Copy of transction MD05 to ZD05 going dump.

Hi experts,
I have copied the transacion MD05's prorgram SAPMM61R to ZSAPMM61R with some changes.  But it is going dump. I checked the program in debugging.  In the include MM61RF30_DISPOLISTE_SAMMEL the structures CM61X and CM61B are not getting data.
Also I checked the standard program also in debugging mode.  I didn't find where these structures are getting data.
Help needed sooner or later..
Thanks,
sreenivas.
Edited by: Rob Burbank on May 19, 2009 3:37 PM

Hi,
How can we findout if the program is dynamically creating any structures.
Thanks,
sreenivas.

Similar Messages

  • Ztable going dump

    hi all,
    here is my problem . I have ztable with some 1000 records. According to new requirement i changed the domain of a field String to dec. then went se14 adjust & activate.. now table was going dump.
    plz give me suggestions where i am went wrong.
    Regards
    Raju Mummidi

    Hi Raju,
    First of all, activate the Domain and the data element. Then activate the table.
    You are not required to delete any data, as the string could contain any form of data such as packed decimal or integer. When you modify the data type of the domain, it will just change the type, but there won't be any kind of checking with the data you created.
    you need to delete your maintenance generator that you have created priviously and generate new maintenance generator.
    Hope it will solve the problem of dump.
    Please check and reply in case of dump again.
    Regards,
    Arun kayal

  • HR ABAP Posiition Holder Org Unit value going dump

    Hi Experts,
    I am working now HR ABAP. My issue is,  I am using standard Program RHXPEP01. This Program is nothing but. Profile Match up Position/Holder.
    Once i execute this program and enter the  value of Org. Unit Value is 60010128. Then after 15mints it will be going dump.
    The error message is going to many iterations are going on.
    If I execute 60010129 it is working fine. This Org Units are avilable in Production.
    Can you plz help me on this.
    Thank You
    Sri

    Hi ,
    Please check this thread might be helpful.
    Runtime Errors STORAGE_PARAMETERS_WRONG_SET
    Regards,
    Siraj.

  • PO copy in SRM 7 leads to short dump

    Hello,
    We are implementing SRM 7 Level 9 with ECS.
    Each time we are trying to copy one PO we get a short dump :
    http://XXX/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Access via 'NULL' object reference not possible.
    Method: CHECK_COPY of program /SAPSRM/CL_PDO_DYN_MDA_HD_PO==CP
    Method: /SAPSRM/IF_PDO_META_CONF_BO~GET_BO_HDR_ACTION_METADATA of program /SAPSRM/CL_PDO_META_CONF_PROV=CP
    Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_PO=====CP
    Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_BO_PO_ADV=CP
    Method: /SAPSRM/IF_PDO_META_CONSUMER~GET_ACTION_METADATA of program /SAPSRM/CL_PDO_META_HANDLER===CP
    Method: UPDATE_ACTIONS of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
    Method: /SAPSRM/IF_CLL_MAPPER~REFRESH of program /SAPSRM/CL_CH_WD_MAP_IDENT====CP
    Method: OVERRIDE_LEAVE_INIT_SCREEN of program /SAPSRM/CL_FPM_OVRIDE_OIF=====CP
    Method: /SAPSRM/IF_FPM_OVRIDE_EVT_OIF~OVERRIDE_EVENT_OIF of program /SAPSRM/CL_FPM_OVRIDE_OIF=====CP
    Method: OVERRIDE_EVENT_OIF of program /1BCWDY/9OA8VNC7OSV3G978R0K5==CP
    It occurs with PO created from scratch or generated from SC.
    In st22 we have :
    OBJECTS_OBJREF_NOT_ASSIGNED_NO     CX_SY_REF_IS_INITIAL
    Everything is full standard. We tried with a SAP ALL/SAP NEW user.
    Thanks in adance for your help

    Hi,
    Fix has been available.
    https://service.sap.com/sap/support/notes/1513127
    Regards,
    Masa

  • If i run oops alv in background, its going dump

    If I run oops alv in background its going dump?
    can any one suggest me to do this or to overcome
    thanks and regards
    setty

    ALV's can be run in background if you use a docking container instead of a custom container.
    Please search the forum for "ALV in background". You will find tons of threads with solutions.
    Re: How to run ALV reports in batch
    Sample code to have ALV Grid in Background

  • Going dump for ME41 t-code

    Hi Friends,
    I activated MM06E005 using  SMOD t-code.
    if run ME41 system going dump and it is saying
    Program "SAPLXM06" tried to use screen 0301.
    The screen does not exist.
    Can any body help what may be the wrong.
    It is working fine for ME21, Me51.
    I am into 4.7
    Regards,
    Naresh.

    Hi,
    The FMs in the enhancement MM06E005 are for importing and exporting values to and from the screens mentioned in the Screen Areas tab in SMOD.
    So unless you activate the screens you can't use the FMs.
    Hope this helps.
    Thanks,
    Balaji

  • My import FM is going DUMP

    Hi All,
    I have import request and i got sucess .My 3 function modules are import to client system.2 FM are working properly but 1 function module is going for DUMP.
    I have gone dump analysis its saying
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
    was neither
    caught nor passed along using a RAISING clause, in the procedure
    "MO_IMPORT_MODIFICATIONS" "(METHOD)"
    "Length error occurred during the IMPORT statement."
    "The system found when importing that the target object was longer or
    shorter than the object to be imported."
    where did i mistake while import ? or while transport?
    That FM is working properly in our DEV.
    Thanks in Advance,
    Madhu.

    Hello,
    I would like to know how did you solve the issue as i came across the same issue.
    Thanks,
    FBK

  • I need need a copy of the cat binary that goes in /bin

    I called apple support and the server section is closed so I was wondering if anyone could help me replace the actual cat command file as I accidentally deleted mine.

    Keith Barkley wrote:
    If you were going to compile it, it might have been quicker and easier to just copy K&R's example. Since you are obviously a power user, you can probably skip all the error checking. Then again, you did delete your cat command...
    Yes i did and I'm still reeling from the shock/embarrassment. The irony, of course, is nothing makes you a power user faster then the necessity of having to fix something you broke - although I don't actually think of myself as such. In this case, I can't even fathom the odds of how I just happened to be in the very directory that actually stored that particular file AND then delete it!
    The only reason I added that last comment was to, hopefully, mark it as solved so anyone else might have a fighting chance but this interface has defeated me by not supplying the "This solved my problem" button that it usually provides.

  • MARA table going DUMP due to append structure

    Hi all,
    I have created the structure and i have Appended  to MARA table. Since then MARA Table is Partially  Active State. So, i tried to delete the structure. But i am unable to delete that Structure, because it was used in MARA Table. Even i tried SE14 Transaction also.Here i did Adjust and Activate table, But it is showing SHORT DUMP. Even if check the Error in SE11, it is showing "No inconvience found, but i activate the table again it is going to dump ".
    How to solve this .
    My requirement is to bring back the MARA table into its origional state. and how to delete the Appended structure in MARA table ?
    Thanks in advance
    KR

    Hi,
       An APPEND structure is a DDIC structure that is assigned to a single DB table. In the ABAP dictionary (SE11) you call the corresponding DB table and create the APPEND structure for this table.
    In which scenario do we create APPEND structures? Obviously, the attributes available in the DB table are not sufficient to meet your requirements. Thus, you append the missing fields to the table.
    http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
    Regards

  • Going Dump in J2IU

    Hi All,
    whil executing the transaction J2IU in ECC 6.0 it is going to dump can any body please let me know why it is going for dump i have even searched for notes. I didnt find any relevant notes also. please let me know.

    Yes It is going for a dump, i have faced the same problem the basic reason is
    While executing the transaction J2IU it is calling a subroutine determine_default_values in the program J_1IUPBO. Then that subroutine is there in the other program SAPMJ1II.
    While sending the parameters the structures in the calling program and called program are different.
    The TOTALS structure in main program is,
    DATA : BEGIN OF TOTALS ,               "structure to store the total val
              BED     LIKE J_1IEXCHDR-EXBED,
              AED     LIKE J_1IEXCHDR-EXAED,
              SED     LIKE J_1IEXCHDR-EXSED,
              CESS    LIKE J_1IEXCHDR-CESS ,
    *NCCD changes starts
              nccd     like j_1iexchdr-nccd,
    *NCCD changes ends
               ecs     like j_1iexchdr-ecs,
              zero    type c,              "T=zero value, F=some value
           END OF TOTALS.
    The TOTALS structure in the include program where that subroutine exits is,
    DATA : BEGIN OF totals ,               "structure to store the total val
              bed     LIKE j_1iexchdr-exbed,
              aed     LIKE j_1iexchdr-exaed,
              sed     LIKE j_1iexchdr-exsed,
              cess    LIKE j_1iexchdr-cess ,
        NCCD Changes begin
              nccd    LIKE j_1iexchdr-nccd,
        NCCD Changes ends
              zero    TYPE c,              "T=zero value, F=some value
           END OF totals.
    Like that all the structures are different. Basically ECS field has not been added in the include program. Thatu2019s why the program is going to dump.
    The structures which are different are max_bal, rg23a, rg23c and st_pla.
    Regards,
    Sunil Kumar Mutyala.

  • After copied class from standard class program getting dump.?

    HI
    Expert
    I copied to a zclass from standard class (CL_SPROJECT_SOLAR_BASE_REPORT).. if calling program through zclass program getting dump, if calliing program through above standard class then it works fine...
    error is
    The function module interface allows you to specify only fields of particular type under i_so_report. The field "ME" specified different here......
    Note:- Totaly i copied from standard class and activated it also.. even i did not changed any code inside method .but facing this dump why..
    How to achieve this...pls help me out
    Thanks
    Susanta

    I did wt ever was there given solution but still not resolved pls help me ..thanks
    showing error
    Call Method XXXXX
    DATA: lo_grid TYPE REF TO CL_SPROJECT_SOLAR_BASE_REPORT.
    lo_grid = me.
      CALL FUNCTION 'SPROJECT_EVAL_SET_SELSCREEN'
        EXPORTING
          i_o_data_container     = a_o_data_container
          i_v_reptype            = global_reptype
          i_o_sa_report          = lo_grid
          i_v_category           = category
          i_o_data_cont_lnk_docu = a_o_data_cont_lnk_docu "MP 21.07.05
    syntax error - The type of "ME" cannot be converted to the type of "LO_GRID". ..why..? did i coded incoreclty or tell me where to define that data type...

  • My playlists appear empty and I am barred from copying to Playlist folders; what is going on here

    My playlists appear empty and I am barred from copying music to the playlist folders; what's going on?

    Hi bbmkc,
    It sounds like you are interested in "My Photo Stream" with iCloud which syncs your pictures between devices.  Please see if this is what you need.
    iCloud: My Photo Stream overview
    iCloud: Set up My Photo Stream
    Thank you for using Apple Support Communities.
    Nubz

  • Back ground job is going dump

    Hi, experts,
    When excuting the program in background, the call to MB5B  returns an error message to choose at least one scope of list
    category.  Need to pass these values to the SUBMIT in order for program to execute successfully in background.
    in  the program this  is the function module code  in this i am geting dump(error  : raise not found 
    TABLES: T439I, T001W, T439G.
      DATA: V_DIFF TYPE I,
            V_T439I LIKE T439I,
            V_T439I_2 LIKE T439I.
    * check plant
      SELECT SINGLE WERKS FROM T001W INTO T001W-WERKS
                                             WHERE WERKS EQ IN_WERKS.
      IF SY-SUBRC NE 0.
        RAISE INVALID_PLANT.
      ENDIF.
    * check planning period
      SELECT SINGLE WERKS FROM T439G INTO T439G-WERKS
                     WHERE WERKS EQ IN_WERKS AND MRPPP EQ IN_MRPPP.
      IF SY-SUBRC NE 0.
        RAISE INVALID_MRPPP.
      ENDIF.
    * convert date to week and date range
      IF IN_WEEK IS INITIAL.
        IF IN_DATE IS INITIAL.
          RAISE INVALID_DATE.
        ENDIF.
        SELECT * INTO V_T439I FROM T439I UP TO 1 ROWS WHERE
              WERKS EQ IN_WERKS AND
              MRPPP EQ IN_MRPPP AND
              PPVON LE IN_DATE AND PPBIS GE IN_DATE.
          CONTINUE.
        ENDSELECT.
      ELSE.
    * convert week to dates
        IN_DATE(4) = IN_WEEK(4).
        IN_DATE+4(4) = '0101'.
        SELECT * INTO V_T439I FROM T439I UP TO 1 ROWS WHERE
              WERKS EQ IN_WERKS AND
              MRPPP EQ IN_MRPPP AND
              PPERI EQ IN_WEEK+4(2) AND
              PPBIS GE IN_DATE.
          CONTINUE.
        ENDSELECT.
      ENDIF.
      IF SY-SUBRC NE 0.
        RAISE NOT_FOUND..........................................here i am geting error
      ENDIF.
    * check for full week
      V_T439I_2 = V_T439I.
      V_DIFF = V_T439I_2-PPBIS - V_T439I-PPVON.
      IF V_DIFF NE 6.
    * odd week - first check for next week
        IN_DATE = V_T439I-PPBIS + 1.
        SELECT * INTO V_T439I_2 FROM T439I UP TO 1 ROWS WHERE
              WERKS EQ V_T439I-WERKS AND
              MRPPP EQ V_T439I-MRPPP AND
              PPVON LE IN_DATE AND PPBIS GE IN_DATE.
          CONTINUE.
        ENDSELECT.
        IF SY-SUBRC NE 0.
          RAISE MISSING_WEEK.
        ELSE.
          V_DIFF = V_T439I_2-PPBIS - V_T439I-PPVON.
          IF V_DIFF NE 6.
    * still odd week - now check for prev week
            V_T439I_2 = V_T439I.
            IN_DATE = V_T439I-PPVON - 1.
            SELECT * INTO V_T439I FROM T439I UP TO 1 ROWS WHERE
                  WERKS EQ IN_WERKS AND
                  MRPPP EQ IN_MRPPP AND
                  PPVON LE IN_DATE AND PPBIS GE IN_DATE.
              CONTINUE.
            ENDSELECT.
            IF SY-SUBRC NE 0.
              RAISE NOT_FULL_WEEK.
            ELSE.
              V_DIFF = V_T439I_2-PPBIS - V_T439I-PPVON.
              IF V_DIFF NE 6.
                RAISE INVALID_WEEK.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
      IF SY-SUBRC NE 0.
        RAISE INVALID_WEEK.
      ENDIF.
      OUT_WEEK(4) = V_T439I_2-PPBIS(4).
      OUT_WEEK+4(2) = V_T439I_2-PPERI.
      OUT_FIRST_DAY = V_T439I-PPVON.
      OUT_LAST_DAY = V_T439I_2-PPBIS.
    ENDFUNCTION.
    Title changed - please use code tags
    Edited by: Rob Burbank on Nov 15, 2010 1:37 PM

    That  is custom FM   Z_coors_week
    CALL FUNCTION 'Z_COORS_WEEK'
           EXPORTING
            IN_WEEK       = 000000
                in_date       = p_date
            IN_WERKS      = '0010'
            IN_MRPPP      = '001'
           IMPORTING
                out_week      = t_hdtxt-cweek
                out_first_day = dt_start
                out_last_day  = dt_end
           EXCEPTIONS
                invalid_week  = 1
                invalid_date  = 2
                invalid_plant = 3
                invalid_mrppp = 4
                not_full_week = 5
                missing_week  = 6
                not_found     = 7
                OTHERS        = 8.
    they have used two times in the program
    CALL FUNCTION 'Z_COORS_WEEK'
               EXPORTING
                    in_date  = t_hdtxt-stdate
               IMPORTING
                    out_week = t_hdtxt-cweek.
    please let me know ...for second time  exceptions not used ..

  • RFC going dump

    HI to all,
      I have developed a  RFC fucntion module for to calculate tax for every employee nubmer. Its showing tax details in portal. But when we execute same RFC in  SE37 its showing dump. Why it can happen like that.can u suggest reason for that.

    hort text
       Exception condition "T500P_NOT_FOUND" raised.
    hat happened?
       The current ABAP/4 program encountered an unexpected
       situation.
    hat can you do?
       Note down which actions and inputs caused the error.
       To process the problem further, contact you SAP system
       administrator.
       Using Transaction ST22 for ABAP Dump Analysis, you can look
       at and manage termination messages, and you can also
       keep them for a long time.
    rror analysis
       A RAISE statement in the program "SAPLHRPADINA1" raised the exception
       condition "T500P_NOT_FOUND".
       Since the exception was not intercepted by a superior
       program, processing was terminated.
       Short description of exception condition:
       Region  not found for personal area
       For detailed documentation of the exception condition, use
       Transaction SE37 (Function Library). You can take the called
       function module from the display of active calls.
    ow to correct the error
       If the error occures in a non-modified SAP program, you may be able to
       find an interim solution in an SAP Note.
       If you have access to SAP Notes, carry out a search with the following
       keywords:
       "RAISE_EXCEPTION" " "
      "SAPLHRPADINA1" or "LHRPADINA1U03"
      "HR_IN_GET_ALGRP_ELIG"
      or
      "SAPLHRPADINA1" "T500P_NOT_FOUND"
      or
      "RS_TESTFRAME_CALL " "T500P_NOT_FOUND"
      If you cannot solve the problem yourself and want to send an error
      notification to SAP, include the following information:
      1. The description of the current problem (short dump)
         To save the description, choose "System->List->Save->Local File
      (Unconverted)".
      2. Corresponding system log
         Display the system log by calling transaction SM21.
         Restrict the time interval to 10 minutes before and five minutes
      after the short dump. Then choose "System->List->Save->Local File
      (Unconverted)".
      3. If the problem occurs in a problem of your own or a modified SAP
      program: The source code of the program
         In the editor, choose "Utilities->More
      Utilities->Upload/Download->Download".
      4. Details about the conditions under which the error occurred or which
      actions and input led to the error.
    nformation on where terminated
       Termination occurred in the ABAP program "SAPLHRPADINA1" - in
        "HR_IN_GET_ALGRP_ELIG".
       The main program was "RS_TESTFRAME_CALL ".
       In the source code you have the termination point in line 78
       of the (Include) program "LHRPADINA1U03".

  • Copying a transction

    Hi Friends,
    I have a requirement to Copy a standard transaction MFBF to ZMFBF and make changes to the custom one ZMFBF.
    Are there any shortcuts where i can copy all the screens and everything at the same time or do I have to copy each and everyscreen individually associated with it.
    Also after I copy it the changes would be,
    when the user enters dat in MFBF and saves it, what happens the fields are blank, however they want the previous data in some of the input fields.
    so where would I change the code for this...
    Any suggestions,
    Shejal.

    Hi,
    GOTO SE80, Choose Function Group, give name as BARM, Press enter, u get a list below, Right click on the top most text(BARM) and select copy, give a Zxx name in the target field, continue, it again ask to enter the target fields for different programs and includes, always give Z attached with the program name(ZSAPLBARM), after the copying process is over, goto tcode SE93 give ZMFBF and say create , select the first radio button, give short description and in the next screen give Program name as ZSAPLBARM and screen number as 800 and SAVE the transaction. now run ZMFBF, it works fine. Hope is issue is resolved, Please close the thread by marking usefull answers.
    Cheers...
    Santosh

Maybe you are looking for