Copy of MD07 transaction

Hello ,
  I have a program which is a copy of MD07 transaction  , while updating the program to ECC , we had to add new variables and subroutines as part of upgrade.
The program works well and gives the correct result , but when i try to exit the program , it gives an error SAP Workprocess restarted and exits the session.
This does not happend when i execute the standard transaction .
Any idea what can be the reason for this error and how to correct it.
Regards
Arun

Copy the transaction again. New version can have new changes. Then insert your modifications.
At this moment you have upgraded your transaction to ECC 6 and you shouldn't have problems

Similar Messages

  • Copy Control for Transaction Types

    Hi,
    Was wondering if someone could help on following topic. We need to specify the possibility of copy control (follow-up) for certain transaction types in CRM 6.0. I've specified the source TT (ZAPP) and the target TT (ZCON) in customizing activity : Define Copying Control for Transaction Types.
    ZAPP = Custom Appointment Activity
    ZCON = Custom Opportunity
    Now, when I want to create a follow-up for ZAPP in the WebUI (via dropdown 'More' and action 'Follow-Up'), I always get an extensive list of transaction types (about 30) rather than only the opportunity that I originally specified. Any ideas?
    Thank you,
    Sebastiaan.

    Hi Kai,
    Many thanks for your answer. Indeed, the COPY_DOCUMENT is a very good alternative as it also directs the flow for follow-up. However, I have a question in regards to using this method. I can see that there are parameters that need to be provided (like PROCESS_TYPE etc) but apart from that is it also possible to change fields in the copied document.
    e.g. Currently the description of the copied document gathers the description of the action definition, but how can you pass the description of the previous document for instance? Is this also done via the actual parameters?
    Thank you,
    Sebastiaan.

  • Copy of Business Transaction (CRM Service Request)

    Hi Forum,
    I created a transaction that uses the CRM Service Request as leading Transaction Category. I configured the IMG step "Copying Control for Business Transacation" in order to copy the transaction as a follow-up.
    The problem is that the transaction does not appear in the list when we choose the link  "create follow-up".
    Any idea ?
    Thanks a lot !!!

    1. Activate Copying Control of Activities
    CRM - Transactions - Settings for Activities - Activate Copying Control of Activities
    This will cause that only transactions defined in your Business Transaction Profile (which is assigned to your Business Role and defined in CRM - Interaction Center Webclient - Business Transaction - Define Business Transaction Profiles) are visible in dropdown list.
    2. Define Copying Control of Transaction Types
    CRM - Transactions - Basic Settings - Copying Control of Transaction Types - Define Copying Control of Transaction Types
    Here select Source Transaction and choose Target Transaction.
    Always follow CRM Best Practices documentation as all of the customizing steps are described there...
    Link - http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm

  • Copying standard report transaction selection screen

    Hi  everybody,
    How can we copy standard report transaction's VI05 selection screen to my custom report transaction's selection screen some zprogram . The problem is that when i am copying the selection screen into my programs screen, it is getting copied, but not as selection screen rather as normal screen. I have defined a transaction code for the same with the custom screen no as the selection screen but its giving a message that selection screen 9001 doesn't exist. However if i keep the selection screen as 1000 the screen in the standard transaction VI05 the transaction is executing fine.
    But again the problem was that although it seems that the screen 1000 of the standard program for VI05 has been copied to my custom program but its not showing in the object list of my custom program. so I cannot do any changes which i require.
    If anybody requires any clarification u can raise your doubts i will try to make it more clear.
    Can any body help me with this?
    Your help will be deeply appreciated.
    Thanks a lot!
    Best Wishes!
    Regards
    Prem

    Hi Prem,
    Even if the GUI Status is active, you cannot see two components of Standard Selection Screen.
    1. All Selections - Push Button
    2. Categories - Screen Block in the first with two options
         2.1. OI_STAND
         2.2. OI_BULK
    This is becoz, there are enhancement spots included in the Standard program and the enhancement spots will not be copied, unless you copy them manually.
    Check the same.
    Regards,
    -Syed.

  • Match code result not copied in the transaction

    Hi there,
    I had a request to check the following problem : in transaction VF02 (billing doc change), when finding a document through custom match code using the reference field, double clicking on the document in the result box does not copy the document number to the VF02 field. This is frustrating for the users...It seems that this behaviour is new.
    I understood this is controlled through a database view (in this case M_VMCFX). When I compare with a standard matchcode that doesn't give problem, I notice that there is no generated view info when I do F1+technical details with this match code, I have M_VMCFA for the standard match code...
    Any idea ?

    hi Philippe,
    Goto SE11, enter the custom match code in search help field, choosing search help radio button.
    Check the <b>EXP</b> check box is selected for the field under consideration.
    Hope this helps,
    Sajan Joseph.

  • Difference in amount(value) when i made copy of MB5B transaction

    Hi All
         I made copy (ZMB5B_COPY) of std.transaction MB5B (RM07MLBD) when i select STOCK TYPE-Valuated stock radio button &
    enter date (for eg.01.04.2013 to 01.04.2013) i get the amount of closeing value when i click for total it display the total value.but i
    get difference in value like in std tranaction i got 31 crore & in my ZMB5B program i am getting 3012 cr.
    First one showing o/p of my ZMB5B program (3012 Cr.)& second showing o/p of std.transaction MB5B( 31 Cr.)
    Kindly help me in this case.

    Hi Dev,
        I have created Z program (i.e copy of std program) of RM07MLBD & Z program name is ZMB5B_COPY & i assigned tcode for that is ZMB5B. Closing stock quantity is also not
    showing same.
    First closing stock is my Z program & second is of std.program
    Thanks & Regards,
    Samadhan.

  • Getting error when copy the SWRB Transaction.

    Hi experts,
    This is very urgent requirement.
    There is a one transaction in CRM  5.0 that is SWRB(Web Request w/o Item) in service process. This transaction doesn't have any item details,but when I copy that transaction it is showing item details also.
    I don't know how this is possible. I should get the copyed transaction also without item level details.
    Please clarify if any one knows.
    Actually I am using this is SWRB transaction for creating service request.
    If any body knows any transaction in crm without item details please let me know.
    Thanks and regards
    Koti
    My mail id is : [email protected]

    Hi Koti,
    When you create new transaction type by copying the transaction type "SWRB", the new transaction type will have the following transaction categories under "Assignment of Business Transaction Categories" in Customization of Transaction Type.
    1.Sales
    2.Service Process
    3.Business Activity
    Since "Sales" is the transaction category used in any business transaction to sell any kind of items. This is the reason why you are getting item details in your newly created transaction type.
    So Goto the customization of new transaction type that you have created and remove "Sales" transaction category under "Assignment of Business Transaction Categories", then try to create business transaction with that transaction type, you will not get any item details.
    <b>Reward points if it helps</b>
    Murali

  • Need Help to copy data into transactional cube

    Hi,
    I am stuck in following situation, please help
    Basic Cube – cube1
    Transactional Cube – cube2
    Planning Area – PA1 for cube1
    Planning Area – PA2 for cube2
    Multi Planning Area – MPA over PA1 and PA2
    Now how do I copy all the data from cube1 and cube2? Please can anyone provide me with the steps?
    Thank you,
    sam

    Hi Sam,
    Use need to use a copy function.This function should on a level in the Multilplanning area which  includes all the characteristics and Key figures present in both Cube1 and Cube2. Create a Copy Function with fields to be changed as Planning areas i.e in the from use PA1 and in to use PA2.Now when the function is executed all the data is copied from PA1 to PA2.
    Another way would be a FOX formula ,but a copy function mentioned above should do the job.
    regards
    Sai Vishnubhatla

  • How to insert new line in the copied schema with transaction code PE01?

    Dear Experts,
             I have copied HKT0 to ZKT0 , i want to insert new line between  line 150 and line 160 in ZKT0, I don't know how to insert new line 160, who can tell me ?
             Looking forward to your reply.
    Best Regards,
    Merry

    Hi,
    1. Open your schema,
    2. In first colume "Line" select line where you want to add new line,
    3. Replace first value in the column field (that indicates number of line) with character I (means insert),
    4. Press enter
    The line will be added. The same way you can add lines to PCR.
    To delete use character D.
    Cheers

  • MD07 Transaction Report

    Hi All,
    I have a requirement wherein a report similar to MD07 (Stock/Requirements List) has to be developed. This will output the Period Totals (on a weekly basis) and the net requirements. (eg: Week 32/2006 - Available Qty: 10000).
    If anyone has worked on this type of requirement please share with me the code or atleast give me any standard program name wherein i can refer and develop.
    Thanks and Regards
    Selva

    Hi,
    please try MD_STOCK_REQUIREMENTS_LIST_API.
    Rgds,
    JP

  • Follow-up transaction copy control for opportunities

    Our CRM system is currently configured to permit follow-up opportunity creation.  When follow-up transactions are created all product categories are copied to the new opportunity.  We would like to stop this.  All header and business partner data should be copied as present, however product information should not be copied.  (i.e. follow-up transactions currently work, we only want to switch off product data copying)
    I am not familiar with follow-up transaction customization, and not sure exactly where to start.  Should I be modifying the current BAdI or is there a standard customizing option to switch off copying of product categories?

    Hi Derek,
    Just try this:-
    Go to SPRO->IMG->CRM->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types.
    Search for entry Source=oppt and target=oppt.In this entry, uncheck the check box-Copy Item Number and see if it resolves your issue or not?
    Thanks and Regards,
    Rohit

  • Copy item text in business transaction

    Hi,
    when copying a business transaction, I use function modules read_text and save_text to get the text from the original and save it to the copy. On header level this works fine (text is visible, order still not saved), on item level the copied text is invisible. When I save the copied order, I see both texts on header- and item-level. Does anyone knows how to make it visible also in creation mode on item level?
    Copying (read_text and save_text) is performed in CRM_COPY_BADI/ CUSTOMER_I and CUSTOMER_H.
    Thanks,
    Stefan.

    Sorry, I didn't add the solution :
      CALL FUNCTION 'CRM_TEXT_COPY_121_OW'
        EXPORTING
          iv_header_guid_old = o1
          iv_object_guid_old = o2
          iv_header_guid_new = n1
          iv_object_guid_new = n2.
    After saving the text I call above function, then the text is visible.
    Cheers,
    Stefan

  • Why it is difficult to copy Business Transactions and make it a Z object

    Hi
    I am looking for a proper explanation why it is difficult and not suggested to make a copy of the entire business transaction ( example va01 or any other transactions ) and make a z object and modify it so as to companies business scenarios.
    I need explanation with respect to solution manager,
    where standard sap ticket processing needs to be modified, why can't we copy it into a z object and modify, why we need access key to modify sap standard.
    Thanks & Regards
    Abhimanyu L

    Firstly what is the transaction you wish to modify.
    If I were doing it, I would look at how I would modify the standard SAP code compared to the effort in taking a copy. You should also take into consideration the time it may take to resolve any upgrade issues. Personally I would say that changing the standard SAP in most cases would be the quickest to develop. However, your business case may be to complex to amend the standard SAP.
    When you copy a standard transaction, there are occasions when the SAP Main program is hardcoded into the SAP code. This can also cause you problems as you would need to amend this to use your version of the main program. You can also have problems with Status menu's as they may be coded to use against the SAP Main program.
    Hope that makes sense.

  • Copying standard transaction to Z-Transaction

    Hi,
    I need to copy standard transaction to Z-Transaction,
    i.e., MIRO to ZMIRO.
    And then I need to insert some code in one of the include program of ZMIRO.
    please tell me the various steps involve for copying a standard transaction.

    While copying a standard transaction may at first seem the easy way to achieve the functionality you need, there are a number of longer term negatives with this approach.
    If you copy major parts of SAP code like this, your copies will not be kept up to date as SAP OSS Notes are applied to the original using SNOTE.  You can manually apply such changes, but this is nearly always forgotten as the person applying the note does not always realise there is a local copy.
    This also applies when support packs are loaded - the SAP code can be changed without these changes being reflected in your copy.  In the worst case scenario, the change may result in your copy of the transaction performing invalid updates to data and causing data integrity issues in your system.
    When the time comes to upgrade the system, there will be a major amount of work in comparing the Z version of the code with the standard code to identify what is in the new version and to update the Z code - in a lot of cases this will mean a complete rebuild of the Z version is required.
    It is far better to use available BADIs, user exits, enhancement points and even repairs using the object key to achieve the desired result so that tools like SNOTE, SPAU, etc can keep the basic code up to date with the latest patches.
    Another option for some types of change is to build a custom screen that calls the standard transaction using BDC / Call Transaction or using a BAPI so that the data is presented as desired by the customer, but the updates still use the SAP supplied code.
    Andrew

  • Standard transaction copy

    Hi Friends,
    I want to do copy of standard transaction and i want to do some modifications.
    how to proceed. Help me.
    Thanks in advance.

    Hi,
    In ur case, u need to copy the whole underlying program for the transaction into a  Z program and then make ur changes.
    For this, u first get to know the underlying program for the transaction. Goto SE93 --> Put the tcode and click display. This will show u the program name.
    Now, tht u hv got the pgm name, goto SE80 --> Select the object as Program and give the Program name.
    Now click on copy and provide the Z program name.
    if neede, u also will hv to copy the Includes, Documentation, etc. for the same.
    Regards,
    Himanshu

Maybe you are looking for