Copy-pasting results in no audio

If I copy-paste an edited sequence from a previously saved timeline to a new one all is well at first glance.
However when I save and close Premiere and then re-open, the clips are there but the sound isn't. What could cause this?

Sorry, I should have been clearer. That is what I''m doing - saving wmp formats etc. as a .mov (I have Flip4Mac installed). However, when viewing the information of the movie within Quicktime, it says that the video is still windows media video.
Still, the problem I'm having is that there is no audio (neither is it registered in the information panel qithin Quicktime). Could it be that the .mov is referencing the audio as opposed to embedding it in the video? And if so, how do I get it to embed the audio? Do I have to use iMovie?
Thanks

Similar Messages

  • Copy/paste automation data in audio regions

    Hi,
    A dumb question but I'm having trouble figuring out...how do I copy and paste automation data in audio regions? When I copy and paste an audio region I like, it pastes down the selected region but without the automation data with it. I've been rewriting the automation data every time to the newly-pasted region but I'm sure there's a simple way to do this. I've looked through the various help files but still am struggling to find the procedure. Any advice is welcome and thank you.
    Respectfully,
    John
    Logic Express 7
    OS X 10.4.8

    OK, for viewers of this topic I figured this out myself. There are two lines in the reference manual that pertain but even they were a little confusing. They read:
    "Option - long clicking on a selection allows you to copy the selection." p.234
    I had success by using the pointer tool and selecting the automation data within the region by holding shift+dragging the mouse over the target data. The data highlights white. Then with the pointer tip on a line of the selected data, holding option+long clicking the selection AND dragging the data while still holding the option key I was able to drag and drop the automation data to a new region in the track. That got me "in the ball park" so to speak but fine tuning the actual drop was necessary to assure precise nodal location. That can be done node by node or better by dragging the entire automation selection as a loop edit.

  • Copy/Paste from Preview Results in Gibberish

    I have found two archived, unanswered threads related to this topic.
    http://discussions.apple.com/thread.jspa?threadID=1743102
    http://discussions.apple.com/thread.jspa?threadID=2226894
    User okinasevych says,
    "For me, I've noticed the problem occurs after I make and save a second annotation (a highlight, to be exact). For whatever reason, the first annotation can be saved without breaking the ability to copy text. After the second annotation and save, the ability to copy text is broken."
    I have found that this is true not only of annotation, but of any saves. For example, if I delete a page from the pdf and save, I can still copy & paste no problem. But if I delete another page and then save a second time, any further copy/pasting results in garbled/encoded text as indicated in the above posts.
    Has anyone found a solution to this issue?

    Hi a,
    I am not reading the post that he wants to do anything with the Cut/Deleted page or info.
    I am reading it that after two revisions any further attempts to manipulate the text results in garbled Text.
    I cannot replicate this behaviour with deleting a page, saving, closing and open the save and deleting a second page.
    The Text I highlighted (And copy/pasted to TextEdit) worked OK.
    I don't use Preview in this manner normally an may have misunderstood the steps.
    Using my 10.5.8 G4 (listed below) and Preview 3.2
    7:37 PM Friday; November 5, 2010

  • Copy/Past from SQL Worksheet with Column Headers

    Is there a way to copy & paste results out of a SQL Worksheet and have the column headers included?
    Message was edited by:
    user640368

    Hi,
    I've never known that this feature has been implemented.
    The feature exchange said that it is Accepted without giving the detail of when would it be implemented.
    http://apex.oracle.com/pls/otn/f?p=42626:39:1324151408296493::NO::P39_ID:5021
    The current release notes don't say anything about this as well.
    My mistake than if it was noted on previous version.
    However, glad to hear if this has been possibly to be done.
    I'll have it a try once I've access to my SQL Dev.
    Regards,
    Buntoro

  • I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

    Question.
    I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
    Thank you,
    Loïc

    Accordion or Tabbed panel should to it, with click and open container.
    Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
    Thanks,
    Sanjit

  • Copying, pasting and editing audio problem?

    hi, i have some audio tracks that i originally recorded in pro tools le
    (no plugin delay compensation if using uad's or other 3rd party plugs dont even go there by the way)
    and have exported them to logic 8 and changed the arrangment for a song.
    The problem is when i cut and paste sections of an audio track to a different part of the song, if i trim, cut, mute or pull it back it changes the part of the audio that i originally pasted it from?
    how do i stop this from happening?
    can anyone help
    thanks

    Once you've copied/pasted the new region to where you want it, select the new region and press:
    OptionCmdF
    You will then be prompted to give a new filename for the audio file. This generates a new file, which can be edited separately from the original.

  • Copy-pasting and lifting audio between projects--no playback

    Hello everyone,
    Every time I copy paste or lift audio from one project to another (i.e. copy, save project 1, close, open project 2, paste), the audio works fine for that session but ceases to play back when I reopen the project later. The audio in the project media / clip selection area will work just fine, but when I double-click on the clip I pasted in the timeline, the clip preview window shows a red field and no audio. This basically means that I'm losing all the edits I made in project 1 and having to re-insert each piece of audio into the project 2 timeline and redo my edits. What's the problem? Is there any way I can copy-paste audio from one project timeline to another?
    (Edit:) I'm using CS6.
    Thanks very much,
    Josh
    Message was edited by: jmclaurin14

    It  wont work  that way because you are playing it out of the Clipboard. which is temporary.
    Usemultiple  Sequences in the same Project instead if you want to do that. to different edits

  • Copy/Paste Audio Configuration doesn't work for me. What am I doing wrong?

    I've read all the other threads on this topic. Some say you have to save before you copy, etc., but nothing works for me. I open up a Logic song that has various Audio tracks, Aux tracks, and VI tracks. I open the Mixer and select Copy Audio Configuration. I close the project file, open up a new blank file, open the Mixer and hit Paste Audio Configuration. The only thing that happens is a single empty track gets pasted, that's it. This couldn't be broken in 8.01 AND 8.02, could it? Tell me I'm doing something wrong, please.

    Hi,
    if you want to copy the actual channel strips, you need to go to the Environment window, select them, press copy, and paste them into the Environment window of the other song.
    Audio configuration doesn't equal channel strips, but refers to how these channel stripes are configured (eg. which plugins they use).
    Or you could create the audio objects (channel strips) you need to use in the new song manually, and then copy the audio configuration, because then that copy/paste process would have some objects to paste the configuration into.
    You could probably even create the audio objects after you have pasted over the configuration, but I haven't checked if this works.

  • The right mouse button on my 8740w has failed (clicks but no result, i.e Cut/Copy/Paste/Delete menu

    My right mouse button clicks but no result, i.e Cut/Copy/Paste/Delete menu does not appear.
    I think the hardware has failed.
    Note the mousepd is not the issue.  The right button is the problem
    Left button works fine

    Same deal with me except the right button has failed twice. You may find that if you push on it past the click with a bit more force it will respond. They swapped the hardware and same thing occurred.
    HP should be ashamed that they would put such awful mouse hardware on its flagship product. Whoever designed it should be fired.
    If HP had any customer loyalty they would offer a hardware update and offer it to those who are still under warranty.
    Suffice to say I will never, ever purchase an HP workstation again.
    Good luck.

  • Exactly how to copy/paste audio?

    I see in the manuals and lessons that you can copy audio from a video clip and use it elsewhere.
    What I'm stuck on is EXACTLY how you copy audio (without the video it is with). I have "extracted" the audio in the clip from which I want to take the audio and identified which bit of it I want.
    I see from the manual how to copy video, by placing cursor just under the play head and dragging. But this brings with it the video, so when I paste I get the audio I want together with the unwanted video which barges out of the way the clip into whcih I want to drop the audio only.
    I am sure I'm missing something simple, but I can ony find guidance on copy video, not audio, althought he lessons lightly say you can do it, they don't say how.
    Anyone can help?
    TIA
    Martin
    Mac OS X Intel Mac OS X (10.4)

    Answered my own question.
    You select by positioning the "audio playhead" in the audio clip in question, dragging it and pressing Coomand-C to copy the audio clip. (I'm guessing this is obvious to Mac users but it's not clear to this pc refugee how to "select" - in fact it's taken days to get to the bottom of this.
    Then position the playhead where you want the audio clip and Edit-Paste, then trim teh excess to get the bits you don't want.
    Actually less intuitive and user friendly than I would have expected, but well, there is it.
    Martin

  • Logic 8.0.2 Copy/Paste Audio Configuration BROKEN

    Logic 8.0.2 Copy/Paste Configuration BROKEN
    When using the Copy/Paste Audio Configuration function of the mixer in Logic Pro 8.0.2 NONE of the plugin parameters are pasted into the new project... The plugins themselves are copied but NOT the settings....

    zmix wrote:
    Why do I bother with logic 8 again?
    It's really sad guys like you and me have to keep asking ourselves this question, but it has to be asked every time we uncover yet another useful and necessary function that got broken with the release of version 8.
    I've said it before and I'll say it again... I don't mind waiting out while Apple sorts through this very much .0 release of Logic, but it would do a lot to calm the professionals dissent if we could have conversations with the developers, letting them see first hand why some things are imperative to using Logic in the "real" world of audio.
    The "tight lipped" approach is doing nothing but losing long time users.

  • Copy and Paste results in decreased video quality

    I'm working on a project that was shot with two cameras. The footage from one is in HDV 1080i60, the other footage is in 1080p24. In the Bin, the footage was in quality HD appearance, and looked the same when I put it in the sequence.
    I then made a second sequence and copied + pasted each individual clip from the first sequence into the second. After rendering, the footage looked like it was at widescreen standard definition. Lots of interlacing, not very smooth motion, a little blurry, etc.
    I do NOT want to have to re-edit this project from scratch (the original footage is still crisp) and need to know if there is a quick fix to this HD to Standard screwup. It's frustrating that something like copying and pasting to another sequence should cause this big of a problem.
    I have tried going into Sequence>Settings in the menu, where I changed the Compressor to HDV 1080i60, but this only made the frame rate really choppy, even after rendering.

    On the second sequence open the sequence settings (Command 0)
    There in the bottom left click on Load sequence preset.
    Choose HDV1080i60.
    OK.
    If the video still looks distorted then do the following:
    Make a duplicate of the sequence as backup.
    Select all in the timeline. Command Option V to remove attributes.
    In the pop up select: Basic Motion and Distort.
    OK
    Is it solved?
    Rienk

  • Copy & Pasting Audio Problem

    Hi Ya'll,
    Every time I try to copy from one location, i.e the end of my project, and paste it to another, i.e. the front of my project, the darn computer will not paste it where I want! It just pastes it at the same location where I copied it from even though I move the play head to the top of my project!
    Is anybody else having this problem? Can anyone help me!!!!!
    Chimpling49Q
    G4 533 Duel, Uggggh!   Mac OS X (10.4.8)   7 year old mac on it's last legs.

    It must be faster than copy/paste?
    Dragging a clip along the timeline takes no effort (from the computer) at all.
    Could you have a RAM problem?

  • Table Drag and Drop/Copy-paste

    Hi all
    I use dreamweaver CS 5.5 on a macmini.
    I'm pretty new to the whole dreamweaver-stuff and use it mainly for converting websites into html. I normally do that via copy-paste:
    Copy text from website - paste in dreamweaver preview - edit in dreamweaver code-view
    Now there's one big problem: If I copy a Table, it doesnt paste it, at all. It pastes just nothing.
    If I drag'n'drop it, it will only paste the data in the cells, no tab, resulting in a huge test without any format in it and useless to me.
    Is this a known problem? What can I do about it?
    Thanks a lot for every help

    The weird thing is, with some tabs it works, with some it doesnt.
    Here's an example, where it doesen't work:
    http://de.yamaha.com/de/products/audio-visual/av-receivers-amps/aventage-series/rx-a3010_g /?mode=model#tab=product_lineup
    section: "technische daten"
    Here, it does work:
    http://ch.consumer.toshiba.eu/de/products/tv/55TZ1175ch#productDetailSpecifications
    Since I am everything but a crack, I have no idea, where the difference is.. hope, this helps specify..

  • Premiere CC 2014 - Copy/pasting effects doesn't maintain stacking order

    For as long as I can remember Premiere doesn't seem to honour/maintain the stacking order of effects when you copy them from one clip to another. This is an absolutely huge issue as most people perfect their video/audio effects on a sample clip and then copy to the others. But what is the point of that process if the copy/paste command rearranges the stack order of the effects!
    For example I generally use Dynamics, EQ and Volume effects on my audio to add some compression and level out my audio. The levels that the Dynamics is taking as 'input' is very important so EQ and Volume effects are most often stacked on after the results from the Dynamics has been spat out. Yet, when I copy/paste my perfected order and settings, Dynamics always drops to the bottom of the stack which produces a vastly different audio result.
    I then need to individually move the Dynamics effect back up the stack on every single clip that I've pasted my settings to. This is a really horrible bug/oversight. While on the topic of bugs, when you add 'Volume' effect to a custom favourites bin, it seems to not be able to be applied from here on subsequent restarts of Premiere.
    Or am I missing something in the copy/paste process regarding maintaining the effects stack???
    Lance

    Thanks Mark!
    I was selecting the individual effects from the clip within the 'Effect Controls' panel and then using the old CMD+C then CMD+V method to copy paste. This does indeed corrupt the stack order.
    Selecting 'Copy' from the right-click menu when clicking on a clip, and then subsequently using the 'Paste Attributes' option from the right-click menu when pasting on a clip/s does maintain stack order, so thank you for this information.
    I would assume that the first method would seem the intuitive option for most people, so it would be great to see the layer stack order maintained regardless of which method you use to copy/paste effects.
    Thanks again.
    Lance

Maybe you are looking for