Copy of Inspection Result
Hi QM Gurus,
I have a very specific requirement.
If I do a goods receipt, an inspection lot (inspection origin 05) is created. (example: 05000000731 - GSM0123 - AA123456)
The results of this inspection lot can be read via an interface and the usage decision is made automatically.
I have created a delivery and a inspection lot is created. (inspection origin 06 - example Inspection Lot 10000019768 - GSM0123 - AA123456)
Now I want to copy the Results with validations from Inspection Lot 05000000731 - GSM0123 - AA123456 to Inspection Lot 10000019768 - GSM0123 - AA123456 automatically.
I do not want to select the inspection lot for copying. The system will find the inspection lot myself about Material GSM0123 and Batch AA123456.
In SPRO -> Make Settings for Copy of Inspection Results --> What setting do I need to make in the "Selection"?
"Recurring Inspection for Batch" - I think that is not correct
"Data from Inspection for Preliminary Product" - But the material GSM0123 is always the same material.
"Custom Selection of Inspection Lot" - I have to select the source inspection lot here. I do not want.
I have no idea to solve this requirement!
Can anyone help me?
Thanks,
Ulrike
Hi Do-Wook Kim,
I have copied the BAdI "QEC_SELECTION_300" to "ZQEC_SELECTION_300" (SE19).
In SPRO I've created a new selection on the "Business Add-In for Selection of Results Data for Copy of In".
In the dialog you can write an SelectionNumber with 3 Numbers:
I could not specify a name when creating the selection, I found strange, but okay.
After these steps I adapt the method "SELECTION".
Now it works. Thank you so much!
Ulrike
Similar Messages
-
Copy the inspection result from one lot to multiples lots!!
Hi SAP expert,
I want to copy the inspection result from one lot to multiples lots, currently i know how to setup the copy to another lot(SAML Response from SAP ID Service ) , but i dont know to do to multiples lot.
¿Someone can help me?
Thank youFirst you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P. -
Copying of Inspection results to another inspection lot automatically
Dear Guru
I need the results in the inspection lots to get copied to another inspection lot automatically.
Kindly let me knwo if u can do that and what are the possbilities.
thanks
Nithi AThis is standard SAP functionality. Please reveiw the help files:
http://help.sap.com/erp2005_ehp_01/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/frameset.htm
Craig -
Copy Inspection Results of one lot to other lots at a time
Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out -
SAP QM Result recording - Copy inspection results functionality
Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
ManoharHello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle -
QM: Copying inspection results to another lot
Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
RgdsHaving seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig -
Copy of inspection lot results from one to many batches
Dear All,
I have a batch managed material in sap & inspection lot is generated for all the batches. I want some of the values of inspection results to be copied from one lot to many
to save the result recording time since value entered in 5 to 6 batches are same. please note that product is common for three plants.
Or I have to do it through Z development.
ThanksFirst you have to customizing the functionality of Copy of Inspection Results using the following path, where you have to entry the inspection types, plant .etc., where you want to have the functionality.
SPRO -> Quality Management -> Quality Inspection -> Make Settings for Copy of Inspection Results
Then when you are in Record Result screen you select Menu -> Edit -> Copy Inspection Results ,
then a pop-up window is displayed and you filled in with the inspection lot which has the results and then another pop-up window is displayed to select the characteristics that you want to copy.
A.P. -
Hi All,
In result recording inspection results can be copied to the actual inspection lot from an existing lot. Is this possible, if so where we have to this customizing.
NavinHi,
Pl go thro the forum post and doc link below
Re: Copy Inspection Results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun -
Copying Inspection results from inspection lot.
Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar MokashiHi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM -
Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM -
Error during copying inspection result.
Hi All,
While recording result with the Inspection plan where I had done settings to copy inspection result from another lot I got the error message;;;;
Message Text
No active implementation exists for BAdI QEC_SELECTION, procedure
Technical Data
Message type__________ E (Error)
Message class_________ QECOPY (QM Data Transfer to an Inspection Lot)
Message number________ 016
Message variable 1____ QEC_SELECTION
Message variable 2____
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________ 1 (very important)
Sort criterion________
Number________________ 1
Pls guide me how do I activate this BADi
Regards,
Shyamal JoshiHI all,
I think I will not get any response over it so closing the thread to contribute in new rule of engagement.
Regards,
Shyamal -
Copy inspection results not working
Dear Gurus,
I made the settings required for copying inspection results and it is working on the QA server, but it is not working on the PROD server although I'm making the same settings. When I go to transaction QA32 and go for results recording in the required operation, I press "Edit" but I don't get the "Copy inspection results" choice.
Any ideas??
Regards,
MaXGo through following docs
http://help.sap.com/saphelp_dimp50/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Re: SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/guideline%20to%20copy%20inspection%20result%20from%20one%20lot%20to%20another.pdf -
Dear Friends ,
I have configured for Quality certificate.
At the time of delivery , the system will create an inspection lot.
To make delivery we need to carry out RR and UD once again.
Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection type 04 .
Thanks in advance.HI Dear,
As you said , it is for COA.
And the materials are not batch manged.
Is there any possibility of copying the results of 04 inspection lot to inspection type 10 lot , which is created at the time of PGI.
Because untill and unless RR and UD is made sales people will be not able to make the delivery . if there are multiple lots , it takes
time for them to carry out RR and UD.
Thanks for your reply!!! -
Dear Experts,
In the production server copying inspection results is possible with one user ID but with another user ID it is giving error. Please let me know if there is any particular related authorization object.
Regards
SunitDear what is the error description and error code or else you can check the missing authorization object by entering SU53 in error screen and check with basis guy.
Cheers
KK -
Inspection result to multiple batches
Hello,
For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
Anyone can help me out with this one?Hi,
That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
By the way which inspectin type are you using?
WR,
Sanjeev
Maybe you are looking for
-
How to create a group of servers where monitor runs of one of them
Hello, I have a group of Linux servers where I want to monitor some processes. Important is that the process have to run minimum 1 and maximum 1 time on server A or B or C. If I add my server group to the process monitor I got error events that the p
-
Nokia 701: where can I buy it from?
Hi everyone, I am trying to find this phone for a while now but can't especially the dark steel colour. Does any retailer sell these? Or a reliable online shop? Much appreciated, Faisal Solved! Go to Solution.
-
Flash Player 11 installation.
I upgraded to Flash Player 11 which installed correctly. However, a program that uses Flash Player said that I still need to install it. I reinstalled Flash Player again and restarted the computer. However, that did not help. What should I try ne
-
Creating a Queue to hold the message with in the program
Hi Iam creating a Queue(linked Queue or any other java Queue) with in my project.The main purpose is to check the acknowledgement message for a any message sent to the client(JMS QUEUE). Whenever a message is sent to MQ, it is also sent to the intern
-
As detailed in my question. I need help as my screen has been flickering or blanking out when I scroll my mouse or when I type. This has only started happening since the last 2 updates to Firefox.