Copy Planning KO14

Hi,
I am trying to copy <b>Planning data</b> from period-4 (FY-2006) to period-3 (FY-2007) using KO14 transaction.
After i run KO14 with proper variant it shows that it copied 1000 records. But, when i go and run S_ALR_87013611 to check the copied data. I dont see any data in period-3 (FY-2007)
Is there any way, how do i cross check them ?

Any clues on this post ?

Similar Messages

Copying plan allocation

hello
I would like to built some scenario in CO.
I have 2 versions of planning.
Version 0 is for plannig on CCtr and Internal Orders. On this version I make distribution and assessment of planed data from CCtr to Internal Orders.
On version 1 I want to have copied planned data from version 0. So I have done copying data on CCtr from version 0 to 1 and on orders from 0 to 1. That almost ok. The problem which I have is during copying data from version 0 to 1 especially on orders (KO14) allocated data are not copied. How can I change configuration of CO module to get allocated data on version 1?

Hello,
Please try clicking the Settings button in T.code KO14 and ticking the option 'Copy detailed planning for Cost elements'
Field help is as below...
Copy costings?
Specifies whether detailed planning (costing) is to be copied from the reference version into the new version.
You may only copy the detailed planning if the following requirements have been met:
1. Reference and target fiscal years must be identical.
2. You must copy all periods, that is, you may not restrict your selection to individual periods.
3. Exchange rate type and value date of the reference and target versions must be identical.
4. You must copy on a 1:1 copy basis. This means that you must copy according to the reference.
Thanks,
VR

Copy Planning Function in IP

Hi,
In BPS, for Copy planning function we have an option of :
1)Overwrite existing values
2)Add to Exisiting values.
I couldn't fine the same in IP. even in the to parameters section.
What is the standard behaviour of Copy planning function in IP.
Rgds

Hi ,
You dont have the below in IP. Please check the link for Copy funtion in IP.
1)Overwrite existing values
2)Add to Exisiting values.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/548bafbc0f357ee10000000a11466f/frameset.htm
Regards,
-N-

Copy planning for cost center Runtime error

Dear Gurus,
I am running KP97 to copy planning for cost center.
but I got following runtime error:
===================================================================
Runtime Errors         DYN_CALL_METH_CLASS_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_CLASS
       Occurred on     07.01.2009 at 13:21:25
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGUMD " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_CLASS',
was neither
caught nor passed along using a RAISING clause, in the procedure
"USER_REFRESH_RE_EA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Class "CL_REEX_COPL_MASTERDATA_CHECK" was chosen during dynamic method call,
but could not be found.
=====================================================================
can anybody give me a hint how to solve the problem?
B.R.
George
Hi all, I searched the SAP notes, and found there is one note NOTE_0000632335 related to copy planning, I installed the note by TCode snote. the KP97 can run now, but for the IDES controling area 1000, I tried to test run copy version 0, period 1 to 12 from Fiscal year 2003 to 2004.
there are many records with error.
shall I ignore the error , unselect the test run and continue?
does anyone have similar experience with IDES R/3 4.71? why cannot I carry out all steps in online document for IDES?
B.R.
George
Edited by: George Pan on Jan 7, 2009 11:39 PM

Hi I checked the error with copying plan data. it's all because of 'plan data already exists'.
so I just ignore the error and continue.
thanks!
George

Can not copy planning application in EAS?

the copy option is blanked out for planning application, but fine with other applications.
this is 11.1.2.3, not see this previous version.

You can not copy planning application from EAS (Essbase part).. As the application registration is different for Planning and Essbase only applications. Thats why will not be able to register the planning application from EAS as well...
If you really want to copy Planning application...
Then LCM, Copyapp.bat/sh can help you ...You need to create new Planning application (Not just essbase part of Planning app).
Cheers!
Sh!va

Unable to copy plan data through KP97

Hi,
we are trying to copy plan data from budget to forecast c01 for current fiscal year.We could not copy the plan data. On our investigation we found that if we copy cost centres individually planning data for all but two cost centres are copied. Thus we cannot copy data for two cost centres and system issues no errors either in test run or in actual run.
What could be wrong ? any ideas?
Thank you
Umang

Check the validity of the cost centers. Also check the block indicators in cost center master data.
Regards
Rakesh Pawaskar

We need to copy planning..etc from simulation version 002 to version 000,

Hi experts,
Our simulation Version is 002 and Active Version is 000
We need to copy planning..etc from version 002 to version 000, how to do. Explain me elaborate
Regards,
moon

Hi Moon,
There are two things in Copy Version Management.
1) Copy the master and transaction data from active to simulation version.
Transaction - /SAPAPO/VERCOP in this you can not copy from Simulation to Active.
2) Merge the Planning Versions.
Transaction - /SAPAPO/VERMER in which you can copy the planning area keyfigures from simulation version to Active Version.
Regards,
Saurabh

Copy Planning Plant to Sort field in Maintenance Plan

Hi All,
Is there any User Exit User exit is available to Copy Planning Plant to Sort field in Maintenance Plan.
Regds
Vinit

I think it is not possibe as the sort field in maintenance plan is a customizing field. you can not enter any value in the sort field but you in SPRO first you have to maintain the values for sort field.
The sort field in order and notification, there you can copy the planning plant or anything else as they are manual input fields

APIs for achieving CJ9BS "Copy Planning" transaction.

Hello,
I have to achieve the functionality of CJ9BS "Copy Planning" from version 0 to version 2. I can achieve this by using CJ9BS transaction. Would you guys know of an API that can do the same.
Thanks for all your help.
Best Regards
Sumit.

Hi Sreekanth
It is so strange...No, I've not activated actual values for Target version X. In customizing TC OKEQ the Actuals flag is not checked on Target version X.
Could you explain me why I've actual values in Target version X only for those WBS elements I've put in the CJ9BS transaction?
Thanks
Giovanna

Error in Step Copy Plan version in Process Chain

Hi all,
We have step in Process Chain called 'Copy Plan version'.This stet is getting failed quite frequently. I just repeat it and the error is getting solved. I just wanted to know that is there any permanent solution for that. We cant afford to getting it failed that frequently.
I dont have any idea about this step. Can you please provide me information about this step and a possible remedy aw well.
The error messaage is :
Selection accesses data that is currently locked; user
Job cancelled after system exception ERROR_MESSAGE.
Please suggest.
Regards
sunny

This is due to "Selection accesses data that is currently locked; user" , there is another process from another process chain which locked the object at the same time frame , so due to that this step is failing
you can increase waittime 30mins(example)before this Step Copy Plan version executes in the process chain.
OR, change the schedule time for this process chain

Copying Plan Assessment Version from V0 To Z1

Hi All,
Need assistance in how to Copy & run plan assessment in a different version fom V0 to Z1
I have copied tried copying planning data (KP06) using transaction KP97, however it did not transfer the assessments we had established via KSU9 in version 0 for our building and IT.
Can any one help me in copying plan assessment version from one to another.
Thanks In advance
Arun

Hi,
This is standard SAP behaviour (read note 15966); you have to execute the assessment cycles in the target version separately.
Regards,
Eli

Copy planning hierarchy from info str.-

Hi,
Pls. guide on following issue-
We want to copy planning hierarchies from Eg. info str.SXYZ to SABC(both info str. have all common characteristics except one ) .Is it possible? If so can it be done automatically?
Points will surely be awarded.
Regards

Hi Mrunal
You can copy the charcterstics form one info structure to another
please use transaction type MC21 and give thre reference info structure
in case of the single cvharcterstics which is different, you can then modify in the new created structure
hope this helps
thanks
akasha

Copying Plan to budget (IMCCP3)

We would like to exclude values on certain cost element when copying plan (ECP) to Budget with transaction IMCCP3.
I can't find any valueable UserExit on this purpose.
cheers
matej

Hi
look for these user exits, may help you .
ALE00001 ALE user exit
BBPBUDGT Change Account Assignment for Budget Determination
COOMKPLV User Exit: Copy Actual to Plan and Copy Planning
Thanks,
Dhruv Kumar Malhotra

Copying Plan Values

Hi All,
We wish to copy plan values from one cost center to multiple cost centers...
When we execute Copy Data Manager Package - We cannot specify one cost center in source and multiple in target...Hence we need to execute the DM package thrice...
Any better way to meet this requirement?

Hi Shibu,
This is a limitation in the standard Copy DM package.
You might want to create a script logic to handle this kind of copy and call this script through a DM package.
Hope this helps.

Error While Copying Planning Area

Hi all,
I am in the process of creating a new planning area by copying 9ASNP03. But while i copy the system throws the following error "Planning Object Structure ID 9ALA is invalid". Also 9ASNP03 is not active.
Please help me out with this error.
Regards,
Arun

Hi Arun,
Please activate the POS 9ASNPSA linked to the Planning area 9ASNP03 or any copy of 9ASNP03.
Once you activate this POS 9ASNPSA, you can just copy the inactive/active Planning area 9ASNP03 to custom.
This would solve your error "Planning Object Structure ID 9ALA is invalid"
Regards,
Nawanit

Copy Planning KO14

Similar Messages

Maybe you are looking for