"Copy" just blinks and disappears

Hi.  I'm new to Adobe Digital Editions, so please forgive me if this has been asked and answered before.
Today I downloaded and installed Version 1.72.1131.  I then visited the sample ebook library and downloaded some public domain books, one of which was Alice in Wonderland.  The file that was downloaded is named "aliceDynamic.epub".
Digital Editions opens this file just fine.  According to the Iten Info, the rights set by the publisher allow Viewing, Copying and Printing on any device.
I have not tried printing it, but I did try "Copy".  And when I do, the box just blinks and disappears.  I've been unable to figure out a way to make a copy.
Can anyone help?  Thank you.

I am not aware that a Group has any Specific size limit.
At one time AIM limited the size of the whole Buddy List to 200 Buddies.
This was moved at least once to 250 Buddies and may actually be more than that (I have not bumped in to it for a while but only have 174 Buddies at present).
There are reports of people finding they:
1) Can not see Buddies On-line they know are.
2) Can not add new Buddies.
3) Can not see the Buddy List with any Buddies in it.
4) Can get the Buddy list to appear and have no access to the Preferences.
These similar problems seem to follow being kicked off AIM login and iChat trying multiple times until a Error message about too many attempts pops up.What then seems to happen is an incomplete Login at a later stage resulting in the above symptoms.
There seem to be different levels of "cure" that work for different people depending which symptom they have.
1 through 3 seem to be sorted with deleting com.apple.ichat.AIM.plist
Sometimes at 3 com.apple.iChatAgent.plist also has to be deleted.
Both these files are in Users/(your account)/Library/Preferences.
iChat needs restarting after each deletion.
4) is a bit more involved as Quitting iChat does not Quit iChatAgent that runs in the Background. For this you have to use Activity Monitor (In Applications/Utilities and use the Quit button on iChatAgent and confirm a Force Quit then delete the two files above.
I did ask about the address Book as you can not add a Buddy to iChat with adding a real name if that name is already in the Address Book.
In iChat 3 and earlier you used to get a clear "Feedbag" error message but this does not seem to happen in iChat 4.
Feedbag error were also reported on a full Buddy list although the numbers were different for each.
This was why I asked the two questions.
See bottom of Page http://www.ralphjohns.co.uk/page13.html
8:19 PM Monday; February 25, 2008

Similar Messages

  • Preloader Blinks and Disappears?

    Hi,
    I have a preloader image that I've included in the Publish settings area.  After publishing the project, the preloader image briefly blinks, disappears, and then displays the default gray color with a play button instead of the preloader image. 
    Does anyone know why and how I can fix this?
    Draft copy is here to view.
    Thanks,
    Jim
    PS:  I'm using Captivate 6 on a Windows 7  machine.

    public void init()
                    mainNorth = new JPanel();
              add(mainNorth, BorderLayout.NORTH);
              mainNorth.setBackground(Color.orange);
              mainNorth.add(title1);
              mainSouth = new JPanel();
              add(mainSouth, BorderLayout.SOUTH);
              copyright = new JLabel("? 2008 Frenzy Fours");
              copyright.setFont(new Font("Verdana", Font.PLAIN, 9));
              mainSouth.add(copyright, BorderLayout.SOUTH);
              mainSouth.setBackground(Color.orange);
              mainCenter = new JPanel();
              add(mainCenter, BorderLayout.CENTER);
              mainCenter.setBackground(Color.orange);
              mainEast = new JPanel();
              add(mainEast, BorderLayout.EAST);
              mainEast.setBackground(Color.orange);
    public void paint(Graphics g)
              g.setColor(Color.blue);
              g.fillOval(300,200,100,10);
         }The blue oval blinks and disappears when the applet is run. I don't know why. I've fiddled with the paintComponent() but no luck...

  • In my iphone 5s music palyer is not opening its just blink and comes to the home screen.

    in my iphone 5s music palyer is not opening its just blink and comes to the home screen.

    What?

  • How come when I try to open an app on my phone does the screen just blink and the app not open?

    How come when I try to open an app on my phone does the screen just blink and the app not open?

    Some apps crash. If they do, try this, in order.
    1. Double click your home button and put your finger on any app and hold for a second. Then delete that app. You're not deleting the app from your phone, so don't worry. Then try opening the app again.
    2. If that doesn't work, hold your sleep+home buttons for 10 seconds and don't let go. Ignore the power off message. Then try again.
    3. If that doesn't work, delete the app and re-download it. (This will work most of the time)
    4. If that doesn't work, download the app on iTunes on your computer and sync it from there.
    5. If that doesn't work, wait for an update by the developers.

  • After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    Go to the App Stor and download an app- any free app will do, it doesn't matter.
    Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
    And no, you don't have to keep that free one you just downloaded.  You can delete it if you don't want it.

  • PDF files would just opened and disappeared

    Our internet provider is Bell and their security system is now with McAfee. This morning I got a message from McAfee that a new Adobe Reader update should be installed. I did but now I could not read any PDF file. The PDF files would just opened and disappeared. I tried different configuration but still could not open PDF files. Please help.

    Hi Pat,
    Thank you very much for responding to my problem. 
    Our operating system is Windows 7 (64).  Adobe Reader was working fine until we got a suggestion from McAfee to upgrade it to version XI.   After the upgrade, whenever we open our PDF file, the file just opened blank for about 3 seconds and disappeared (closed by itself).  The PDF files were not deleted from the system, just unable to read as Abode Reader just closed itself. 
    We tried many options, such as:
    1.      Many restarts
    2.      Uninstalled and Reinstalled (as Administrator)
    3.      Reinstalled previous version (Adobe Reader X)
    4.      Disable McAfee
    5.      Etc.
    After all these tries and repeated a few times, still could not be able to read any PDF file (those were perfectly fine before yesterday upgrade to version XI).
    Thanks, Hung.

  • After installing planning my essbase server just blinks and goes off

    Dear All,
    Till yesterday,everything was working fine.
    After installing planning my essbase server just blinks and goes off.
    I am using win xp ,system9.3.1.
    ARBORPATH: D:\Hyperion\AnalyticServices;D:\Hyperion/common/EssbaseRTC/9.3.1
    HYPERION_HOME: D:\Hyperion
    PATH:D:\Hyperion\AnalyticServices\bin;%HYPERION_HOME%\common\ODBC\Merant\5.2\Drivers;D:\Hyperion\AnalyticIntegrationServices\bin;D:\Hyperion/common/EssbaseRTC/9.3.1/bin;D:\Hyperion\common\CLS\9.3.1\bin\windows
    PLANNING_HOME: D:\Hyperion\Planning.
    Thanks,
    Vikash

    Hi John,
    Thank you very much for the reply.
    I am able to use the essbase once again.What i did that i removed D:\Hyperion/common/EssbaseRTC/9.3.1 from the ARBORPATH.
    ARBORPATH: D:\Hyperion\AnalyticServices;D:\Hyperion/common/EssbaseRTC/9.3.1
    But i do not know if it is the right thing to do.Please suggest.
    Thanks,
    Vikash

  • My appletv the light is just blinking and the imga says that I have to connect a cable tio itunes, what can I do?

    My appletv the light is just blinking and the image says that I have to connect a cable to itunes, what can I do?

    Welcome to the Apple community.
    I'd be inclined to do exactly what it's telling you to do.
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • I just installed iPhone 11 and when I try to play a slide show, it just blinks and and shows the whole group of pictures at once. I have done many slideshows with older versions of iPhoto. How can I fix this?

    I just installed iPhoto from the iLife 11 and when I try to play a slide show, it just blinks and shows a whole bunch of pictures at once. I have done many slide shows with no problem in an earlier version of iPhoto. What can I do to fix this?

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

  • Why my Character Pallet in Utilities always blink and disappear?

    Why my Character Pallet in Utilities always blink and disappear? I cannot add special characters. It's very annoying. Could anyone help? Thanks in advance.

    Try turning on all desired toolbars under View/Toolbars. I noticed in FM12 that the palettes are displayed depending on the function you're using (e.g., Manage Graphics, Authoring, etc.) - top right of the screen. I have all my editing toolbars turned on, then leave the mode to Manage Graphics. Everything stays and I don't have to continually re-open. Hope that helps.

  • FillOval blinks and disappears when I compile and run JApplet

    public void paint(Graphics graf)
              graf.setColor(Color.blue);
              graf.fillOval(300,200,50,50);
         }When I run the JApplet the oval blinks and disappears. I have tried repaint but this makes the whole container white and the oval can be seen then. I have used JPanels on BorderLayout NORTH, SOUTH and WEST all with an orange background colour. It's as though the oval goes behind the content pane.
    Edited by: Aurora88 on Feb 3, 2008 3:50 PM

    public void init()
                    mainNorth = new JPanel();
              add(mainNorth, BorderLayout.NORTH);
              mainNorth.setBackground(Color.orange);
              mainNorth.add(title1);
              mainSouth = new JPanel();
              add(mainSouth, BorderLayout.SOUTH);
              copyright = new JLabel("? 2008 Frenzy Fours");
              copyright.setFont(new Font("Verdana", Font.PLAIN, 9));
              mainSouth.add(copyright, BorderLayout.SOUTH);
              mainSouth.setBackground(Color.orange);
              mainCenter = new JPanel();
              add(mainCenter, BorderLayout.CENTER);
              mainCenter.setBackground(Color.orange);
              mainEast = new JPanel();
              add(mainEast, BorderLayout.EAST);
              mainEast.setBackground(Color.orange);
    public void paint(Graphics g)
              g.setColor(Color.blue);
              g.fillOval(300,200,100,10);
         }The blue oval blinks and disappears when the applet is run. I don't know why. I've fiddled with the paintComponent() but no luck...

  • I inserted a CD and itunes will not let me click on the CD to burn the songs. It just blinks and then disappears

    .

    unrecognized format or dirty disk.  Try opening the CD in VLC or another media player, make sure the format will open for normal play.   Report back.

  • About a month ago, most of the Album art on my iPod just up and disappeared.

    So, about a month ago, for no apparent reason at all, almost all of the album art on all of the music on my iPod just disappeared and was replaced by the default white art. It even happened to most of my purchased music! As time passed, some of it gradually re-appeared, which is really weird, but most of it is still gone. I have 174 albums on my ipod and about only 1/4 of them have art. Before this problem happened, almost every single album had art. I meticulously spend HOURS adding really nice album art to the music on my iPod, and then this happens.
    I'm genuinely quite upset. I use my iPod a LOT and have put a lot of money into Apple. A problem like this should not be happening. I'm actually very tech-savvy (going to be getting a CS degree) but this problem baffles me at every turn and it's extremely frustrating.
    So, last night, I tried to fix the problem again. I made an album in my music folder and added the proper information to each song, with an album cover (500X500 - all of my album art is 500X500) in the folder where the songs reside. I then plug my iPod in and open iTunes. I then go into file and add the album to my iTunes library, and then I go to the songs and add the album cover to their information via the "add artwork" submenu of the get info on the songs. I then sync the songs to my iPod normally, and the album art shows up on them. Great. Wonderful.
    I then think, "Oh, maybe I can fix all of my OTHER album art manually!".
    So I go to my artists on my iPod and find an album titled Asteroid (it's a song by Rameses B) which doesn't have a cover but should. I deleted it off of my iPod. I then plugged my iPod back into my computer and tried to re-sync the song Asteroid back onto my iPod but nothing happened. It WOULD NOT, and I mean WOULD NOT sync that **** song to my iPod. It just sat there like I never did anything at all. My method of syncing is that I find the song and drag-drop it to the iPod menu on the right side of my screen.
    So then I kind of gave up for the night. It was midnight and I was done with this **** after trying to get that song to sync for at least 20 minutes.
    So I eject the iPod from my computer (SAFELY) and close iTunes normally, bla bla bla, go to sleep.
    I get up this morning and go to my music app and ALL OF MY ALBUM ART ON EVERYTHING IS GONE. *POOF*, gone. Including the songs that I'd synced last night! What the ****! How does that even happen?!
    Some more information:
    I'm running Windows 7 with a fully updated iTunes. My iPod is fully updated as well. As in iOS 7.1.0, non-Beta. It's an iPod touch 5th generation.
    So, my question is, how the heck do I get my album art back on my darn iPod?! I have tried manually re-syncing individual songs after deleting them off of my iPod and they won't re-sync. I have also tried re-syncing my entire music library to my iPod, and the result was the same as before. Most of the album art didn't transfer to the iPod.
    I'm extremely frustrated at this point. I'm at the very verge of jailbreaking this thing and iFunbox-ing all of my album art over to it forcefully. If Apple can't fix my problem, I will. I'm at that point right now.
    Please help.
    Thank you so much in advance.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Light dm doesn't start (screen just blinks) and no tty switch

    Hello.after I installed arch Linux, i installed xorg-server. then i  installed nvidia and nvidia-utils as a driver for my nvidia geforce 210(not rebooted pc after that). then installed lightdm and lightdm-gtk3-greeter by following commands:
    pacman -S lightdm
    pacman -S lightdm-gtk3-greeter
    and followed this guide and executed this command: systemctl enable lightdm
    and after that installed jwm(not executed any command. just installed package with pacman)
    and reboot.
    after reboot and those [ok] ..... (the last one was something like "[ok] starting light display manager" ), the screen starts blinking(pixel turns in blue color which is close to black and i can barely see it and all of them turn black similar to time when monitor turned off)
    one thing which is really strange is that i cant switch between tty(seems like crtl +alt + Fn doesn't do anything,maybe it changes tty and blinking is related to driver?)
    my arch installation is x86_64
    partition table format is gpt
    and boot is uefi
    my questions
    1-is this related to lightdm or nvidia driver or something else?
    2- did i missed any steps?
    3-and if i messed something,aid me to fix those mistakes and solving this problem

    light dm log:
    [+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
    [+0.00s] DEBUG: Starting Light Display Manager 1.10.1, UID=0 PID=473
    [+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
    [+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
    [+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
    [+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
    [+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
    [+0.00s] DEBUG: Registered seat module xlocal
    [+0.00s] DEBUG: Registered seat module xremote
    [+0.00s] DEBUG: Registered seat module unity
    [+0.00s] DEBUG: Registered seat module surfaceflinger
    [+0.00s] DEBUG: Adding default seat
    [+0.00s] DEBUG: Seat: Starting
    [+0.00s] DEBUG: Seat: Creating greeter session
    [+0.00s] DEBUG: Seat: Creating display server of type x
    [+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
    [+0.00s] DEBUG: Using VT 1
    [+0.00s] DEBUG: Seat: Starting local X display on VT 1
    [+0.00s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
    [+0.00s] DEBUG: DisplayServer x-0: Writing X server authority to /run/lightdm/root/:0
    [+0.00s] DEBUG: DisplayServer x-0: Launching X Server
    [+0.00s] DEBUG: Launching process 478: /usr/sbin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
    [+0.00s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
    [+0.00s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
    [+0.00s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
    [+0.00s] WARNING: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
    [+0.00s] DEBUG: Loading user config from /etc/lightdm/users.conf
    [+0.01s] DEBUG: User lightdm added
    [+0.01s] DEBUG: User pishi added
    [+0.42s] DEBUG: Got signal 10 from process 478
    [+0.42s] DEBUG: DisplayServer x-0: Got signal from X server :0
    [+0.42s] DEBUG: DisplayServer x-0: Connecting to XServer :0
    [+0.42s] DEBUG: Seat: Display server ready, starting session authentication
    [+0.42s] DEBUG: Session pid=484: Started with service 'lightdm-greeter', username 'lightdm'
    [+0.42s] DEBUG: Session pid=484: Authentication complete with return value 0: Success
    [+0.42s] DEBUG: Seat: Session authenticated, running command
    [+0.42s] DEBUG: Session pid=484: Running command /usr/sbin/lightdm-gtk-greeter
    [+0.42s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
    [+0.42s] DEBUG: Session pid=484: Logging to /var/log/lightdm/x-0-greeter.log
    [+0.43s] DEBUG: Activating VT 1
    [+0.43s] DEBUG: Activating login1 session /org/freedesktop/login1/session/c8
    [+0.49s] DEBUG: Session pid=484: Greeter connected version=1.10.1
    [+0.54s] DEBUG: Session pid=484: Greeter closed communication channel
    [+0.54s] DEBUG: Session pid=484: Exited with return value 139
    [+0.54s] DEBUG: Seat: Session stopped
    [+0.54s] DEBUG: Seat: Stopping; failed to start a greeter
    [+0.54s] DEBUG: Seat: Stopping
    [+0.54s] DEBUG: Seat: Stopping display server
    [+0.54s] DEBUG: Sending signal 15 to process 478
    [+1.16s] DEBUG: Process 478 exited with return value 0
    [+1.16s] DEBUG: DisplayServer x-0: X server stopped
    [+1.16s] DEBUG: Releasing VT 1
    [+1.16s] DEBUG: DisplayServer x-0: Removing X server authority /run/lightdm/root/:0
    [+1.16s] DEBUG: Seat: Display server stopped
    x-0.log:
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.14.0-4-ARCH x86_64
    Current Operating System: Linux pishi 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
    Kernel command line: initrd=\initramfs-linux.img root=/dev/sda3 rw
    Build Date: 14 April 2014  08:39:09AM
    Current version of pixman: 0.32.4
            Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 23 17:48:16 2014
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension Present
    Initializing built-in extension DRI3
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Loading extension NV-GLX
    Loading extension NV-CONTROL
    Loading extension XINERAMA
    (EE) Server terminated successfully (0). Closing log file.
    x-0-greeter.log is empty

  • CS4 upgrade just unpacks and disappears

    I downloaded InDesign (a .7z file and an .exe) and starting the exe which successfully installed InDesign.
    Same type of download for PS CS4 and started the .exe file which unpacks all the files and then the window disappears and there is no further activity.
    Any suggestions about what is wrong?
    Windows XP SP2
    Rob

    You may have been low on temporary disk space. In that case the downloader may not have received the "I'm done" message from the unpacker and not initiated the setup. Shouldn't happen, but alas... The joys of software installation. ;-) If it worked the manual way, then don't worry.
    Mylenium

Maybe you are looking for