Copy multiple phone numbers in a cell to individual cells

I have 2 large spread sheets that have phone number information enterd in a cell in a word wrap fashion. In other words they are all in one cell pertaining to the store the row contains data for. some of the lines have notes. Here is an exaple of the data
xxx-xxx-xxxx - Lead 1
xxx-xxx-xxxx - Lead 2
xxx-xxx-xxxx - Lead 2.
xxx-xxx-xxxx - Lead 1 - FAX
There are no spaces between the lines in the spread sheet.
Is there a way to automate copying the numbers to invidual cells?
I have to move the to cells to convert the data to a database. I started copying and pasting but was wondering if there is an easier way. I don't know VBS. If there isn't i'll jeep on with the ctrl-c - ctrl v.
This topic first appeared in the Spiceworks Community

Similar Messages

Can I attach multiple phone numbers to my iMessage account?

So here's my predicament:
Any time I go travelling somewhere, I like to buy a local SIM card so that I don't have to pay fees for roaming data. The problem is that whenever I insert a new SIM card, iMessage switches to using my new (temporary) number and disconnects from my old (permanent) number. So any new messages I send will either send from this foreign number, or from my email; either one is inconvenient because it tends to start new threads for others in group messages and such. And people who try to iMessage my permanent phone number end up having it fail and then send it as a text message (which I will not receive until I get home and switch my SIM card back).
Is it possible to have multiple phone numbers connected to an iMessage account? (Without resorting to something drastic like buying more iPhones just to have more active numbers.) It seems like something that should be possible, but I can't figure out how to do it.

No, it isn't possible. But you can give Apple this suggestion here: http://www.apple.com/feedback/iphone.html.

Upload vendor master with multiple phone numbers through LSMW

Hi,
I am trying to upload vendor master data with multiple telephone numbers. I am using BAPI BUS4001 , method SAVEREPLICA . It has allow me add only phone number. Is there any workout to short out this issue?
Thanks in advance.
Regrads,
Suresh Yerra.

Dear All,
the telephone structure in bapi is a table. so append each telephone record to the table for multiple phone numbers.
Thanks,
Suresh Yerra

Multiple Phone numbers for Multiple addresses

Hi Folks,
We have a requirement to build a solution for the following :
Every Business partner may have multiple addresses, and each address may have multiple phone numbers !!
We already have a qualified lookup table to house the multiple addresses but we are stuck at accomdating multiple phone number to each of the addresses !!
Any smart ideas !!?
Regards,
Vinay

Hi Vinay,
I got your point .But I guess you are talking about a lookUp Qualified inside a lookup Qualified table which I believe is not possible.But u can nest a lookup Flat table inside a qualified Table.
To your problem I have a different solution.
Let suppose Master record is as shown below:
Id | Name | Home_Add | Business_ADD | Landline | Mobile.
1 | abc | 123 | - | 078821 | 93709.
1 | abc | - | 345 | 080145 | 98932.
Here customer 'abc' have Multiple address like Home address and Business address.And each address has multiple phone numbers like Landline and Mobile.
In this case if you design repository as;
Main Table: ID,Name,Addres_Type
where Address_Type is a LookUp Quaified Field (multivalued)
Qualified Table:Address Type(Non-Qualifier),Landline(Qualifier)and Mobile(Qualifier),Address(Qualifier).
Address Type is a Flat LookUp Table with values Home address and Business Address.
After You Import in Data Manger your record will look like:
Id | Name | Address Type
1 | abc |Home Address;Business Address.
and when you see in Record detail pane for Address Type
you will find values like
Address Type: Home Address.
Landline : 078821
Mobile : 93709.
Address :123
Address Type: Business Address.
Landline : 080145
Mobile : 98932
Address :345
Hope this will help to solve your problem.If any further qury then do post to me.
Reward points if helpful.
Regards,
Neethu.

On a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.

on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.

Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
KOT

Help with multiple contacts with multiple phone numbers

I'm fairly new to the iPhone so thanks in advance for any help with this issue.
I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number. Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number.
I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens), the ringtone I created for that name & number helpfully lets me know who & where their calling from. It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time, but if their calling from work then I need to get back to them quickly.
This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time. My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone. Am I missing something here? I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
Thanks in advance.
Al

https://discussions.apple.com/message/18271382#18271382

How do I get rid of multiple phone numbers listed in iMessage and Facetime?

I just upgraded to the iPhone 5 and also upgraded my husband to the iPhone 4. I had originally activated his phone under my Apple ID but have since gotten him his own Apple ID. The problem I am having is that I have both of our phone numbers listed under:
Settings>Messages>Send & Receive>You can be reached by iMessage at:
It then lists my number and his number. Does anybody know how to delete his number? He seems to be getting some of my messages and his number is also listed under my Facetime contact numbers.

basically, you have to backup your phone to your computer, restart it, and set up as a new one. then you can start fresh, but still keep all your data and contacts.

How do I add multiple phone numbers at once to a contact? Is there any software able to do this, which I can import to iCloud?

I have my email forwarded to my cell phone via message to [[email protected]].
I do this for the reason that having my emails fetched constantly is a heavy burden on the battery.
This works perfectly, except for the fact that the emails come from a different number every time.
The numbers change by 3 digits from 001-999. (1-210-100-###)
I can write these numbers easily using something like excel to write the consecutive numbers, and not have to write one by one, but I would like to import these easily to my contact under "Email" for several reasons.
1. SMS tone to be consistant
2. Easy identification
3. Easy deletion
4. Message grouping
There are probably more benefits, however I cannot think of any at this very moment.
I want to basically write them all in to the contact to make the identity seamless.
I've tried to do so with
-Gmail - one number entry at a time
-Editing the .abbu file using text editor - Cannot find the phone number location to copy and emulate
POSSIBLE SOLUTION
Editing the contact using excel - I downloaded "Addressbook2CSV Exporter" and managed to get the contact information in an editable form.
I got the contact info which looks like
[,Other","","","1210100001 ::: 1210100002","","","","","","","","Generic","","","","","","","","","","",]
MEANING, if I can manage to merge the 999 numbers into one line of text, and add them to the numbers separated by "{space}:::{space}"
then I have my solution right there. This may have turned from an iCloud question to an excel question.
Any suggestions will be greatly appreciated.

Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys.

How to copyi all phone contacts to SIM card

Hello, I'm using this really bad network on my blackberry and it's really hard getting any good data service off it. As you'd imagine I wanna change to a better network. I was hoping I could copy all my contacts (they're less than 150) onto the sim memory before changing SIM cards, any ideas how it's done on a blackberry q10 device?
Solved!
Go to Solution.

Hello,
Using the SIM as a method of contact list saving is not a good idea IMHO. The BB contact list is robust (multiple phone numbers per person) where the SIM address book is weak (one name and one number only). So, even if you accomplished it, you'd wind up with a mess -- John Smith on your BB has 3 phone numbers...once you use the SIM, he has 3 completely separate entries, one for each of those 3 numbers. Not good.
So, the question comes, what is your actual desire here? Do you wish to migrate your contact data to a different device? Is that other device a BB or something else? Do you have your contacts "in the cloud", so that you can use that as the medium for transfer? Do you have your BB synchronizing with Outlook via LINK? If so, then that could be your method.
More questions than answers, I fear...so we await your reply.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Just upgraded to iOS 7 and messages are showing up on multiple phones within our family. We all use the same iCloud account. I believe this happened the last time there was a major iOS upgrade but I can't remember what the fix was! Help!

The four members of my family just upgraded to iOS 7 last night. We now find that we are receiving each other's text messages. It's possible that during the installs, a few members may not have "unckecked" the multiple phone numbers they can be reached on. I know that I had to uncheck my husbands work mobile number and work email address as they came up as choices for contacting me. So now I am receiving some of my daughter's text messages on my phone - she's not impressed! My husband is receiving my texts etc... It's a mess! I appreciate any help anyone can offer!

I had this problem last night as well. Only my daughter upgraded to iOS7 and she had an old phone of mine. When she upgraded, the phone asked for my apple ID and then continued as normal. However, after the upgrade, any text message that I recieved, she also recieved. I am pretty sure my wife thought I was hammered when she started texting me and my daughter began answering her not having any clue what she was texting about. Anyway, this only occurred with texts from other family members, not from texts I received from friends who are obviously not on our account (we have Verizon BTW). To resolve this issue, and it isn't a short resolution.... there are two options... One, simply erase everyting on the phone.... I don't like iTunes 11, so we were unable to back up her phone. I made her go through her 600 photos, delete the ones she didn't want and email the ones she wanted to herself, and then we wiped the phone clean and rebooted it... go into Settings, General, Reset, Erase All Content and Settings. The second option, if you have iTunes 11 is to back up the phones one at a time, and then go into Settings, General, Reset, Erase All Content and Settings. Either of these options wipes the phone clean of all information, text contacts pictures etc and then you have to re-enter all of your individual information. When you do that, make sure that no one is on the same iTunes account. Theoretically, after you do this, you plug back into your computer and SYNC your phone from the last back-up. This resolved the problem for us. I don't know if there is an easier solution, be we tried logging in and out of our iTunes Accounts, turning the power on and off, and nothing changed. So, we had to go the more difficult route to avoid mass confusion with family texting.

HT204053 how do i remove phone numbers from my apple id

Have multiple phone numbers attached to one Apple ID and want to remove them.

See "Unlink a phone number" under "Additional Information" at the bottom of this article: http://support.apple.com/kb/HT5538.

The order of phone numbers changes in iphone

I list phone numbers in Contacts in the order that I want them to appear, but the oder changes once they are in the iphone. The contacts show up correctly on my computer and in Mobile Me but different on the iphone. I have the current OS on my phone.
For example, each person with multiple phone numbers there is usually an order of which number is best to reach that person. For some people the first place to try and reach them would be their mobile number, for business associates I might want to call them at work first before trying them at a different number.
Another example is my husband. I want our home phone on top, his regular mobile number listed next, and he has a back up mobile phone for emergencies. Annoyingly, the back up mobile number is what shows up on the iphone as his first phone number.
I've asked about this in my "One to One" appointments and they told me to check with Mobile Me. I checked the mobile me support and they say it has to be a iphone issue. I have had two different 3G iphones and both did this. I've tried to work around this by deleting the entire address book and then importing all fresh info and this doesn't help. It is also random, it is not consistently putting any particular group on top.
I would really appreciate a solution.
thanks

Before you sync your iPhone the next time, activate the option "sync addressbook" and "replace all Contacts on iPhone". The next sync will replace your contact info on your phone. From that point on all contact infos will be the same on your mac and and your phone. And changes or new infos will also be seen on both systems.
Hope this helps

Cant add multiple phone mumbers to one contact

I accidently deleted the "phone" field when trying to add a contact and cannot find a way to replace it. I now have only 1 field for phone numbers and can only change the title. The "add a field" option does not have the option to adding an additional phone number field. (for multiple phone numbers) Nor do I see an option to restore a deleted field. How can I correct this?

You'd have to do it in Outlook.

Issue with selecting or copying a phone no. in dialing or direct calling from websites

Dear All,
I remarked that in Z10 I cannot use in dialing screen neither copy/paste phone numbers nor calling direct from email or websites by selecting the phone no. and taping on it.
This seems to be a bit annoying when you try to make a call from web or inside the email text, because you do not have even the possibility to paste the copied number into the dialing screen.
Somebody knows if is possible to do it, as in the other phones ?
Thanks !

The dial pad does not allow you to paste a number. But within an email, text message, web site, BBM message, if its a valid phone number example 416-967-1111, it shows the number as blue, Just clik and hold it and a slider appears on the right(copy, call, send text message, View contact, share/NFC, share, ope in). If you just tap it, it will start to dial the number.

Employee Self Service Personal Information - Phone Numbers

Hi,
I am testing out HRSS Employee Self Service. As an employee I navigate to the Personal Information Page, and click Add in the Phone Number region. When I add a phone number, it defaults to the phone type of Home. I have no option to add different phone numbers of different phone types. I checked in the HRMS forms, and phone types are setup, and through the People: Enter and Maintain forms I am able to add multiple phone numbers with different phone types.
Why do I not have the option to add phone numbers of different phone types through the HRSS Employee Self Service Personal Information page?
Thank you for your help,
Suzanne

Thank you for your response. How do I add these?

Copy multiple phone numbers in a cell to individual cells

Similar Messages

Maybe you are looking for