Copy of BCT Process Chain
Hello Guru Friends
Do you know how i can copy or edit the PC Business content to Z infoproviders or is necsary develop all the process chain ??????
Whit best regards
agt
hi agt,
in RSPC, choose the process chain you want to copy by double clicking it, then you will see it in the left frame. type 'copy' in the box where you type in the transaction code and press 'enter'.
normaly we will develop the process chain.
Similar Messages
-
How to copy a existing process chain
hi
i am a SAP BW learner.
i created a process chain for inital load and i want to create a process chain by copying first created process chain and tell me in what situation we delete the indexes of InfoCube.
Can any one provide me the solution to how can i copy the existing process chain and tell me in what situation we delete the indexes of InfoCube.
Thanks in Advance.Hi Kiran:
Thats correct, you can copy an existing process chain and you will get all the variants in it.
well, the best practice to manually do the INIT loads and let the delta loads be in process chain.
we delete indexes and re create them when we are loading an infocube and the reason is performance
Assign points if helpful
kalyan -
Urgent Issue - Copy DTP and Process Chains in New Client Instance
We have created new client Instance ( CLNT 510 ) based on our present client ( CLNT 500 ).
We have all the process changes, application components from source system CLNT 500 and data ( both for master and transaction data ) in place for the CLNT 500.
Now we need to use the CLNT 510 for our futher development. RFC connection has been established.
Just want to know, do we need to create all the Application component trasfer , Transformation, DTP , Infopackages , Process chains again for the CLNT 510 data.
please help.
Thanks and Kind Regards,
Pratap Gade.Hello Jr Roberto,
Hello Jr Roberto,
We have company implementing mutiple SAP Implementations in different countries.
Client for BW Dev is 400.
Source system for Client BWD :
ECC Client ERP Dev - 500 ( for Holland Implementation )
ECC Client EPR Dev - 510 ( for German Implementation - Instance of ECC 500)
We are completed with the Client 500 implementation.
We are starting the german implementation and they have created a intance of Holland ECC Dev client 500 for german implementation with german data.
Now they have setup 2 rfc connection in BWD 400.
Also finally when they move to QAS client they are going to integrate the data of the both countries into one client.
Presenlty I need to use ECC client 510 client for our german development.
We have around 40 SAP BI reports in our first implementation. and around 10 in our second implementation.
Just want to know, what are issues to be considered in loading master data ( will it overwrite the master data from the client 500, if i extract the master data from client 510 )...and all the other issues like can I copy all the process chains...etc from client ECC 500 to ECC 510, without creating all transformation, DTP , Infopackages to load all the master from client 510 again.
I need a broad understand on how to go about the development ...starting with Application Components transfer from source system Client 510 ....to report development. ( if possible using the already created objects....infopackages , DTP etc..)
your help would be really appricated Mr Roberto.
Thanks and Kind Regards,
Shekar. -
Hi,
Can we create a copy of a process chain? Like we can do for other objects (ODS/Cubes/Queries etc.).
If yes then how. And if no then why.
thanks ..In BI7.0,Copy option will be available in Menu -- Under Proces Chain Tab
After this create a new variant for the Copy Process Chain....Using Exchange Variant assign this to the Copy chain and activate it.
Similar in 3.5 also,but for Chain copy is done using Tcode --copy
And the remaining things are same....
Mohan -
I copied an existing process chain with a new name. The problem is that I'm not being able to change the variants for the start process. How do i do that ?
Hi Farhan,
Right click on your Start Process and say Exchange Variant.
Here you can create new.
Hope this helps.
Regards,
Ashish Goel
(Reward with points if this helps you) -
Error in Transporting Process Chains
Hi All,
I have a requirement of changing the object name of the Process Chain.
This I have achieved by copying the existing process chain and meeting the naming conventions of the process chain as per client requirement.
Now As both the process chain have the same start variant shows the error. Again I have solved the same by removing the start process of the original process chain and created a new start process for the original process chains. This now shows no error.
The problem is when I try to transport the copied process chains I am getting the error pop up message
"Edit objects separately since they belong to different original systems"
Kindly help how to transport the sameHi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde -
Process chains failing - There is no path from LOADING (ipak) to PSAPROCESS
Hello
In the load process type of my process chain I am loading till PSA.
I am using the process type - update from PSA for 3 ODSs and loading all of them to the cube. one of these three process types is finishing successfully. For rest of the two I get following errors:
1. There is no path from [IPAK name] to PSAPROCESS [variant name]
2. Variant doesnot contain a valid combination request/data target
For the two process types which are failing, the request is not being picked up from PSA. Can you please suggest what can be the reason and how to fix it?
Thanks & Regards
ShreyasHi Shreyas,
How is it going on today , is there any change or same thing happened?.
I hope you have followed the below steps for re activation and schedule.
1. Go to process chain maintain view and in the menu option
Process Chain --> "Remove from schedule".
2.Process Chain --> "Activate" .
3.Process Chain --> "Activate and schedule" ( Note: Don't do this step If it is immediate start )
If the above steps does not work may be you can do one more thing , that is copy the whole process chain in to new one and create a new start event .
I had seen this type of errors and after activate and schedule it went fine.
Hope this will help.
Cheers
Manju -
Hello Experts,
We have this challenge where we need to list down the Master list of all the process chains in our production system.
I need to track their frequency and the details of the schedule time.
Which would be the process where I can get these details. I would need the meta chains only.
We have many chains in the system.Pl advise
Thanks,
SanthoshHi Santhosh,
You can find meta chain list from RSPCCHAIN table, sort Process Chain (ID) field and you will get all dependent PCs in Process Variant Field.
For the start time thing, you can refer RSPCPROCESSLOG table. First copy data from Process Chain(ID) list from RSPCCHAIN table and paste it to Process Variant (Name) field of RSPCPROCESSLOG table. Also you can filter data here date wise.
Hope this helps!!!!
Thanks,
Bhavin Vyas -
Debug loop seconds in process chain
hi
we have an issue. our DTP process has failed in our process chain and the reason was that the transformations were inactive. So we have activated the transformations and have executed the DTP manually. Now when i go to log view of my process chain and enter REPAIR on our DTP Process it is asking for DEBUG LOOP ____ Seconds.
what does debug loop mean...
IS it the right way to restart our process chain by enterIng REPAIR DTP after the manula dtp load we have done by activation transformations
Can anyone suggest me what should the debug loop --- value I SHOULD GIVEHi Krishna,
As mentioned Debug Loop is use to debug a Process Chain....You have to Enter a wait time greater than 0 seconds. And then, activate the Process Chain....
Then Go to the menu option: Execution -> Execute Synchronous to Debugging........The debug screen will now pop-up.....
But in your case, I don't think it is required....Since you have alreday executed the DTP manually....
Now you just need to continue the rest of the chain....
To do this.....open the chain in the Design View ............In the top where we write the TCODE, there wrire "COPY"..........Enter.....
It will copy the original process Chain..........Give a technical name of the copied chain............
Remove all the Processes till that DTP........Including the Start process......
Create a new Start Process......connect it to the next step.......activate the chain and execute it..........then rest of the chains will get executed fine.......
I don't think that you will face the same issue in the next run of the Process Chain........
You can also use the FM : RSPC_PROCESS_FINISH......to continue the chain instead of copying...
For this you can check the Bog :
Restarting Processchains
Do as you wish....
Regards,
Debjani...... -
203 Invoice Process chain Issue
Greetings All!
We have been facing an issue where the standard 203 Invoice PC has become cleint dependent .The client which it is pointing is not even existing in BI system configs.Due to this we are not able to open this process chain for editing as well..We tried to delete this process chain and re-instaal from the Business content,but when we are trying that still teh issue of client dependency is coming.The ssyetem gives an error stating
"Chain 0ASA_P041 can only be edited in client 300"
The extended message also shows the follwoing
Object 0ASA_P041 (Process Chain) could not be collected for object ()
Message no. RSO296
Diagnosis
You have collected objects in the BI Metadata Repository. Associated objects for object of type have also been collected. Object 0ASA_P041 of type Process Chain was among these objects.
However, this object 0ASA_P041 of type Process Chain is not available in the metadata repository.
System Response
Object 0ASA_P041 of type Process Chain is ignored in further collections. The links for object of type are incomplete. This may result in you not being able to activate this object.
Procedure
If this error occurs while you are installing BI Content, an error may have occurred during the delivery. Inform SAP. In all other cases, check that the object has not been deleted by another user during collection, for example.
Please assist,this issue is existing in both Dev as well as Quality enviroment.
Kind Regards,
SurbhiHi Surbhi,
Not sure what might have caused this. Please also try posting the query in BI forums since they might have a better idea on this.
As a quick workaround you can try to create a copy of the process chain 0ASA_P041 and in the table OPMDM_TYPES for the entries INVOICE and C_INVOICE use this new process chain instead of 0ASA_P041. Then the data management UI will automatically pick the new process chain.
Thanks,
Divyesh -
Hi, we have recently made a copy of our BW Production system to our Quality system. The variants for the Process chains were not copied during the copy.Because of this, now whenever we try to execute a process chain in quality we keep getting the pop up screens repeatedly saying that the variants are not existing. We are hitting the enter key to avoid these pop up screens.
I would like to know how to get rid of this problem and schedule the process chains smoothly.
Thanks in advance..Hi
If you have necessary authorization, you can remove the current process chains without variants and again you can repeat the copying of all process chains from Prod to quality with all the variants....this will take a little bit of work but solve your problem one for all
Hope this helps
Assign points if useful
Cheers
N Ganesh -
Hi All,
I am trying to find out a way to change the technical name of my Process Chain. I didn't find any option for deletion too. Can any one of you advise on this. Thank You.Hello Troy,
I don't think you can change the technical name of a process chain. Copy the existing process chain into a new one and delete the old one.
Copy process chain
Transaction RSPC -> Double click on process chain-> type "COPY" in transaction area
Delete Process chain
Transaction RSPC -> Double click on process chain-> Shift-F2 ( or from menu -> Process chain -> Delete).
Regards,
Praveen -
Error while copying a process chain.
Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator -
Hi guys,
I am trying to copy a process chain but use different infopackages and ODS objects from the original one. Please how do i go about this? ThanksIn Rspc , select the PC you want to copy from , on the menu bar , select Process chain , and their select Copy. And more over , which BI version are you working on?? You have this option in 7.0 only I think, if you are on BI 3.5 , I dont think you can copy, the only option is you have to create a brand new one.
let me know. -
Copying Process chain in BW 3.5?
Hi All,
How do we copy a process chain in BW 3.5?
Thanks in Advance.Hi,
Open the chain which u want to copy and then in the Transaction code input box write copy and enter. this will give a pop up for Process chain and Process chain Variant give these name which u will provide will be the name of ur new Process chain.
Thanks,
Nagesh.
Maybe you are looking for
-
Report generation, Excel isn't closed in the Task manager (LV2010)
Hello everybody, I attached a simple example, to explain my problem. I tried (with Report generation) save data to Excel. That works fine. My problem is: in the Task Manager I can see the Excel.exe. Does anybody have a idea or a solution, why Excel d
-
After updating app's I notices that the"system update icon" is gone, how do I get it back, I've tried restarting, but no app Solved! Go to Solution.
-
I have several animation files that just came in as QT files for use in PPro 1.5. They play fine in QT Player,, but stutter when in PPro. None are larger than 450MB. I thought QT mov files were compatible with PPro. What am I missing here? I tri
-
I am told that the 5102 Card (PCI) does not support continuous streaming of data to the hard disk. My application requires only very low sampling rates. If I can do it with a low spec DAQ Card using LabView why can't I do it with this card?
-
11g Mediator - force empty soap envelope to be returned
Integration Diagram Exposed Service -> mediator (with transform and assign) -> Reference Service (Asynchronous one-way) I have set up an 11g mediator project. The reference service calls an asynchrounous one-way operation. The referenced service has