Copy jpeg file to CF card to be read by 7D.

How do I copy any jpeg file back to a CF card such that it can be read by my 7D.

You need to export the file using zoombowser or imagebrowser - it's just about the only way.
Canon USA uses the same approach to put their digital learning centre videos on the cameras.
http://www.learn.usa.canon.com/galleries/galleries/tutorials/eos_7d_tutorials.shtml
There's a PDF guide explaining how to do videos here http://downloads.canon.com/CDLC/EOS7D_on-camera_instructions.pdf same applies for stills I recall.
Brian / p4pictures
Canon specialist trainer, author and photographer - http://www.p4pictures.com

Similar Messages

HOW do I copy jpeg files from my Windows PC to my iPad2?

How do I copy jpeg files from my Windows PC, to my iPad2?

If you are on iTunes 11 on your PC then you may want to enable the left-hand sidebar via View > Show Sidebar (or control-S), which might make it easier to navigate.
To sync photos, connect and select your iPad on the left-hand sidebar of your computer's iTunes, and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad's Photos app. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.

HT4101 downloading only JPEG files using SD card reader

I am new to Apple-iPad world,, mostly working on WinXP.
I am looking to buy a tablet to view photos while I'm on vacation and traveling. I shoot both RAW and JPEG files of each image. When I connect my SD card to an iPad Mini, I'd like to be able to download only the JPEG files, since the RAW files are too large and would quickly fill up my device.
I've been told that when you plug in the Apple SD card reader, it treats the RAW and JPEG files of an image as one, so when you download you have no choice to just select the JPEGs. Seems like a huge oversight on Apple's part, to offer camera and card connection, but then be so controlling about it, that it doesn't work for people. None of the 3-4 Apple sales reps I've spoken to know of a way around this.
At this point, I'm lookng at an Android tablet instead, since it doesn't have this limiting feature--though I much prefer the look and size of the iPad Mini screen. .
Has anyone else run into this issue? Any thoughts on a work-around?
(Two solutions that I've thought of--though I don't know if they will work--are: 1) download all of the images, then bring them up in a program like Snapseed, where I can save (really a 'save as') a new JPEG version of my image, then delete the original files that I downloaded, or 2) see if I can download a file manager app that would let me view the different files by size and by type (to identify the RAW files), then delete just these from me iPad)
Best, David.

Thanks Tom, at last an answer!
So it seems I would need to first download the image files to my tablet--including RAW files--(or whatever the constraits are in working with the Apple SD card reader), and then after the fact, use PMP to delete just the RAW files.
I assume then that PMP can view the 'standard' photo folders (called 'Albums on my iPod) created by the Apple photo app (or by the iOS, I'm not sure), is that correct?
This might be an acceptable work-around for me.
Best, David.

E66 Hang After Copy Message File To Memory Card

Hi everyone,
I having a problem here. Previously i'm using Nokia 6630 and i trying to copy the "mail" folder in 6630 memory card, to E66 "Mail2" folder. After copy all the file, and i switch to use memory card in messaging, and i work find. But after i off my phone and on the phone back, after the nokia logo screen, and the phone hang there. I try to press Power Button also no respone, and i have to remove the battery then only the phone will off. What had happen here???? Any solution for this??? Thanks.

You would need to look at the Keyence vision system API to see if such an operation is possible.

What trick to get SD card reader to read jpeg files from SDHC card

I need to be able to read jpg files directly from SD HC cards into the iPad. This is not working. I have tried bunches of things. The card clearly contains 164 files. The iPad just cant see them... What things can I try to make the card visible to the O/S?

OK, I found the actual problem. SDHC cards do work. The problem is the file naming convention. MAC requires the old DOS 8.3 format. in other words the file name MUST BE XXXXXXXX.jpg (eight characters or less, no special characters. just letters and numbers) followed by a period, followed by a 3 letter file descriptor. Those file names work fine. without the whole ball of wax, NO GO.

Somehow all my JPEG files want to open in Adobe Reader. How do I change this setting so they open

How do I reset my picture files (JPEG) so they open as pictures and not in Adobe Reader?

Mac or Win? OS version?

Drag and Drop - Incomplete Wireless Copying of Files

Ever since I upgraded to 10.6.4, I have a problem doing the "drag and drop" method of copying files wirelessly from my Mac to the HP MediaSmart server connected to my Apple AirPort N Base station.
I used to be able to simply copy files without problems from my FireWire CF card reader to the server fast and with no problems. After the upgrade, the wireless copying has become slow and the transfer is incomplete. For example today I tried to drag and drop 97 photo files and it only copied 30 of those files in random order. So I repeat the process over and over again (without replacing the already copied files) until all 97 files are copied. If I re-copy everything from scratch by over-writing existing copied files, it will only successfully copy a few files again.
If I copy direct from the card reader to the hard drive in my computer, the copying is lightning fast and with no problem.
If I copy from the computer hard drive to the server connected to the AirPort, the same inconsistent copying occurs.
So it's somewhere in the wireless link that has a problem.
The solution is to use the "Image Capture" app so that it will successfully copy all files from the card reader to the server. But as I mentioned the process is slow.
I have installed the latest Apple updates at the time they come out. I am at 10.6.5 and have the latest AirPort update that was recently released. I still have the same problem.
Anyone know about this problem? How do I report issues like this directly to Apple?
Thanks for any assistance and feedback.

I am having the same problem. I just bought a USB Hard-drive and was copying a 2.7 M folder from one HD to the USB and it leaves out like 15 files. I tried copying to the desktop and it does the same thing. I can open the folder, cmd-A, cmd-c, then paste and it took all the files. Very strange.

'Read JPEG File.vi' does not seem to work on PXI with real-time OS

I am trying to read a jpeg file on a PXI system with LabVIEW real-time on it. To test I created a very simple VI (attached) with only 4 objects: 'Path' --> 'Read JPEG File.vi' --> 'Draw Flattened Pixmap.vi' --> 'Picture'.
This VI works fine on my Windows XP host machine, but it does not work on the PXI system. The error code 1 occurs in 'Read JPEG File.vi'.
The jpeg picture is in the same directory as the VI. I don't think I got the path or filename wrong because if I change the file or path name I get another error: 7: 'File/Directory Info in Check Path.vi->Read JPEG File.vi->test.vi'.
Maybe reading jpeg files is not supported on realtime systems? I could not find anything about it. Sol
utions or workarounds are of course welcome!
Attachments:
Test_Read_JPEG.vi ‏23 KB

'Read JPEG File.vi' is not supported on LabVIEW RT. I believe it has to do with special functions or libraries need to be called due to the JPEG image type. Instead you can use a Bitmap and the 'Read BMP File.vi', which I believe is completely implemented in G code.
Keep in mind that the RT System doesn't really have a front panel and that the front panel is only 'available' when LabVIEW is connected to the target such as being targeted or having a remote panel to it. Generally, a deployed RT system doesn't have a UI and just communicates to a Host VI which acts as the UI. Having said that, the BMP file worked when I tested.
Regards,
JR A.

Copying audio files to SD memory card

I have a 1GB Secure Digital card connected with a card reader. I converted an audio book CD to mp3 files using iPhoto. When I try to copy the mp3 files to the empty SD card, after 75 files and 342 MB, this message appears: "The item cannot be copied because there is not enough free space."
I can fill this card to capacity with JPEG files.

I also have this same problem on multiple SD cards and readers, although there is no such problem when I transfer the files on to the same cards with a Windows PC! I've also noticed that my Powerbook G4 puts an additional file for each audio track that uses no data, but just lists the file name again. It would be GREAT if someone could figure this out!!! Thanks!
Powerbook G4 Mac OS X (10.4.8)

When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images.

When copying raw files from Extreme IV card to hardrive, finder copies a few files then exits task and wipes the card clean of all images. Have tried new card and card-reader to no avail. Have done this many times on other macs with no problems.
Can edit files off the card, in CameraRaw, prior to 'copying' them, ie can 'save as' to the hard drive, so files seem okay on card, before I try to copy them using copy and paste.
Running OS 10.8.3 on a new macbook pro.

Rita,
The process for determining what is causing the files to be corrupt can be a tedious one depending on the following:
1. Can you review the images on your camera's LCD screen without problems? If not then the problem is most probably either a corrupted/faulty memory card or a faulty camera. If this is the case then your best bet at recovery (of sorts) is to use a program such as BrezzeBrowser from BreezeSys to extract the embedded jpeg versions of the corrupted RAW files from within each RAW file. Chances are, you won't manage to actually repair the corrupted RAW file but the jpegs are better than nothing.
2. If the images review ok on your camera but are corrupted when viewing on your computer and there seems to be no other problem with other files on your computer then it may be either a faulty card reader or usb/firewire cable between the card reader and the computer that is the culprit. Try the card reader with a different cable and also try a different card reader to determine the cause of the corruption.
3. If your symptoms are that you get different files corrupting over time when viewing them on your computer then the problem may be any one of either failing RAM memory, hard disk, hard disk controller or IDE/SATA hard disk cables. This is where the troubleshooting can be pretty tedious testing then eliminating each item from the list of suspicious pieces of hardware. Try the card and card reader on an altogether different computer to see if the files transfer correctly to that computer. If so then the problem lies with your computer hardware. If you haven't already done so at this stage, backup all your important data immediately (hopefully you keep backs anyway).
Hope this helps.

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone? I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them. Do I need to copy an entire album or can I just pick & choose individual songs? The phone is question is an LG running who knows what for an operating system.

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?

I have a MacBook Pro, I want to copy Itunes files to an SD card to play in my car, the SD Card doesn't appear in Itunes when I insert it, and I don't know how to convert the files to the correct format, can anyone help?
Thank you

So it seems from reading the COMMAND manual that my first issue is that I used a 16GB SD card, and the manual says it will only recogize up to a 2GB SD card. I did use my MB Air's SD card slot and crated a folder and dragged the music files to it, then to the card. So I am going to get a 2GB card and try that next. Otherwise just stick with the iPOD connected. At least that is 8GB

Error message when I try to copy new files (images, documents) to mac from flash drive/SD card

I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder... How can I fix this?
Please help me!

You don't need to recover the system.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
dot_clean -m
Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.

Copying files to SD card using USB card reader

Everytime I try to copy mp3 files to an SD card using a USB card reader my notebook hangs after just a few MB have been transferred. what should i do?

I myself have seen this happen right in front of me with a customer. Sometimes you have to me a little more selective with your card readers because not all of them work right out of the box.
I have found the Zio corporation readers to work splended with Mac OS X you can find them at Compusa I haven't really seen them any other place. But IMHO the issue is with your reader and not your memory.
As for the part number on the reader from compusa it is as follows that is if you are willing to give it a try....
Thunderbolt SD / MMC / MS Reader / Writer
Manufacturer: Zio Corporation
Mfg Part #: CM28100
Product Number: 332371

I can't import photos from a card, file or anything. I get "could not copy a file to the requested location".. This has never happened before.

I can't import photos from a card, file or anything. I get "could not copy a file to the requested location". I have never had this happen before. I use a MacBook Pro

I also have the exact same issue. New IMac, installed LR, imported approximately 900 photos no problem, across the network from a Windows PC. The import stopped when the network connection was lost. Now I cannot import for the same reason "could not copy a file to the requested location". I have plenty of disk space and i have permission to the needed folders. I cannot even import from a folder already on the IMac.

Copy jpeg file to CF card to be read by 7D.

Similar Messages

Maybe you are looking for