Copy, paste and crash in Keynote. I've seen a lot of postings with the same problem. Is there a solution or fix? I'm using keynote 9 v5.1.1
I've seen a lot of postings about keynote crashing when doing simple copy and paste. I have the same problem, Keynote 9 v5.1.1 Is there a fix?
I had the same problem with the LCD after replacing hinges and could not figure this out.
To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery. I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up...........
Similar Messages
-
I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
Any idea what I can do to fix this?you can connect the iPod to iTunes in recovery mode:
Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes) -
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
-
Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...
Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.
-
I just got tOhe iPhone 4Gs today and had contacts and photos uploaded from another phone synced new phone with iTunes for music and accidentally restored it so all my old iPhone stuff is on the new one is there any way to fix this ?! Please help !!!!
Could you be more specific about what exactly do you want to fix now?
-
I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?
I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
2.- Replace an expensive part of the screen (about $900)
3.- Try with an external monitor to see if the problem was the screen or something else
What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
So that´s that, I hope someone finds this helpful
P.S. Sorry if my english it´s not that good -
I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.
Disable all Firewalls & Anti-Virus software...try again.
-
I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?
I just updated the software on my Apple TV, and now the closed captioning is not working. Somebody had the same problem? Anybody knows how to fix it?
-
Everytime I try to open firefox, it just doesnt open up. no matter how many times I click it. I tried uninstalling it and reinstalling it, but it continues with the same problem. what should I do?
You can disable autoupdate by following these steps:
Go to main menu > Tools > Options > click on Advanced tab > click on Update tab and then click on the round radio button that says ''Never check for updates (not recommended: security risk)''
Refer the attached screenshot -
i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?
Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. -
every time i want to update my phone, i see an alart message saying that the firmware file is corrupted...what do i do now....i am using 5.1.1 and it is jailbroked.......i face the same problem while restoring......plz help.....TOUFIQ
Jailbroken phoned are not supported here. Anything could be wrong with it - it is jailbroken.
-
I have recently purchased an Iphone 4s white 16GB. When camera is used with a flash the picture is white and hazzy. Anyone with the same problem?
Yep. Exchanged for black and that solved it. Too much light leaks through the glass on the white phone.
-
After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
My partner and I both have iPhone 5s and an iPad. We registered all three products with the same iTunes account as we download music and movies together. I have noticed when my partner sends me a message it also appears on my phone that I have sent it AND recieved it. The same goes for when I text him. I send the message to his phone and my phone also recieves it. Facetime does the same thing. Its very strange. Does any one know what I can do to stop this from happening?
To stop this, don't use the same Apple ID on both phones for iMessage and FaceTime. (You can continue to use the same ID for iTunes; it doesn't need to be the same as the ID used for iMessage or FaceTime.)
On one of the phones, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Then do the same thing in Settings>FaceTime. -
Message and no sounds - anyone with the same problem?
Hi,
since a few days I have always the same message (usually after I switched on the iPhone or after the iPhone was in the docking station and I took it out of the docking station):
"This accessory is not made to work with iPhone. Would you like to turn into airplane modus to reduce audio interference? You would not be able to make or receive calls."
After I pushed the button "NO" all the sounds are gone and I'm not able to hear iPod or YouTube without headphones. And people can't hear me very good, when I'm talking to them.
During the day the iPhone suddenly turns on, then I will get the above-mentioned message, I have to choose between yes or no and then the iPhone turns off.
I don't know what to do and why I have this message since a few days. I did a reset with iTunes several times now, but I have still the same problem.
Thanks for your help!
KatrinSounds like either the 30pin connector at bottom (where you plug in) is either failing (has an issue of sorts) or could just be dirty. Clean it up a bit (remove any lint) and see if it continues. If still an issue, make Appt at AppleStore or call 1-800-MY-IPHONE to have it fixed.
Maybe you are looking for
-
Unable To Pass Input Page Parameter Using PageDef File.
Dear All, I am currently exploring task flows as I dont have that much knowledge in it. Here's my use case 1. I setup a taskflow which has a Method Call and a View Activity in it. 2. The method call is a default activity which just calls a web servic
-
Hi, facing issues with role comparison in SUIM in ECC 6.0 did cross system ( DEV - PRD) comparison of role. if any authorization object is missing, it will show red signal, yellow if diffeent values of the field now problem is when i drill down furth
-
Trouble Syncing My New Ipod Touch
I cannot get my Ipod Touch to sync.I connect the Touch to my computer and I get the error message "iTunes could not connect to the iTunes store. The connection timed out. Make sure your network settings are correct and your network connection is acti
-
hi everyone, I've got text in a text box that is being converted to an image for some reason - actually I think I know why... The text has links in it! Text without links in it is ok - fine. Text with links - uh oh - make all links images! and if the
-
Security filter setup missing in one of the planning applications
We noticed recently that our users in one of the planning applications were not able to access any data. Then we noticed that the entire security filter setup went missing/wipped out for that application and had to set up manually and then a security