Copy/paste clips from a library/project to another copying media on the new library

I want to copy/paste some clips from a project timeline to another but COPYING MEDIA also on the second library/project. How can I do?

I'm in the project "Anima mia" (which is together with an event in a library: all with the same name "Anima mia"). I want to pick up FROM THE TIMELINE some audio clips (which are the edited part of bigger clips placed in the browser) and some video clips (which are the edited part of bigger clips placed in the browser) and copy them on a new Project called "Riferimento" (which is with an event inside a library: all with the same name "Riferimento"), and I want to copy also the concerning original files to the new library. But I can't, infact if I copy/paste these clips in the new project/library I get this
I'd like to choose if leaving the original media in the source library or if phisical copying them to the new library. But it doesn't seems possible here....
Is it clear?

Similar Messages

Is it possible to copy paste from one GarageBand project to another?

I would like to move some of the audio tracks I recorded in another project to my current project in which I have some other recorded stuff.

makeshiftuser wrote:
Is it possible to copy paste from one GarageBand project to another?
yes. skim the tutorial on rescuing damaged files to see the procedure:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrescuinggaragebandfiles
(Let the page FULLY load. The link to your answer is at the top of your screen)

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

A video clip import for a new project keeps showing up as a clip from an older project.

So here's the issue, I succesfully imported and trimmed 95% of the video clips from my GoPro today. However, when I upload the piece de resistance, it shows up as a clip from an older project that I've already deleted. Despite showing me the older clip in the imported section, I can still play approximately 1/3 of the actual, new clip. Problem is it stops and doesn't allow me to work with the remaining footage. I've tried importing it straight from the SD card, copying it to the desktop first, etc. No luck. Any advice?

So, it's Photoshop CS3.
Anyway, from what I understood, you open the photo directly form the disk in Photoshop. That is, you don't use Lightroom to open the photo in Photoshop. It just doesn't work this way. As I said above, Lightroom has no way of knowing when to import a photo that has been saved in Photoshop.
If you insist on using Jpegs for derivative files, your best way to go is indeed using Synchronize.
However, I'd advice to use a lossless format, like TIFF or PSD. Why leave image quality on the table (as Jeff Schewe likes to say)? Storage is cheap and you're editing only your best photos in Photoshop anyway.
And as an additional benefit, you can automate the process of importing derivatives:
Configure what file type to use in Prefs: TIFF or PSD, bit depth, color space etc.
Select an image in Lightroom and hit Ctrl+E.
The derivative file is created in the chosen format and opened in Photoshop.
Edit and save in Photoshop.
Voila! Your edited derivative is already in Lightroom.

I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

Making simple Cross desolves at the end of still photo clips from my library. Not making a clean disolve beteen. Single frames from the previous clip are flashing half way through the desolve. Did both a drag and drop and insert disolve.

Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve.

Making simple cross desolves at the end of still photo clips from my library.
Not making a clean disolve between clips.
Single frames from the previous clip are flashing half way through the desolve.
Did both a drag and drop and insert disolve.

Unable to paste clips from source monitor into the timeline with buttons

hi,
working with the newest version of premiere pro cc 2014.
I'am unable to paste clips from the source monitor into the timeline by neither using the buttons below the source monitor nor hitting the shortcut "," .
dragging the clip in the timeline still works... is there a hidden setting to enable this functions again or is it a bug?
thanks in advance
yannick

Thanks a lot!
Further Information: Adobe Premiere Pro Help | Source patching and track targeting

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itumr dongs come up. How do I get my original itunes library?

I just purchased a new computer and downloaded I tunes but when I go to sync my iphone and ipad touch my library from my old computer doesn't show up on the new one. Only the purchased itune songs come up. How do I get my original itunes library?

Have you copied your content over from your old computer and onto the new on ? If not, and you still have your old computer, then there a number of methods described on this page which you can use to copy your library over : http://support.apple.com/kb/HT4527 . If you no longer have your old computer then have you got a backup of your content that you can copy onto the new computer and add into iTunes ?

In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section. After doing so, I received a message that my event is already open with the same identifier as the new one I just creat

In Final Cut Pro I was trying to move an Event Library from one hard drive to another as explained in the Help section. After doing so, I received a message that my event is already open with the same identifier as the new one I just created on the new disk. It says the second document cannot be opened and to move one of these documents out of your Final Cut Events folder. It also says to avoid this problem, copy events from within Final Cut Pro, but that is what I did in the first place. What should I do to avoid the double opening conflict?

What exactly are you doing and what version are you using with OS X 10.8?

Can I move/copy songs from one itunes account to another itunes account on the same iMac?

Can I move/copy songs from one itunes account to another itunes account on the same iMac?

You move the song files to /Users/Shared/ and then into iTunes from the other Mac OS X user account.
If you want to change the iTunes Store account associated with them, you need to redownload them from that account.
(60812)

Dear CCC, Hi, I bought a refurbished Macbook 4,1 at present it is running Lion 10.7.5( although it is an older machine circa 2008) I would like to transfer everything from my old machine( early intel Macbook Pro) to the newer machine. My older machine run

Dear Friends,
Hi, I bought a refurbished Macbook 4,1 at present it is running Lion 10.7.5( although it is an older machine circa 2008) I would like to transfer everything from my old machine( early intel Macbook Pro) to the newer machine. My older machine runs Mac OS x 10.6.8 and that allows me run some very old software. Should I make a time machine back up?and restore from that or use Carbon Copy Cloner? to transfer everything, the system, applications and data.
Thanks for your help
-Walt

Here you go:
Connect the two using a Firewire cable. Boot the newer machine in Target Disk Mode. Boot the older one normally. The disk for the newer machine will appear on the older machines's Desktop.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select newer machine's hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
Clone using Restore Option of Disk Utility
1. Select the destination volume from the left side list.
2. Click on the Restore tab in the DU main window.
3. Select the destination volume from the left side list and drag
it to the Destination entry field.
4. Select the source volume from the left side list and drag it to
the Source entry field.
5. Double-check you got it right, then click on the Restore button.
Destination means the newer machine's drive. Source means the internal startup drive.

HT4623 I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select General there is no Software Update button to choose from. How do i update my Ipod to the new IOS system?

I have a Gen 4 Ipod Touch, it is still running with IOS 4. When i go to my settings and select <General> there is no <Software Update> button to choose from. How do i update my Ipod to the new IOS system?

You have to hook it up to a computer and update it to ios 5 and then there will be a "software update" button.

HT1766 If I restore my new iphone from my last backup will it delete all of the new things that i have on my phone

If i restore my new iphone from my last backup will it delete all of the new content that I currently have on my phone? would it be better off to set it up as a new iphone? and if i set it up as a new iphone what will that do?

If you restore from your last backup, it will replace what you now have on your phone. If you set it up as new, you will have a phone just out of the box without any of your data on it. You can download any apps again. You can sync your music through iTunes.

Can You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

How do You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

Move the files to the /Users/Shared/ folder and then to the other account's home folder.
(85927)

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

I bought a mac air retina to replace a mac pro. How can I get all files of the back up and copy them to the new mac?

Mail window may be in the Full Screen mode.
Move the mouse pointer to the top right corner of the Mail window and hold it there.
Menu bar should drop down and click the blue double arrow icon.
Full Screen toggle shortcut: control + command + F

Copy/paste clips from a library/project to another copying media on the new library

Similar Messages

Maybe you are looking for