Copy options and palletes to different computers

I have several different computers that I use, but have problems finding some functions on the palletes because they are not the same (someone may have changed them). I have the same problem with the options that I have changed.
I know there is a file somewhere that can copied from computer to computer to duplicate the palletes and options, but cannot seem to find the message about it.
Does anyone know how to do this?
Thanks.
metzler CLAD

most of the settings of LabVIEW are stored in the LabVIEW.ini file located next to the labview.exe executable (c:
program files\national instruments\labview x.xxx\labview.ini).
The palettes are stored in the LabVIEW data\palettes folder. Per default the LabVIEW data folder is inside your documents folder.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

IPhoto and Aperture crash, different computers same, have rebuilt

I have a newer model iMac with lots of extra memory. Hardware shouldn't be an issue, and my drives all check out as fine. All formatted correctly. But after working in iPhoto for about 10 minutes (just renaming things, not even editing), it will crash, and on reload there will be grayed out events, sometimes with pictures in them that I can duplicate so it fixes everything and sometimes just empty, and photos are missing permanently. I am on a UPS, and I have current versions of all programs, most likely no conflicting software, no add ons. (I only use apple software and Diablo.)
I have tried rebuild, repair, permissions, etc. several times. I have tried running the library off a different drive, and on a different computer with a different user. Same problem. I tried the same thing with Iphoto Library Manager. It rebuilt fine, but then crashed after use.
I bought aperture thinking that might solve the issue, but it crashes too (far less often, like every hour or so instead of every 10 minutes) BUT even when not crashing it takes about 30 seconds of beachball just to rename a photo.
I bought a jpeg checker program to see if there were issues, and it found 10 or so corrupted photos. Not sure how to deal with this as you aren't supposed to modify the library directly in Finder, and I couldn't find the photos in iPhoto (same names as many other photos so not sure which is corrupt).
ANY SUGGESTIONS?
iPhoto had no problems about 6 months ago, but have been having serious problems last two months. Hadn't used it in between.
My library is very large (59,000 photos).

Next time it crashes post the crash log on here.

I have downloaded my purchases and or digital copy pass codes to two different computers, both of which are authorized to play my purchases. but not all of my purchases are on either one computer. some are on this computer some are on that computer. why c

please answer my question. why cant i see or play all of my purchese on either one computer?

Use Edit > Preferences > Store to configure both computers for automatic downloads of your purchases. For past purchases go to the iTunes Store and click the Purchased link in the right-hand column.
tt2

How to add games,music,and movies on different computers

Every one in my family got an iPod for Christmas and we are still trying to figure out how to use them.There are three computers under one account and they are all authorized.How do we download the games and movies/tv shows that have been purchased with the account on another computer?(example:There are 3 games and a couple of songs wanted on each computer so how do we get those on all 3 computers?)

How do we download the games and movies/tv shows that have been purchased with the account on another computer?
Right-click an item, find its location, copy it as well as the other content near it to another computer, and then drag that instance of it into the open iTunes window.
(39270)

Store music on a network drive and access from different computers

hi!
i have several mac's and windows pc's here and a windows server. i want to store my music on the server and let all itunes' access the same library to have ratings etc. all the same on all machines.
when i set the itunes folder to my network drive and open itunes it does not find any of my music.
my next idea was to run itunes on the server and to use the music sharing function but my macs can't access the windows itunes library because of some error -3259. my windows itunes can access the windows itunes without problems, the imacs itunes can't
anyhow its a bad solution when i have to sync my ipods with the server since this one is in the basement
does anybody know something about itunes libraries on a network drive ?
thanks a lot
philip

Hi !
Did nobody has developed a kind of sync tool yet ? Its interesting to know that the library is always stored locally. I think it should be possible then to copy the library from one computer to all others only the network name must be the same on all computers.
I'll try it

Moving a user back and forth between different computers.

My wife and I both have a MBP. When we are travelling together we like to take only one computer and would like to be able to move one user to the one computer we take, so we can both log in to our own desktop etc.
When coming home we would than migrate the user back to the own computer.
I have tried several methods, for example the Migration Assistant but they do not seem to work and make a mess of it. Any tips how this can be achieved?

OK, dwb
In our case both computers had the same account names:
same for me
DWB for me and BeyeB for her.
OK
By user directory, I mean I copy everything from the BeyeB folder of her computer to the BeyeB folder on my computer.
OK
BTW, while doing this, I'm logged into her account on my computer. No, I don't lose ownership of file and yes, all her prefs including desktop settings are kept.
Aha, I was doing it from my computer on my account.
so to be clear. connected over FW. you are on your computer in her user file, BeyeB. you get the files from user BeyeB on her computer to sync to your computer her user account BeyeB.
and that works? Files need replacing that might be in use? Do you need to log in and out after you sync to see changes?
Or do you mean the other way. you are on your computer and in user BeyeB and send the files to her computer user BeyeB?
this would make more sense to me. confusing or?

Copying photo and pasting into different project

this should be an easy one, yet i can't figure it out. i simply want to copy a photo in one project and paste the copy into another project. i don't want to move the photo.

Just hold down the option key while dragging from one project folder to another - this will copy it, make sure you have the actual project folder as the drop target.
Realize you rarely need to copy anything to make it show up somewhere - if you create an album anywhere you can chuck images into the album from anywhere else and they will not be copied but just displayed together.
RB

My ipod (4th generation) will not charge.I have tryed a wall cherger and charging on different computers.Nothing! what should i do?

help me my ipod 4th generation will not charge. i have tryed a wall ataptor an other computers.What should i do? Should i get a new ipod or should i try and get a new charger and see if that helps.It has not been changing for two weeks straight now .Help Please.

Either your USB cable for the charger has been damaged or the part of the iPod where you insert the USB cable is damaged. This usually happens due to water damage or carelessly removing the USB plug off from the iPod. Hope this clears some doubts
You might also wanna try and check with the Genius Bar at Apple, they usually know whats wrong.

How to work between adobe muse and dreamweaver in different computers?

Hi there,
i am working with muse and I have a dev who is helping with some code working in DW. I need to be able to update in muse and keep the same changes the developer mades in Dreamweaver.
What I have been doing to date is linking the business catalys to dreamweaver and it works till a certain stage.
I wish I could do all changes and then update but my ' boss' keeps changing mind on structure and look of the site
Kind regards
A

There is no backwards compatibility between Muse and Dreamweaver. You cannot mix the two programs.
Well, I shouldn't say you can't because you can but it is very tricky and depends on how you have it set up. If Dreamweaver has to make changes to the actual pages made in Muse you will break compatibility with Muse.

Printing from different computers using WIFI

I've got Wifi at home. My wife and I have different computers, I'm Mac and She's PC, and I'd like to set up wireless printing using the wifi. Can someone point me to a page that will educate me on how to do this? I remember seeing something about this capability in SnowLeopard, but I have no clue where to start.
Thanks
Bruce

bever,
Here is a good place to start:
http://support.apple.com/kb/HT3500
Regards,
Captfred

Browser freezes during page loading and then either shows the cause as silverlight, or flash to be the cause, on two different computers, since last 3 upgrades

Since the last three upgrades of Firefox the browser starts to load a web page then freezes. A pop up states that either silverlight or flash have stopped working. This can last for as long as two minutes before it continues to load, or for as little as five seconds.
I have tried various methods to cure this, by reinstalling silverlight, flash, and Firefox.
The only permanent cure is to revert back to an older version of Firefox. I would continue with an earlier version but I get sick and tired of popups from the likes of Yahoo, and yourself telling me to upgrade.
I have also put the the program back to basics, and this is a pain because when I find it's still the same I have to reload all the add ons. Maybe you could devise a method where we only need to click a button to put everything back as it was before resetting it to default.
This problem is occurring on two totally different computers, both running Intel gear, one i7 at 3.5, with 8 meg of ram, one core 2 duo with 4meg of ram, no drain from graphics cards as they all have their own ram.
i7 desktop Windows 7 Ultimate 64bit, and Dell XPS Laptop core 2 duo Windows 7 Ultimate 32bit both latest windows 7 versions

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

Can an iTunes library be copied and used on two computers?

Earlier this month I tried to get an answer to a problem I was having with using iTunes on two different computers. Stubaan, pqh and GregoryBurbidge tried to assist me (thanks, guys) but I did a poor job explaining my issue. I'll try again...
Several years ago, after running short of space on the internal hard drive of my 2003 iMac G4, I purchased a 250 GB iomega ext hard drive and moved the iTunes library to it. No problems, the songs played just fine.
I recently upgraded my old iMac with a 2.8 GHz Intel core 2 Duo. I added a 1TB external drive via Firewire to the new machine. I gave my old G4 and 250 GB to my daughter, but before I did that, I "clicked and dragged" the iTunes library from my old 250 GB hard drive to the new 1TB drive, hoping that all the songs we had on the original iMac/external drive could be used on the new machine/external drive. It appears that the library was copied over successfully, but iTunes in my new iMac can't locate songs when I try to play them (the dreaded ! sign). I've gone into the preferences and tried to choose the iTunes library folder on the new hard drive as the location, but "no go."
Is it even allowable to copy over the iTunes library and be able to play all the songs on both the "old" computer and the "new" one.

Chris, Roaming and Mike:
Thanks for your responses. To answer Chris' question, when I originally moved what I thought was the library from my old iMac G4 to to my first external hard drive, I did it using Preferences -- Advanced--Change Music Folder Location option. I renamed the Music Folder "iTunes Location" and "consolidated the library" onto my old external hard drive. That worked fine. It was that "Music Folder" (what I thought was the "library") that I copied over (clicked and dragged) from the old external hard drive to the new external hard drive. The problem arose when I disconnected the old external hard drive and tried to play songs on my new iMac. The songs came up as not being found.
Is it an "authorization" issue, or something else. Thanks again for your help.

HT1386 How many different computers can I sync my iPod with? My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer.

How many different computers can I sync my iPod with? My laptop crashed and was completely wiped clean and this was the machine that my iPod synced with so I don't know if it will be counted as a "new" computer when I sync my iPod.

You can sync with onee at a time. Syncing to another will erase the current content.
Copy everything from your backup copy of your old computer to your new one.

Downloading songs from two different computers, and not recognizing songs

On my home computer, I downloaded about 40 songs onto my IPod from CDs. Then, I installed the program on my work computer, and purchased four songs from ITunes. When I plug my IPod into my work computer, it is not recognizing the songs I downloaded from my home computer. However, if I plug my IPod into my work computer, I can listen to these four purchased songs, but once I try to listen to them without having it plugged into my work computer, only the songs I downloaded from home are on the IPod.
Has this happened to anyone else who has tried to put songs from two different computers onto their IPod?

Just to elaborate a bit, you need to copy the purchased files and put them on your home computer.
Don't burn them as an audio CD as you will lose quality when you re-import them.
You can use the Shuffle (instead of a CD) to do this
Check out this link.
http://docs.info.apple.com/article.html?artnum=61131

When I set (on two different computers) the Location Bar to "Nothing" it resets to "History and bookmarks" as soon as I close and reopen Firefox.

When I set (on two different computers) the Location Bar option: When using the location bar suggest: to "Nothing" it resets to "History and bookmarks" as soon as I close and reopen Firefox. I am using the latest vesion on Win8 on both computers. One has Bitdefender the othe McKafee. I have no obvious Addware, I use Iobit Uninstaller Advanced Care and and Driver manager on both computers. Until now I have always used Firefox as I refuse to use Explorer and I do not want to have to use Opera or another browser instead.
Can you please help?

Have you seen this general article: [[How to fix preferences that won't save]]?
Also, this might be a glitch with using automatic private browsing mode. Some settings changes might not be saved in that mode.
If all else fails, do you want to try a manual hack?
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This should launch a new window (Windows Explorer window) showing your current settings files.
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then open '''prefs.js''' in a text editor by right-clicking it and choosing Edit or Open With. (Double-clicking leads to Windows attempting to execute it, so I do not recommend that.)
Paste this at the end of the file on its own line:
user_pref("browser.urlbar.autocomplete.enabled", false);
Then save the file and close your editor.
Start Firefox back up again. Did the manual change work?

Copy options and palletes to different computers

Similar Messages

Maybe you are looking for