Copy one query from one infocube to another infocube

Hi BW Experts,
Hope all of them are doing good.How can we copy one query from one infocube to another infocube.
I have infocube1 having one query ,I NEED to copy that query to infocube2? How?
Could you please help me out?
Thanks

Use transaction RSZC in BW (BTW you're addressing BW experts in a BO forum better post in the Bex section of the BW forum)

Similar Messages

Copying a query from one cube to another cube

HI BW Gurus,
I am having a report due date for net payment analysis in Accounts receivables and i want to copy the same query into a different infocube accounts payable.
Is it posssible to copy a query from one infocube to another infocube.
Regards,
Syed

Hi,
Yes,it is possible to copy query from one infoprovider to another infoprovider with some conditions.Please have a look at the note 981104 which explains you how to Copy between InfoProviders and Copy within one InfoProvider.
Rgds
Manoj Kumar

How to copy a query from one infoprovider to another infoprovider

Hi Experts,
Could anyone suggest me on how to copy a particular query from one infoprovider to another infoprovider which are identical and have the same objects in them.
Thanx in advance
Lalit

Hi Lalith,
Use the Transaction RSZC and specify the - > Source InfoCube -> Target InfoCube and select the queries you want to copy.
Hope it helps
Regards
Srikanth

Issues after copying a query from one IP to another

Hi Friends,
I have a query which was built on a infoset, i have built a multi provider with aditional objects apart from what i have in the infoset, i.e. this Multi provider has all the objects which are used in the query. I have copied the query from infoset onto the multi provider. All is well until this point.
but when i see the default values or free characteristics of this copied query, it still shows the objects with prefix of old infoset. Shouldn't it be having prefix of multi provider instead as this query is based on the Multi provider?.
Also when i save the query, i get a error message saying that XXX characteristic is not found in the info provider(MP), where as this cahr is available in the Multi provider.
Can someone pls guide me how to resolve this?.
Regards
BN

Hi,
I get an error message when i try to copy the existing query to the new Mulit Provider. This i get in Transaction RSZC after i give source Ino cube XXX and Target Info cube ZZZ and select Queries radio button and execute.
The error message what i am getting is as follows
InfoObject Source__F1 is missing in target info cube (Muti provider name).
like this i am getting for almost all the objects, but all these objects are available in the target.
Since, the query was a stright forward one i have created a new query exactly like the other one.But now i get another problem, i cant see the data in the report, even though there is data in DB. I checked the data on the Infoset and Multi Provider using Listcube.
Can you suggest what can i do here?
Regards
BN

Copy BEx Query from one SAP BI system to another SAP BI system?

Experts please help me to Copy a BEx Query from one SAP BI system to another SAP BI system?
Thanks in Advance.......

HI,
Just assume like below,
you are creating your query in Development server(BI),
Before creating query, you go to SE09(t code), here you create a workbench request by clicking the create button.
Give some description here to be identified by you in future.
Now a requested will be generated(ex: DW5K50098) with prefix of your server name.
now you go to query designer, you create query, when you save the query, it will ask you request, now you click button 'own request'. you choose request(create by you in SE09).
it will be saved under this request, now you will have one more request under your request in SE09
parent request(DW5K50098) and child request(DW5K50099).
First you click child request and relese(click lorry button in se09),second you click parent request and lorry button.
next steps will be related to your organization, you can ask your team leader, he will be taking care of it.
Regards,
Ranganath.

Copy ABAP query from one servert to another

Hi,
How to copy ABAP query(SQ01) to other servers.Here we have sandbox-dev-quality-and prod.Now a query is created in sandbox, so i need it to move to Dev and then to quality.So do we have any upload and download option for this or we need to copy the code from system-status.

Similar issue solved here.
Download Query SQ01/SQ02

How-to copy a query from a cube to another cube w/ the same structure?

Dear All,
Does anybody know if it is possible to copy a query, in the same system, from a cube to another cube (or multi-cube) which has the same structure?
Thanks!
Ioan

Hi Ioan,
Micheal is right.
also you can do this another way. from the main menu of BW go to Business Explorer---> Query -
> Copy.
Regards,
Reddy

Copy Query from One MultiProvider to Another

How easy is it to copy a Query from one MultiProvider to another?
thanks

If the elements of the query is not same try using following function module RSZ_I_COPY_QRY_TO_CUBE to copy queries
Re: Copying query structure to new infoprovider
Ravi

Copying a Single BEx Query from One Infoprovider to Another

Is it possible to copy just a single query from one Infoprovider to another?
I know how to copy all of them at once, but I want to know if there is a way to do it just for a single query.

Ah. That worked perfectly.
Awarding points.
Thank you.

Copy Query from one cube to another

Hi ,
Where can i do copy query from one to another cube
Thanks
Gururaj

Hi,
For copying queries from one cube to the another use Tcode :RSZC.
If you have RKF and CKF in the queries,
then only those RKF's and CKF's which are used in the query will be copied(Only those which you use in the structure).
One more important all the keyfigures will be copied with Technical name as _1 at the end.
i.e: if you have a KF called AVERAGE with Techname as <b>OSD_AVG</b> then this will be copied as <b>OSD_AVG_1</b>.Meaning you cannot define your own Tech names.
Thanks,
Uma Srinivasa Rao.

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

How to Move or Copy the Tables from One Database to Another Database ?

HI,
Can any one help me on this, How i can move or copy the tables from one database to another database in SQL server 2005 by using SQL query. Hope can anyone provide me the useful and valuable response.
Thanks
Gopi

Hello,
Maybe these links help you out
http://www.microsoft.com/downloads/en/details.aspx?familyid=56E5B1C5-BF17-42E0-A410-371A838E570A&displaylang=en
http://www.suite101.com/content/how-to-copy-a-sql-database-a193532
Also, you can just detach the database make a copy and move it to the new server.

How do I move or copy a page from one pages doc to another?

I used to frequently move or copy a page from one multiple-page Pages document to another just but dragging and dropping the thumbnail. Since I upgraded I can't do this anymore. How can I do it now?

Rhosh18 wrote:
I used to frequently move or copy a page from one multiple-page Pages document to another just but dragging and dropping the thumbnail. Since I upgraded I can't do this anymore. How can I do it now?
It never worked that way in Pages '09. You have to copy and paste the Thumbnails.
That no longer works in Pages 5. Sounds like you are not copying and pasting content because that certainly works. Read what VikingOS wrote and do precisely what he said.
Peter

Error while copying a page from one application to another application

Hi All
I am using Oracle Apex 4.0
I getting the error ORA-06502 Pl/Sql Numeric error character string buffer too small when i copying a page from one application to another application.
Thanks & Regards
Srikkanth.M

I'm having the same issue. How did you solve this?

How do I copy and paste from one page or file to another page or file - on the same screen?

How do I copy and paste from one page or file to another - on the same screen?

Open both of your images in the Editor. Click on the image you want to copy and press Ctrtl+A (select all) followed by Ctrl+C (copy) then click the tab for your other image and press Ctrl+V (paste)
Alternatively click on your background image then simply drag the second image from the photo/project bin and drop it into the main editor workspace on top of the background image. Use the move tool to position and the corner handles of the bounding box to scale.

Copy one query from one infocube to another infocube

Similar Messages

Maybe you are looking for