job has unexpectedly stopped".
The firmware upgrade went smoothly and otherwise the units are functioning normally. I can access the remote ix4 manually but the Copy Jobs no longer run.

Tech Support had me revert to the earlier firmware, 4.0.8. Did that last night. Still getting copy job errors but they are "connection refused" rather than "copy job unexpectedly stopped". The problem is that, in reverting to the old firmware, the user information is messed up badly so the NAS is really not workable. (No data is lost if you remove the drives before updating the firmware.) I resinstalled back to v 4.1.102 and at least it's functional except for copy jobs. I have not heard back today from tech support today and I don't know if they are aware that others are having the same problem.
I may try switching from rsync to ftp for file transfer. This should work provided I can change the port from 21/22 as they are in use for other systems. It seems the rsync server has a problem in 4.1.102.

Similar Messages

Convert Spool to PDF and mail for the jobs not run in background.

Dear All,
I need to convert the spool job into pdf and mail as attachment for job not run in background.
I am printing the bills using the program SD70AV3A to print the bills in a batch using the SUBMIT.
But i am not using the spool options since its going to into waiting state in spool...and i need to change the printer properties to G
to get the printer to print the reports as these jobs run in backgroud....but this solution is not acceptable solution.
SUBMIT SD70AV3A
         WITH RG_KSCHL-LOW = 'ZRR'
         WITH RG_NACHA-LOW = '1'
         WITH PM_VERMO = '2'
         WITH PM_NSORT = '1'
         WITH RG_VBELN IN range.
*        TO SAP-SPOOL
*        SPOOL PARAMETERS print_parameters
*        WITHOUT SPOOL DYNPRO
*        VIA JOB name NUMBER number
*        AND RETURN.
so how do i get the spool number from the above after the job is submitted....and then convert into pdf and mail
please suggest some solution. I have searched on net but most the solutions are say to run the job as background job...
i have also looked into the program RSTXPDFT4 but it asks for the spool id ....how can i get spool id for the job that has been completed.
please suggest some solution.
Thanks
Bhargava.

Hi,
Spool to PDF : FM 'CONVERT_ABAPSOOLJOB_2_PDF'
Table TSP01 to get spool number
You ,may need to convert OTF to PDF: FM CONVERT_OTF
and the to binary : FM 'SMCS_XSTRING_TO_BINARY'
To send mail use class: cl_document _bcs.
Regards,
Maria João Rocha

Add does not run with sql server 2008

Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
Pradnya

Hi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Task does not run with transaction currency

Dear All,
When i am executing IU AR/AP elimination, I am getting error " Task does not run with transaction currency ("per TC" option reset) "
Message no. UCF5104
Diagnosis
The present task is configured so that no values are analyzed in transaction currency. However, the option "per transaction currency" is selected in the method definition. This only makes sense if you also want to analyze the values in transaction currency.
System response
The task is being executed without the option "per transaction currency".
Please advise me how to resolve the issue.
Regards,
Malani

Dear Dan,
I would like to know what will be the effect if we remove o-Per Currency option in Method.
I would like to know, in the document also in properties tab - in Key figures - Check box - Transaction Currency. If i select the warning message not coming. So kindly let me know what exactly check box -Transaction currency is used in Document type and whether it is interlinked with Method.
Thanks
Malani

My office professional will not run with windows 8.1

my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues. Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

Can not run with Lingos

can not run with Lingos!!!!

Sorry, but my mind-reading abilities are malfunctioning. What is it that cannot run with whatever? What happens when you try? Any error messages that are not state secrets?

Cron job not running - script uses rsync, ssh (with id_rsa)

Does anyone know how to get cron to run a rsync/ssh script which uses id_rsa for passwordless logins?
I have a backup script I have slaved for months over that works wonderfully when running it from the command line.
It uses rsync and connects with SSH (passwordless using ssh keys). I have setup id_rsa and id_rsa.pub for passwordless logins (this is my user account, and connects using root@ to the server)
As stated all works find when run from the command line. But when I setup a cron job to run this file (exact same line I run from the command line) it does not execute. Actually, it does run, as I have an email notifiction which sends to me. It is just the rsync/ssh part that does not run.
I have spent days and days trying to figure it out. No error messages occur, nothing. Took me a while to find out cron is emailing the user account on Lion the messages (not to a proper email address).
The error shows a permission denied, which I believe to be the cron user cannot use the id_rsa/ssh connection.
Cron is running the script as my user, the same I use on the command line. I even tried copying the id_rsa to the root user .ssh folder in case cron is running as root but that does not work either.
So does anyone know how to get cron to run this rsync/ssh script which used id_rsa for passwordless logins?
Thanks a lot

YES! Got it working, finally!
So the issue is indeed cron/launchd not being able to access the ssh-agent which holds the key.
So this is the solution...
Download keychain for Mac:
http://www.funtoo.org/wiki/Keychain
Then once its installed and configured, the script to run needs this added to the top:
eval `keychain --noask --eval id_rsa` || exit 1
Note I am using id_rsa whereas keychains instructions refer to id_dsa so I just changed it and it works OK.
When the script runs the first time it asks for the key password. Then it works from then on.
What I do not know yet is will I need to re-enter the password when I logoff/logon again. That will cause an issue as I auto restart the Mac every day which means if I am off for a few days backup will stop (can you see the madness in this issue!).

Cron jobs not running

Hi
I am using linux 5.x
uname -r
2.6.18-348.16.1.0.1.el5PAE
I have 2 crontab jobs set up as following .
cat backup_confluence.sh
#!/bin/bash
# bash shell script to backup confluence backups to bccpfr
# Schedule this script after the backups are performed that day
# Setup the environment for the bourne-again shell
. ./.bash_profile
# Copy the daily backups for confluence
find /usr/share/confluence/data/backups -mtime -1 \! -type d -exec ls {} \; -exec scp {} bccpfr:/usr/backup/confluence \;
second
cat backup_jira.sh
#!/bin/bash
# bash shell script to backup jira backups to bccpfr
# Schedule this script after the backups are performed that day
# Setup the environment for the bourne-again shell
. ./.bash_profile
# Copy the daily backups for jira
find /usr/share/jira/backups -mtime -1 \! -type d -exec ls {} \; -exec scp {} bccpfr:/usr/backup/jira \;
cron as following
$ crontab -l
13 06 * * * /home/lsg/backup_jira.sh
18 06 * * * /home/lsg/backup_confluence.sh
Issue
Both the above .sh are running properly when executed manually but they are not running automatically at the given time crontab job.
Kindly help me on this issue.
many thanks
J

Is your crontask not running at all or is the scheduled task failing?
Hey Tommy I sent you some replies yesterday; don't know what happened to them. Yes I can see that crond runs every ten minutes. Also when I created the crontab file using the command you sent here I could see that it was running every minute by looking at root mail in /var/log.
Do you have execute permission set on the scripts?
Yes
Any info in /var/log/messages or e-mail?
Output from mail-
From root@razorback Tue Feb 11 08:19:01 2014
Return-Path: <root@razorback>
Received: from razorback (localhost [127.0.0.1])
    by razorback (8.13.8/8.13.8) with ESMTP id s1BEJ154018231
    for <root@razorback>; Tue, 11 Feb 2014 08:19:01 -0600
Received: (from root@localhost)
    by razorback (8.13.8/8.13.8/Submit) id s1BEJ1rh018198;
    Tue, 11 Feb 2014 08:19:01 -0600
Date: Tue, 11 Feb 2014 08:19:01 -0600
Message-Id: <201402111419.s1BEJ1rh018198@razorback>
From: root@razorback (Cron Daemon)
To: root@razorback
Subject: Cron <root@razorback> $(date) >> /tmp/cronout
Content-Type: text/plain; charset=UTF-8
Auto-Submitted: auto-generated
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
X-Cron-Env: <USER=root>
/bin/sh: Tue: command not found
From root@razorback Tue Feb 11 08:20:02 2014
Return-Path: <root@razorback>
Received: from razorback (localhost [127.0.0.1])
    by razorback (8.13.8/8.13.8) with ESMTP id s1BEK2BD018267
    for <root@razorback>; Tue, 11 Feb 2014 08:20:02 -0600
Received: (from root@localhost)
    by razorback (8.13.8/8.13.8/Submit) id s1BEK1mT018238;
    Tue, 11 Feb 2014 08:20:01 -0600
Date: Tue, 11 Feb 2014 08:20:01 -0600
Message-Id: <201402111420.s1BEK1mT018238@razorback>
From: root@razorback (Cron Daemon)
To: root@razorback
Subject: Cron <root@razorback> $(date) >> /tmp/cronout
Content-Type: text/plain; charset=UTF-8
Auto-Submitted: auto-generated
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
X-Cron-Env: <USER=root>
/bin/sh: Tue: command not found

Px4-300d copy job setup problem. Firmware version 4.1.108.32627

Hello.
I have a wierd problem with copy job setup on my px4-300d (4.1.108.32627) . I was able to set up one job, where I take a folder from my NAS and put it to a remote machine. That job ran fine.
When I go to setup a similar job but for a different folder, I have two possible outcomes:
1. When I go to chose the remote folder I see it fine and the job is setup fine as well. However when I run the job it throws an error. And in the log I see that instead of going to the folder I setup like "\\remoteserver\backupfolder" it's going to "\\remoteserver\u_myremoteserverusername\backupfolder" , which is obviously not there.
2. I can see my remote server, but I don't see my shares on it. I don't get no "Access denied" error or anything - I simply don't see any shares on that particular server. I do see shares on other servers, which use the same credentials. In addition the job that I was able to set up previously stops working.
Then when I reboot, the first job (the one setup successfully) may or may not properly run, yet I still cannot set up the second job.
I did check permissions and all the stuff that you would regularly check (connectivity, ports etc). Seems to me the script that is being generated from the UI is a bit too smart and is in fact outsmarting the NAs itself.
I also suspect that the fact that I could set up the first job and not the second is that the second job goes to a subfolder of a shared folder. Or that the shared folder's name starts with an underscore "_" . But these are just my guesses - I cannot verify this yet.
Any ideas how to fix this or how to bypass the problem?
Thanks.

Hello fimine
I recommend double checking that the remote server's folders that are not being seen by the px4 are infact shared from that remote machine. If they are not, copy jobs will have problems accessing the folders.
I also recommend trying to use the remote machine's ip address for now to see if there is any change in behavior.
If the issue does not happen when using the ip address, it my be an issue with how your network's DNS is setup.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Oracle Job not running properly

Hi All,
I am facing an issue with oracle jobs.
I have writtent the script of a job scheduled to be executed automatically after 2 seconds.It works on a table and dequeue the data in that table.
Now the job is not able to execute for next time.If i execute the job immediately then also it does not run for next time.
so where could be the problem...
Please give me pointers.
Thanks in advance :)
Thanks n Regards
Arun

user10280915 wrote:
Hi All,
I am facing an issue with oracle jobs.
I have writtent the script of a job scheduled to be executed automatically after 2 seconds.It works on a table and dequeue the data in that table.
Now the job is not able to execute for next time.If i execute the job immediately then also it does not run for next time.
so where could be the problem...
Please give me pointers.
Thanks in advance :)
Thanks n Regards
ArunThings that you'll need.
1. JOB_QUEUE_PROCESSES to be non-zero
2. A commit after submitting the job
3. The job not to be broken.
4. don't schedule very frequently (say <5s) if the os is Linux :( ).
I'd check in the above order.
Niall

DPM 2012 R2 Upgrade - Scheduled jobs not running

Hi,
We're having an issue after upgrading to DPM 2012 R2 where the scheduled jobs are not running.
We're running Server 2012 R2 with SQL Server 2008 R2 SP2.
Looking at SQL jobs, if we run the job step we get an error.
Message
[136] Job 18822c3e-8fe 7-47a2-bb6e-0feccecc2952 reported: The process could not be created for step 1 of job 0xA746B176EAD99943A14A57DAF684829F (reason: %1 is not a valid Win32 application)
However, if we place quotes around the triggerjob.exe path in the SQL default job step:
"C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\bin\TriggerJob.exe" 9b30d213-b836-4b9e-97c2-db03c3eb39d7 18822c3e-8fe7-47a2-bb6e-0feccecc2952 server.domainname.com
It is successful.
We've already uninstalled DPM 2012 R2 and re-installed, restored the database and run dpmsync -sync with the same result. We've checked the DCOM Config Launch and Activation Permissions for Microsoft System Center 2012 R2 Data Protection Manager Service
and has full access.
Has anyone else had this issue and been able to resolve it?
Any help would be greatly appreciated.

Hi,
The below blog may assist with troubleshooting your issue.
http://blogs.technet.com/b/dpm/archive/2014/10/08/how-to-troubleshoot-scheduled-backup-job-failures-in-dpm-2012.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

Job not running in 11.1.0.6.0 but running in 9.2.0.6.0

I have job which is running in oracle 9.2.0.6.0 but not running in 11.1.0.6.0
Job is that i have submitted is
declare
l_job number;
begin
dbms_job.submit( l_job,
'BEGIN DBMS_STATS.GATHER_TABLE_STATS(OWNNAME => ''UV_DICOM'', TABNAME => ''STUDY'',ESTIMATE_PERCENT => 100, METHOD_OPT => ''for all columns size skewonly for columns (STATUS)'',CASCADE => TRUE, DEGREE => 4); END;',
SYSDATE,
'SYSDATE+1');
end;
I didn't under stand why?

Kanchana Devasurendra wrote:
Check you aq_tm_processes parameter. if the value is set to zero then set it to 1. Then try it againEeeh?
From docs
http://download.oracle.com/docs/cd/B28359_01/server.111/b28320/initparams008.htm
AQ_TM_PROCESSES controls time monitoring on queue messages and controls processing of messages with delay and expiration properties specified.
You do not need to specify a value for this parameter because Oracle Database automatically determines the number of processes and autotunes them, as necessary.
Therefore, Oracle highly recommends that you leave the AQ_TM_PROCESSES parameter unspecified and let the system autotune.
Regards
Peter

Jobs not running anymore since midnight

All my jobs that run minutely, half minutely, 10 minutely, hourly are all last run tonight before midnight.
Next run date was set to the correct time after midnight but they did not start.
Its a rac database under 64bit windows, 10.2.0.3.
Its acutally two databases and on one stopping and starting instances one by one helped.
On the other one the jobs (at least did run, or at least the next run data got updated) by the starting and stopping instances, but they still do not run at there regular intervals.
Currently i am trying with one job, disabling, enabling, changing the schedule, it runs occassionaly but not ever half minute as it should.
I did all the checks, no jobs running, there are not too many sessions, the job_queue parameters are correct....
There is nothing in the alert log, only thing i can find is:
jsksGetCurWindowId:1 got error 27468
in the cjq0 logfile.
Any further ideas or sugestions ?

Do you use Oracle Scheduler (DBMS_SCHEDULER)?
If yes...
select * from DBA_SCHEDULER_GLOBAL_ATTRIBUTE where attribute_name='CURRENT_OPEN_WINDOW';
What do you find "Window group"?
If you find and then close it...
Example:
SQL> select * from DBA_SCHEDULER_GLOBAL_ATTRIBUTE where attribute_name='CURRENT_OPEN_WINDOW';
ATTRIBUTE_NAME VALUE
CURRENT_OPEN_WINDOW WEEKNIGHT_WINDOW
SQL> exec DBMS_SCHEDULER.close_window ('WEEKNIGHT_WINDOW');
If you use dbms_job, then try
SQL> show parameter job_queue_processes
NAME TYPE VALUE
job_queue_processes integer 50
SQL> alter system set job_queue_processes=0;
SQL> alter system set job_queue_processes=50;
surachart
http://surachart.blogspot.com

Schedule jobs not running

the user execute the abap job and execute in background, but it is not running. He execute many times, but still sit in schedule state, do you know why? there is no error in SM21, will it be authority issues? how to check? thanks

It looks like it is an authorization issue. Ask them to do that again and immediately in another session, run SU54. This will show all the authorization checks that the user went through and tells you if it failed.
Alternatively, they can just go to SM37 and try to release it. If it comes back with a message, you will know.
Srinivas

Copy Jobs Not Running with Firmware 4.1.102.29716

Similar Messages

Maybe you are looking for