Copy paste color doesn't work?

Copying and pasting background colors of boxes doesn't appear to work. Any workarounds?

Well I read the forum rules and it doesn't say
anything about not using URGENT. Sounds like you are
going based on convention.Consider basic good manners. You have just approached a bunch of strangers and asked them for their help, for free. By telling us it's urgent, you're really saying "my problem is more important than these other people asking for help", which is only true as far as you're concerned. Everyone considers their own problem more important.
The forum rules may not say anything about not using "URGENT", but since the people answering the questions have the power to do so or not, you just have to abide by what they say. Like it or lump it, basically. Or cough up some hard currency

Similar Messages

Copy/paste style doesn't work for conditional formatting with cell refs

I created a conditional format on a cell (B3) that compares its value to the value of a cell above it (B2).
If I 'Copy Style' and paste that style into the cell beside it (C3), the conditional formatting still refers to B2. If I want to do this for a whole row of cells then I have to manually edit the cell reference in the conditional formatting for each cell.
Anyone else seen this behaviour? It makes me think of going back to Excel.

Don't know if you'd consider this a 'workaround' or simply a way to do what the OP asks with as little fuss as possible.
I created a conditional format on a cell (B3) that compares its value to the value of a cell above it (B2).
If I 'Copy Style' and paste that style into the cell beside it (C3), the conditional formatting still refers to B2...
The desire is to have each cell in row 3 formatted depending on a comparison with the cell directly above it. If each comparison is the same (eg, Equal to), and the 'true' action for each is the same (eg. Fill with yellow), the following will save some effort:
Select the whole row, B3:G3 (or further).
Set the conditional format rule to
Equal to | B2
And the action for Fill yellow.
Click Done.
With the conditional formatting dialogue still open, select C3. You may also want to move the dialogue window up to just below row 3.
Repeat these three steps:
Click on the B2 reference in the dialogue.
Click on cell C2 in the table.
Press the right arrow to move the selection to D3.
Click on the B2 reference in the dialogue.
Click on cell D2 in the table.
Press the right arrow to move the selection to E3.
etc.
Regards,
Barry

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case)

Safari copy url button doesn't work

I just upgraded from an ipad2 to an iPad air 2. Before, if I wanted to copy and paste a url I'd use the copy button. Now,on the new iPad air 2, the copy button just wipes out whatever I've previously copied, and doesn't copy the url.

You tap and hold down in the URL field until you get the option to select all. Then you choose the option to select all. An option to Copy appears and you select that and then you should be able to paste that URL into a text field.
Safari copy url button doesn't work
I Realize that you must know the steps but I am just double checking. If that is not working for you, and you are not having copy and paste issues elsewhere in other apps, I would try clearing Safari, force close it and then reset your iPad.
Go to Settings>Safari>Clear History and Website Data
Now force close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Copy paste function no longer works on my mac pro, copy paste function no longer works on my mac pro

My copy paste function no longer works on my mac book pro. How can I reinstate it?
Thank you

Try restarting the computer.

Copy/Paste function no longer works in iOS5?

Just upgraded to iOS5 last night, and I just noticed I can no longer copy/paste from Safari to Office HD. It goes through all the motions, but there is no text pasted. I tried rebooting, same deal. I can paste the text in notes, but it doesn't work in Office. Fix anyone?

I too am having the same problem copying and pasting from safari after upgrading to ios5. I am able to copy and paste from normal web pages, it is when I attempt to copy and paste from a website that is using java script.
When I go to any other program and paste it does not paste the information from the java script page but continues to paste the information from a regular web page.
I had no problem copying and pasting from JavaScript pages before the upgrade to ios5. I have tried to turn off JavaScript in the settings with no avail.

Copy/Paste functionlity is not working in oracle forms 11g

Hi All,
We are using custom built big application (oracle 11g/forms 11g).
1. And few user are not able to copy/paste from oracle forms 11g to winword.And its random sometime they can ,sometime they can't .
2. If they have problem means they have copy/paste issue and (When we close application and run it again it is working fine)
3.it's random we are not able to re-produce in development environment.
What i noticed both user have problem and both are using left hand mouse ,generally we use left/right they are using right/left.
Here the Environment Detail:
Java runtime :1.6.0_26
Weblogic server
oracle forms 11g
So just wondering is there any changes required. Seniors/Guru please advise.
Thanks!

It is very important to make clear which direction you are going. If you are not able to copy from Forms and paste to an external application, this could be any one or more of the following:
1. There is a problem with the JRE. Consider uninstalling ALL currentlly installed JREs and install the latest supported version 1.6.0_33
2. There may have been an issue with the Forms version you are using. Be sure you are using 11.1.1.6 or 11.1.2.0. If not, install the latest patch.
3. The JRE was unable to properly identify or store the digitial signature in the Forms jar file or one which you included (custom code). If you are using any customer jar files, ensure that they have been properly signed. Also be sure that JRE cache is being stored on the local client machine and not a remote location as this is not supported. If you have not altered the default, the cache is stored in the user's home directory under Application Data (AppData for Win7)
4. Could be a mouse driver issue. Go to the mouse vendor's web site and get the latest driver for that mouse. Do not use the MS drivers.
Example:
C:\Users\<USER NAME>\AppData\LocalLow\Sun\Java\Deployment\cache
So, recommendations:
1. Uninstall all JRE versions currently installed. Install 1.6.0_33
2. Ensure that you are using 11.1.1.6 or 11.1.2.0
3. Clear the JRE cache. To do this close ALL open browsers and open the Java Control Panel. Look on the General tab for Temporary Internet Files > Settings > Delete Files > Ok
4. Install the latest mouse driver.
5. Retest
Edited by: Michael Ferrante (Oracle) on Jul 25, 2012 2:58 PM

Premiere CC 2014 - Copy/pasting effects doesn't maintain stacking order

For as long as I can remember Premiere doesn't seem to honour/maintain the stacking order of effects when you copy them from one clip to another. This is an absolutely huge issue as most people perfect their video/audio effects on a sample clip and then copy to the others. But what is the point of that process if the copy/paste command rearranges the stack order of the effects!
For example I generally use Dynamics, EQ and Volume effects on my audio to add some compression and level out my audio. The levels that the Dynamics is taking as 'input' is very important so EQ and Volume effects are most often stacked on after the results from the Dynamics has been spat out. Yet, when I copy/paste my perfected order and settings, Dynamics always drops to the bottom of the stack which produces a vastly different audio result.
I then need to individually move the Dynamics effect back up the stack on every single clip that I've pasted my settings to. This is a really horrible bug/oversight. While on the topic of bugs, when you add 'Volume' effect to a custom favourites bin, it seems to not be able to be applied from here on subsequent restarts of Premiere.
Or am I missing something in the copy/paste process regarding maintaining the effects stack???
Lance

Thanks Mark!
I was selecting the individual effects from the clip within the 'Effect Controls' panel and then using the old CMD+C then CMD+V method to copy paste. This does indeed corrupt the stack order.
Selecting 'Copy' from the right-click menu when clicking on a clip, and then subsequently using the 'Paste Attributes' option from the right-click menu when pasting on a clip/s does maintain stack order, so thank you for this information.
I would assume that the first method would seem the intuitive option for most people, so it would be great to see the layer stack order maintained regardless of which method you use to copy/paste effects.
Thanks again.
Lance

JTabbedPane background color doesn't work in Win XP - SP 1 with JRE 1.4.2

Setting background color for JTabbedPane doesn't
work in "Windows XP with SP 1" when using JRE 1.4.2.
For example, following call doesn't set the
tab to green:
tabbedPane.setBackgroundAt(0, Color.green);
It always displays TABS with the white background.
Is anybody aware of this problem?
Thanks-in-advance for any help / suggestions!
Sundar

Thanks, bbritta and vairavan.
I tried setOpaque also, but still doesn't work,
On my system also:
UIManager.getSystemLookAndFeelClassName() = com.sun.java.swing.plaf.windows.WindowsLookAndFeel
I have given below the sample code that doesn't display tab color. Please let me know if you suspect something is wrong here, or any suggestions to make this work under Windows XP - Service Pack 1.
Thanks,
Sundar
// CODE STARTS HERE
import javax.swing.JTabbedPane;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.UIManager;
import java.awt.*;
import java.awt.event.*;
public class TEMP_TABBED_PANE extends JPanel {
public TEMP_TABBED_PANE() {
JTabbedPane tabbedPane = new JTabbedPane();
     tabbedPane.setOpaque(true);
Component panel1 = makeTextPanel("Howdy");
tabbedPane.addTab("One", panel1);
tabbedPane.setSelectedIndex(0);
tabbedPane.setBackgroundAt(0, Color.green);
Component panel2 = makeTextPanel("Howdy Howdy");
tabbedPane.addTab("Two", panel2);
tabbedPane.setBackgroundAt(1, Color.yellow);
Component panel3 = makeTextPanel("Howdy Howdy Howdy");
tabbedPane.addTab("Three", panel3);
tabbedPane.setBackgroundAt(2, Color.red);
Component panel4 = makeTextPanel("Howdy Howdy Howdy Howdy");
tabbedPane.addTab("Four", panel4);
tabbedPane.setBackgroundAt(3, Color.cyan);
//Add the tabbed pane to this panel.
setLayout(new GridLayout(1, 1));
add(tabbedPane);
protected Component makeTextPanel(String text) {
JPanel panel = new JPanel(false);
JLabel filler = new JLabel(text);
filler.setHorizontalAlignment(JLabel.CENTER);
panel.setLayout(new GridLayout(1, 1));
panel.add(filler);
//panel.setOpaque(true); <<-- UNCOMMENTING THIS ALSO DOESN'T HELP :(
return panel;
public static void main(String[] args) {
JFrame frame = new JFrame("Tabbed Pane Demo for Color");
try {
UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
// UIManager.setLookAndFeel(UIManager.getCrossPlatformLookAndFeelClassName());
JOptionPane.showMessageDialog(frame,
          "UIManager.getSystemLookAndFeelClassName() = " +
          UIManager.getSystemLookAndFeelClassName(),
          "Look And Feel",
          JOptionPane.INFORMATION_MESSAGE);
catch(Exception e) {
e.printStackTrace();
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {System.exit(0);}
frame.getContentPane().add(new TEMP_TABBED_PANE(),
BorderLayout.CENTER);
frame.setSize(400, 125);
frame.setVisible(true);
// CODE ENDS HERE

The mouse right-click (to copy-paste) menu does not work correctly.

The mouse right-click copy-paste menu often fails in Firefox 4. If I highlight something to copy and then use the mouse to right-click on it, the menu will appear down and to the right. Second, the highlighted command (i.e. copy, paste, etc) will be two steps beneath the mouse pointer. Third, if one chooses "copy" for example, your highlighted text might or might not (usually Not) be copied. This works as expected (perfectly) on this Firefox site, but fails on all other web pages. Note: This is a "company computer" where I am not an administrator.

I am the admin on my PC, and I am not able to select the copy page after I have highlighted an area. I can if a link select copy link, but in short no more copy paste feature on this new Firefox.

Excel copy / paste function does not work with Smartview

We recently upgraded to latest version and this is the first tiime we are using Smartview. None of our users can use Excel copy / paste function between worksheets in a file or between files. The function only works within an active worksheet. What is the fix here?

Try THis
Disable the Transition formula evaluation and transition formula options.
In Office 2003:
1. Point to Tools -> Options...
2. Select the Transition tab
3. Deselect the following entries:
- Transition formula evaluation
- Transition formula entry
4. Choose OK
5. Repeat the above steps for each worksheet in the workbook, by selecting each one in turn adn repeating steps 1-4.
In Office 2007:
1. Point to the Office button
2. Choose Excel Options
3. Select Advanced (at the left)
4. In the right-hand pane, scroll to the bottom
5. Under Lotus Compatibility Settings for..., deselect:
- Transition formula evaluation
- Transition formula entry
6. Select the next worksheet in the drop-down menu
7. Repeat steps 5-6 until all worksheets have been processed
8. Choose OK.

Copy/Paste as quotation not working on TB 24.4 on Mac OSX 10.9.2

I can no longer copy text in an email, then paste as quotation, why not? I can copy and paste but I cannot copy then paste as quotation. I have tried using the shortcut keystrokes cmd-c and shift-cmd-o with no luck, I have tried using the menu items edit > copy and edit > paste as quotation, but neither works. Can anyone tell me why I am only having problems with paste as quotation?

Please do the following.
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.

Copy / paste color tint/temperature settings in develop

Lightroom 5.2 I have been trieing to copy and paste settings from one .dng file into the next in the develop module. I tried to copy (shift command c) the color temperature and tint and paste in the other file (shift command v) but nor Kelvin nor green magenta balance changes. What do I do wrong...?

Great!
that’s it. I understand the logic behind it as well.
Thank you for the help.
Marten
Marten Root
[email protected]
tel: 0031613244101
martenroot.tumblr.com
chambermusic.nl

Sending from FCPS to Color doesn't work (choosing Color is not possible)

Hi, i bought the final cut studio 3 update for my final cut 4.5 HD application and installed the full 47GB update and i ran all possible software updates. i even reinstalled my mac os 10.5.6 befor installing fcp. if i right click the footage in final cut pro for sending it to color 1.5 i can't choose alternative for sending it to color. sending the footage to compressor, motion or soundtrack works properly. i've never used colors befor, so... do i have to preset something in the settings? additionaly, i made a online registration for color, not for fcp. thanks for helping.
Message was edited by: Snydelchen

Hi, i bought the final cut studio 3 update for my final cut 4.5 HD application and installed the full 47GB update and i ran all possible software updates. i even reinstalled my mac os 10.5.6 befor installing fcp. if i right click the footage in final cut pro for sending it to color 1.5 i can't choose alternative for sending it to color. sending the footage to compressor, motion or soundtrack works properly. i've never used colors befor, so... do i have to preset something in the settings? additionaly, i made a online registration for color, not for fcp. thanks for helping.
Message was edited by: Snydelchen

Copy paste color doesn't work?

Similar Messages

Maybe you are looking for