Copy-paste not proper

When I copy paste objects as a block (not one by one) in UI it paste all objects into the left top corner as a pile and lose the location data of the original objects. Is it normal or, do I mis anything.
thanks;

That's probably the designed-in behavior. Unfortunately, it's like that also in Visual Basic. Select a bunch of controls on a form, switch to a new form, paste them, and the whole group of them are pasted so that the upper-leftmost one of them is in the upper left corner. Maybe that's the agreed upon style of doing things -- I don't know. I agree it would be nice if it would paste them in the same relative position on the form, if possible.

Similar Messages

  • Password protecting PDF from copy/paste, not secure in Mac "Preview"?

    I created a book for someone and sent a PDF of it.  I secured it with a password so it can be printed but not edited or copy/paste compatible.  When I open the PDF on Acrobat on my PC, its locks me out as it should.  I sent to friend and of course its the same way on Acrobat on his Mac.  But when he opened it in "Preview" on the Mac, it lets him copy paste.  He said he is using OSX Lion 10.7.4.
    Why is Mac's viewer bypassing the security and how can I keep it from doing this?

    A PDF consumer (viewer) is expected to honor any standard security restrictions that are in place, but there is no way to ensure that every one will. A different method that provides a strong form of security could be used, such as Certificate security or LiveCycle Rights Management (a type of DRM), but then non-Adobe viewers such as Preview wouldn't be able to open the document at all.

  • Why is copy/paste not working directly?

    Hi,
    I have some problems when I try to copy/paste from Illustrator to PhotoShop. There is an error from Illustrator when I try to do so: " The operation cannot complete because of an unknown error. [Parm]".
    What I did so far:
         - Do the updates
         - Run Illustrator with the 64bit version
         - Reset default configuration on most of my settings in Illustrator
    I found a workaround that allow me to do the operation but takes me a lot longer. I copy the part of the image that I want and then I paste it in a new document in Illustrator. From this new document, I do another Copy and then. it let me paste it to my PhotoShop.
    Specs:
    Windows 7 pro 64bit
    HP WorkStation Z230 (F1L56UT)
    Intel Xeon E3-1245V3 @3.4Ghz
    16 Gig
    240 Gig SSD + 1000 Gig
    Thanks in advance for your time!

    I don't know why the problem is happening, but an alternative to try is Cmd+J to duplicate a selection to a new layer.
    You can attach a screenshot of Photoshop when the problem is occurring. It's important that the Layers panel is open in the screenshot. Use Shift+Cmd+3 for a screenshot of the whole screen, which will be dumped on the desktop as a PNG file. Attach the PNG to a forum message by using the little camera button above the message entry field of a reply to this post. Note that attachments won't make it to the forum by email.

  • Why is Copy & Paste not working on CS5 on my Mac?

    I'm using two different .psd files - on one, copy/paste (or Cmd+C, then Cmd+V) works perfectly after I have made a selection - it creates a new layer. On the other, this doesn't happen at all. I would attache the file but I don't think I can...
    In any case, they are both simple files for Photoshop beginners. The one started out the same as the other, but I went through some basic steps in my learning, and now I am unable to copy/paste in the second file...
    Does anyone have any ideas why this might have occurred? Thanks.

    I don't know why the problem is happening, but an alternative to try is Cmd+J to duplicate a selection to a new layer.
    You can attach a screenshot of Photoshop when the problem is occurring. It's important that the Layers panel is open in the screenshot. Use Shift+Cmd+3 for a screenshot of the whole screen, which will be dumped on the desktop as a PNG file. Attach the PNG to a forum message by using the little camera button above the message entry field of a reply to this post. Note that attachments won't make it to the forum by email.

  • Cannot Drag anything, copy + paste not working

    My shiny new macbook was working great until this morning, when things went rather awry.
    I have no idea why, but I cannot copy and paste any text (either using apple-c or the edit menu) and I am unable to drag anything such as files or safari interface components. (I somehow managed to get rid of the address bar and I cannot drag it back)
    Does anyone have any idea why it would be doing this?
    I've just noticed that copy and paste works in TextMate, but not in camino or safari

    I have this issue as well  and have put a thread here with Apple Support Communities
    I can copy/paste on the iMac's Hard Hrive to any folder with no restictions. If I try to copy/paste to an outside source i.e. USB – DVDRW – external HDD or NAS, it does not give the PASTE option in the drop down menu.  If I drag and drop a file, I get a circle with the line through it when placed in the folder and does not copy/paste.  I think that’s an error or stop signal.
    In Mavericks I can copy/paste to a mapped drive on my NAS, only if I first right click on NAS Drive icon and go to ‘Get-Info’ and in the General area’s Tick the ‘Unlock’ box. As soon as I have finished pasting, the lock box ticks again by it's self.
    If I right click on the USB and go to ‘Get-Info’, in the General area I only get a Share Folder Tick box and not an Unlock Tick box.  Share does not allow paste to activate in the drop-down menu
    How do we permanently Unlock Mavericks’ paste, Apple?
    Thank you

  • Copy Paste Not Always Available

    So how how do you copy paste from (say) one e-mail to another e-mail?  I can copy the desired text, but when I navigate to a new e-mail (or Docs to Go) once I place my cursor I can not find the ability (icon) to paste.  I would love a keyboard shortcut if one existed.

    After reading a LOT of the replies here and some more experimentation I have solutions for the problem when trying to paste into an e-mail and Documents to Go:
    For e-mails - WORK AROUND - write some text in the new e-mail and THEN press and hold the cursor and the paste icon will appear. I could not get the paste icon to appear until there was some existing text in the body of the e-mail.
    For Documents to Go: As documented elsewhere, position the icon and HOLD down for two seconds and then the paste icon will appear.
    That's all for now.......

  • Copy/Paste not working in Firefox v23 & v24 without ZoneAlarm installed

    Recently I updated my Firefox from version 22 to 23 and I noticed copy and paste text from web pages in Firefox to other applications like notepad and even Firefox not working in my windows 8 x86. Copying text from other apps like notepad and pasting to Firefox works fine!
    I also updated it to beta v24 and same problem is still there. I don't have any issue with IE.
    BTW I don't have ZoneAlarm Installed.

    Hi ehsan453,
    If it works when you boot Windows in Safe Mode then it is likely that your security software is causing this problem.
    Other programs apart form ZoneAlarm can cause such issues as well.
    Which security software (firewall, anti-virus) do you have?

  • I cannot copy and paste a word document to the internet. Message " cut/copy/ paste not available on Mozilla and Firfox.

    I on a website trying to copy and paste a resume and I get the above message.
    %APPDATA%\Mozilla\Firefox\Profiles. This I put in my program folder. Per your instructions in your security preferences web page.

    Maybe:<br />
    Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

  • Copy/Past Not Working, New MacBook Pro

    Hello! I've seen this issue addressed in a few different forums, but no solution has been offered.
    I have a new MacBook Pro and have been having this issue all evening. I can copy and paste in the same window, but I can't copy and paste from a different window, which is kind of the point of paste and copy, at least in my situation.
    Can someone help me out?

    Often times problems like this are caused by incompatible third party software.
    Does this problem persist when logging in as a different user, e.g., Guest?
    Does this problem persist when starting up in Safe Mode?
    It will probably be helpful to see a system profile via EtreCheck.
    P.S. If your machine is new you should be able to get free support from Apple.  Contact Apple Support - Apple Support

  • Copy/paste not work for Word attachments?

    Update went fine, and I love it - but apparently I can't copy from a Word doc. Is this normal?

    I just experienced the exact problem as you. I was trying to copy and paste the equations in picture format from word document into the email. I was able to see the equations display correctly on my iPhone; however, both my gmail using firefox and my adviser's email can't read the equation pictures at all.

  • Recordset Copy/Paste Not Working in CS4 for ASP/Javascript and ASP/VBSript.

      Is anyone else having this problem?  I get errors.  Error says "While executing pasteServerBehavior in Recordset.htm, a javascript error occurred.  I have CS4 installed on 2 PCs.  Same problem on both.
    Mike

    Hi there.
    Javascript or any other script is not actually executed inside the JEditorPane. If you want your JEditorPane to run this you must include or write yourself, a browser type of feature to execute that code.
    If all you want is to be able to click on the link and take you to another page, put the href's in the normal body of the html and your hyperlinklistener should behave itself fine. The example in the API work's fine for my purposes.
    Cheers,
    Rachel

  • Copy\Paste Views not working in SCOM 2012 R2 console

    Dear Concern,
    Hi, I am using SCOM 2012 R2 and i have come across a problem that when i copy a view and try to paste it in same management pack, the paste action is not working. Cut and paste is working fine but copy paste not working. When i copy any view, the paste option
    come alive but did not work when i clicked on it.
    Has anyone tried and tested it?
    Regards,
    Jazeel Ahmed Siddiqui

    Hi,
    I have tested it in my SCOM 2012 SP1 Environment and it worked there from Sealed to Unsealed and Unsealed to Unsealed.
    I have no R2 Environment in reach at Moment so i cannot test it there.
    Cheers
    Christoph Maresch | My blogs: blog.cmaresch.at | XING:
    Christoph Maresch
    | Linkedin:
    Christoph Maresch

  • Copying/pasting multiple Notes at once

    Can't find an answer to this... I have tons of notes made in Apple's Note application on my MacBook Pro. I run Yosemite. Is there a simple way of moving them to another document like say Word or Excel? Copy/paste not working. I must be overseeing something simple. Thanks all

    Should have made it clear. I would like to move/export them all at once. Not copying and pasting over and over again.

  • Copy - Paste Velocity data only?

    Hello everyone,
    I have an ostinato pattern that repeats about 50-60 times, and I'd like to be played "loud-soft-soft." Is there a way to copy-paste velocity information so I don't have to manually change each notes velocity?
    I've tried copy-pasting hyper edit velocity information but it copy-pastes not only the velocity, but the notes as well!
    I could use the pencil tool to draw the hyper information, but that is almost as tedious as changing the notes by hand.
    Any suggestions?

    I got a GREAT suggestion from logicprohelp.com to use "groove templates" and apply 0% quantize and 100% velocity. In theory this should work, but no matter what I try (quantize strength 0%, Quantize swing 0%) it STILL wants to quantize my part, and does so in a way that it makes it sound like mistakes and jitters rather than the consistent triplet pattern I wrote.
    I'm going to continue to try this method, as it seems like it should work! I'm hoping its just user error!
    As for simply re-playing in the part...well, lets just say my piano chops are REALLY bad, and when I slow down the part to a tempo I can play it, it somehow looses the bouncy feel I wanted then I speed it back up. I was hoping there would be an easy way to get the "feel" I wanted with the velocities and easily paste them. Perhaps I should just bite the bullet and keep re-recording the part until its right! That would probably be faster in the long run, seeing as how there is no Copy-Paste velocity, and groove templates seem to be buggy.

  • Can't Copy/Paste betweet Two Projects

    I want to copy/paste a clip (which includes 2 video and 2 audio tracks) between two projects.  I open Project 1 and copy a clip.  I open Project 2 and paste.  But the paste does not work.  The last copy I did in Project 2 (of a clip that was already in Project 2) is the only thing that pastes, not the clip that I'm bring over from Project 1.  So then I went back to Project 1 and "exported" an xml sequence which contained the clip I wanted to paste into Project 2.  The import into project 2 worked but still I could not copy/paste from the imported sequence to the target sequence in Project 2.  I didn't want to drag he new sequence imported from Project 1 into the the  sequence into Project 2  because I needed to have access to all of the original tracks.  Why doesn't a regular Windows copy/paste not work and what can I do to get the clip from Project 1 to the targeted timeline in Project 2?

    If all else fails, couldn't you always just import the original sequence you're trying to copy from? Open it and copy/paste into the sequence you really want it in?

Maybe you are looking for