"copy phone #" button on Treo 650 does not work!

has anyone else experiend this:
when i'm trying to add an unrecognized phone number into my contacts and i click on the "copy phone #" button, nothing happens.
any suggestion?!? thanks in advance!
Post relates to: Treo 650 (Verizon)

I'm having the exact same problem. I also hear the error beep when I try to use that button.
Though using "Add to Contacts", copying the # from there, then deleting the new contact is a possible work-around, it sure isn't efficient.
I just emailed a report of this to customer support, not having found this posting the first time I searched through the forum. We'll see what kind of a response I get back from them. I'm guessing due to the general process of things, and due to other shortcomings of the "Call Log", it might just be easier to find a replacement application? Anyone have any suggestions, preferably free? I didn't see anything appealing at PalmGear (free or otherwise).
(Surprisingly, I can't find any other mentions of this issue, on Google or elsewhere! Though I don't see how we can be the only people with this problem. Just to eliminate the possibility of any conflicts with other software, I did a backup and hard reset, and still had the issue.)
My software version, according to "Phone / Options / Phone Info / Software" is "Treo650-1.04-CDMA", and am running "Palm OS Garnet v.5.4.8".

Similar Messages

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

My iphone5c is still under the 1 year warranty, the top button constantly sticks and does not work properly will Apple still replace my phone even though there is a few chips and scratches on the back?

As Peter says above, only an Apple Store genius can advise you.
But to further clarify, you seem to postulate that if Apple helps you, the cure would be a replacement. That is not necessarily true. Let them look at it and advise you what the remedy is. They may offer you nothing (saying it's your fault), or they may offer you a solution (keeping your current iPhone), or possibly a replacement.

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

HT201412 The top button of my iphone does not work and my iphone froze and wont let me enter the passcode

The top button of my iphone does not work and my phone froze and I'm unable to unlock it. What do i do?

Get the sleep button on your iPhone repaired.

Okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

I just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????

i just bought my first iphone 4 actually i bought two and for some reason on both phones one of the speakers does not work im just wondering if this is normal because i took it back to the store and they told me all of the phones are the same?????

There is only one speaker, what looks like another speaker is actually a microphone. All iPhones only have one speaker down by the dock connector.

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

When I right click on an Item to copy and pasdte it the Copyt button on my mouse does not work with firefox, it works everywhere else...I highlight an item andt

I have tried all the solutions so far. they did not change the outcome. My right mouse will not show the copy command. I am getting the drop down menu when I right click and I can highlight words but when I right click to copy and paste the copy does not work... it was working fine until I did the last update for foxfire.. I have 22.0 version

Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Menu Button to End Workout Does not Work!

I recently got a nike + kit for a new 16 GB Ipod Nano.
I've successfully started and enjoyed several workouts with the kit. However, when I am done with my workout, and I attempt to "end my workout" by depressing the Menu button, nothing happens. It's as if the Menu button does not work. This effectively locks my Ipod in the Nike Plus workout. I've had to reset my Ipod in order to get out of the workout. Needless to say, my workout is not recorded, and I am not interested in constantly resetting my Ipod as a long term solution to ending my workouts.
Any ideas on how I can resolve this issue? I have not tried resetting my Ipod to factory default settings. I do have the latest firmware loaded on my Ipod, and the "hold" switch is not on when this happens.
Thanks!

This just in from Nike on how to retrieve lost run data for Windows users. Once he sends me the Mac version I will post that too.
Hi Shana,
This sounds like it is a really frustrating issue. I would like to help you resolve it.
So far you have done a soft reset on the iPod, turned off spoken feedback, and checked for software updates. If your workouts were saved in your iPod, the following instructions will help you recover them.
If you have a Mac system, please let me know and I will you send you the Mac instructions.
Re-uploading a workout (Windows)
1. Dock your iPod Nano
2. Open Itunes, select your iPod, and go to the summary tab
3. If the "enable disk use" box is not checked, check it and click Apply
4. Open My Computer; go to tools, folder options, and the view tab
5. If "Show Hidden Files and Folders" does not have a green dot next to it, select it and click Apply.
6. Close the Folder Options window and find your iPod on My Computer. It should be listed as a removable drive.
7. Open the following folders to reach your Sensor folder: iPod_Control\Device\Trainer\Workouts\Empeds
8. When you are in the Empeds folder, you will see a folder with a name that matches the serial number on your receiver. This is the Sensor folder.
9. Open the Sensor folder and you will see two folders, Latest and Synched.
10. Open the Synched folder and find the corresponding .xml files (date stamped) missing from your Nike+ account.
11. Move these files to the "Latest" folder. (You can either drag them to Latest or you can use the Edit menu to cut and paste them into Latest.)
11. Close the My Computer window
12. Go back to iTunes and safely un-dock your iPod Nano. iTunes will need to stay open.
13. Reconnect your iPod Nano, then select the check box to "Automatically send workout data to nikeplus.com" and click Apply at the bottom-right of the screen.
14. The missing runs will be re-synced.
If your iPod software is up to date and this continues to happen I recommend restoring the iPod. Keep in mind that restoring the iPod will permanently erase all of the data on the iPod.
If you restore the iPod and this issue continues to happen, please take the iPod to an Apple retail store for technical assistance or call 1-800-263-3394.
If you have additional questions related to Nike+ or if you need to reach Nike+ technical support, please email us or call us. Our phone number is 1-800-379-6453, option 3. We are available 7am -3:50pm PST seven days a week.
Best,
Howard
Nike+/Running Specialist

Thinkpad laptop, red "mouse" button/nub in keyboard does not work with version 4.0, Why?

IBM and/or Lenova laptop computers have the red button/nub in the center of the keyboard that acts with "mouse" functions such as scrolling up and down pages. After downloading Version 4.0 of Firefox this feature does not work anymore. Is it locked in some settings?

i figured it out!
1) go to control panel
2) click on mouse
3) click on the UltraNav tab at the top
4) for the TrackPoint, i have the Enable TrackPoint box checked and the "Use as pointing device with advanced features
5) click on Settings
6) click on settings again towards the bottom right
7) for "Scrolling Type" click on Smooth.
that should work!

OEM 12c: buttons in GUI page does not work

Hi,
I am using OEM12c, we just installed BI publisher last week and we have problem configure it to integrate with OEM12c. One day after the failed configuration, one of the target Authorization Policy Manager (oracle.security.apm) shows down, then we start seeing GUI problems on the console:
1. Under My Oracle Support, all links except for the Community link show blank pages.
2. Buttons in a lot of pages does not work. For example, view/edit/create on the administer page, nothing happen when click on these buttons. This is all overall the GUI, I think in general http post method is not working. Basically the GUI is un-workable.
Any suggestion to how to fix these problem?
Thanks for the help!

Enterprise Manager Cloud Control Workbook for Applying Bundle Patch 1 (February 2012) and 12.1.0.2 Plugins [ID 1393173.1]

I just dwnld vr 6 and now my scroll button on my acer does not work!

i have a acer laptop with the scroll button on my mouse pad.
since downloading version 6 of foxfire, the button does not work!
I have to move the cursor to the right side bar too scroll up and down!

Did you try to turn on the ringer on the lateral switch, right on top of the volume switch? You did not mention on your post.

HT204158 the home button on my ipad2 does not work

Ipad2 home button does not work. Can't do a reset because home button does not work. Help?

Try this calibration procedure:
Open a stock iOS app (e.g., Clock). Once the app is open, press your iPad’s power button until the ‘slide to power off’ screen appears. From that screen, press and hold your Home button until iOS force quits the stock app you have open. You’re done!

My volume button to lower volume does not work

My volume button to lower volume does not work

Take it to the Genius Bar while you are still under warranty and they should be able to fix it. I went, one day after my warranty expired. While they confirmed the problem in my iPhone 5, they said it would be $269 to fix. The tech did helpfully show me how there's a much less convenient softkey workaround using General >Accessibility > AssistiveTouch. Seems to be a common problem.

ITunes 10.6.1 Update button for iOS update does not work (a bug)

iTunes 10.6.1 Update button on iOS device Summary / Version page does not update devices. It only checks the iTunes version!
With iTunes 10.6.1, connect an iPad, iPhone, iPod running pre-6 iOS version.
On iPad Summary / Version page, next to [Update] button the message says:
"A newer version of the iPad software is available (version 6.0). To update your iPad with the latest software, click Update."
However, clicking the [Update] button will not start update iPad. Instead it gives you a dialog saying:
"This version of iTunes (10.6.1) is the current version".
Obviously it should start updating the i-device there but instead just goes and check the iTunes version ?!?
A Bug!
What's really annoying in this bug is that it's the only way to update pre iOS 5.x devices, which is now impossible!
Apple should get this fixed asap!
Anyone found any workarounds?
[Edit]: There seems to be another discussion of this issue already:
https://discussions.apple.com/message/19671173#19671173

Just forgot to add, yes, I know there's iTunes 10.7 but it's only available on Snow Leopard and higher.
The machine in question is an old macbook, running Leopard (10.5.8), that it will propably never get upgraded.
Since most my older i-devices were initially synced with that particular machine, I'll be now stuck with iOS updates, without loosing content.

"copy phone #" button on Treo 650 does not work!

Similar Messages

Maybe you are looking for