Copy/paste 23.976 timeline to 24 timeline leaves gaps in edits

Premiere 5.0.3
Windows 7
R3D Footage 23.976
Thanks in advance for any ideas/help.
(The reason for me doing this is explained below)
Here is what I am doing
1) Edited scene on 4k 23.976fps timeline
2) Selected all the edits and copied them
3) Created new 4k 24fps timeline
4) Pasted edits into new timeline
Doing so created partial frames and gaps at every edit (see image below)
Is there a way to move these edits over without creating the gaps and partial frames? Is there a way to remove all the gaps automatically?
REASON: If you have 23.976fps R3D file with embeded audio, the timecode is wrong. If you create a 24fps timeline then the timecode adjusts and displays correctly. I need the correct timecode so that I can sync audio and genereate edls. I didn't realize this bug until I had edited the entire project.
Here is a screen shot showing the play head on a partial frame and the gap created because of it.

Thanks, this is such bad timing! I am trying to get this edit wrapped up for a screening during the Cannes Film Festival and waiting until some unknown date in May-ish for 5.5 is not even an option. I am pulling my hair out... I can't even create EDLs, XMLs or AAFs because the timecode is wrong. I am stuck in premiere or forced to adjust the edits on 2.5hrs of footage on a 24fps timeline so I can export something. Of course my edits will be off here and there, but at least the timecode will be correct.
The timecode error is the single most crippling bug that I have run into in my 10 years of using adobe software.

Similar Messages

  • Final Cut Pro 7: Copying/pasting clips in timeline w/o overwriting

    How do I copy and paste clips in my timeline without overwriting the other clips? We know how to drag clips in the timeline (and do an insert edit), but this takes too long since we have dozens and dozens of clips already in our timeline. It's easier to be able to just copy and paste (or cut) but whenever we do this, when we paste the clip it automatically overwrites instead of inserting the clip at the playhead (and simply moving everything else down).
    We think we must be doing something very simple wrong or having some unknown box checked because it seems obvious that this should be something very easy to do in any editing program. It doesn't make sense that the default setting of Final Cut is to overwrite clips, right?

    This is the FCP-X forum, not the FCP-7 forum, but to answer your question -
    to paste copied clips into the timeline without overwriting, place the playhead where you want to place your copied clip(s) and type Shift-V instead of Command-V.
    MtD

  • Copy/Pasteing SD Timeline in to 720p HD Timeline...

    Hey folks,
    I've got a project in a SD timeline, it consists of images with motion keyframes in there, like a slide show kind of thing. There are also some that contain video as well.
    I need to output this project in 720p so I just created a new 720p timeline and copy / pasted the SD timeline in to the new 720p one.
    The images and video are obviously now much smaller in the larger 720p frame so I need to manually drag everything to fit, however, since there is motion keyframes, this throws the keyframing off on everything. Is there a way to automatically make all of the images and video scale to the size of the new, larger 720p frame?
    Thanks in advance!

    Right-click the sequence in the timeline and select "Open in Viewer", then go to the Motion tab. Scale.

  • How can I copy/paste text from one page to another?

    I feel like I am taking crazy pills... is there really no way to copy a text box (or group) from one page to another while creating books in Aperture 3?  Lets say I have my entire book laid out and I want to add one paragraph at the end on one page which will push text and photos down a half page or so... in most programs for the last decade or so they added really cool functionality... cut/paste...  It seems like the apple developers are aware of it because they are in the context menus but they don't work on text, only photo boxes.  Additionally, you can copy/paste text but it erases all formatting.
    Seriously, am I missing something?  I have trouble believing that they can't include this function.
    Anyone else have this issue?

    Update... it seems to only happen with text boxes which I create.  So when I try an existing theme I can cut/copy/paste just fine, but in that same theme if you edit the layout and add a new text box, I can't copy paste it anywhere... the options are in the menu but nothing happens.
    Thoughts? Solutions?
    I am running 3.4.3 on a MacBook Pro OS X 10.8.3

  • No copy & paste using muuse

    Why cant we use the mouse to copy and paste info (artsit, song names, etc.) in the search window of itunes or itunes store? I have to use the Edit menu at the top.

    > I searched this forum and noted two different files that
    could be deleted
    > to
    > correct this problem.
    > I deleted the first one;
    What was that one?
    > the second group of hidden *.dat files I don't find
    > on this (Windows XP Pro)
    > machine.
    It's there. You need to read the instructions for how to find
    it again.
    Quit DW.
    Find this folder -
    C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    (these folders are normally hidden - you may have to use
    Explorer > Tools >
    Folder Options to unhide them)
    or on Mac -
    Library/Application Support/Macromedia/Dreamweaver
    8/Configuration/MacFileCache-*.dat
    and delete it.
    Restart DW. Works better?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "sbell2200" <[email protected]> wrote in
    message
    news:eeo4b6$c69$[email protected]..
    >I purchased DW8 recently and since installing it, have no
    copy-paste
    >functions
    > within DW8.
    > I did leave DW MX installed on my machine, since I still
    might want to use
    > it
    > during a transition period.
    > So it wasn't an upgrade, it was a seperate/full install.
    >
    > I searched this forum and noted two different files that
    could be deleted
    > to
    > correct this problem.
    > I deleted the first one; the second group of hidden
    *.dat files I don't
    > find
    > on this (Windows XP Pro)
    > machine.
    >
    > Any help with this would be MOST appreciated! It is
    really hanging me up
    > on
    > getting going
    > with DW8... simple, but elusive! vexing.
    >
    > thanks, -steve
    >

  • Is there a way to copy & paste a clip from the timeline in one project in to another project?

    Hello Popular Premiere Pontificaters,
    I am using Premiere 6 on a Windows 7 machine.
    Is there a way to copy and paste a clip from the timeline in one project in to another project?... I can copy my clip, but when I open the other project, it will not allow me to paste it in there... but I am able to copy and paste a clip within a single project.  I tried everything... pasting in to a new video track and pasting in to an existing video track in the second project, but the paste option simply isn't there when I open the second project.
    And if Premiere itself will not allow me to do this in any way, will a copy-paste clipboard type of accessory app allow me to do this?... if so, which is the best, trustworthy copy-paste app that is malware free?
    Thanks,
    digi

    Hi Bill Hunt,
    I just read the page that you provided about "Handles"... thanks allot for that ARTICLE.  In your article and the subsequent article HANDLES, "Transitions Overview: applying transitions" linked from your article, it indicates (in PrE and PrPro anyway - I'm in Premiere 6) that transitions can be applied to non-Video 1 tracks... the paragraph below is a quote from that "Transitions Overview: applying transitions" article...
    "Whatever is below the transition in a Timeline panel appears in the transparent portion of the transition (the portion of the effect that would display frames from the adjacent clip in a two-sided transition). If the clip is on Video 1 or has no clips beneath it, the transparent portions display black. If the clip is on a track above another clip, the lower clip is shown through the transition, making it look like a double-sided transition."
    So this indicates that transitions can be applied to non-Video 1 tracks since it is referring to content in tracks beneath a transparent fade that would show through... and only non-Video 1 tracks can be transparent and have other clips "beneath" them in the timeline, right?
    In the screenshot sample in your article at this LINK, I see the handles (referred to as B and E) and I can see in my monitor window how those handles would be represented by the two little bracket symbols {  }  ... you can see how they appear in my monitor window in Premiere 6 in this screenshot, and below, from a different thread that isn't related to this topic.
    But I'm still trying to figure out how the handles can be applied in the non-Video 1 tracks in the timeline to insert a transition (cross-dissolve) between two clips.
    Can you advise me on this?... I posted a separate thread HERE on this topic, but I haven't got any further with finding an answer.
    Thanks so much for your article,
    digi

  • I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

    You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
    This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

  • COPY/PASTING timeline marker ???

    Hi,
    can you copy/paste also timeline markers when you copy/paste parts of a timeline to another? How ?
    I've checked to index of PP3 help butfound nothing.
    PP3 seems pretty primitive regarding markers maleability... :(
    Thank you.

    aye. Get jEdit and hit "reformat buffer".But that doesn't work properly if there are any comments in the code.
    I agree that it is a pretty annoying problem. Sometimes I do this:
    1) Click "Reply"
    2) Click "Quote original"
    3) Copy the code
    4) Paste it into Emacs
    5) Using "kill-rectangle" to remove the leading > from each line
    6) Paste it into Eclipse.

  • Extend the timeline by copy paste

    I'd like to copy and paste a set of keyframes and frames at the end of the exisiting timeline... maybe several times to extend the timeline.
    However I've been a bit flumoxed as to how a simple chore like that is done.  It does not appear one can copy the frames, then set the cursor at the end and past the frames ahead of cursor,
    Or do I have to create multiple layers to get the same effect by placeing them end to end down the timeline.
    In the included screen shot, I'd like to copy/paste the frames on layer1 on down the time line but still on layer 1.
    As you can see I've started using layers to create the same effect... but is that really the way to do it?

    meglomor wrote:
    click on frame 1 of layer one
    hold down shift and click on the last frame in layer 1
    (the entire span of tweens and keyframes will be selected)
    release the mouse and shift
    hold down pc:ALT mac: Option and click anywhere in the selected/highlighted tween span and drag the frames to the right.
    this technique will work on multiple layers as well.
    Ahhh cool.  A little different than some applications but still sort of obvious now I see how its done.
    Thanks

  • Feature Request: Disable target tabs setting destination for copy paste

    It might have seemed like a good idea at the time but pasting to the targeted layer causes way more problems than it solves. If for instance if I have 10 video tracks which is quite common and wanted to copy and paste a clip to track 10, I have to turn off the target buttons on all 9 tracks below to do that. I do know about option drag which works but sometimes if you're zoomed out you can't get a hold of the clip you are trying to copy. Also I may need one of those layers to help me copy to the right time but now next edit function doesn't stop on them anymore.
    What is important is being able to select which tracks you want PPro to stop at when you hit the next edit keys. For instance if I'm doing a color pass I don't want to stop on audio edits or gfx edits. So If I go through that whole process of turning these things off just to clone a clip I then have to turn them all back on. IMO it doesn't make sense to share these two functions with the target buttons and it's just too tedious in the first place to use the target buttons to set paste destination.
    What I think would make sense would be an option that says copy paste follows target selection or copy paste to same layer. Then the target buttons would mainly effect which media in your timeline you want to focus on which is way more important IMO. This could also be done with an extra keyboard function. IE paste to same track or paste to targeted track and have both functions available.
    Also I think you should have the option of stopping on the ins and outs with the next edit buttons. It's very common to use an in or out as a quick marker for a point in the timeline where there isn't an edit yet.

    Yes I know about alt dragging. Not so great to copy a one second clip in an hour long seq way down. That's the point of it. As it is now it will likely copy to a different track then you want it to so you have to go over and start clicking all kinds of buttons to get the thing to not over write something and maybe / probably all off or all on for the target buttons is nothing close to what you need and you had the buttons how you wanted in the first place. And after you paste you have to click more buttons to set that up again.
    So for one: this method of targeted copy / paste is not efficient at all, and two: sharing two totally different functions for the target buttons is not a good idea. A very simple fix is to provide the option of copy / paste to same tracks.
    This is an opportunity to do it better than FCP because FCP would copy and paste to the same tracks but it had very bad control over which edits the program stopped on using the next / prev edit keys. It's much more efficient to only stop on the video edits and usually one or two tracks when doing a color pass. In FCP you had to disable the audio tracks to get it to ignore them so that you're not pushing the up and down buttons 5 times more than necessary but then you couldn't hear the audio. When you're doing color you want to hit the button once and be on the next shot. With my suggestion you get to focus on exactly what you want and copy / paste isn't a button-fest. This is like golf. Fewer strokes wins!

  • Copy/Paste won't work between PrePro and AE

    Hello,
    I'm working with 720p MXF clips from an HVX200, and I'm trying to copy from Premiere into AE. It won't let me paste into AE.
    I've tried using a Dynamic Link, but that makes no difference.
    Thank you in advance!
    Adobe Production Premium CS3
    Windows Vista
    Core 2 Quad 2.5GHz
    4GB ram
    GeForce 9800GT

    A couple of things:
    - If you're using Dynamic Link, you don't need to also use copy and paste. Dynamic Link is a totally separate (and usually much, much better) way of moving data between the two applications.
    - As described on this page, you don't paste into the Composition panel in After Effects. You can paste from one Timeline panel to the other Timeline panel, or you can paste from one Project panel to the other.
    I think that the first point is the more important one here: If you're using Dynamic Link, forget about copying and pasting between the two applications.
    It seems, from your description of what you're trying to do, that you should use the first procedure on this page to replace your clip(s) with an After Effects composition in Premiere Pro and---and this is the important part---automatically create a composition in After Effects that contains the clips from Premiere Pro.

  • Finished sequences is wrong timebase, cant copy paste into new sequence

    I am coming onto a project finishing it for a first time editor and he cut 23.97 footage in a 29.99 seq, there are many time effects etc. I tried copy/pasting into a new seq but everything ends up in different places. I cant change my seq settings as it is grayed out, this is outside the realm of my experience any advice would be much appreciated! Cheers.

    Different timebase...OOOCHIE! This is what people get for not paying attention, and what happens with the OPEN TIMELINE being able to edit almost any format. People don't see the RENDER BAR and just carry on...ugh.
    Nothing to do but to copy and paste into a correct timebase, and manually close all the gaps. *****, but what you need to do. Been there....cleaning up after an editor.
    Shane

  • Can't copy paste opacity animation

    All-
    I am unable to copy paste opacity animations in Edge while inside the symbol.
    I can copy paste other animations like x y while in the symbol but not opacity
    The work around is to redo the animation at the point where needed
    Am i missing something?

    Hi there,
    takehigoproject wrote:
    Please tell us how copy paste symbol animations to different timeline or other symbol?
    Edit > Paste Special > Paste All.
    hth,
    Joe

  • Copy/paste clips from a library/project to another copying media on the new library

    I want to copy/paste some clips from a project timeline to another but COPYING MEDIA also on the second library/project. How can I do?

    I'm in the project  "Anima mia" (which is together with an event in a library: all with the same name "Anima mia"). I want to pick up FROM THE TIMELINE some audio clips (which are the edited part of bigger clips placed in the browser) and some video clips (which are the edited part of bigger clips placed in the browser) and copy them on a new Project called "Riferimento" (which is with an event inside a library: all with the same name "Riferimento"), and I want to copy also the concerning original files to the new library. But I can't, infact if I copy/paste these clips in the new project/library I get this
    I'd like to choose if leaving the original media in the source library or if phisical copying them to the new library. But it doesn't seems possible here....
    Is it clear?

  • Copy-pasting and lifting audio between projects--no playback

    Hello everyone,
    Every time I copy paste or lift audio from one project to another (i.e. copy, save project 1, close, open project 2, paste), the audio works fine for that session but ceases to play back when I reopen the project later. The audio in the project media / clip selection area will work just fine, but when I double-click on the clip I pasted in the timeline, the clip preview window shows a red field and no audio. This basically means that I'm losing all the edits I made in project 1 and having to re-insert each piece of audio into the project 2 timeline and redo my edits. What's the problem? Is there any way I can copy-paste audio from one project timeline to another?
    (Edit:) I'm using CS6.
    Thanks very much,
    Josh
    Message was edited by: jmclaurin14

    It  wont work  that way because you are playing it out of the Clipboard. which is temporary.
    Usemultiple  Sequences in the same Project instead if you want to do that. to different edits

Maybe you are looking for