Copy Material Master data - cannot copy "Proportion/Prod.Unit" view

Hello,
When I try to create material master data using the "Copy from..." option, data from the "Proportion/Prod.Unit" view is not copied to the new material. We are using SAP for Mill products.
Any clues?
Regards,
Joao

Hello Joao,
There are two things, which have to be done :
The first thing of course is, that for the field MARA-KZWSM the field
"Propose Field Content from the Reference" must be set in transaction
OMSR.
The second is, that the user have to enter this screen, because if he
don't display this screen, then it is technically not possible to
copy the reference values.
(To copy this data from the reference material you have to go to the
subscreen SAPLMWSM 8030 and press enter).
Regards,
Mauro

Similar Messages

FM to copy material master data

Hi there
I am looking for an FM where i can copy existing material master data to a new one. In my case the material is a material variant and therefore i also want to copy the characteritic values of this variant. While copying i want to change some of the characeristic values of my oroginal material master, so that the only difference to the new material variant are characteritic values. All other date (sales, plant and so on) can be the same
Regards
Markus

If you want to copy the properties of material A to material B
first copy the FM
goto se37>Press cntrl+f5>enter the from and to FM and FG and press ok.
BAPI to Copy Materials from one Plant to Another
http://www.sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm
regards,
srinivas
*reward for useful answers*

MM - Material master data - move standard field to another view

Hi everyone,
ÉCC 6.0 - release 7.0.
I've been adding many custom fields in Material master data MM01/02/03. Now I got a problem because we have to use a standard field in another view.
The field MARA-HERKL is set up to 'SV'(attribute V_130F-PSTAT):
Warehouse management = S
Sales = V
I want to add 'K - Basic data' in this field's attribute at OSMR Tcode , but this attribute is disactivated. I can not change this value.
I've check this note 306966 that mention: You cannot create new entries and delete entries in client 000. This client contains only the entries delivered by SAP which are used for distinguishing customer-specific fields and SAP standard during the maintenance of the other clients.
Is there any problem whether I delete this field and afterwards create it with the new values?
I'm not in client 000. So, I want to just make sure I will do a legal change.
thank you in advance,
Alexandre

None tips, Closed.

How to add a role so user can do Export, Copy & paste Master Data?

How to add a role so user can do Export, Copy & paste Master Data? Thanks!

Add S_GUI to the user role.

Copy only master data

Dear All,
Is it possible to copy only master data using TDMS Client Cpoy.
In TDMS there is a pack called ERP Initial Pack for Master data & Customizing, but is there any chance to copy only Master Data by skipping Customizing.
Regards,
Raja Ram

Hi Raja,
seems to me that this is a complete other question.
For details concerning HCM I suggest you to look into the operations guide on
Links, Documents, Support Pack Schedule
Regards,
Eddy

Client Copy: copy only master data

Hi!
Is it possible to copy only master data from e.g. client 100 to client 200?
If yes, which technical steps are necessary (tcode, etc.)?
Client 100 is the copy of client 200 without master data.
Thank you,
regards
Thom

You can Copy all the customizing data from one client to another client using clent copy(SCC1). Ie, data stored in a customizing request.

Client Copy "only" Master data

Hi,
How can i copy only master data from a client ?
Thank's

Hello Eduardo,
Client copy of master data alone maynot possible. I mean even if you use SAP_APPL even then transactional data will also get migrated. So I would suggest of sending the data through ALE (idocs).
We do it on large scale regularily.
But still please wait for opinion from others. May be they might have a better solution.
Regards.
Ruchit Khushu.

Material Master Data load failed

Hi All,
I am loading material master data. I have around 8055 records in R/3. The load has failed with an error "Non-updated Idocs found in Business Information Warehouse" and asking me to process the IDocs manually. I have checked in WE05 for the IDocs and found 3 Idocs with status 64(IDoc ready to be transferred to application).
But when I checked in the manage screen of the 0MATERIAL I could find the Transfered and Updated records as 8055. I have even checked the data in 0MATERIAL and found that all the data(8055 records) has already been uploaded.
Why is it still showing an error(load failed) even when all the data has been uploaded? What should I do now?
Best Regards,
Nene.

hi Nene/Sankar,
for material text no language please check Note 546346 - Material texts: no selection on languages
and for why idocs problem, check e.g Note 561880 - Requests hang because IDocs are not processed, Note 555229 - IDocs hang in status 64 for tRFC with immediate processing.
hope this helps.
Note 546346 - Material texts: no selection on languages
Summary
Symptom
When loading material texts from R/3 into the Business Information Warehouse, you cannot select languages.
Other terms
DataSource, 0MATERIAL_TEXT, InfoSource, InfoObject, 0MATERIAL, SPRAS, LANGU, 0LANGU, MAT_BW, extraction, selection field, delta extraction, ALE, delta, change pointer
Reason and Prerequisites
As of PI/PI-A 2001_2 Support Package 6, the selection option for the 'SPRAS' field in the OLTP system was undone in the 0MATERIAL_TEXT DataSource. (Refer here to note 505952).
Solution
As of PI/PI-A 2002_1 Support Package 4, the 'SPRAS' field is provided for selection again with the 0MATERIAL_TEXT DataSource in the OLTP system. When loading the material texts from BW, the language is still not provided for selection in the scheduler, instead all languages of the language vector in BW are implicitly requested from the source system. However, during the delta update in the source system, the change pointers for all languages in the source system are now set to processed, regardless of whether the language was requested by BW or not.
Import
Support Package 4 for PI/PI-A 2002_1_31I - PI/PI-A 2002_1_45B
Support Package 4 for PI 2002_1_46B - PI 2002_1_46C
Support Package 3 for PI 2002_1_470
In transaction RSA5, copy the D version of the 0MATERIAL_TEXT DataSource to the A version.
Then replicate the DataSources for 0MATERIAL in the BW system. The 'SPRAS' field is then flagged again as a selection field in the transfer structure of the 0MATERIAL InfoSource. The transfer rules remain unchanged. Activate the transfer rules and perform a delta initialization again.
Note 561880 - Requests hang because IDocs are not processed
Symptom
Data extraction in a BW or SEM BW system from an external OLTP System (such as R/3) or an internal (via DataMart) OLTP System hangs with the 'Yellow' status in the load monitor.
After a timeout, the request status finally switches to 'Red'.
Information IDocs with the status '64' are displayed in the 'Detail' tab.
Other terms
IDoc, tRFC, ALE, status 64
Reason and Prerequisites
Status information on load requests is transferred in the form of IDocs.
IDocs are processed in the BW ALE model using tRFC in online work processes (DIA).
IDoc types for BW (RSINFO, RSRQST, RSSEND) are processed immediately.
If no free online work process is available, the IDocs remain and must then be restarted to transfer the request information.With the conversion to asynchronous processing, it can often happen that no DIA is available for tRFC for a short period of time (see note 535172).
The IDoc status 64 can be caused by other factors such as a rollback in the application updating the IDocs. See the relevant notes.
Furthermore, you can also display these IDocs after the solution mentioned below, however, this is only intended as information.
You must therefore analyze the status text.
Solution
We recommend asynchronous processing for Business Warehouse.
To do this, you need the corrections from note 535172 as well as note 555229 or the relevant Support Packages.
The "BATCHJOB" entry in the TEDEF table mentioned in note 555229 is generated automatically in the BW system when you import Support Package 08 for BW 3.0B (Support Package 2 for 3.1 Content).For other releases and Support Package levels, you must manually implement the entry via transaction SE16.
Depending on the Basis Support Package imported, you may also have to implement the source code corrections from note 555229.
The following basic recommendations apply in avoiding bottlenecks in the dialog processing and checking of IDocs for BW:
1. Make sure there is always sufficient DIA, that is, at least 1 DIA more than all other work processes altogether, for example, 8 DIA for a total of 15 work processes (see also note 74141).
TIP: 2 UPD process are sufficient in BW, BW does not need any UP2.
2. Unprocessed Info IDocs should be processed manually within the request in BW;in the 'Detail' tab, you can start each IDoc again by selecting 'Update manually' (right mouse button).
3. Use BD87 to check the system daily (or whenever a problem arises) for IDocs that have not yet been processed and reactivate if necessary.
However, make sure beforehand that these IDocs can actually be assigned to the current status of requests.
TIP: Also check transaction SM58 for problematic tRFC entries.
IMPORTANT: Notes 535172, 555229 and the above recommendations are relevant (unless otherwise specified) both for BW and for SAP source systems.

Sales order does not extract plant information from material master data

Hi experts,
I have created a sales order. However, the plant in the shipping tab can only be manually entered.
I have made the check:
the customer material master data does not have the plant info.
the customer master data does not have it either.
It is defined in the material master data: sales:general/plant
But the sales order did not extract this information. Why does this happen?
Thank you in advance.
Best regards,
Fan

Hello Friend,
As right stated by you,
The Plant will be copied from the master data to the sales order, if not it should be manually entered
The Sequence System will search for the Plant is as follow..
1. Customer material infor record, If it was not maintained then it will search in
2. Customer master, if the entre was not maintained in the SHIPPING TAB
3. Finally it will search in the Material master in the Sales organisation data 1 in the field DELVERING PLANT field.
So please search whether the entry was maintained in that field at the sales:sales organisation data 1.
This might be the issue.
Please revert if you want further details
regards,
santosh

Program to update info record with material master data

I am trying to determine if there is a standard SAP program that can be run as a batch file to update the fields in the info record with the same fields that are in the material master? ie: Planned delivery time, Tolerance, purchasing group etc.

Hi,
There is no standard report or transaction that can do this.
The data from these fields in the material master is brought in as a default to the info record when it is created. beyond this point the Info record is treated as being the correct data regardless of what happens to the material master data and so no updates occur in the standard system.
It would not be difficult to build an LSMW job to copy the data from the material master to the info records and this would be the recommendation if you want to do this.
Steve B

Extend material master data from one plant to another plant

hi,
how can i extend material master data from one plant to another plant.
is there any sap standard transaction for this ie. bdc/t-code.
thanks in advance.......
rahul

Hi
If you want to extend the material form one plant to another then below are the possible options.
1) MM01 - Use the material in the reference and fill in copy from and to then press enter to complete the extention.This is recommended only if you want to extend very less records.
2) Use LSMW and record MM01 thru BDC recording available in LSMW and make the template in excel and convert it to .txt tab delimited format to upload more records.LSMW is the perfect tool and is used extensively in all the projects.
3) Get the help from ABAPer to create upload program and include the BDC recording.
There is no standard T code available in SAP becoz data mainatenance in the material master will be based on the industry.
Hope it will help.
Thanks/Karthik

Material master data complete in bi - infoset or multiprovider

Hi all.
for one of the reporting requirement of my client i need to extract the complete material master data in BI - from MARA, MARC, MARD, MSTLB tabls.
which i have done and stored in the infoobjects - 0MATERIAL, 0MAT_ST_LOC, 0MAT_PLANT, 0MAT_SALES.
now user want to see all the information against each material in 1 single line the multiple lines will only come in when there is plant.
which approach i shoul go for this scenario.
infoset or multiprovider.
i created infoset by using inner join but then i see only common materials, left outer join is giving me problems.like -
Invalid or missing ON condition for left outer join (0MAT_PLANT)
Invalid or missing ON condition for left outer join (0MAT_ST_LOC)
Invalid ON condition for left outer join (0MATERIAL)
kindly give your suggesstions on this.
thanks
dipika

Hello,
There are restrictions regarding left outer join in infoset:
If a left outer join is used, the following restriction applies to the right table (right operand):
·        Only join conditions with exactly one other table can be defined and
·        This table in turn cannot be a right table (right operand) of a left outer join.
Tables connected with left outer joins always form the end of a chain of tables. In this way, as many tables as you want can be linked in an InfoSet with a left outer join to a core of tables that are connected using inner joins.
The restrictions on the definition of left outer joins are due to the technical limitations of databases. These restrictions do not apply to inner joins.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/67/7e4b3eaf72561ee10000000a114084/content.htm
http://help.sap.com/saphelp_banking60/helpdata/ru/a3/96663bd194a978e10000000a11402f/content.htm
BR
Ondrej

Set default value for price unit when creating material master data

HI: Every
could you tell me how to use user-exit or else ways to set default value(such as 1000) for field "Price unit" (MBEW-PEINH) when creating material master data(MM01)?
I have try to use Exit:EXIT_SAPLMGMU_001. However, this way cannot respones it.
thanks
Henry

Hi: Ihave find out a solution
Use BADI: BADI_MATERIAL_REF
SPROlogistics general enhancement supplement or change default data (industry)
And then creating a Implementation Name
Double click method: CREATE_MATERIAL
And then write code as below:
method IF_EX_MATERIAL_REFERENCE~CREATE_MATERIAL.
c_mbew-peinh = '1000' .
endmethod.
However, SAP still store '1000' in database evenif we change the default value such as 100 when we use TCode MM01.
in additional, we still use MM02 to change the default value such as '100'
can anybody tell me how to do?
thanks
Henry

How to delete MRP view data after create in Material master data ?

Hi all ,
After user create a useless MRP view data in Material master data , how to remove it ?

Hi
Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
Give the necessary data that is needed for the view you want to delete.
Press and flag the view you want to delete.
Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
regards
Anand

Uploading picture to the material master data

Hi friends,
I searched the forum about this subject, however there are mostly answers related to retail sector.
I'd like to learn if ECC 6.0 could only itself is able to this. I mean is ECC 6.0 enough to add pictures to material master data or is there any configuration or customization requirement for that?
Thanks in advance.
Best regards,
Yusuf Gezer

yes, it is possible to store images to the materials. here you have at least 2 options, DMS and GOS.
DMS is document manament system, here it is even possible to classify the images for a better search. GOS is generic object services which is available in the maintenace transactions for material master and several other objects. Pretty easy to use, but....you cannot search for the images, you always have to go into the material and fom there you have to open the GOS to see whether an image exists or not.
further you should think about the place where you store these images and other attachments, I mean in SAP table system or in an optical disc system linked to SAP, which is much cheaper diskspace than the SAP tablespace.
A migration from DMS to DMS is relatively easy and can be accomplished with IDOCs via LSWM or ALE scenario.
Migration of GOS attachements is challenging. Nothing ready for use exists in SAP to do it.

Copy Material Master data - cannot copy "Proportion/Prod.Unit" view

Similar Messages

Maybe you are looking for