Copy of a standard sapscritp to a Z

Hi;
I have this problem, in development mandant i´m trying to copy a standard sapscript to a Z.. F140_CASH-_DOC_01 to Z140_CASH_DOC_01.
i did this:
1) place the name Z140_CASH_DOC_01
2) click in Create
3) then FORM -> TAKE
4) place the name F140_CASH_DOC_01 and save and activate
then i chek the sapscript an get nothing.. only white page with no content...
I tried this too:
a copy of mandant of the sapscript F140_CASH_DOC_01 in the development mandant and get the Z sapscript but with no content...
What i´m doing wrong... thanks on advance

first of all copy the script from 000 to 140
Check all posts using search tab by giving input copy sapscript  in forum itself ,
All the best

Similar Messages

  • Runtime Error In copy Of SAP Standard Program

    How do people,
    I have copied a SAP standard program H99CWTR0 because I need to add an extra
    column output in the report. I have made a few chnages regarding the INCLUDES
    When I run the program I am getting the following runtime error:
    " The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
    in program "%_T01050" is different from the calling program .....
    My question is that it says the error in program "%_T01050"  !!
    But when I enter this in SE38 it says it doesn't exist !
    Any ideas???
    Andy

    Thanks mate for replying.
    I'll have a look at what you suggest
    Andy

  • Copy and edit standard smartform...

    In tcode VA03, there is a form for printing the header. I want to add additional data to that smartform not by editing the standard form. Instead, I should edit the copy of the standard form.

    Then go to transaction smartforms, enter the name of your smartform, and then click on the Copy button on top left.
    You need to then also amend your config to call your smartform. Plenty of posts/blogs on this.

  • Error on copy of SAP standard form F110_IN_AVIS

    Hi Gurus,
    I have copied a SAP standard form F110_IN_AVIS and only added the Logo,but now when I run it through transaction f110 it only shows the logo and the adress at the top ..It gives a error message "window DATACV , the element 505 (Data Control Voucher) is missing" and therefore the outpu is defective.
    Does anybody know what may cause this error??
    Edited by: Alvaro Tejada Galindo on Feb 27, 2008 5:24 PM

    HI dethee
    I am also using the F110_IN_AVIS for printing wire transfer transactions.
    It is giving the spools for the wire transfer and Payment summary also an error log.
    The error log displays that 
    *1) In F110_IN_AVIS, / WINDOW MAIN, the element 500 ( line items ) is missing.***
    **2) In F110_IN_AVIS, / WINDOW SUMMARY, the element 515 ( transfer form closing ) is missing.**
    **Then out put of relevant forms is defective.**Please let me know if you find solution for your query. Also let me know which T code is to see the SAP script Text and its contents.
    Thanks
    Nxm.nxm
    Edited by: nxm nxm on Apr 14, 2008 4:45 PM
    Edited by: nxm nxm on Apr 14, 2008 4:46 PM

  • How to update a copy of the Standard Hierarchy

    We created a copy of the Standard Hierarchy for 0CUST_SALES in BW.  How can we update this copy from the Standard Hierarchy LKDH?  We just realized the copy was not being updated on a regular basis like the Standard Hierarchy.  We already have reports using this copy and we want to update the copy so we don't have to change these reports.
    Can someone tell me how to do this?
    Thanks.
    Ryan

    Hi Dilek,
    Can you tell me how to do this?  When I create an infopackage on the datasource 0CUST_SALES_LKDH_HIER, the only hierarchy listed on the Hierarchy Selection tab is the Standard Hierarchy.  What do I need to do to get the hierarchy that I created as a copy of the Standard Hierarchy is also listed on the Hierarchy Selection tab?
    Thanks.
    Ryan

  • Can we copy the entire standard fact sheet and make it custom for extension BO

    Dear all,
    I have created an extension for account. Now i want to create the Factsheet including the data from xbo and want to remove some standard fields as well.
    but is it possible to copy or make the standard factsheet as template and we can make our own factsheet with addtional details?
    If yes plz suggets how , if no then if any can help me creating with How-To guide for factsheets!
    Thanks in advanced!
    Regards,
    Dhruvin

    Hi, Dhruvin,
         Can't you just add extended fields to the factsheet? In ByD, it is possible to add extended fields to factsheets.
         And for summy, sorry . I am working on ByD and have not even heard of a Summary button.
         In deed, there is almost always a preview button for master objects. The button can show overview (or summary) of a particular object.
         I can't go to the detail here. I am a little bit busy . I think you can find it in the studio documentation.
    Hope this helps.
    Regards,
    Fred

  • Error while activating the copy of the standard module

    Hi,
    I wanted to create a copy of the module material_read_all and so I copied the entire function group.
    Now when I am trying to activate it , I am getting syntax error saying that the field does not exist in the global declarations. When I double click on the field name it takes me to another modules of the same function group where the said field is an export parameter.
    I cross checked with the standard module and there also no explicit declaration is given. I also tried declaraing the variable again and then activating.But on doing it I got different results from both the modules for the same input and so I had to delete and create it again.
    The same thing is happening with other modules also which I am trying to copy.
    Can anyone please help me with this.
    For copying the function group I entered the main program name in se38 and clicked on copy. It then asked me to copy the modules so I just added 'Z' before the modules to make a duplicate copy.
    It is very very urgent.
    Thanks in advance
    Edited by: Alvaro Tejada Galindo on Apr 28, 2008 11:50 AM

    Hi,
    I have tried activating all the includes individually and then the main program. But still I am getting the errors. While activating the includes on checking for the syntax error it showed error but on clicking on activating it got activated. But same thing sis not working for the main program.
    I also tried with 'activate anyway' but even after that syntax errors are there with the field decalrations.

  • Copy and add standard report

    I have a request to add few column in the standard report (T-code F.19, program, RFWERE00), so i copy the program and proceed modification, when i check the code, it has error. I would like to know can I have any solution to add column into the report. Thanks!

    hi
    make changes in ur list_item table then u wll get the required output in ur tcod
    hey the ouptput is comging for me
    with Regards
    Rohan Shetty
    Edited by: Rohan Shetty on May 7, 2008 6:41 AM

  • Layout changed when copy and modify standard pz09 service

    Hi,
    We  have copied the standard PZ09 ITS service (HTML Template, TCode, program) to custom program. Done some changes in custom program and published the service to ITS. But when we test the custom service the the layout looks entirely different. how to get the standard PZ09 layout in custom service. we haven't done any change in html template.
    Thanks & Regards,
    Bala

    Hello Bala,
    Does your original PZ09 service have templates?  You will need those templates (and mimes) to have the same look and feel.  Therefore if your custom service is called ZPZ09 then your system should have a zpz09 directory of templates.  If not then that is the problem, you haven't copied (or published) the PZ09 templates.
    Edgar

  • How copy changes in standard infotype using scc1

    hi,
    i m enhancing standard infotype 0022 adding single field using pm01 .
    changes are showing in our development client in pa30 screen,
    but when i copy the request to other client changes are not reflecting in pa30 screen.
    i checked changed screen layout it is showing that additional field but it is not showing in pa30.
    pls help.
    regards,
    sudhir ghag.
    SAP ABAP HR Consultant.

    Hi ,
    Pls check the entry in V_T582A in 2 different clients.
    This must be missing in other client.
    Transport this table entry.
    Hope this will work.
    Thanks
    Partha.

  • After copied class from standard class program getting dump.?

    HI
    Expert
    I copied to a zclass from standard class (CL_SPROJECT_SOLAR_BASE_REPORT).. if calling program through zclass program getting dump, if calliing program through above standard class then it works fine...
    error is
    The function module interface allows you to specify only fields of particular type under i_so_report. The field "ME" specified different here......
    Note:- Totaly i copied from standard class and activated it also.. even i did not changed any code inside method .but facing this dump why..
    How to achieve this...pls help me out
    Thanks
    Susanta

    I did wt ever was there given solution but still not resolved pls help me ..thanks
    showing error
    Call Method XXXXX
    DATA: lo_grid TYPE REF TO CL_SPROJECT_SOLAR_BASE_REPORT.
    lo_grid = me.
      CALL FUNCTION 'SPROJECT_EVAL_SET_SELSCREEN'
        EXPORTING
          i_o_data_container     = a_o_data_container
          i_v_reptype            = global_reptype
          i_o_sa_report          = lo_grid
          i_v_category           = category
          i_o_data_cont_lnk_docu = a_o_data_cont_lnk_docu "MP 21.07.05
    syntax error - The type of "ME" cannot be converted to the type of "LO_GRID". ..why..? did i coded incoreclty or tell me where to define that data type...

  • Link copy SapScript with Standard program

    hi experts,
    I have copied one sapscript form from one standard script and copied print program from standard program....
    can u tell me how to link both of them (print program and form)and how to make changes in the form  and program  ?
    regards,
    rohit
    Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:11 PM

    Assigning Form and Driver proram to an Output type is as follows.
    1) Go to NACE transaction
    2) Select an Applicatin(V1-Sales,V2-Shipping,V3-Billing)
    3) Click on Outputtypes Button
    4) Comes to Change Mode
    5) Click on New Entries button
    6) Specify Output type,Form name and Program and Save it.
    Check these links
    /people/venkata.ramisetti/blog/2006/09/21/configuring-output-types-for-pdf-based-print-forms
    NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
    You should know the Application of a document first Like:
    for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
    so first select the Application type (ex: EF) for PO and press OUtput types
    then a list will come in that you should know the related output type for PO.
    in this case it is NEU,
    select that and click on the processing Routines button on the left side
    it will display the Medium, Driver Program and the Script form or smartform related to that document..
    All nace entries are stored in TNAPR table
    1. In simple words, it
    is used for printing documents eg. purchase order, sales order etc.
    2. eg.
    For company1, there is purchase order A,
    for company2, there is purchase order B,
    for purchasing organisation 3, there is purchase order C.
    Now, this type of MAPPING (which is totally dynamic and changeable)
    cannot be HARDCODED in the standard sap program.
    3. Hence, NACE,
    provides this facility to MAP
    as per users requirement.
    ie. We can determine the OUTPUT using NACE.
    Output means for eg. Printing of purchase order
    Determine means = dynamically detecting which output (PO eg)
    hence, it is also called OUTPUT DETERMINATION using NACE.
    Regards.

  • Looking for a copy of the standard ruleset for CC GRC 5.1

    Our Corporate Controlling office wants a SoD report for both our customized CC ruleset and the standard Virsa ruleset.  However, the consultants we used to implement did not keep the standard ruleset (or back it up).  Does anyone know where I can find the standard ruleset.

    It comes with installation. You can always download the installation from service marketplace and extract the ruleset out.
    Alpesh

  • Copy a program standard

    Hi experts  , a client of a friend of mine is asking her to create a program similar to transaction MM01 ( Create materials ) because this client wants theirs own set of Z tables with the same info manage for this tnx, is there a easy way to do this ? thank you very much for your ideas.

    This is a rubbish business requirement.
    A client shouldn't ask we want a copy of mm01 so we can use custom tables.
    The real requirement should explain the required functionality.
    Then with a consultant you can look at the options of realizing said functionality, which could be in SAP and could even be with custom tables, but could also be realized using something altogether differently.
    Tell your friend to retrieve the requirement which is now basically hidden by a custom report request.
    Kind regards, Rob Dielemans

  • How do I download a copy of CS4 Standard Edition?

    I purchased this software and registered it with adobe.
    I had to reinstall this software because we are upgrading to a new PC.
    When I open the box I find that Im missing Application Disc1. I tried doing the chat support and they basically told me that im SOL.
    Not sure what to do from here because we can move forward with out upgrade and we can't afford to buy CS5/6

    Hi there,
         You can go ahead and download the CS4 from this below link:
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Follow the instructions carefully before starting the download. Once you download, you can use the serial number which you have to activate it into full version.
    Regards,
    Jairaj

Maybe you are looking for