Copy paste does not paste the hyperlink. Same action in IE does.

This problem is application dependent -- pasting to Serif PagePlus works (contains the link), pasting to Serif WebPlus does not. Pasting to PersonalBrain works, but not to TreePad. But if I copy and paste from IE, the link works.

This is still a known issue to be resolved: SCN Known Issues List > MKT-256 Cannot Paste Text into SCN Text Editor when Using IE 11.
Other members have had success switching to a different browser or using the emulator, as describe in this post: SCN and Internet Explorer 11

Similar Messages

  • (Copy 1) printer not keeping the exact same driver settings

    I am almost finished with a a Windows 7 image build that will be going out to multiple locations.  Found a "bug" of sorts.  During our build (done with Powershell) several printer drivers are installed, including a PS3 driver from Lexmark. 
    We have several custom size images for labels that will be printed all over the country.  When tested with that driver, it works just fine.  However, when an image is installed and we attach the Lexmark, we automatically get the infamous "(Copy
    1)" that kind of screws everything up.  Even though it shows it as using the EXACT same driver, on the original printer, we can create Custom Sizes up to 48" in length.  But on the "Copy 1" printer, we can only do Custom Sizes
    up to 14.17" in length.
    Why do we have to deal with the infinitely NOT helpful "Copy" printers in the first place?  And why is Windows 7 not copying the driver EXACTLY as the original printer??

    Hi,
    Have you used "PersistAllDeviceInstalls" setting to keep the drivers from the reference PC?
    The unattended-Setup setting: Microsoft-Windows-PnpSysPrep\PersistAllDeviceInstalls
    can save time by preventing Windows Setup from removing and reconfiguring the device state for identical hardware.
    Meanwhile, the hardware must be connected to identical locations and must use the same drivers, and the drivers must have a consistent, unique naming scheme. If the hardware is not identical, it would be problem result.
    Karen Hu
    TechNet Community Support

  • OIM custom web page developed shows up on copy pasting the URL in browser

    Hi experts,
    I am facing this weird issue. I have developed a custom web page to generate password after adding custom menu item in OIM.
    The web page shows up on copy pasting the URL in browser. Only System admins after loggin in should get this menu item and page after clicking on it.
    http://xxxx:7778/xlWebApp/generatePassword.do
    But any1 can access this page currently. I have changed the action class to check for valid session,so clicking reset doesnt trigger the code.
    So atleast the functionality is protected.
    But the page still shows up on copy pasting the URL. How do i prevent this from happening ??
    Any suggestions and pointers would be appreciated.
    Regards,
    Confused developer.

    My action class does extend tcAction class.
    Does my action class need initialisation code i.e. below lines of code ??
                   ConfigurationClient.ComplexSetting config = ConfigurationClient
                             .getComplexSettingByPath("Discovery.CoreServer");
                   final Hashtable env = config.getAllSettings();
                   tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm",
                             "PrivateKey");
                   ioUtilityFactory = new tcUtilityFactory(env, moSignature);
    1 more question :
    Should i check for valid HttpSession() in the execute function() of the action class ??
    Can you share code for a sample custom action class please ??
    Thanks in advance.

  • Copy & paste the images in server side folder

    Hi ,
    I want to copy & paste the images in server side folder .
    Have you any idea than please send me.
    Thanks.
    Have a nice day

    [http://java.sun.com/docs/books/tutorial/essential/io/].

  • SP2-0042 when copy paste the *

    Hi,
    Did you notice this annoying enhancement in 10g : you cannot copy-paste the listing of the current line because of the star marking the current line.
    SQL> l
      1  select
      2  *
      3  from
      4* dualif you want to copy-paste the code above in your sqlplus session, it was working in 7,8,9. But no longer in 10!
    SQL>   1  select
    SQL>   2  *
    SQL>   3  from
    SQL>   4* dual
    SP2-0042: unknown command "4* dual" - rest of line ignored.Regards
    Laurent

    Bump

  • It is possible to copy paste the Flex AmChart component

    Hi
    It is possible to copy paste the Flex AmChart component to word or powerpoint.
    Thanks in advance.
    With regards
    Karthy

    1. To take a snapshot of a graph
    import mx.graphics.ImageSnapshot;
    [Bindable]
    public var balanceSheetImage:String;
    var snapshot:ImageSnapshot =
    ImageSnapshot.captureImage(balanceSheet); // balanceSheet is a Flex chart instance
    balanceSheetImage = ImageSnapshot.encodeImageAsBase64(snapshot);
    snapshot = ImageSnapshot.captureImage(earnings);
    earningsImage = ImageSnapshot.encodeImageAsBase64(snapshot);
    2. Copy to the clipboard
    Flash Player
    System.setClipboard(text);
    AIR
    http://livedocs.adobe.com/flex/3/html/help.html?content=CopyAndPaste_6.html
    You have more flexibility for that part if you use AIR than if you use Flash Player. With Flash Player, it will be only text based information, with AIR, it can be a binary format like a bitmap
    3. Someone explains here how to get that Base 64 encoded XML image to Powerpoint
    http://tech.groups.yahoo.com/group/flexcoders/message/157794

  • Copy + Paste in exact same position

    Hi. In PS7.
    Have 2 files open with same dimensions. I have a little number on the first file I would like to copy & paste to the second. I want it in the same exact position on the second file as it appears on the first.
    I thought if you dragged the layer from the first file onto the second while holding shift key would do it, but it only places the number on the center of the page.
    Is there something else I should be doing for this?
    Thanks!
    Jules

    I apologize. The 2 files were not the same size. They were off by not much, but not the exact same. Holding the Shift key does work while dragging.
    I will use your Duplicate Layer tip sometime tho, Ed.
    Thanks. Delete this if needed.
    Sorry to waste space on the posts!
    Jules

  • Copy/Paste the report in word.

    Hi all,
    I am generating a jsp report using Reports 10g. Is there any way to copy the content in report(report is in htmlcss format) and paste it in word doc with the exact alignments? I am able to copy/paste but the alignment is not proper. Is there any way...or it is the limitation in reports?
    Kindly help me out. It is quite urgent as our client is urging us on this issue.
    Regards
    Priya

    u can create text file from report file that is same as report file
    and then u can convert it to .doc file so it is ur word file
    so, for creating text file u have to set system parameter
    desname : path of ur file and name ex: D:\aa.txt
    destype : file
    mode : character
    so u can create text file

  • Why do I loose after copy paste the live paint areas?

    Hello.
    can anybody help me?
    If I copy paste something I loose the live paint area.
    I´m using the adobe illustrator CC. With CS5 I didn´t have this problem.
    thanks for help!
    ciao
    Lisa

    Hello.
    I have an object.
    I filled the object with the different colors with live paint function. (Select path, live paint, make)
    I select this object, copy it and paste it in another file.
    I loose colors in the object.
    I hope my explanation is not too complicated.
    thanks for your help!
    ciao

  • Problem of cut,copy,past ,undo and redo actions

    hi
    iam a student of computer science
    iam working on my project notpad
    in this i have to apply the command of doing cut ,copy ,past ,undo,redo
    how can i use thes actions in my project
    please help me for making my project
    i will wait your response at [email protected]

    what u can do is
    just component.cut();
    or
    compoennt.copy();
    component.paste();
    for undo and redo
    u need to take help of undo manager
    which will tell u whether u can undo or not
    same with redo case
    hope it will work

  • Record actions bug. does not execute the dont save action even though it acknowledges in action list

    i am using macbook pro running Lion
    so i am trying to save a series of actions that i want applied to a batch of images. i do all the actions correctly (i've done this before in earlier version of photoshop). stop recording my actions, and open the same image to make sure the automation process works properly and i get the same image through automation that i got when building my actions. one
    of the actions is cutting and pasting a portion of the image in a different location, yet during the automation it always ends up somewhere else, and not in the same place, which makes no sense. another issue is during the recording of my actions i close out of all the files b4 i stop recording and click dont save. so this should be automated, but when i run the automation it prompts me to click dont save which it shouldnt do. i cant sit at the cpu and click dont save for thousands of images. whts the point of automation if i have to actually do something. stupid program. and i can clearly see in the list of actions tht it recorded me clicking dont save yet it still prompts me every time. i really do hate cs6. i wld install my old photoshop but b/c i have lion it doesnt support it... of course.. *rolls eyes*

    @conroy - one of the actions means one task in an action (see screen shot).
    @noel - i am able to run my action properly when i "play selection", but when i try to run a batch of images through the "automate" function is when the issues begin to arise. at least most of the issues.
    i would insert an image to show what i did, but i cant seem to get that to work (on my pc or mac... weird).  i loaded it to my fbook page and u can view it by following the below link
    https://www.facebook.com/photo.php?fbid=750482081505&l=4d1bb044bd
    you can view an image of what i did here.
    so in detail what i am trying to do is:
    record an action of the edits i make to a raw image so i can then run that same action on a batch of thousands of images via "automate."  the specific tasks i am trying to complete during my action should be visble in the link i provided. to explain in detail what is occuring that is being recorded as an action:
    1)- i press begin record
    2)- I am open a raw image
    3)- there is a time stamp in the image and i select and copy the time stamp from the corner of the image
    4)- i then open a new document and past the time stamp into the new document
    5)- i then increase the size of the pasted time stamp by about 3x by changing the resolution
    6)- i then go back to original image
    7)- i crop the original image to exclude the time stamp and other superflous things on the edges of the image
    8)- i then rotate the original image 90 degrees CCW
    9)- i then go back to the new document w/ the time stamp and select the time stamp with the marquee tool, so I can copy the time stamp to the original image
    10)- i copy and paste the time stamp to the original image, i use the "move tool" and move the time stamp to the top of the original image.
    11)- i then flatten the original image (i thought when this was done this is essentially combining layers, so there should be no possibility of the edited time stamp moving around as it has been flattened onto the original image)
    12)- i then save the original image (that was flattened w/ the edited time stamp) as a .jpeg  As part of the save process i also select the resolution.
    ***issue***
    so i am now having an issue on this section as well.  as you can see in the link i provided i have told adobe to do all this, yet now at this section it prompts me to make a decision about the resolution (i.e. press "ok").
    13) -after this step i then select "close all" from the file menu which closes the original image that i just saved and prompts me if i want to save the new document i created for the time stamp i edited
    14) - i select "dont save"
    15) -i press stop record
    16) - i then go to the folder where i saved the file i just edited in photoshop and change the name.
    17) - i start the action process to see if i can replicate the manual actions i just completed through automation.  i have no issues replicating this when i manually start the action, except for my issue w/ the time stamp detailed below.
    ***issue*****
    when i do this the time stamp that i edited and pasted back into the image is not in the same place. i have only gotten it to be in the same place once, and the only thing i did differently was continually re-create the above action in the same manner.  each time i recreated the action the time stamp was in a different place and one time it was finally in the place i moved it to.
    18) - after checking that the action works, i then attempt to automate a batch of files
    19) - i select file -> automate -> batch
    20) - in batch i choose the folder with the original raw images that i now want to run the action on and also select the folder where to place the altered images
    21) - in the batch menu i do not have any of the boxes checked (i.e. suppress color profile warnings, etc.)
    22) - i select "ok" and the automation process starts
    this is where i run into issues.  originally i would get prompted @ step 14 (above) instead of the automation process just reading the task in the action that says select "dont save". somehow i do not get prompted there anymore. now i get prompted at step 12.  it saves its as jpeg, but instead of completing the save process, at the resolution screen it prompts me to select "ok" instead of reading the task in the action that says select "ok"
    i have created new actions for the images i collect since CS4 and CS5 and i have never run into any of the issues i have described above. i appreciate any and all help you can provide, as it currently stands i am pretty upset b/c i have wasted an entire day or productivity messing w/ what appears to be a buggy program.

  • How to Copy Service request Notes to the new Service request

    Dear Experts
    I have to write code for copying the service request's notes filed value to the new service request when User clicks on copy button.
    Fields in the Heard are getting copied when user copies to a new service request. But notes filed are not getting copied.
    Please suggest the available options for coding / configuration to achieve this.
    Regards
    Hanu
    Edited by: Hanu Madhava on Dec 14, 2011 12:05 PM

    Hi,
    The thing is like this....
    i have a released request in which we have more than 1200 objects, in that i dont need 10 objects.
    so when i create it as copy of transport request, i just deleted those 10 objects and saved.
    Now, if i transport the new request how many objects will go? 1200 or 1190?
    in the new request i am getting the old request under Comment: Object List Included.
    is it necessary to transport the old request?
    i need to transport only 1190 objects.
    Regards,
    Satish Reddy.
    Edited by: Sathish Reddy on Jan 28, 2010 2:18 PM

  • Automatically create Object, Character & Paragraphs style when you copy & paste the same item.

    InDesign could create styles automatically. If I am copying and paste an object or paragraph - that means I will be using it in multiple pages and consequently be making changes to it. I know I can always create a syle for all my elements, but having that feature build-in would be great. Especially for the designers like me who works on small documents. Great Forum!
    Thanks!

    InDesign make it really easy for you to create styles. I just believe that having it as an automatic feature (of course, an optional feature) would save time when working in small - mini publications, where there is really no need to create syles . Just my thought.

  • How can I Copy/paste the pixels within a frame in a video layer to another frame? (It duplicates the whole frame instead.)

    I'm making a handdrawn animation in the timeline using video layers, so each video layer contains the frames for the animation. The method works great..except for this -
    If lasso select a section of one frame and try to paste into another frame, it duplicates the the whole frame and pastes it with an arbitrary long frame duration for some reason (not the same duration as the frame its copied from)....not at all what I'm trying to do. Any work around? I've tried all the variations of 'paste special' to no avail.
    Thanks.

    Images and other object can either be floating or be inline. Yours are floating and will not move with the text. Inline object will move with the text but can't be outside the text layer. It doesn't help if you have created section in the document. Floating images doesn't care. Nor will it help if you create several documents that you want to merge later. Doesn't make any difference.
    My suggestion is that until your text is finished you have the images inline. Then as a last editing you can start make the images floating and move them a little.

  • Copy & paste the exact object?

    When I copy a rezized image and paste it somewhere else in my document it shrinks to the size it was when I first added it to my document.
    Please can someone tell me how I copy resized images so that they remain the size I want them when I paste them?

    Hi, Lillybiri;
    I'm a little confused.  I see you say you can "easily" rearrange the priority on the timeline, but I am having a really hard time with this.  Having to drag and drop each one is very laborious and time consuming.  Do you have any wonderful shortcuts for allowing me to reorder several objects at one time?
    What I'm finding is that when I try to drag multiple layers at once, the timeline flashes, but nothing happens.  The "Bring to front" and similar buttons aren't active with multiple objects selected.  I'm sure it's just something I'm missing.
    Thanks;
    Amy

Maybe you are looking for