Copy of Reports and folders

Hi all,
in WIndows, When I am trying to copy the particular report folder in same directory just by simple copy pasting the folder and tried to rename the copy , it works.
But when i try to view the changes in server online, I could just see a folder with changed name and with no contents in it.
I even dont want that to be appeared as a folder. I want to be as a report, as it was for the unchanged one.
for the unchanged one, the folder in windoes box is reflected as a report in the online server, where as for the changed one, it is just a folder than a report, that too with no contents in online server.
Can any one please help me with this.

Got it. need to change the xdo file as well just set to folder name to reflect the changes.
this makes the folder look like a report in server.

Similar Messages

  • Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

    Hi Apple community!
    I have a [rather worrying] problem.
    When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
    " The operation can’t be completed because an item with the name “.DS_Store” already exists. "
    I am not given an option to skip this file or anything else.
    But I simply cannot complete the operation!
    I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
    but no success.
    The same thing keeps happening.
    At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
    but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
    So effectively, it seems I cannot backup my files anywhere!
    Any help or advice would be greatly appreciated.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Copying all mail and folders from one mac to another

    I have a pop account that loads to my imac. all the mail is sorted into folders and kept there till needed. is it possible to take all the mail on my imac and transfer it to my macbookpro so i have all my files sorted when i go on trips? can i either upload it or do it through .mac? i thought i could just archive the whole thing like in entourage and reopen it, but i haven't found a way to do that yet. Can you help?

    All your mail and mail attaachments are in /Users/inahayes/Library/Mail and /Users/inahayes/Library/Mail Downloads (unless you set up your Mail downloads to be saved somewhere else). While not hte most elegant of solutions, conceivably, you could manually afp-mount one computer onto the other's desktop (⌘k or ⇧⌘k in Finder) and drag those two folders to the corresponding /Users/inahayes/Library folder on the MBP. When you return from your trip, do the same thing in the opposite direction. However, an imap account would eliminate this problem, if you have the ability to migrate to an imap account.

  • Copy Workspace folder and contents

    I would like to copy all files and folders in a folder on the Workspace to another folder on the Workspace. What's the best way to do this?
    I'm using Hyperion Reporting and Analysis Workspace 9.3.3.

    Hi Dougp,
    I guess you want to restructure the folder view in work space,, if I am right,,
    all you have to do is to simply use copy and paste action to move the folders and what ever insides of the folders.
    Just right click on the folder or the contents in side the folder and copy them, then you can paste it either at
    top level of the tree or any of the below levels.
    If you want to move the folders in b/w the environments I suggest to do Export to file system-->FTP to target server-->Import from file system.
    If you want to do export & Import b/w environments make sure the database connections on the target workspace are set up according to the
    source (navigate to manage database connections) else you will get a message saying whether to replace the source database connection with one of the
    existed database connections in target.
    --Ram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Problem opening a project into NWDS - Files and Folders disappears!

    Hi Gurus,
    My co-worker developed a Web Dynpro    project in your PC, so I copied all files and folders to my PC.
    When I import this project into NWDS in my PC some files and folders strangely disappears physically from Windows causing error in project!
    Somebody haves idea what is happening?
    Thanks!
    Robson

    Hi,
    Follow these steps , how to import a Web Dynpro project in to NWDS.
    http://help.sap.com/saphelp_nw04/helpdata/EN/80/c12041aa7df323e10000000a155106/content.htm
    Thanks
    Krishna

  • Altering copied SAP report layout

    I've copied SAP std report from investment management (in IME2) to create my own layout. I've copied the report and form, and have alterred the form to my liking.
    When I execute the report, the summary section at the bottom of the report appears correctly, but the middle section doesn't show the same columns.
    I can't find where this is controlled/stored. How do I get into the centre section of the report layout to alter the column layouts and bring in my new columns when the report executes.
    Can anyone tell me how I get into this area of a report to configure the column layout
    Thanks
    Graham

    Hi Prasanna
    No I've checked throughout Report painter/writer, and its not there.  Style wise, it appears to be more of a Profitability Analysis report.
    I've managed to create my own copy of  SAP standard report S_ALR_87012825, with a modified form that gives me what I nee at the bottom summary section.  I've spent hours trying to get into the middle section, but just can't find a way.
    the nearest I got was in IME2, where I can right click on the program name, and choose "Layout Display", but there doesn't seem to be any editing options where I can alter the columns in the middle section of the report, which I basically want to replicate the summary section at the bottom.
    Graham

  • Cannot see file and folders copied from other windows 8

    Hi everyone,
    The problem is the next:
    I have new PC for that i was asked to setup and install software, i perform on it clean windows 8 install, it have single HDD 1TB that was partitioned by regular windows setup option to system drive C: 100GB and all left space was partitioned as drive D:
    After setup finish i only boot to system to check that everything is OK and without to make ANY change to windows shut it down.
    I physically disconnect HDD from new PC and connect it via standard USB 3 docking device to my own PC that also run windows 8 i can see the new connected HDD with all partitions without any problem! Than i create on second partition on new drive folder and
    copy there some files, after copy finished i disconnect the drive in safe way by performing "eject" option in windows.
    i connect new drive back to new pc, boot to windows and access the second partition and it ... empty, no folder or files on drive, it also show like no space was used !!!
    MOST IMPORTANT ! - Why it don't looks like security or permission or even hardware problem - NO any major security changes was performed on my own (old) PC, but most important fact when i connect other hdd to same dock station and create folder and copy some
    files and then connect it to NEW PC - problem does not exist !!! i can see and access without any problem the folder and files on both PC's !
    I also tried:
    to reinstall windows on new pc
    to create or delete partition after setup in both PC's
    to check folder and drive permissions and adding "everyone" with "full control"
    to turn on "show hidden files and folders" and "system files" too
    to copy or create new different type files
    Interesting - if i create a folder in NEW PC i can see this folder on OLD PC and copy files to it, but whet i connect drive back to NEW PC it sometimes show the folder have those files and even use the appropriate space and programs even try to open those files
    without any security warnings but it cannot be open properly because files looks corrupted !
    Thanks for any help !

    Hi,
    According to your description, I don't think this is system problem. More like HDD or its interface problem.
    Have you tried to reconnect your new HDD to your own computer again after you copy some file to it but couldn't find anything on new computer. If there is problem in new PC, how about your own PC?
    Please have a try, If there was any progress, feel free let us know.
    Roger Lu
    TechNet Community Support

  • Print Multiple copies of report, and resetting Page number for each copy.

    Dear frnds!
    i am using developer 6i reports i have a problem.
    i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
    1 - for user copy
    2- gate copy
    3- accounts office
    4- office copy
    any body please tell me the solution "i am using oracle 9i and developer 6i"
    Thanx
    Ibrar

    Hi,
    I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
    <?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
    HEADER
    PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
    PSN Detail: <?$G1/PickSlipNumber_ID260?>
    Page 1 of 3
    <?start:body?>
    BODY
    <?$G1/LineNumber_ID6?>
    <?end body?>
    FOOTER
    <?end for-each?>
    <?end for-each-group?>
    XML:
    <R5542520>
    <Pick_Slips_Detail_Lines_S24>
    <Header_Custom_Section_S24>
    <Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
    <PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

  • Sorry, Flagfox has encountered a problem. Please copy the report below and post it on our forums with a detailed explanation of what you were doing at the time so we can attempt to fix your issue. (English please) Flagfox version null (missing IPDB!)

    Sorry, Flagfox has encountered a problem. Please copy the report below and post it on our forums with a detailed explanation of what you were doing at the time so we can attempt to fix your issue. (English please)
    Flagfox version null (missing IPDB!)
    ERROR MESSAGE: Fatal Flagfox startup error!
    EXCEPTION THROWN: TypeError: ExtensionManager.getItemForID(id) is null
    STACK TRACE: startup()@file:///C:/Documents%20and%20Settings/Vanessa%20Ecret/Programdata/Mozilla/Firefox/Profiles/9eyewkfc.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:40
    ([object ChromeWindow])@file:///C:/Documents%20and%20Settings/Vanessa%20Ecret/Programdata/Mozilla/Firefox/Profiles/9eyewkfc.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:160
    Flagfox_loadForThisWindow([object Event])@chrome://flagfox/content/overlay.xul:16
    BROWSER: Mozilla Firefox 3.6.6/20100625231939 (Gecko 1.9.2.6/20100625231939) using locale en-US on WINNT x86-msvc
    This error and a Flagfox preferences dump has been sent to Tools -> Error Console. Please report this and any related errors so we can investigate your problem. Conversely, if you don't report this then it probably won't get fixed.
    == i was update

    Sorry, the Flagfox extension has encountered a problem. The following error output and a Flagfox preferences dump has been sent to Tools -> Error Console.
    FLAGFOX VERSION: 4.1.x (missing IPDB!)
    ERROR MESSAGE: Fatal Flagfox startup error!
    EXCEPTION THROWN: TypeError: addon is null
    STACK TRACE:
    (null)@resource://flagfox/flagfox.jsm:70
    safeCall((function (addon) {try {FlagfoxVersion = addon.version;var ip4db = addon.getResourceURI(IPv4DBfilename).QueryInterface(Components.interfaces.nsIFileURL).file;var ip6db = addon.getResourceURI(IPv6DBfilename).QueryInterface(Components.interfaces.nsIFileURL).file;ipdb.init(ip4db, ip6db);checkIPDBage();ready = true;} catch (e) {handleStartupError(e);}}),null)@resource://gre/modules/AddonManager.jsm:48
    ([object Object])@resource://gre/modules/AddonManager.jsm:897
    AOC_callNext()@resource://gre/modules/AddonManager.jsm:118
    (null)@resource://gre/modules/AddonManager.jsm:892
    PL_getAddon("{1018e4d6-728f-4b20-ad56-37578a4de76b}",(function (aAddon) {if (aAddon) {safeCall(aCallback, aAddon);} else {aCaller.callNext();}}))@resource:///modules/PluginProvider.jsm:79
    callProvider([object Object],"getAddonByID",null,"{1018e4d6-728f-4b20-ad56-37578a4de76b}",(function (aAddon) {if (aAddon) {safeCall(aCallback, aAddon);} else {aCaller.callNext();}}))@resource://gre/modules/AddonManager.jsm:76
    ([object Object],[object Object])@resource://gre/modules/AddonManager.jsm:888
    AOC_callNext()@resource://gre/modules/AddonManager.jsm:124
    (null)@resource://gre/modules/AddonManager.jsm:892
    (null)@resource:///modules/XPIProvider.jsm:3047
    ([object Array])@resource:///modules/XPIProvider.jsm:4864
    (0)@resource:///modules/XPIProvider.jsm:3867
    BROWSER: Mozilla Firefox 7.0.1 (Gecko 7.0.1 / 20110928134238)
    OS: Windows NT 6.1 (WINNT x86-msvc windows)
    LOCALE: en-us content / en-us UI / en-us OS
    Select and copy the error report above. In order to fix this problem for you and others, please read and follow the troubleshooting and bug reporting instructions on the Flagfox support forums. Please post an abundance of information with any error reports, namely what you were doing at the time that may have triggered this. (English please)

  • Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC?

    Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC? I was wondering since my iTunes files and folders are connected to iTunes.

    You can but the TC is the worst possible location. The design is slow to start and quick to stop data connections.. that will cause trouble.
    Moving folders has specific instructions.
    http://support.apple.com/kb/ht1364
    Move it to an external hard disk fine.. but be very sure you will not be happy with the TC as a location.

  • Using Terminal to copy all files (hidden and not hidden) and folders from one place to another

    How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another

    ditto
    DITTO(1)                  BSD General Commands Manual                 DITTO(1)
    NAME
         ditto -- copy directory hierarchies, create and extract archives
    SYNOPSIS
         ditto [-v] [-V] [-X] [<options>] src ... dst_directory
         ditto [-v] [-V] [<options>] src_file dst_file
         ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
         ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ...
               dst_directory
         ditto -h | --help
    DESCRIPTION
         In its first form, ditto copies one or more source files or directories
         to a destination directory.  If the destination directory does not exist
         it will be created before the first source is copied.  If the destination
         directory already exists then the source directories are merged with the
         previous contents of the destination.

  • Regard download and copy of report

    Hi Experts,
    i have got a request from our client .
    he want to download the report directly into email so that he can send it to anyone.
    also he want copy the report not its xml from copy option in dashboard.
    is it possible ?
    please suggest solutions.

    Hi User,
    For download to email, you have to go for Ibots.When you set up an Ibot and schedule it, the report will be delivered to the user's mail box.
    Rgds,
    Dpka

  • Copying a report from one environment to another

    Hi,
    I need to copy a report from QA to PROD. I saved the report in local drive from Desktop, connected to PROD and then tried to open the it in PROD. But I am getting an error message from "Visual C++" saying "Abnormal Program Termination".
    I am using Discoverer 10g Rel 1.
    Have anyone experienced this error ?
    Please help.
    Yogini

    Hi,
    Thanks for the reply. I found that the business area was missing a join as compared to the QA business area. After adding the join, it is not giving me any errors, but returns no data.
    The query returns data in Toad. -- So I have access to the database views
    I am not getting any errors in Discoverer -- so I have access to the folders too.
    I confirmed that the folder is shared with the proper responsibility.
    Still I dont see any data.
    Any idea/suggestions are appreciated.
    Yogini

  • Report on folders/files including the path charchter length

    Hi, i am trying to find a way of exporting or creating a report that will extract the file/folder path charachter length and the trustees of all our users data.
    Our Data volume which contains all our users data/files & folders have become almost unmangeable regarding too many nested folders and very long naming used for files and folders.
    I am trying to find out all the files/folder - including their full path chrachter length with the owners/trustees into a report.
    Once i can extract this information i can then start resolving those problematic areas - as normal basic admin tasks are proving difficult such as copy/cut and paste - i keep getting errors.
    Once i can resolve/identify the areas that contain all the long chrachters and who the trustees are - i can then start to restrucutre the data into a more managmeable way.
    Any assistance - greatly apprecated.
    regards
    Dennis

    Dchitolie,
    > Hi, i am trying to find a way of exporting or creating a report that
    > will extract the file/folder path charachter length and the trustees of
    > all our users data.
    > Our Data volume
    Trustee.nlm will create a file that you can import into something for
    further processing.
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Have an idea for a product enhancement? Please visit:
    http://www.novell.com/rms

  • Can we copy standard buisness area folders to customise business area folde

    hai,
    I want to copy standard business area folders to customise
    business area folders.How I have to link AP_PO_INV and how many folders
    i will get in customise business from ap,po and inv.what are they.
    Thanks

    Hi,
    As Russ says, yes you can take the supplied folders and copy these into your own custom Business Area - then add or subtract to them as much as you like.
    How you join them will depend on your APPS set up - assuming that the joins supplied by Oracle do not fit your purpose.
    You can also join your own simple/custom folders to these standard folders - again this depends on what you want to report and how you have set up your APPS (use of DFFs, custom tables etc)
    Matt

Maybe you are looking for