Copy of invoice/receipt - Samsung Digital Camera

All,
My Samsung digital camera has broken and I need the invoice/receipt to be able to have Samsung to fix it here in Brazil.
Can you please help me with that?
Here is some information from my camera:
Brand - Samsung
Model - WB850F
S/N - {Removed per Forum Guidelines}
I bought this camera in Best Buy in Orlando, March 2013.
Thank you
Carlos

Hi Carlos,
Welcome to the Best Buy forum!
Before I can find your receipt and potentially provide a copy, I will need a bit more information about the actual transaction. I am going to send you a private message so that I can gather that information and see what I can do to help. You can check your private messages by logging into the forum and clicking on the yellow envelope icon located at the top of the page.
Warmest Regards,
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

I have a Samsung Digital camera that has WIFI how can I print pictures from my camera.ith this print

Printing Photos from WIFI camera

Hey Betp!
Sounds like you have a nice camera! Unfortunately, unless the camera has some kind of built in print driver, you wouldn't be able to print from it over Wi-fi. What you would most likely need to do is transfer the photos to your computer and then printer them, or remove the memory card and insert it directly into the printer (assuming it comes with that size slot).
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Copy multiple goods receipt PO's to A/P invoice

Hi,
Is there a way to copy multiple goods receipt PO's to an A/P invoice?
Thanks,
Jane

Yes, you can. You just need to go to add A/P invoice and click on Copy From button. Then select multiple GRPO to copy. However, you will be warned that only target FX rate can be used if you have BP currency instead of LC.
Thanks,
Gordon

Incompatability with Samsung Digimax 350SE digital camera

After my original G5 imac going to the wall within the warranty period - I was offered a new 17in Mac Intel as a replacement. I paid I traded in the extended warranty and paid a little bit extra and purchased the 20ins 2MB model. Unfortunately I did not know of any of the problems with them and after 3 months of **** with my G5 I was just so excited to have a mac that worked.
Then I tried to use my digital camera and in profiles the mac said it was there, but nothing appeared on the desktop, so I couldn't access any of my photos. So I contacted Apple who said I would need drivers for my new mac intel to see the camera (unfortunately Samsung don't have drivers for the mac). So my next option is to get a card reader that reads compact flash cards. I was considering the Lexar multi-card USB 2.0 card reader. However, I am a bit anxious that if I connect the usb cable I will have the same problem. Can anyone recommend a card reader that they know works with the new Imac Intel Core Duo?

I'll add the suggestion to try any, or all, of these that might help to play them properly:
VLC
Perian
Streamclip

IPhoto won't import video from a Samsung HZ15W digital camera.

iPhoto won't import video from a Samsung HZ15W digital camera. What's the easiest way to get the video imported. Also, didn't prior versions of iPhoto accept this format?

As you don't mention the version of iPhoto, I can only guess that you've been caught in the gap between Apple and Samsung. Somethign changed with iPhoto 11 and it's quite rigid about how timecode is handled in video and there's something not quite standard in the Samsung timecode. Google around a bit for more.
And, as Larry say, try iMovie
Regards
TD

Samsung WB250F Smart Digital Camera with Mac IOS

How compatible is the Samsung WB250F Smart Digital Camera with Mac IOS? Am thinking of buying one but not sure if they will work together. Our Samsung TV is not so don't want to waste my money.
thanks
dave

Edit error, it is not working at all, will not download any images, the words in my question "am doing it" is a typo!

No audio when files (recorded off of digital camera) were copied to iMovie

I attempted to import video clips taken with my sure shot digital camera to iMovie. The video transfered just fine but there is no audio.
I then uploaded all the video clips from the camera to iPhoto and when I opened those files thru iPhoto, quicktime plays the videos perfectly with audio.
What am I doing wrong/what do I need to do so that these video files play audio when in iMovie?

Hello 112969nole,
the clips from your digital camera are likely to be in a muxed MPEG format. In order to edit them with iMovie you'll need to convert them to DV format.
Find some more info in Dan Slagle's Unofficial iMovie FAQ:
1. Can't hear audio in iMovie when I import an MPEG clip
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
2. Mpeg clips from digital cameras
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
3. Using Mpeg (DVD) footage
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
and also Matti Haveri's website: How can I edit MPEG or convert DVD or MPEG to DV
http://www.sjoki.uta.fi/%7Eshmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
Tools:
MPEG StreamClip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
Apple MPEG2 PlayBack:
http://www.apple.com/quicktime/mpeg2/
DVDxDV
http://www.dvdxdv.com/
hope this helps
mish

Import from digital camera no longer works

iPhoto 6.0.6
I suddenly can't import photos from my Casio digital camera.
It worked fine two months ago, with the same computer and the same camera.
When I connect the camera to the computer, and turn the camera on, the camera appears on the Desktop, and iPhoto launches.
At this point iPhoto used to display an "Import" button.
But not anymore.
Now iPhoto just displays the photo library with the already imported photos.
No "Import" button.
To force the import I tried Shift-Command-I.
(I have never tried Shift-Command-I before, but I suppose it was worth a try)
Shift-Command-I gave me a directory dialog box.
In the directory dialog box I navigated to the camera, found the camera's subfolder with photos, and clicked "Import" in the directory dialog box.
iPhoto began to prepare for import, but crashed after five seconds.
Clicking on "Stop Import" had no effect, and I had to force quit.
I tried all the above several times, and got the same result every time.
Any ideas?
Peter Thomsen
iMac, 2.16 GHz Intel Core 2 Duo Mac OS X (10.4.10)

Try:
1- log into another account and try importing into a test library there (do no have iPhoto delete the files!).
2 - boot into Safe Mode and try in your primary account.
It you can't import in #3 and can in #2, a reinstall of iPhoto would seem to be mandated.If you do try a reinstall of iPhoto you'll have to delete the current application and all files with "iPhoto" in the file name that reside in the HD/Library/Receipts folder.
If you can't import in either #2 or 3, then a reapplication of the 10.4.10
COMBOupdater is suggested. Followed by a repair of disk permissions, of course.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

[solved] Digital Camera not recognized in device-manager

My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)

I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

Is it possible to upload photos directly from a digital camera to the Zen Sle

Hello
My girlfriend and I are going to South America. Therefore, I am not only looking for a MP3-player, but also a place to store photos. The Zen Sleek court my attention.
Though, I would like to know whether it is possible to upload photos directly from a digital camera to the Zen Sleek? Does it require any extra cables or software? Or is it only possible to store photos through a ordinary computer and then transfer photos to the harddisc on the Zen Sleek?
Regards
Mads Lyngby Petersen

Short answer, I've never seen anyone try it.
Long answer, it might be possible using one of these USB bridge devices. Some of these devices are supposed to be able to bridge between a camera and a USB mass storage device, and then deal with hosting the connection and moving/copying the files.
I would be intruiged to know if someone's managed it, but as mentioned so far I've not seen anyone mention it.

Copy to Goods Receipt PO function on Goods Return

In current version 2007A there is no Copy to Goods Receipt PO function on Goods Return document. There is only Copy to A/P Credit Memo. This list should contain all available target documents.

Yes, you can. You just need to go to add A/P invoice and click on Copy From button. Then select multiple GRPO to copy. However, you will be warned that only target FX rate can be used if you have BP currency instead of LC.
Thanks,
Gordon

IPod touch 4th Gen is recognized as digital camera, not in iTunes

I'm using a Windows XP computer with the newest version of iTunes and my iPod touch 4 won't pop up in iTunes, it's a digital camera according to my pc. I have tried really EVERYTHING: update iTunes, downgrade iTunes, reinstall iTunes and all other apple software 7 times, USB drivers, firmware, DFU-mode, every single apple support I could find I tried! And now I'm tired of it, my rage upon this issue isn't describable anymore...
Please help me instead of referring to another topic

Found the sollution, but it is very hard to do though:
"Unfortunatly uninstalling/re-installing iTunes and all doesn't always seem to work. We had the same issue with the ipod touch being recognized as a digital camera under windows xp. We tried just about any recipe listed by apple or others with no success.
In the end what works is to just force the drivers on what windows thinks is a camera, i.e. to ‘update’ the device to use the correct driver. There are some hints on how to do this already listed on this forum, but I’ll try to give some more detailed information:
1. First off you need to have iTunes installed and the ipod touch plugged in
and recognized as ‘something’ e.g. digital camera (it shouldn’t really
matter what it’s recognized as, but it needs to be found by windows).
2. Search for usbaapl in the C:\WINDOWS system folder:
o open windows explorer (e.g. Right-click Start and then click ‘explore’)
o right-click the WINDOWS folder and select ‘Search’).
o type in usbaapl and hit Search – try to ignore the dog!
You should find the driver info in a sub folder of
C:\WINDOWS\system32\DRVSTORE e.g. C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B
Remember that location (either leave the search box open or copy the folder
name into note pad – you’ll need it later)
If you don’t find usbaapl.sys, usbaapl.inf etc. then your drivers have not
been installed with the iTunes install and you’ll have to reinstall iTunes.
3. Locate the ipod-camera device:
o Open the device manager, e.g. using Start > Control Panel >
Performance and Maintenance > System > Hardware Tab > Device Manager
o Look for a device called ‘ipod’ - if your ipod shows up as
‘digital camera’ it will be under something like ‘imaging devices’.
4. Update the driver:
o Right click the ‘ipod-camera’ in device manager and click on
‘Update Driver’ – the Hardware Update Wizard will open.
o Check the ‘Install from a list or specific location’ then click ‘Next’
o Check ‘Search for the best driver in these locations’. Un-check
‘Search removable media’ and check ‘Include this location in the search’.
In the text box below type (or better copy and paste) the folder
containing the ipod driver information found in step 1 (in the example
above it was C:\WINDOWS\system32\DRVSTORE\usbaapl_A65621D65F5B7507DD7B22331826547BDD2D206B),
then click Next.
You should now see something like ‘Apple ipod device driver’ or so. Continue
installing that device. Once the driver has been installed the ipod will come
to life and iTunes (if you have it open) will show it.
Hope this helps. Please add comments to the instructions above if you find variations that work for you."
Apple should fix things like this!

TS1493 When I go to change the drive letter, I go through the entire process and when I click on disk management, my ipod is not listed. On my computer it is still listed as a digital camera

I have searched online and tried all the possibilities to fix the issues I am having but have sadly been unsuccessful. My ipod is being read as a digital camera, it is not reading on my itunes therefore I cannot sync any music or apps I have purchased. The only solution I couldn't try was to change my drive letter. Main reason being, my device did not show up under the disk management page.

If you have pictures (on your iPod) in the Camera Roll, that may be why the iPod is showing up as a camera. The Camera Roll is where pictures taken on the iPod, screenshots taken on the iPod and pictures saved from Safari are stored.
Copy the pictures from the Camera Roll and put them onto yuor computer. Once you have done that, you can delete the pictures from the Camera Roll and perhaps the iPod will stop showing up as a camera.
The iPod Touch does not have an accessible hard drive, so it will not show up under disk management.

PC Windows 7 is now showing iPod Touch (4th Gen) as a digital camera instead of music player

I somehow lost my entire iTunes library on my PC Windows 7 (64 bit) and need to restore it to my PC. When I try to copy the songs from my iPod Touch Version 4.1.2, it shows up as a digital camera device rather than a music player device and only gives photo box to type into. It also does not show up as ipod_control in the ipod drive folders. I followed all instructions but cannot accomplish anything. I also tried to follow instructions provided for the digital camera device to no avail. I have the most recent installed version of iTunes 12 and all my drivers are up to date. Can anyone help me resolve this problem? Thank you so much for your courtesy.

You need a third-party program as discussed here to get non-iTunes purchases from the iPod to a computer.
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Whats the right Digital Camera to show video Clips on my new iMac OS X Lion

Hi, Can anybody tell me what Type or Model of Digital Camera (with Video Clip Facility) to purchase succesfully down loading on to my brand new iMac OS X Lion?? I'm new to Apple iMac, found out that my 2 year old Samsung camera when downloading Photos and video clips, only shows the photos but not the video clips in my iPhoto folder. the clips are just shown in a black blank square!! Please HELP...Thank You

Christa,
Have you tried using iMovie for your video clips? If you aren't familiar with iMovie here is a link to the iMovie tutorials. I would think your current camera should be just fine.

Copy of invoice/receipt - Samsung Digital Camera

Similar Messages

Maybe you are looking for