Copy Master Data from BW cube to BPC cube

Hi,
I need to copy a master data from BW cube to BPC cube.
Can I do this from BW? That is, Can I copy master data from the view of the cube of BPC in BW?
I do this from BW and then I see the master data in my BPC cube from the BW view, but when I open my cube in the BPC environment, I don't see nothing of the master data.
What's the problem?
Regards,
Miguel.

Hi Miguel -
I think you are asking if you can copy transactional data from a BW cube into a BPC cube (cubes do not contain master data).
If this is what you want to do, yes the BPC IMPORT package is a delivered data manager package that allows you to select a BW cube, transformation file, and additional options (such as work status checking and default logic execution). The use of the Data Manager [process is the "best practice" since you will need to transform the BW data model into the BPC data model and the tools delivered in the IMPORT data manager package are ideally suited for the job. You can automate this process by following the guide at:
[https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides|https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides] The specific document is: "How to Export BPC Transaction Data Using a Custom Process Chain"
If you are actually asking for the process for loading master data into BPC dimensions, please read the following "How To" guide that describes the current best practices:
[https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides|https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides] The specific document is: "How to Automate Master Data Loads in BPC NW"
Regards,
Sheldon

Similar Messages

Import Transaction Data from BW Cube to BPC Cube

Hi,
Is there any document that explain how i can import/copy transactional data from bw cube to bpc cube like this below pic. http://img841.imageshack.us/img841/6998/prof.jpg
Thanks in advance.

Hi Again,
With these documents I can import transactional data with a single keyfigure but if there are more than one keyfigure, importing and assigning keyfigures to dimensions might get confusing.
For example i have two keyfigures "zbgstsad" and "zbgstsf" in bw cube and I have two account member in "S_ACCT": "S_F", "S_A". I did a conversion file with "zbgstsad(ext)->s_a(int)" and "zbgstsf(ext)->s_f(int)" rows. But i am not sure what i have to put instead of "?".
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=S_ACCT
*MAPPING
RPTCURRENCY=0CURRENCY
S_ENTITY=ZBGENTITY
S_ACCT= ?
S_TIME=0CALMONTH
S_CATEGORY=*NEWCOL(ACTUAL)
S_OB=0UNIT
S_URUNLER=ZBGURNLR
AMOUNT= ?
*CONVERSION
S_ACCT=[COMPANY]B_ACCT.XLS!CONVERSION
TIME=[COMPANY]B_TIME.XLS!CONVERSION
What do you recommend?
Thanks in advance.
Burak
Edited by: boguner on Aug 9, 2010 2:34 PM
Edited by: boguner on Aug 9, 2010 2:40 PM

Partitioning two Years Of Data From One Cube Yo Another

Hi Experts,
Can any one please help me on the following issue.
I got the requirement where I need to copy the data from one cube to another having unequal number of dimensions.
I have achieved this using Transparent partitioning, But I could be able to copy only one year data.
In cube1 I have the months like Jan, Feb...Dec and in cube2 I have the structure like Jan-11..Dec-11, Jan-12...Dec-12.
While creating the partition how can I map the Jan with Jan-11 and Jan-12.
Thanks In Advance,
Ram

You can map manually. it is possible.

Load master data from BI 7.0 to BPC NW 7.0

From BPC 7.0 NW, SAP has standard package to load transaction data from BI cube to BPC cube, However, it dose not have the standard package to load master data from BI master data to BPC master data(dimension),
Is this mean that we have to load the master data from BI to BPC through flat file? or we can create some customer package(process chain) to load it?

Hi JW,
You can automate the master data load from BW if that is what you are trying to accomplish. Have you seen this guide: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827 ?
Additionally you can also develop a custom process type and use it in a custom process chain alongwith a data manager package to load master data if you don't want to use any flat files at all.
Regards
Pravin

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Issue while loading master data from BI7 to BPC

Dear Experts,
I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
What could be the reason to not getting BI infoobject as source in BPC?
Thanks in advance...
regards,
Raju

Dear Gurus,
My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
Thanks and regards,
Raju

Issue while loading master data from BI to BPC

Dear All,
I am loading master data from BI to BPC using the process chain /CPMB/IMPORT_IOBJ_MASTER. I ran the package and package status was success. But few member ID's which are available in BI are not getting loaded in BPC. Nearly I have 1300 ID's in BI. Out of 1300,only 1270 ID's are loaded in BPC.
I haven't restrict any ID's using conversion file as well.
What could be the reason? How can I overcome this and load all member's ID in BPC?
Thanks & Regards,
Ramesh.

Ramesh,
Whats the write mode you have chosen for the CPMB/IMPORT_IOBJ_MASTER chain ?
Check if you have the Update mode ..
Hope this helps...

How to copy data from one cube to other?

Hi experts
I have 2 system defined cubes..
Now in 1st cube there is data till 2007 which is coming from 2LIS_04_P_MATNR.
I want to copy this data in 2nd cube..
Please suggest me.. how can I do it?
Regards
Swati

swathi..
create a export datasource option for exisintg the cube...
Then replicate the same exported datasource which you craetd.
Then do the trasnformation one to one from the exisitng cube(i mean which the datamart crated by u)
Now load the infopackage from the old cube to new cube...
we implemented the same in many of our data targets in the current project

BPC NW - Error Importing Master Data from BI to BPC

Hello,
I am importing MD from BW to BPC; openhub is working as required, and creating the corresponding file in the application server.
However, when I run the package from Data Manager, it is displaying the following error:
"An exception with the type CX_SY_STRUCT_COMP_NAME occurred, but was neither handled locally, nor declared in a RAISING clause.
No Component name specified for Component 6."
I have been looking other posts and OSS notes, and looks a problem related to DB; however in this case we do not have any dump.
Has anyone encountered the same issue?
Thanks&Kind regards,
Begonia

Hi Begonia Boloqui,
After you extracted master data from BI using Openhub. The file is available in the application server.
Before you run the package from Data Manager.
Please examine the file data contents.
From the Action Pane, Click Manage Data and then clicking Preview data file
System allows you to preview the first 200 lines of a data file. Check whether data record is compatible with dimension definition and the mapping from external to internal members.
Looks like error is with COMP_NAME field?
Hope this information is useful.
Regards,
Rajesh Muppala.

Which t.cod to copy in a massive manner the G/L Master data from a Company?

Hi All,
could anyone show me the customizing transaction to copy in a massive manner the G/L Master data from a Company code to another?
Thanks
Moderator: Please, search before posting

Hi Rossi,
You can do this through transaction code OB_GLACC01. Please check it and let us know if you run into any issues.
For more information check the following area.
SPRO-GL ACCOUNTING-GL ACCOUNTS-MASTER DATA-PREPARATION-GL ACCOUNT CREATION AND PROCESSING-CHANGE GL ACCOUNTS COLLECTIVELY.
Warm regards,
Murukan Arunachalam
Edited by: Murukan_A on Jan 23, 2012 8:47 PM

Export Master Data from BPC to BW

I am about embark on creating a solution to export master data from BPC to BW (NW7SP6) and I was wondering if anyone out there has covered this ground previously and has any information on this process that they wish to share?

As of now, you could export the dimension memebr data and upload to BW info object; you may be able to do it with data manager / process chain.
Ravi Thotahdri

Extraction of master data from R3 into BW.

Hello.
This is my new SAP BI assignment:
I'm going to use standard SAP InfoOjects (from Business Content) in order to build a new InfoCube (Logistics - MM/SD) with for example standard Characteristics like: 0MATERIAL, 0MATL_GROUP, 0SHIP_TO, 0SOLD_TO, 0SALESORG, 0PROD_HIER, 0CUST_GROUP, 0COMP_CODE... (_Note: NO generic extraction involved_)
My question is, do I need some extra "Process Chain" (Tcode: RSPC) in order to bring all these characteristics and all associated master data/texts, attributes and hierarchies from the R/3 ( source system) into BW, or these data will come with a standard extractor into SAP BW? I mean no extra work is needed for bringing master data from R/3 in to BW?
Another question, Is there any way to know which Characteristics need an extra "Process Chain" (Tcode: RSPC) in order to bring associated master data/texts, attributes and hierarchies from the R/3 ( source system) into BW?
Regards
ASantos

Hi ,
1. In SAP R3 system go to the transaction RSA6, find the application component then select the data Source and view the structure of the data source and select all the required fields.
2. As you said no generic data source involve , then create the generic data source using the transaction SBIW, generic data sources have many creation options. view is the simplest.You can create a viewwith all requred fields on the top of different source table fieldsa per your requirement.
3.Now go to the transaction RSA3 the extractor checker ,give name of your ectractor as input and check this data source.
4.go to BW system,transaction RSA1, find the source system then replicate the metadata in the corresponding application component.After replication only the structure of the data source is copied not the actual data.
5. Create InfoPackage, so that the actual data is loaded in the PSA table.
6. Create transformation between the data source and the corresponding data target (InfoProvider - infoobject, cube, DSO). This is done by mapping the source fields with target fields using the appropriate rule type.If there are some update rules in R3 system then you may need to write some field level routines depend on your requirement.
7.Create DTP between the source and target, and execte it .It will load actual data into the target.
8.then more transformation and DTP can be created and executed according to the requirements, like from DSO to cube. Thus the data is available in BW data targets on which query can be generated for reporting.
I don't think you need any process chain for this .this is manual process but loading DTP and all can be automated via creating process chain .
For more guidence you an refer this document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40394d9b-93b9-2d10-9f9a-f13118a4776d?quicklink=index&overridelayout=true
Hope this will be helpful.
Regards,
Jaya

Move data from one cube to another cube

Hi,
I am on BW 3.5 and I have moved the data from one cube to another cube and found that the number of records in the original cube does not match to the newly created cube. for eg. if the original cube contains 8,549 records then the back up cube contains 7,379 records.
Please help me on what I need to look on and if in case the records are getting aggregated then how do I check the aggregating record.
Regards,
Tyson

Dear tyson m ,
check with any update rules in ur transfer.If so check in it.
Just go through these methods for making transfer from one cube to another cube fully without missing data.
Update rules method
if it's updated from ods, you can create update rules for cube2 and update from ods
or you can try datamart scenario
cube1 right click 'generate export datasource'
create update rules for cube2, assign with cube1
rsa1->source system->bw myself, right click 'replicate datasource'
rsa1-> infosource -> search 8cube1 name
(if not get, try right click root note 'infosource'->insert lost node(s)
from that infosource, you will find assigned with datasource, right click and 'create infopackage', schedule and run.
Copy from
While creating the new cube give the cube name in the "Copy from" section. It would copy all the characteristics and Key figures. It would even copy the dimensions and Navigational attributes
Another option is:
The steps for copying the contents of one cube to another:
1. Go to Manage -> Recontruct of the new cube.
2. Select the "selection button"(red , yellow, blue diamond button).
3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
4.Execute and the new cube would be loaded.
Its all that easy!!!!!!
Refer this link:
Copying the structure of an Infocube
Reward if helpful,
Regards
Bala

How to extract HRM master data from R/3 into LDIF file?

Recently I have been asked to provide an extract from our R/3 system
with some Human Resource master data. The extract has to be in the LDIF
format (LDAP data interchange format). It is needed to import into a
DirX metahub solution from Siemens.
How can this be done most easily?
(does SAP provide tools, can XI do this?) or do we have to write a
customized abap to do this?
Thanks in advance
Kind regards
Alex Veen

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

Transport Master Data from one server to another server

How can I transport the master data from one server to another server?
Client copy will not be possible.
Regards,
Subhasish

Hi,
Look at the below link, you will understand
http://help.sap.com/saphelp_45b/helpdata/en/cc/f22c7dd435d1118b3f0060b03ca329/content.htm
Regards
Sudheer

Copy Master Data from BW cube to BPC cube

Similar Messages

Maybe you are looking for