Copy Keyframes from Spreadsheet AE CS5.5

I've copied position keyframes from an AE composition to an Excel spreadsheet, did some editing and now I'm trying to copy/paste the new data back into the composition layer. The "Paste" will not work. I'm sure it must be something simple, but I cannot come up with it. Any ideas? Thanks for your help.

You should use a plain text editor.
I forgot to mention that bezier information is not translated outside of AE. You'll end up with straight lines between points. If that's what you are seeing then that is normal. The copied keyframe data should look like the top of this exampls (invisibles showing) not like the bottom example (pasted from a word processor)
Once again, don't expect curved paths or easing to be reproduced or edited. These values do not leave AE. I don't know where they are hidden, but when the clipboard data is sent to another app all interpolation between keyframes is lost.

Similar Messages

Copy actions from CS4 to CS5

Can't find out how to copy my own default actions from CS4 to CS5. I have found something called "imported" actions in CS4 and copied those - which worked - but I have other default actions that I cannot find out to copy from CS4 to CS5.

[email protected] wrote:
Hi there! Mac User ...
How do I move/copy my old actions from the CS4 actions folder to the CS5 one?
Where is the location of those folders on my system?
Many thanks!
If you have them in the standard location for CSX they will be in:
~/Library/Application Support/Adobe/Adobe Photoshop CSX/Presets/Actions/
Where 'X' is 4 or 5.

Copy New Document Presets from CS4 to CS5.5

I had a number of document presets saved in InDesign CS4 and just realized that I don't know how to copy them from CS4 to CS5.5 so I don't have to recreate them again (which is what I've done in previous upgrades). I haven't found anythng that helps with the name or location of the presets. Can someone please point me in the right direction?
Thanks!

I am constantly losing my CS4 Indesign page presets. I did the define and stored the files. Today, I lost them again, so went to load my saved files, but only one preset saved. Not sure if it was the first preset saved or the last. Do you have to save for every document preset you make? I would think this would all be on one file. I am going to try again, just incase I forgot to save it correctly.

Copying keyframes in motion parameters

Sometimes it might be necessary that you need the same values from one keyframe for a new one. Is it possible to copy keyframes (eg scale, rotation, center, opacity etc) to new keyframes?
For example: Made a keyframe in the timeline for CENTER (-45,73 -36,69). Then 5 keyframes further I need a CENTER-keyframe with the same value. How can I copy it?
I hope you'll understand. My English is not too good. Thanks in advance.
Peter
Message was edited by: peter.roek

Control-K sets keyframes in every category of Scale, Crop, Distort. It's much faster than having to click the mouse button when you have more than just one parameter. But if you are just adjusting the Center value then there's not much time savings.
I can't tell you what workflow will work best for you, but if I had to set multiple keyframes, and a number of them had the same parameters then I would quickly set all of them with the same parameters. After which I would go back and adjust the ones that varied, but that's just me.
If you wanted to copy keyframes from one clip to another clip you could do so by copying the clip and then pasting attributes [basic motion]. I do not know of a way to copy a keyframe from one portion of a clip and pasting it into the same clip

Can't paste copied entries from online CSV file into Excel spreadsheet (chatted with zzxc on 5/3/10 at around 2.30 CST but got disconnected. did not get an answer ...)

Here is the transcript of a chat with Firefox community member zzxcon May 3/10
You are now chatting with Firefox community member zzxc
zzxc: Hello
zzxc: What happens when you attempt to download a .csv file?
seegal: hello
seegal: it doesn't copy
zzxc: how are you trying to copy?
seegal: pls bear with me I'm a slow typist. Just copy selected text
Biolizard has joined the conversation.
zzxc: ok - which text are you selecting?
seegal: I reconcile my checkbook (spreadsheet this way). I copy the items in my online bank acc and paste it to the spreadsheet
seegal: I'm using Firefox /2.0.0.19. Have no problem to do this.
zzxc: Which version of OS X?
seegal: In all newer version nothing happens when trying to paste- just doesn't paste
zzxc: Firefox 2.0.0.x is no longer supported, and hasn't been supported in over a year
zzxc: Paste into Excel, from Firefox?
seegal: Sorry, I'm ahead... /2.0.0.19
seegal: Yes. I open my bank acc in Firefox
zzxc: Which version of Excel?
zzxc: It would really help if you could tell me step by step what you're doing.
seegal: First re: your previous question: it's OS 10.4.11
seegal: About Excell: it'as 2004 version - the lasat one produced for Macs. The specific version is 11.3.7
seegal: So I open my bank acc online in Firfox (my primary browser). I copy the latest entry in the account and paste it into my Excel spreadsheet.
zzxc: so, you copy direct from the web page without downloading a CSV file?
seegal: What do you mean by downloading to CSV file? I could export from the https://chat-support.mozilla.com:9091/webchat/getimage?image=sendmessage&workgroup=support%40workgroup.chat-support.mozilla.comFirefox to the CSV file, but the other way around?
zzxc: Are you copying your bank statement directly from the web site to Excel using the clipboard?
seegal: sI don't use the clipboard. This is a mac. There is no need to do that. In PC it would be yes.
zzxc: I need to know the exact steps you're taking to get them into excel
zzxc: And I need to know what exactly goes wrong in the latest version of Firefox.
seegal: Do you have a mac there with Firefox and Excel? It would be very easy to reproduce. Imagine you open an online bank acc, select some entries , click "copy", than proceed to your already open Excel spreadsheet and click' paste". That's it!
zzxc: When this happens, do you get cryptic code pasted into Excel?
seegal: As I said before: in all newer versions starting with 3.0 when I go to Excel to "paste" from my bank acc nothing happens. It does not paste. No, I don't get a cryptic code pasted, just NOTHING.
zzxc: what if you paste into MS Word instead?
seegal: haven't tried that, the formatting most likely would be lost. Tried that with an other Exc el spreadsheet- it lost all the formating and pasted as continous text.
== This happened ==
Every time Firefox opened
== Pls. see copy of the chat above. THIS A MAC OS X. In older versions, prior to 3.0 I could copy from CSV file on the website Ibank acc) and paste directly to my Excel spreadheet to reconcile my account.

See also:
Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852
TableTools: https://addons.mozilla.org/firefox/addon/2637

Copy-Paste From Other Apps (like PPT 2004) Into CS5 Broken ? - OS 10.6.3

Hi,
New Mac, so to avoid problems went for the new post-Snow Leopard Photoshop CS5. Oops.
Copy-Paste From Other Apps Into CS5
Pasting images/photos from Powerpoint 2004 to CS5, I experienced the exact problem posted slightly off topic by james norrington in the thread "CS5 does not let me copy & paste file names." It was not answered and is quoted here:
---"I am using CS5 Photoshop and Office 2004 on 10.6.3. I was using 10.4 until a few weeks ago and it worked and still works with other macs in the office using CS4. I can copy and paste from powerpoint but it cuts the pictures in half and does not know what the res. of the image is. Also when I go from photoshop to powerpoint the image res. is also not preserved."---
Besides that, I also found copy-paste from a digital camera photo.jpg from Preview to CS5 doesn't respect the resolution either. Directly opening the photo into PS CS5, fine.
From the earliest PS, always was able to copy any image to clipboard, have a new document dialog box come up pre-filled with correct original WxH pixels, original resolution, color mode, etc., and just paste into the new document - perfect fit (even the oddball PPT 576 ppi). Now a shift and cut-off. Don't have PPT 2008 to test pasting from there.
I have also found that a similar but less severe image cut off happens when copy-paste from PPT -> Preview, or -> TextEdit, or -> drag and drop picture clipping.
Opening Image File in CS5
Even an original 300 dpi tiff file wrongly went to 72 ppi etc. when opened directly into CS5. Converted the file to a jpeg in Preview - that jpeg file could be opened into CS5 correctly, reconverted the jpeg to TIFF in Preview, still opened OK (not counting loss of image quality). Still couldn't copy paste from either document into CS5 correctly. One difference I noticed in the converted files was that more information was available in the Preview file info. Maybe that made the difference in opening the file correctly.
I'd welcome any suggestions. Thanks.
---detail of tiff file ---
original
     GENERAL
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Pixel Height: 1033
     Pixel Width: 1315
     TIFF
     Compression: LZW
     Photometric Interpretation: RGB
     Software: Image-Pro Plus
     Y Resolution: 300
After conversion to jpeg in Preview"
GENERAL
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Orientation: 1 (Normal)
     Pixel Height: 1033
     Pixel Width: 1315
EXIF
     Pixel X Dimension: 1315
     Pixel Y Dimension: 1033
TIFF
     Color Model: RGB
     Depth: 8
     DPI Height: 300
     DPI Width: 300
     Orientation: 1 (Normal)
     Pixel Height: 1033
     Pixel Width: 1315
----END---

Thanks to Chris for the explanation of the dueling clipboards.
It's still frustrating, but since I still have a CS2 license from the dead G4 the current Mac replaced, I can try that (wonder if they can coexist), or maybe I could use an older Mac for this particular situation.
As for the .tif file, it was generated by a Mac OS 8.5 era image capture program that we are forced to use, and the analysis was that the app does not properly encode the TIFF tags to acceptable standards. Preview 5.0.2 just guessed right from the little information that was included - but it didn't work when tried with Preview 3.0.9 on an OS 10.4 Mac. So this was a unique situation.

Indesign CS5 crashing public.dll when copying pages from one document to another

Hello,
I have several Lenovo W520 (Core i7-2720, 8GB ram, Quadro 1000M) and a couple Dell M6500 (Core i7, 4GB ram, Quadro FX 2800M) all running Windows 7 Pro x64, the latest video drivers and Adobe CS5, including Indesign 7.0.4. We have several different Indesign docs that for the purpose of interactive Table of Contents, are copying pages from one to another to end up with one master document. On the majority of the documents, copying as few as one page to another doc crashes Indesign with the windows system error below.
Faulting application name: InDesign.exe, version: 7.0.4.553, time stamp: 0x4d890440
Faulting module name: Public.dll, version: 7.0.4.553, time stamp: 0x4d8903ca
Exception code: 0xc0000005
Fault offset: 0x00038727
Faulting process id: 0x18c0
Faulting application start time: 0x01ce1f68465d45de
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS5\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS5\Public.dll
Report Id: fa196aee-8b5b-11e2-9afa-a088b43f1cec
We have tried working with the documents on different machines (both specs outlined above), and copying different pages from one doc to another in varying quantities. The documents do not have any link errors or other references that need to be corrected.
Any suggestions or other things to look at?
Thanks.

HI. Same problem Here. i will now trying to reinstall the software. hopefully it will help me.
What could be the cause of this error? its not in english sorry for that.
Název protokolu:Application
Zdroj:         Application Error
Datum:         22.4.2013 14:09:32
ID události:   1000
Kategorie úlohy:(100)
Úroveň:        Chyba
Klíčová slova: Klasické nastavení
Uživatel:      Není k dispozici
Počítač:       NB-CZ-1209.cz.corp.mann-hummel.com
Popis:
Název chybující aplikace: InDesign.exe, verze: 7.5.3.333, časové razítko: 0x4f6b9e72
Název chybujícího modulu: Public.dll, verze: 7.5.3.333, časové razítko: 0x4f6b9c77
Kód výjimky: 0xc0000005
Posun chyby: 0x000df832
ID chybujícího procesu: 0xad4
Čas spuštění chybující aplikace: 0x01ce3f522c7f2f21
Cesta k chybující aplikaci: C:\Program Files\Adobe\Adobe InDesign CS5.5\InDesign.exe
Cesta k chybujícímu modulu: C:\Program Files\Adobe\Adobe InDesign CS5.5\Public.dll
ID zprávy: 7d476cca-ab45-11e2-b201-009c02185dea
Kód XML události:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-04-22T12:09:32.000000000Z" />
    <EventRecordID>12469</EventRecordID>
    <Channel>Application</Channel>
    <Computer>NB-CZ-1209.cz.corp.mann-hummel.com</Computer>
    <Security />
</System>
<EventData>
    <Data>InDesign.exe</Data>
    <Data>7.5.3.333</Data>
    <Data>4f6b9e72</Data>
    <Data>Public.dll</Data>
    <Data>7.5.3.333</Data>
    <Data>4f6b9c77</Data>
    <Data>c0000005</Data>
    <Data>000df832</Data>
    <Data>ad4</Data>
    <Data>01ce3f522c7f2f21</Data>
    <Data>C:\Program Files\Adobe\Adobe InDesign CS5.5\InDesign.exe</Data>
    <Data>C:\Program Files\Adobe\Adobe InDesign CS5.5\Public.dll</Data>
    <Data>7d476cca-ab45-11e2-b201-009c02185dea</Data>
</EventData>
</Event>

Copy and paste from CS4 to CS5

Hi to all!
In the previous thread about the Lighting Filter someone mentioned the option to do some work in CS4 (in my case the noise reduction, sharpening or SW conversion with NIK plugins, which do not work in 64 bit in CS5), and than copy / paste the result into CS5.
How is that procedure done exactly?
Or is it not easier just to save the file as 'save as', and reopen it in CS5?
Or should I skip CS4 totally, and just open / close CS5 in different bit modes, depending whether I'm going to use those plugins or not?
I'm just trying to find my right workflow / workaround. How are You doing it?
Michael

The way it SHOULD work is that you Select All, copy the pixels, swap to CS5 and Paste.
I noticed that there is something very odd happening with the clipboard, when trying to copy and paste between CS4 and CS5. Very often the result is downsampled, and is roughly 37% smaller than the full size. At the moment I have no idea what could be causing this.

Is it possible to transfer custom web galleries from CS3 to CS5?

Does anyone know if it is possible to transfer my custom web galleries from PS CS3 to Adobe Bridge CS5?

Collections are not a physical directory. It is kind of like a spreadsheet that tells Bridge where to find the pictures and display them, so you can't just move the folder.
Smart collections are a little easier to transfer, but do not think CS3 had those.
Not an expert here but believe you would first have to have the same computer and HD so that all the picture loacations are the same.
Then go to User/App Data/Roaming/Adobe/Bridge/Collections and copy file from CS3 and insert into same spot for CS5.
Maybe someone that have done this will jump in and prove me wrong.

Mountain Lion: Copying mailbox from one user to another user on the same mac

When I bought the mac I had only one email address. Since then I have accumulated 3 more addresses. I created another User on the same MAC to seperate the personal emails from the 3 new email addresses, that I use for business.
There are some mailboxes from the 1st account that has business information in them that I want to move to the 2nd User account (with the 3 e-mail addresses). I though that I could save them in the dropbox and then save them into the 2nd User accounts like I did with the documents and spreadsheets, but this does not work.
I really need to separate the Family Personal email information from the Busines Information and I do not want to just send lots and lots of emails to the accounts to get them there.
I am not using Cloud at the moment because it created some syncing issues. Because the 1st User Account and email account is synced with an iPad and iPhone that my wife uses with an Apple ID. The 2nd User (and 3 mail addresses) are synced with my iPhone and a separate Apple ID. We have separate ID's because she did not want my personal & business contacts seeping into the family email accounts
I know that this is long, but I wanted to provide as much information as possible, so that I can resolve this.
Thanks in Advance

I spent quite a few hours after this was posted trying to figure it out and I did.
Select Mailbox > Export Mailbox. This asks you a location to export the mailboxes to. It just uploads the exported mailboxes into Dropbox.
Then change the User that I want to import the mailboxes into. Select Import and select the location of where you placed the folder in Dropbox. This then imports the mailbox into a folder called Import. You then drag and drop the copied mailboxes from the Import folder to the folder in the structure you have. If you decide to delete the folders from the import folder list, do this. You can also delete the copied folders from Dropbox if you wish.
Took a while, but I got there and I'm happy now....

Why can't I do batch actions from CS4 or CS5 Bridge now when I could before?

Something has changed in my functions for doing batch actions in Bridge. In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file. When I attempt this I get a message saying 'The command "Save" is currently not available.
I try to do the same thing in CS4 Bridge. I go to the Tools menu and look for Photoshop in the drop down menu but it's not there. This is how I do batch action processing with my Windows version of CS4 Bridge. I am confused about what has changed when I was able to do batch actions routinely in CS4 and CS5 Bridge on my Mac.

Something has changed in my functions for doing batch actions in Bridge. In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file. When I attempt this I get a message saying 'The command "Save" is currently not available.
Batch using tools menu from Bridge to reach Photoshop should work as expected in both CS4 and CS5. If not then there is something wrong on either your system or install.
Go to Bridge CS5 preference and look for the section Start Up Scripts and see if there is still a Start Up Script for Photoshop CS5 present and with a checkmark in front for activation. If not try first to restart bridge holding down option key and choose refresh preferences. This should retrieve the original Start Up scripts again.
If your command save as is not available check the action and see what the save path for that acton is. If it is a copied action from an other system changes are that it still contains the save path for the old drive and if the script can't find it it provides a warning message.
Also check if the drive you save to has both read and write permission.

Read from spreadsheet: a way to automatically continue if the file is missing? (Rather than having to push "continue")

Hi,
I'm using the "read from spreadsheet file.vi" to read in data from a file that may or may not be present. The data isn't required - it's optional data; nice to have but not everybody will use it.
Of course, if the file isn't present, I get an "Error 7 occurred at Open File+.vipen File", and I have the choice of pushing either the "Continue" or "Stop" button. What I'm wondering is: is there a way to just have LabVIEW automatically continue if the file is missing? Perhaps it could alert the user to the missing file, but continue anyway? Normally I'd handle this by wiring the Error output of the function to an error indicator. But the "read from spreadsheet file.vi" function doesn't appear to have an error output.
I think my description of my question is sufficient, but I'm attaching a snippet of my LabVIEW code that shows the read from spreadsheet file function in question, and the error I get when the file is missing.
Thanks,
dan
Solved!
Go to Solution.
Attachments:
labview-read-sprdsht-error.png ‏27 KB

Dan_the_Clam wrote:
Why oh why do people hate them so much! I'm a friend of local variables!
1. They use more memory
2. They require something on the front panel (even if hidden). So that is yet another copy of your data
3. They break data flow
4. RACE CONDITIONS!!!
Dan_the_Clam wrote:
my code evolves and tends to sprawl a bit.
That tells me you do not have a good architecture to begin with. It also tells me you need to modularize your code more and use subVIs.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Extract All Embedded Files in All Folders and Save Each? Copy/Paste from PDF to Word?

I have most of what I need here, but I’m missing 2 important pieces.
#1) I want to copy/paste from all PDF files in a folder and paste the copied data into a single Word file.
It works fine if I have ONLY Word docs in my folder. When I have PDF files and Word files, the contents of the Word files are copied in fine, but the contents of the PDF files seem to come in as Chinese, and there is no Chinese in
the PDF, so I have no idea where that’s coming from.
#2) I want to extract all embedded files (in all my Word files) and save the extracted/opened file into the folder. Some embedded files are PDFs and some are Excel files.
Here the code that I’m working with now.
Sub Foo()
Dim i As Long
Dim MyName As String, MyPath As String
Application.ScreenUpdating = False
Documents.Add
MyPath = "C:\Users\001\Desktop\Test\" ' <= change this as necessary
MyName = Dir$(MyPath & "*.*") ' not *.* if you just want doc files
On Error Resume Next
Do While MyName <> ""
If InStr(MyName, "~") = 0 Then
Selection.InsertFile _
FileName:="""" & MyPath & MyName & """", _
ConfirmConversions:=False, Link:=False, _
Attachment:=False
Dim Myshape As InlineShape
Dim IndexCount As Integer
IndexCount = 1
For Each Myshape In ActiveDocument.InlineShapes
If Myshape.AlternativeText = PDFname Then
ActiveDocument.InlineShapes(IndexCount).OLEFormat.Activate
End If
IndexCount = IndexCount + 1
Next
Selection.InsertBreak Type:=wdPageBreak
End If
On Error Resume Next
Debug.Print MyName
MyName = Dir ' gets the next doc file in the directory
Loop
End Sub
If this has to be done using 2 Macros, that’s fine.
If I can do it in 1, that’s great too.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hi ryguy72,
>>When I have PDF files and Word files, the contents of the Word files are copied in fine, but the contents of the PDF files seem to come in as Chinese, and there is no Chinese in the PDF, so I have no idea where that’s coming from.<<
Based on the code, you were insert the file via the code Selection.InsertFile. I am trying to reproduce this issue however failed. I suggest that you insert the PDF file manually to see whether this issue relative to the specific file. You can insert PDF
file via Insert->Text->Object->Text from file.
If this issue also could reproduced manually, I would suggest that you reopen a new thread in forum to narrow down whether this issue relative to the specific PDF file or Word application.
>> I want to extract all embedded files (in all my Word files) and save the extracted/opened file into the folder. Some embedded files are PDFs and some are Excel files.<<
We can save the embedded spreadsheet via Excel object model. Here is an example that check the whether the inlineshape is an embedded workbook and save it to the disk for you reference:
If Application.ActiveDocument.InlineShapes(1).OLEFormat.ClassType = "Excel.Sheet.12" Then
Application.ActiveDocument.InlineShapes(1).OLEFormat.DoVerb xlPrimary
Application.ActiveDocument.InlineShapes(1).OLEFormat.Object.SaveAs "C:\workbook1.xlsx"
Application.ActiveDocument.InlineShapes(1).OLEFormat.Object.Close
End If
And since the Word object model doesn't provide API to save the embedded PDF, I would suggest that you get more effective response from PDF support forum to see whether it supports automation. If yes, we can export the PDF as embedded spreadsheet like code
absolve.
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why can I not copy text from a file and paste into "File Name" when saving?

I thought I used to do this but I cannot copy a string of text from within AI (CS5, CS6 or CC) then "save as" and paste into the "file name" field. Why would this be?
This proceedure works fine in Photoshop.
Mac OSX 10.7.5.

I am copying the characters not the object. Something seems to have changed at the system level. I can paste the text to other applications (Skype, Word, etc.) but not the "Save" dialog. I have been pasting the text to a Skype message window and re-copying. Then it will paste into the save dialog. Weird.
I see you are on 10.6.8. Maybe it's a system difference.

Upgrading from CS3 to CS5 issues

I work at a medium size College on a pretty small team, 1 editor/writer, 1 communications coordinator, and 1 designer (me). I've been using InDesign (ID) for 5 years now and we added on the InCopy (IC) workflow a few years ago with CS3 (both of us then had CS3). The editor and I just recently upgraded from CS3 to CS5 and we've hit a snag. I opened a project, the Academic Catalog in fact, in CS5 that we began in CS3 which we were almost finished with and when I tried to check out a story I got this error.
"This story needs to be converted to "InCopy Document" format in order to edit it."
The editor got the same message in IC. So I thought maybe files created by CS3 for IC don't work with CS5 so I decided to try to unlink the INCX files in ID and relink. Sure enough it created a new ICML file which the editor was able to open, edit, and save in IC. And I thought I had my problem solved until I opened the file in ID; when I tried to update the linked file ID crashed. I've tried unsuccessfully to get the updated stories from IC to update in ID w/o crashing. I've restarted the computer; it is Windows afterall. I've run 'Updates' in both our programs, and it says there are none. I've tried tossing the ID and ICML file; fortuanalty I was smart enough to do all this with a copy of the orginal CS3 file. I followed all my above steps a second time and it's still crashing. I'm not sure what to do at this point. Does anyone have any ideas? Is there a known issue like this?
btw, we're both running Windows Vista and both in CS5 (7.0).

AM
I might just have to go back to CS3 to finish this project up—fortunatly I foresaw an issue like this and kept CS3 installed. That will most likely solve the problem with this project, provided it too does not crash. And that is my concern for future 'new' projects in CS5, are those going to crash too? I think I'll do some testing with my editor.
Bob,
What type of additional info would help?
Thanks,
Colleen

Copy Keyframes from Spreadsheet AE CS5.5

Similar Messages

Maybe you are looking for