Copy, Move, or XML import drops non 1080p clips with no warning

What are the limitations on moving, copying, or exporting/importing XML?
It seems that FCPX dropped all my clips that are not 1080p. And to make matters worse, FCPX went through the motions like it was moving/importing, but ignored the clips that were not 1080p and gave me no warning.  So I worked on the project for 2 days only to discover that part of the clips were missing.
Has anyone else found this problem or do I have a configuration problem.
I have some Gopro video and timelapse that are large frame sizes, 2.7k and whatever the medium timelapse stills were set to.  These are the problems.
This seems to work with XML on the same computer, but when moving to a second computer is were the problem comes in.  The move/copy either events or clips dropped all my odd sized video clips, even on the same computer.  Again no warning.
You can import the original clips but not copy, move, or export/import XML to another computer.  I thought XML export was the recommended way of working in a distributed enviornment with FCPX 10.1?
Configuration:
2 computers
both OSX 10.9.2
both FCPX 10.1.1
all media is external to the libraray, so it needs to be re-linked when moved.
It does appear that if I copy the library to the other computer that everything is OK, but not with XML.
Should export/import XML work with non-standard frame sizes?  It would seem that if you can import the original clip, that you should be able to copy, move, export/import XML.
Rick

Thank Louis for the reply.
My problem is not the media, but clip instances.  I have the media on both computers.  For some reason the unlinked images are not loading accept for the 1080p.  When the clips show up, I can re-link them without problems.
I re-ran the XML import/export between computers, doing a complete round trip.  This time it worked!  I apparently am having a repeatability probelm, so I have some more work to do.
However when I did a Copy event to Library command, only the 1080p clips appeared.
Any suggestions on how to make this more repeatable?  Like emptying a cache or something.
BTW  the clips that were dropped are 2704x1524 - would that make any difference?
Rick

Similar Messages

  • Fox digital copy movie won't import into Itunes.

    I have Itunes version 11.0.2 and I am trying to import a Fox digital copy of a movie into Itunes, however every time I double click to import I receive the error message that it "requires Itunes version 7.6.2 or newer" and requests that I update Itunes.  Is there a way to import using digital copy (I own the disk and have the serial number for transfer) or is the only way to do this to rip the dvd the old fashioned way?  I wanted to use digital copy for convenience but, if it won't work I can use the other method.

    Ah, found out that I should not use the pop up window from the disc.  Instead, opened Itunes, selected the movie disc, entered the code to redeem and then it copied the movie.

  • XML import for repetition, is repitition with this structure possible

    If it is possible, what does the XML and or template structure have to look like, in order to support repeating sections of
    1. Chapter name (as a text)
    2. Table
    1. Chapter name
    2. Table
    1. Chapter name
    2. Table
    and so on...
    Everything should be inside a text frame, in order to let the paragraph style of "Chapter name" always begin a new page. The text container is mapped to the xml element called "grp" in the example below.
    I've imported in numerous ways with varying degrees of correctness, so if there is anyone that knows what I mean and how to tackle the problem, I would be very glad. I can work around the XML and the document in almost any way...
    I only get it to work if there are sufficient number of chapternames and tables put out on the body page from start. I would like InDesign to create copies of the "template"...
    But having just one "template" out on the body page, I get a result like this in the structure (and just the first one is mapped to the body page template, as you can see – the rest of them being empty unmapped XML brackets):
    Thanks,
    Andreas

    I made a layout on the first body page, and then I imported into that.
    Err, you mean a text frame, not a layout, right? OK, I haven't played with it that way, I'll take a look at it tomorrow (might be a while) -- if no one else ha solved it first.
    (The tables are not visible in the structure, howcome?)
    I believe that once a table is converted from an XML table into an InDesign table, it is no longer visible as a distinct XML object, just like two letters in a word are not visible in the structure. (I could be wrong on this).
    Yes, I used CALS tables. Why? Because it was the default. I made a layout like you described and exported it to XML, cleaned up the XML,
    and reimported it for my test. CALS was the default checkbox, so I went with it. I don't think it has naything to do with the structure question.
    I didn't use cals tables in my own XML file, but ordinary ones, mapped by column.
    Aren't those more annoying to use?
    Anyhow:
    ... but the repetition doing it my way does not work – as it does in your sample (and for me too, trying it), dragging the structure out onto the page.
    So, is dragging it a good solution for you? Is your problem solved? Or does that not meet your needs?

  • Importing video as one clip

    I edit items on a PC in Avid, an excellent professional editing system, mastering to DV tape. I've worked on Avid since 1998 and unfortunately worked in a PC environment for too long. I wanted to use iMovie to compress those movies to Quicktime to make use of Apple's excellent dvd authoring program by importing my master video which is on DV tape. My PC does a lousy job of compressing to Quicktime (it takes forever) and Apple's dvd authoring is excellent. Unfortunately the way iMovie works now makes it almost impossible to do this. Earlier versions of iMovie, specifically 6, allowed import of video material as one clip no matter how many shots and/or effects were in the footage. Now version 8, which I have, divides and rearranges those clips sporadically. Clips with dissolves or other effects are taken completely out of sequence and deposited at the end of the movie sequence. The other video is broken into unjoined clips for no apparent reason. I have unchecked the box arranging clips by date. It is nearly impossible to rearrange the clips for a smooth flow. This is all very unfortunate. Apple has effectively reduced the flexibility of version 8 from version 6. I can't understand why they would do this. It seems to be a step backward for iMovie and Apple and very disappointing. I'd love to see an update to fix this. Has anyone found a way to import video as one clip with no breaks in version 8?

    I didn't realize it was still available. I've done that and it should work. Thanks.

  • DV tape imported as one long clip

    I am importing all my DV tapes via my Sony DV camera to archive them. Most tapes are being split into clips correctly (with correct dates) but some tapes are imported as one long clip with the current date. Why are they one long clip and why is the date the current date (I assume these issues are related)?

    Not sure this is related but I had the same problem when I was importing from my Sony HDRSR5 hard drive camera.
    Went back and re-imported and it worked fine.
    Then on my Sony HVR-A1 I had one event split into 2 different dates.
    Never had a problem with iM6
    I wonder if it has to do with how slow the input feed is.
    I noticed on this tape the feed lagged by several minutes.

  • HT1751 Hi I followed the istructions to copy/move iTunes music to a new PC, can see albums listed in Library, but SYNCH does not put any music on iPod. It took me three weeks to import my CDs into iTunes and i DON'T want to do it again! Can anyone help ?

    Hi I followed instructions to copy/move iTunes music to a new PC. I can see albums listed in the library but SYNCH will not put any music on my new iPod.
    It took three weeks to import my CDs on the old PC and I don't want to do it again!
    Can anyone help ?

    Take a look here; it should help:
    iTunes for Mac: How to copy purchases between authorized computers
    Though it refers to items purchased from the iTunes Store, it applies to all your iTunes content. And if you happen to also own an iPod:
    How to use your iPod to move your music to a new computer
    Once you have the tracks on some removable medium, you can mount that on your new computer and then just drag the content to the iTunes window. Make sure that the option to "copy files to iTunes Music folder when adding to library" is set in the iTunes -> Advanced -> General preferences before you do. Alternatively, you can use the Add To Library command and select each track (or folder of tracks).
    If you won't be using that Windows system once you move the content, don't forget to deauthorize the system from your iTunes Store account before you dispose of the computer.
    Regards.
    Message was edited by: Dave Sawyer

  • Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again.  re-recorded 3 times and still not accepting HELP

    Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

    After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you. 
    The no longer plan to support editing of recordings made with their software.  So, we are planning to find a new meeting provider.

  • How do you import a non iphoto pic into imovie?

    There seems to be no way of getting a photo into iMovie except by placing it in iPhoto first. This is cumbersome if all your doing is pulling something from a drive.
    There is no File, Import like there is for movies.
    If you drag and drop the photo from finder into the project pane, things do not work as expected (for example, the context menu will not come up when dropped on a clip for green screen).
    Any ideas?
    bob

    Hi,
    I am having the same problem. The video I took appears as a .MOV file and nothing seems strange about it (plays in iTunes and iPhoto). I tried copying it to the desktop and importing, and that says nothing to import. It also does not appear in the iPhoto Movie browser in iMovie. Is there some sort of security setting that wouldn't allow an iChat video clip to appear in iMovie?
    I am using iChat 5.0.3 (745) and iMovie 8.0.6 (821).
    Regards,
    Keith
    Message was edited by: altbeast1

  • Elements 12 "Copy/Move to Removable Drive"

    Reference case # 185684196, phone support given last year, the problem persists.  In Elements 12, on my desktop PC (Windows 7, 64 bit) - I import photo files into the organizer, from camera card (RAW files, Nikon), THEN use the "Copy/Move to Removable Drive" function to move these files to a external hard drive (RAID 1 configuration) for permanent storage.  When I run this process, it initially moves the files to the destination drive -- then a dialogue asks (approximately):  are you sure you want to delete these files? (from the desktop drive) -- I click "yes" -- a progress bar runs -- and near completion, the process fails "Elements Organizer - An error occurred while reading files or writing files to disc.  The disc may be full or there may be a problem with the source media."  In fact, there is a great amount of disc space available at the destination drive.  My wife and I use (for many years) this program for semi-professional purpose.  It is CRITICAL to avoid any corruption -- the indexing / connection between the organizer thumbnail reference images and the externally stored image files MUST be properly maintained.  What is causing this error message, what must be done to resolve the issue?  I couple of times, when this has occurred, I went to the storage drive, manually deleted the just-imported files, ran the process again -- and, on this 2nd attempt, the process completed successfully.  Obviously, this is not a long-term solution, nor a proper procedure -- and I always worry some sort of corruption may be introduced -- so, please advise the correct solution.  Also -- I have been advised, and do practice, not allowing the catalogue to grow beyond 5,000 images (I then start a new catalogue).  With the current, large batch of photos I'm importing (over 300 images), I'm also getting an "advice" message to back up the catalogue -- something I think I will do, to a different external drive, to have redundancy beyond even the present RAID 1 storage - however, this in no way solves the problem I'm asking you to help

    I don't know how you managed to write in such a tiny font, but I managed to read your post and here is my take about your problems.
    1 - What's the purpose of uploading from your card to your internal drive and not directly in your external NAS drive, since you don't keep them on your internal drive? You can use Windows to copy from your card to the NAS. You can even set the default location where the photo downloader in the Organizer sends your pictures. I don't have a NAS, but that works perfectly on an external USB drive.
    2 - Reminder: the Organizer does not store picture files, only links to their real location (drive and path, that can be on an external drive). The catalog itself by default is on your boot drive, but it can be used on an external drive (not on a NAS for Macs).
    3 - If you want to move files from your internal drive to the external one, you can simply use the drag and drop method in the left Folders panel. You can also 'export' selected files in the organizer to another drive.
    4 - The advice to limit the catalog size to 5,000 items and split catalogs is stupid. There are happy users of 100,000 pictures, and splitting catalogs only creates organizing problems without any real advantage.
    5 - About storing catalogs and photos on a network drive: http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Storing_the_catalog
    6 - What about your backup procedures? Do you use the built-in backup/restore feature in Elements? If you use another external backup, how do you backup catalogs?
    Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)

  • Trouble opening mpeg movie files and importing into iMovie 08

    Hi, I'd be most grateful if anyone could provide any solutions to the following problem...
    A friend has emailed me two .mpeg movie files which are parts 1&2 of a home movie which I want to edit in iMovie and burn to DVD. The footage was shot on a miniHDV camcorder (not sure which brand).
    Opening in QT 7.6 gives the following warning dialogue: "The movie could not be opened. The file is not a movie file."
    The files will however play fine in VLC Media Player, but not in mpeg Streamclip (the file appears to play but the viewer is blank with no audio/video). Trying to import into iMovie is unsuccessful. The iMovie browser won't let me choose the files or drag/drop.
    Any ideas. I read somewhere that iMovie 08 can't import mpeg-1 files. Do I need to convert the files, and if so how?
    Thanks in advance, and apologies - this is my first experience of video editing.

    I have QT Player but it hasn't "kicked in" when I try to import my videos.
    Something called PIXE VRF Browser is supposed to help in the conversion. The QT MPEG-2 thingy won't install until I buy QT Pro, according to what I get on the screen.
    Sounds like you have too many applications trying to do the same thing. Either use the Pixela Pixe VRF Browser or use the Mac applications (Mac OS Finder, Apple QT MPEG-2 Playback Component w/MPEG Streamclip) but not both to do the same job. The Apple Finder should be able to copy multiplexed VOB/MPEG-2 files from either your PC burned DVD or directly from your camcorder DVD to your MAC hard drive where MPEG Streamclip/QT MPEG-2 component can convert them for use in iMovie '08. Frankly, I don't understand your work work flow or why you want to import your files to a GOP editor in the first place if your goal is to do frame level editing in iMovie '08.
    As for Jon's suggestion, I am on dial-up and cannot download big files at 3-4 Kbps snail pace.
    What does this have to do with importing your camcorder files to your PC and re-burning them to DVD for use on your Mac? If I were to make a recommendation here, it would have been to use an external hard drive here rather than DVDs for transporting files between platforms and then only if you want the files available to both. If your goal is only to edit them in iMovie '08 or iMovie HD on your Mac, then why not cut out the "middleman" platform?
    I wish I could purchase these updates on DVDs but the genies couldn't even tell me if there's such a service.
    Totally confused here. Are you saying your DVR-D300 files were commercial produced or that you are dealing with torrent downloads of copy-written material? These are two separate issues with facets beyond the scope of this forum.
    As for "platform", I have iMovie08. iMac does not read the mini RAM disks when I connect the camera to a USB port.
    Are you saying the Finder doesn't read them or that iMovie '08 doesn't read them? Do you "finalize" your DVDs before trying to read them via USB as the manual states may be necessary as indicated on page 150 of your manual?
    How can I find out that iMovie09 will let me import and edit my Panasonic videos?
    You could try going to the Apple site and checking the the tapeless camcorder compatibility chart. The Panasonic DVR-D300 is specifically listed along with a hot link for additional information. However, this still won't help you you don't finalize the content.

  • Insane XML Import, Huge Project, Duplicate file names work around...

    I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
    Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
    This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
    Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
    So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
    FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
    Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
    This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
    So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
    Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
    Sorry for the long confusing post....

    I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
    Kenn

  • Is a copy of .xml file on the iPod too? If so, how can I copy ONLY the .xml file to my computer and NOT have to copy all my music files too?

    I had to re-load my OS (Windows XP Pro) from a HD snapshot via Acronis True Image Server. I save my OS on my C: drive and all my data files on my D: drive.  So when I re-loaded my OS, I still have all of my music files intact.
    I have re-loaded the OS before and had to re-create iTunes library which I did by doing the follwing:
    1. cut & paste .xml file in iTunes folder to desktop
    2. delete .itl file in iTunes folder
    3. import .xml file through iTunes  file>library>iport playlist
    4. navigate to .xml file on desktop and import
    This worked last time I re-loaded my OS but not this time for some reason.
    So I'm wondering if there is a copy of the .xml file on the iPod itself in the iPod_Control folder that I can copy and paste to my comuter desktop and import via the above steps?
    I have seen all kinds of solutions on the web that include copying the music files from the iPod to the computer.  I don't need to do that.  I have the music files.  I just need the .xml file so iTunes can talk to my iPod (5th Generation - 30G).

    Backup your music library, that is the only way to ensure it does not go missing through theft, damage, operator error, machine breaks, upgrades go wrong, operator goes wrong .........

  • Layout Problem in XML Import

    Dear All,
    I am new in InDesign. I have some problem. I am using InDesign CS3. I want when XML file will be import layout should be come according to our specification with image. Is it possible any script or XSLT. If yes please give me some guiduence.
    I have done XML to Tagged Text using XSLT. But i want to go through XML Import options.
    Anyone please help me...
    Thanks and Regards,
    Byomokesh

    If possible, purchase a copy of A Designer's Guide to Adobe InDesign and XML: Harness the Power of XML to Automate your Print and Web Workflows.
    This book will answer most questions you might have about using XML with InDesign.
    For a short answer, you need to first create styles, then map them to the tags, then import the XML. I will send you an example via email (the author emailed me directly).
    Best regards,
    Tad

  • InDesign CS3 Scripting XML Import Multiple Images into same Text Frame

    I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out like how Microsoft Word handles inline images, i.e., laying out next image to the right of previsous image in the same line and if there is not enough space left in the line, then wrap to next line. Thanks in advance. I understand I could use JavaScript to do post import processing, e.g, calculate the image size and place each images accordingly. But I am trying to see whether there is a way to do this without scripts.

    You can apply an object style to all anchored images by script. A text frame containing main flow should be selected.
    var doc = app.activeDocument;
    var textFrame =  app.selection[0];
    var rectangles = textFrame.texts[0].rectangles;
    if (rectangles.length > 0) {
         for (var i=0; i < rectangles.length; i++) {
              rectangles[i].appliedObjectStyle = doc.objectStyles.item("Cover");
    However, there is a better approach:
    Step 1
    Create place holders for a single "Book" element and format it as needed -- apply an object style to the cover.
    Step 2
    Import the xml file -- the placeholders are replaced with data from the 1st xml element
    Step 3
    Drag & drop the element containing all "Books" elements into the main flow -- all elements are placed and formatted the same way as in step 1.
    Finally, add a new page, click the overset text icon and autoflow text to add pages so that to fit all the text.
    Hope this helps.
    Kasyan

  • Using XML Import/Export in Transport Connection

    Hi, I was investigating the feasibility of copying a query definition from one BW system to another using the XML Import/Export functionality in Transport Connection.  This is not to replace our current transport process across the landscape (Dev -> QA -> Prod), but merely just looking at possibilities for end users who develop queries in QA & then recreate them in Prod.
    My question is: has anyone worked with the XML Export/Import for types Queries & Query Elements?  I was trying this out between a Dev and Sandbox system and only had limited success.  I was able to take a small query and perform the Export to a local .xml file without much difficulty.  But when I try to do the Import, my query never shows up.  The Import function shows a green light, but I get a couple of error messages on the Import such as the following:
    ==========================================================
    SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ () cannot be imported
    Diagnosis
    You attempted to import SAP object 3WROG4HZ3NKP1PIYHCR1H24CQ of type into the system via the XMI interface. However, you are not allowed to import SAP objects.
    System response
    The object was ignored during the import.
    Note: It can be that the import is incomplete when the required SAP objects are still not active in the system.
    Procedure
    Install the specified objects from Business Content. Only import the metadata afterwards.
    =========================================================
    The portion returned for Saving and Activating returns green lights.  The two sample objects mentioned appear to just be custom InfoObjects used in my query & don't look to be any different than others that work OK. 
    Just curious if anyone else has worked with this and could help advise. 
    Thanks...  Jody

    This is an old subject, but I think XML import only works for datamodeling objects like InfoObjects, InfoCubes, and ODS objects. If you try to export a query, and open the XML file in a text editor, there is not enough information (in my opinion) to build the query. As an example you don't see how key figures are to be displayed, filter or free characteristics.
    However, when an InfoObject is collected, you get all the attributes, texts in all languages.
    If anyone has more insight, please enlighten us.
    -John

Maybe you are looking for

  • About sender jdbc adapter

    can I define multiple query statments in sender jdbc adapter? because i wanna get multiple recordsets from database according to multiple querty statements. like: <recordset1>       <row>               <col1>              <col1/>              <col2>

  • Getting TreePath for all nodes in a JTree

    Hi everybody I want to get TreePath for all the nodes in a JTree Can anybody help me?

  • AP Layers (divs)...

    Hi, I'm just getting comfortable with the concept of using DIVS vs. tables. I just watched a tutorial on YouTube in which a developer used AP Layers to create all his div tags, in DW CS3. (absolute placement layers) I'd like to know what you think of

  • Cannot uninstall QT not matter what I try.

    Hi all, I was having video issues with my XP Pro SP2 machine and I tried to uninstall iTunes and QT, but QT will NOT uninstall. iTunes Uninstalled, but when try to uninstall QT, it searches the drives and goes back to the window where you click "unin

  • Ability to do search of every word versus just tagged words

    Is there a way to setup my site so a user can search across my whole site for every word or is a search limited to just what is tagged?