Copy & Paste Problems in Logic Pro 8

Hi All,
I'm working with LP8 and was trying to use some tracks from an old project on another newer project. I copied the files, closed the project, opened a new one and then pasted.
I've had nothing but problems doing it this way. I now realize I should have imported the audio files. But, after working on this new project for a few days, I'd rather not go back and start over.
Here are my problems:
1) The audio files on the old project aren't playing anymore
2) Any time I try to listen to a loop in the media browser, it plays through the copied audio track and changes the pan of the track.
3) Every once in a while when I add a new track and record or add a file it plays the old copied audio file through the new track instead of the audio file that is on that track.
Ok, I tried being as clear and concise as possible and again I've found how to import audio files from different tracks but I want to see if I can fix the problem some way before having to start over or do some hefty rearranging.
Thanks for any help you can offer
Chris

Hi, in my experience you can always better import the audio files than paste them into your project (but you figured that one out yourselve :))
To answer your questions:
1. Could it be that you've moved you files from the old project's audio folder (cut instead of copy?)
2. I don't know why listening to a file in the media browser can affect your panning information... Could it be that the automation write or latch mode is turned on?
3. Could it be that the old file are still on the track you're recording? So that you are recording on top of the old file? When you record a new file over it, it's hard to see any underlying regions (they might show up slightly with some dotted marks)
I hope I was able to help you... Good luck!

Similar Messages

Click 2 call and excel copy/paste problems

Recent posts from late May claim that the click to call issues were resolved in late may. Today is June 21/12 and I resolved the problem yesterday by un-installing the click to call program. Prior to that cut and copy requests were losing the marquee around copied cells and when target cells were right clicked the context menu did not include Insert Copied cells.
Some problems may have been addressed but the problem still exists. It's too bad because click to call was a good feature.
Solved!
Go to Solution.

The problem was identified and fixed already in an update to the Click to Call toolbar in April: http://blogs.skype.com/garage/2012/04/skype_click_to_call_fix_for_of.html
*Best Solution* Download the new version of Skype Click to Call. It’s the quickest way to solve the copy & paste problem you are experiencing. Go to http://www.skype.com/intl/en-us/get-skype/on-your-computer/click-to-call/windows/ and click Download Now.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Cutting and pasting audio in logic pro 8

OK just would like to know if cutting and pasting audio in logic pro 8 is as tedious as it is in logic pro 7.
Thanks
Djed19

mrsandsteve wrote:
but it is normalised and in the sample editor?
Looks like it is normalized to the infinity
Can you audition anything at all when play this audio region ?
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Persisting Cut-off or unplayed notes problem in Logic Pro X

Hi Guys,
I've been having this persisting problem in LogicPro X. Let me just explain it here, I have a MIDI file which i got from the net, i played it in my piano role software and it was fine, but one i just imported the midi into Logic and just exported it straight away( just for experiment purposes), the notes became cut-off( example of cut-off? Ill send you the MIDI which i got on export from LOGIC aswell) when i played them in the piano roll software, and if i import and export the same MIDI in another software its fine, its just trhat ive grown accustomed to Logic Pro and i really enjoy it! I find FL studio and all those things annoying, so thats why i wondered if you guys could help me get a fix. And if something is wrong with my Logic just incase - if you guys give me your email address i will send the midi to you and can you just export it from your software and send it back to me? If the MIDI plays fine could you tell me your Logic Pro settings and such and such thanks! -And FYI if i re-open the exported MIDI in Logic its plays back fine! Im getting really annoyed and confused
PS: My piano roll software is Synthesia

You might want set up a key command for "paste at original position". My key command is command/option/shift/p. This seems to work flawlessly. Unfortunately I have run across the bug you're refering to.
Jim

Copy & Paste problem stops working

I've been experiencing an unusual issue with the copy and paste function on my MacBook Pro. The copy & paste function appears to work fine after I've restarted the computer, but after a short period (can be hours or days) the copy & paste function stops working. Instead of copying the highlighted section (usually I'm copying text) when I go to paste the text, all I appear to get is one space. As I use this feature countless time in the run of a day (copying from mail, Daylite, NeoOffice, Text Edit...)this is turning out to be very annoying.
I have recently re-installed "MacOSXUpdCombo10.4.11Intel.dmg" to see if that made any difference, and everything seemed to be working great for about 5 days, then the same issue started again. If I shut down and re-start my Mac, it seems to offer a temporary solution to the issue.
I have not tried re-installing the operating system.
Thanks in advance.
BassPlayer07

Amazingly, I found this looking for a fix for the exact same problem. Mine started today, though it could have been yesterday as I don't remember using copy or paste yesterday.
The one change I have made in the last 48 hours is that I installed the MS Office SP 1 update that just came out. I know it was working right after that update because I was using copy/paste in Word.
The other difference I've found is that a restart doesn't seem to fix mine. I just restarted and still no copy/paste - just a single space instead. And you're right, it doesn't matter what you copy, it always pastes just a single space.
I've tried CMDC/CMDV and the menu items to the same effect.
I hope someone has an answer.

Evolution MK449C Mod Wheel problem with Logic Pro/VSL Performance Tool

I'm using the latest version of Logic Pro on a new Intel Mac Pro. My controller keyboard is the Evolution MK449C, connected via a USB cable.
When using a Logic Audio Instrument assigned to the ESX Sampler Plug-in (running various samples, mostly from the Vienna Symphonic Library,) Logic's Transport Window doesn't register any modulation information generated from my keyboard.
As the VSL Performance Tool relies heavily on the Mod Wheel info to effect the sounds, I'm at a bit of a loss to spot the solution. When I assign a different conroller to the Mod Wheel, i.e. volume, pan, pitch bend, etc., I can see the info in the Transport Window with no problem, so I know the wheel itself is working okay.
Has either Logic or the ESX got some kind of controller filter, - maybe I've accidently turned something on that cuts out any incoming modulation. Can anyone help?
Thanks
Mac Pro Mac OS X (10.4.8)

It's good to know someone else is having a similar problem (if one can call that good!)
I've been poking around and I've also noticed this: If I create a cello part in Garageband, articulation works everytime I open it. If I take that Garageband song and open it in Logic, articulation still works everytime I open it. The Logic file in this instance is saved as a "Logic Song." I don't know how to tell, but I'm assuming the Logic song is drawing it's sound files from the Garageband song (I don't know how to check that).
However, if I save the newly created Logic song as a project - with all sound files being copied to folders within a master project folder - articulation does not work when I reopen the file.
Strange. And frustrating.
MacPro 2.66 2GB RAM & Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

Presonus Faderport problem with Logic Pro 7 running Snow Leopard

I've been been using Tiger to run Logic Pro 7 without any problems for the past few years. I've held out on upgrading to Snow Leopard since everything worked so nicely, but I finally gave in and loaded 10.6.6. Logic Pro 7 seems to be okay except for my Faderport control surface functionality. I upgraded to the newest FP firmware, and Logic 7 recognizes the FP, but it doesn't work. When I open a Logic project I get a pop up dialog box that says:
Module file "Faderport" is too new and cannot be used with this version of Logic control surfaces. Please get an update of the Logic control surface application file. I also get another dialog box that says: "Loading Module Faderport..." But nothing happens.
I'd appreciate any and all ideas on how I might deal with this. Thanks!

Hi,
I'm getting this message since updating the Faderport Firmware. I'm using Logic 7 in Tiger still.
How did you fix the install pref?

MP3 Problems in Logic Pro 8

i'm gettin this message when i try to use mp3s, the same ones i used on my partners mac and logic pro 8 earlier today and they worked on his,
*The file “another DJ Ant-Lo ex#16BD18.MP3” is not recognized by Logic. Please ensure that the file properties are correct and that it is a supported file type.
can someone tell me how to correct this, if u know how u can also email me @ [email protected]

Hi, in my experience you can always better import the audio files than paste them into your project (but you figured that one out yourselve :))
To answer your questions:
1. Could it be that you've moved you files from the old project's audio folder (cut instead of copy?)
2. I don't know why listening to a file in the media browser can affect your panning information... Could it be that the automation write or latch mode is turned on?
3. Could it be that the old file are still on the track you're recording? So that you are recording on top of the old file? When you record a new file over it, it's hard to see any underlying regions (they might show up slightly with some dotted marks)
I hope I was able to help you... Good luck!

Problem with Logic Pro and Soft eLicenser on Mountain Lion?

Hi!
I have a bunch of Arturia synths, which requires the Soft eLicenser to work. This has always worked great with Lion, never any problems with eLicenser (never had to open it etc.)
Now - I upgraded to Mountain Lion, and tested my synths to make sure everything was OK, experienced a bunch of problems, and did a full recovery to clean Mountain Lion.
After installing the Arturia synths, and adding my licenses, I installed Logic. Everything worked fine!
BUT!
When I closed an Arturia synth within Logic, or closed Logic after running a project with one of these synths, I couldn't reopen any of these synths within Logic afterwards - In fact, I couldn't open the stand-alones either! And when I tried to open the eLicenser Control Center, it would just say "Reading eLicensers" forever. After a reboot, everything is OK.
I can open and close eLicenser Control Center and standalone synths as many times as I want, as long as I don't open Logic, and then Arturia synths as an AU in Logic.
I found a workaround: Open the eLicenser Control Center, and let in run in the background (cmd+H), and then open Logic. Then I could open Arturia synths and close them, close Logic and reopen etc. without any problems at all. NO PROBLEMS.
Until I close the eLicenser Control Center, then I have to reboot to be able to start it again.
I hope you understand what I mean here. It's a bit hard to explain.
In short terms: Logic makes Soft eLicenser crash when a eLicenser synth has been opened as an AU.
The same problem is when scanning the AU with AU manager. eLicenser window should be open before scanning.
Does ANYBODY have the same problems? Can anyone who has these applications test it out?

So it definitely seems to be a issue with Logic.
I can't force this error in 10.7.X no matter how hard I try, but in 10.8.2 it's definitely Logic messing things up.
Could it be auvaltool which has a bug? Or is that only run with AU manager on validation?
Hopefully this discussion can get some attention, and maybe it could be corrected. I guess a lot of Logic Pro users also has eLicenser Control Center for validation of their products.

InDesign Middle Eastern CS4 copy/paste problem

Hey guys,
I usually work on the US version of InDesign CS4 on a Mac... But for a series of projects I need to do for Dubai, I am using the ME InDesign CS4 on PC.
Sigh.
Now, my problem is, when I copy/paste what our translator sent us from WordPad (I don't have Word installed on the PC side ) It is flipping my text around.
Now, I bought the ME version of InDesign to avoid this problem, as I knew it would be a problem with the US version... So what am I doing wrong? I was following this thread (http://forums.adobe.com/thread/450951) and feel like I have the exact same problem that person had, all the way through to the end.
Can someone further help me out? I need to be able to use this... I have to send everything to press next week!! (eek!)
Thanks,
Jenn
FYI--I am trying to use Arabic.

First of all, you can (should) place the text. Why are you copy/pasting?
Make sure your text is set to use the World-Ready Composer. If the
document started its life in InDesign US, the default composer is
going to be the non-World-Ready one.
Harbs
http://www.in-tools.com
Innovations in Automation

Problem with Logic Pro 7 Academic Version

I've been using my academic version of logic pro 7 for about a year, and just recently it hasn't been starting up the way it used to. Usually when it launches, it says logic pro 7: academic version. But now it just says logic pro 7 and tries to run it as a one day trial of the retail version. I tried to get help over the phone but they were saying that they can't help me troubleshoot because they can only help out with logic studio. basically, they say to just reinstall it and if still have problems post it on this discussion. so here i am after the reinstall with the problem still occurring. some help please?

i just updated my xskey from the xskey updater in the utilities folder and it works now.

Problems starting Logic pro

I have just installed logic pro upgrade software 9.0 then updated to 9.1 logic 7 was installed before this and that fired up fine. on trying to open 9.0 or 9.1 I get the following error
Logic pro quit unexpectedly: opening the report gives the following info:
Process: Logic Pro [268]
Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Identifier: com.apple.logic.pro
Version: ??? (???)
Build Info: Logic-16972300~1
Code Type: X86 (Native)
Parent Process: launchd [88]
Date/Time: 2010-01-15 23:28:12.988 +0000
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Interval Since Last Report: 100998 sec
Crashes Since Last Report: 3081
Per-App Crashes Since Last Report: 35
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/XSKey.framework/Versions/A/XSKey
Referenced from: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
Reason: image not found
Can anyone shed any light on my problem?
Cheers

Have a look through this thread:
http://discussions.apple.com/message.jspa?messageID=9879826#9879826

Paste problem in Logic

You first press command+C to copy, then you press command+v to paste,sometimes it pastes correctly, but sometimes, nothing is pasted and your view has been shifted(moved) to the end of the song,what's the problem?

To copy paste from one region to another Press E to open your Event window. You can highlight and copy all your selections in the Piano Roll window, but you should paste them into the Event window. I use 'Paste at same location' to be safe, then drag the group of notes around. It works for me every time, especially if I'm copying from one project to another.

IWork(Keynote, pages and numbers) doesn't work well about the issue of copy & paste problem

I think so, too. the Keynote 6.5 is not working well on Yosemite (Mac OS X 10.10.1).
In my case, I can't copy & paste from some program(particularly analysis program in my case) to Keynote.
So, when I check coping & pasting the graph or image and so on to Powerpoint and other programs (one of Office is such word and 3rd programs), It works well. However It doesn't work at Keynote, page and numbers.
Also, I tried to do the following process to solve this issue
======
Something is wrong with your installation of Keynote
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using AppDelete.
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and      click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
====
It doesn't work! Anything doesn't change.
In conclusion, I didn't solve this yet!
Plz, solve this problem or fix it!.

This is a double posting, please only post in one discussion at a time.
Keynote 6.5 is stable and reliable under Yosemite for most users.
As with all new operating systems and applications, a small number of users find a few problems.
Copy and pasting text from and into Keynote from all the applications I have, work perfectly: the applications include; Safari, Mail, Word, PowerPoint, excel, Pages, Numbers, iMovie, Photoshop, InDesign, Illustrator.
If you want to place graphics into Keynote, use one of the following methods:
Insert > Coose
click the media button on an image placehoder
click the media button on the tool bar
drag and drop from a Finder window
Copy and pasting images into Keynote is not supported

Copy & paste problem in photoshot CC

Hello,
we have a problem whit photoshop cc and Yosemite system.
The function copy & paste does not work more.
If I try to copy text from pdf(whit editable text) or Preview (with editable text), in a fist moment it copy it, but when i try to copy in photoshop, the program take the command but a few second later it makes to see the message " the appunti are empty or not valid"
Help me please, not is possible that the Adobe have this bug or non solve it
For my work it is very problem
thank a lot
Giambo

Now you're describing a more specific problem with interfacing between Photoshop and Illustrator. I do not have Illustrator or even Acrobat. You could use my way and use Acrobat Reader. If the PDF is not locked it can copy text to the clipboard and that text can be pasted into Photoshop CC 2014 text tool as my append showed.
As I wrote I don't have Illustrator perhaps there are ways to copy layers between it and Photoshop like Photoshop can duplicate layers from one document into an other document. Maybe drag and drop layers between Illustrator and Photoshop. I use a PC so I don't know what bugs there may be in Mac OS versions. Or how they may effect Adobe applications versions.. There are usually more then one way to do things in Photoshop.

Copy & Paste Problems in Logic Pro 8

Similar Messages

Maybe you are looking for