Copy paste mappings very slow

I am using OWB 11g and the copy paste opeartion of mappings in the design center is runnig too slow.
The paste operation takes a lot of time to complete. The session goes into a DB file sequential read wait event.
I tried gather stats of the OWBSYS schema, but it didnt help.
Please advice in this regard.
Thanks in Advance
Cheers,
Commander

Which version of OWB are you using, which patch level?
Cheers
David

Similar Messages

Satellite U500 - Copy process is very slow

Hi friends,
I'm using Satellite U500-1f5, for last 2 months. It is core i5 with Windows 7. Still the copying process is very slow and some times booting is little bit slower.
Can anyone post a valid answer to resolve this problem?

Hey mate,
Sounds like that you have installed a lot of software that slows down the performance of your notebook.
So which programs you have installed?
Theoretically it could also be caused due a virus or trojan. You should check your notebook for viruses using a good antivirus program like AntiVir.
Try also to defragment the HDD. If you install/uninstall many programs, you should defragment the HDD from time to time. You can use the integrated Windows defragmentation tool.

Copying files either very slow or doesn't work at all

I've tried copying files from a DVD to an external drive, and from one external drive to another, and I've been running into troubles on my Mac Pro, namely, I get an error code 36 (corrupted files) and the copying process hangs, requiring me to reboot. However, I was able to copy the files from the DVD to my laptop HD, so I don't think that corrupt files is the problem. After rebooting my Mac Pro, I was able to copy files from one external drive to another, but it was incredibly slow (about 1GB per hour), and I was still unable to copy files from the DVD to an external drive. I've verified all the disks with Disk Utility, and I've repaired disk permissions on my Mac Pro HD but apparently need to re-run since when I verify permissions again, I'm still getting a lot of errors or comments like "Warning: SUID file "usr/bin/rlogin" has been modified and will not be repaired". Scanning my Mac Pro HD for viruses, quite a few files are coming up with the comment "did not have permission to open the file." Other than continuing to repair disk permissions, does anyone have suggestions about what might be causing this and/or on possible next steps?

A little further info - I checked permissions and I have permission to copy the files in question. Also, it seems that most of the errors that pop up when I verify permissions are of the type that can safely be ignored, according to Apple -- I'll go through the list later and cross-check them to make sure that they're all ignore-able, but thats what they appear to be.

New itunes copy/rip rate very slow

hello all,
after updating itunes to new version my rip rate has dropped, instead of a rate of about x7.0 to x10.0 i have dropped to x0.1 to x4.5.. it now take me hours!! to copy a regular store bought cd.
please does anybody have any ideas how to up the tempo (PS - reloading older version of itunes isn't working.)
thanks for any ideas, have a good one
ML

Tom,
Are you familiar with firewire target disk mode? If you were to connect the two computers using firewire you could do some file management. Make sure that you have key files on one machine and a TM backup. Then do a clean install on the Mini. Better yet, have you considered partitioning the drive on the mini so you can have the best of both worlds?
Depending on the size of the hard drive, you could have one partition for a clean install back up of just a system, one partition of the MacBookPro system with all your familiar settings and preferences and then one partition that is just a fresh start with every thing new and clean. All you have to do to compare and contrast is reboot to a different partition. If things get back to fast, you may not need or want all the old baggage that may be slowing you down.
Explore some options.
Ji~m

Sending mail with "sent" is fast, but copying the sent mail is very slow, sometimes takes a minute; can it be speeded up?

After hitting "send", a screen comes up showing a moving bar "copying the mail to the sent folder", the bar goes fully right on
the screen but then I must wait, sometimes a minute for the copying process to complete. Then I always get a screen message
next that says in effect could not copy, so I close that screen and then go to my sent folder and the email I sent shows up. So,
the copy process is very slow and then I get a message could not copy, but in fact a copy does appear in sent folder????
Thank you

You do not mention how big is the Sent folder.
I would first try to archive a load of old sent emails. This will reduce the file size. Maybe the delay is due to a large file.
Set up Archive Options:
* https://support.mozilla.org/en-US/kb/archived-messages
choose to archive by month and year and keep folder structure.
Archive anything older than a month.

Concatenated disc set very slow

Hi,
I have a 4GB concatenated disk set set up with Software RAID that is very very slow copying files.
Connected to a Macmini latest generation thru a firewire 800 port.
What I get copying files is very slow transfer rate. If I look in Activity monitor I get a 6.8/7.0 MB/S.
Doesn't matter if I copy from USB drive or internal drive. Same transfer speed.
Is there a way to correct? Is it supposed to be so slow with 2TB hard drives?
Cna I split the drives without loosing all the info?
I would expect around 60 MB/S from internal and 34 MB/S from USB drive.
Thanx

Be sure you are not having any drive problems first. Use some utility to check the access times and throughput. XBench is a good free app for that.
Be sure fragmentation is not a problem. Leaving your computer on one or two nights a week will allow it time to defrag itself.
Leopard loves to "cat-knap". Those WD drives aggravate the problem because they are slow to spin up. I've gotten used to it, I trained myself to have a little patience.
You can ease the problem in preferences > energy saver. Just uncheck the "put the hard disk(s) to sleep when possible" box and set the sleep timers accordingly or throw down some cash and get you one or two of those raptor drives.
Finally, Leo uses more memory than Tiger, be sure you have enough memory available at all times for your disk caches and your programs.
Kj

Basic copy & Paste question.

Still new to Logic & just moving over from Cubase,I find simple things like copy & paste so very complex.I am trying to mix down a few tracks from a previous project done on Cubase.I have the vocals on 1 track with just 1 take.The singer has sung the chorus just once instead of twice so I need to repeat the chorus & all I'm trying to do is copy the chorus,split the single vocal track so there is some space to add the repeated chorus & attach the rest of the vocal track following the repeated chorus.
In cubase I would just cut the chorus portion,copy it,move aside the remainder of the song to make room & paste the copied chorus in the empty space.
After reading through the manual I still cant figure out how this simple procedure is best approached in Logic.Do I need to go through the sample editor or the 'comping' thing that involves arranging different takes? In this case this is only a single take.How do I cut exactly the measures that contain the chorus & place it right after it? Can someone please explain a step by step approach as to how to go about?

Thanks a lot for the response.When I tried using the scissor tool & cutting it,the whole track disappeared! Please let me know how to cut just those specific measures & copy those measures alone,so I could drag aside the following measures to make room for the copied portion to be pasted.I spent a lot of tume trying this but just couldn't get it.Is there a video tutorial somewhere? Where/How do I specify the exact measures to be cut?

My indesign is very slow in copy and pasting

Hy to all,
i work with indesign CS3 on MAC with OS 10.6.4.
I have some ai-Files in Textlines. If i copy and paste them to other Textframes it is very very slow and the spinning weel is showing.
I know that i don´t have these problems on OS 10.5.8, so maybe it is a problem in my new system.
Did someone could tell me, how i can fix this problem?
Greetings from germany
KAi

For starters, see Replace Your Preferences

IOS 6, slow response to "Copy/Paste"

Why is iOS so slow to display the Copy and Paste prompts compared to previous OS's? I have an iPhone 4, which is considered old now, but Copy/Paste in a text field doesn't seem very processor heavy.
What I experience:
When I highlight text, then hold a finger long enough to for the copy prompt to show up -- iOS 6 has a 2 second delay before the prompt shows up.

Check the manual http://manuals.info.apple.com/en_US/iphone_user_guide.pdf page 23 regarding copy and paste. It does not mention having to hold your finger down for the copy/paste prompt. I've tried my phone and all you need to do is tap to get the prompt, and if you select the text, it will come up automatically.

Copying/Duplicating elements is very slow in Edge Reflow

Hi,
When copying/duplicating elements in Edge Reflow that have quite a few nested areas it becomes very slow (sometimes taking 5-10 minutes!) I've tried it on a few machines in case it was a hardware issue but it seems sluggish on everything I try. Does anyone else have this issue and is it a software bug?
Cheers,
Rob.

Hi Vic,
Thanks for your response.
Copying and pasting a single div is fine but as soon as there are multiple nested divs it rapidly becomes very slow to copy and paste (especially if there is quite a lot on the page). Quite often we are finding that we are having to force quit Reflow because it just hangs for 10 minutes or more. Areas such as headers that are quite complex and have a lot of nested divs we are therefore forced to manually copy bit by bit.
Many thanks,
Rob.

Copying folders from external hd to mac pro desktop very slow

Hi everyone,
I have been experience very slow download times when copying folder from my Lacie 30GB External HD to the desktop of my Mac Pro. For instances, it took 19 minutes to down load a folder with 300MB of contents to my desktop. The Lacie is "Mac OS Extended (Journaled)" I ran Disk Utility on it and "the volume appears to be ok".
Any ideas on what is going down?
Thanks...Stan

I would troubleshoot or dump the LaCie in favor of something else.
LaCie have been trouble enough in the past with FW ports, power adapters, shorting of cables, running very slow when connected off PCIe SATA using USB/eSATA cases.
But you never say if this is a FW800 case, or what interface, that is so slow. Resetting FW ports is a troubleshooting trick designed just for LaCie cases. Along with swapping cables and power adapter.
I would give all your drives a shot of Alsoft Disk Warrior to insure that the directory and file system are okay. And look at the hardware test in DW output for spare blocks vanishing on the drive.
Using SATA drive, case, and controller of course should be fast and done in seconds, not minutes.
http://www.macsales.com/firewire

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? Thanks

I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!

FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing.

Lion is very slow. I have problem to make copy of a file. How can I make a check to see what is wrong?

Lion is very slow. The big problem now is when I need to make a copy of a file in an external HD. A file about 7 Gigas can take 4 hours!!!
Using Aperture I try to save a library in an external HD (another) with function "export project as a library" an takes hours for something around 1 giga.
Since I have Lion I can not use Time Machine. I have a Western Digital 2 Teras in raid 1. 1 tera for copy and 1 tera as an image. It's been impossible. I had to format the HD and when I try to start using Time machine my 600 gigas of data becomes in 7 days!!. 7 days !! for a backup. An usually after several hours (sometimes 20hrs, sometimes 1 day and a half) the process stoped abrudtly... and that's it. star again.
How can I check or perform a exploration to see what is happening?
thanks in advance
RyJ

Is a Western Digital Studio Edition II 2T (in RAID 1 mirror). The HD has 2 drives 1T each an put one mirroring the second one.
HD is connected to Mac through Firewire 800.

Hi i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone,

hi i have ipad mini i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone, is that the reason y i cant
download games anymore?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

Very slow copy and rm speeds

I've seen other postings about slow copy processes upon upgrading to Snow Leopard. However, none of the replies seem to address the situations I am experiencing. First, copy times between my MacBook Pro (2 Ghz, 2GB, 100GBHD, 15" - the first MBP introduced), and external USB2 Lacie HD have become very slow (1 hour for 4-6 files totalling ~4GB). Curiously, sometimes the same size transfer occurs in 3-4 minutes. I recently upgraded to SL from Tiger, and the Tiger times were in the 3-4 minute envelop. The external HD is a 1TB Poulton Lacie, with over half the disc free. My MBP HD has about 20GB free, and only the Finder, mail, occaisionally xcode, and occaisionally a browser, (either Safari or Firefox) are running during the transfer. The same sometimes occurs with only the Finder and the activity monitor running. The USB is connected directly to the MBP. So, in summary, the ext HD is directly connected, half empty, there is room on the internal HD, and the memory is not particularly burdened with other processes. The activity monitor slows less than half the CPU capability being used.
Secondly, another problem occurs using the unix secure erase, rm -Pr. It is very slow since upgrading to SL from Tiger. The finder's secure erase is too slow to use.
Any thoughts about why on either? Right now, I'm wishing that I stayed with Tiger. Thanks.

I suggest looking at your logs in Console.app to see if anything unusual is happening during the long file copies.
The SMART status isn't that useful. If it says the drive is dead, the drive it dead. If it says the drive is "verified", the drive could still be dead. A good indicator of this is if file copies take an hour instead of 3 minutes.
Is this the original hard drive in that machine? If so, I'm surprised it has made it this long. Notebook hard drives typically start failing at three years of age. You might not notice it until you do a major reoriganization of your files' organization on the disk - such as installing a new operating system.
I compared Finder's secure erase with rm and they seem more or less equivalent.
I think your internal hard drive is just failing. That's all.

Copy paste mappings very slow

Similar Messages

Maybe you are looking for