Copy project clip with voice over from one project to another

Hi,
I would like to copy some part of the project clip into another new project. I would able to copy Video and its sounds but not external voiceover sound which is attached to the project.
Can anyone please tell me how to copy voiceover part as well with video?
Reg,
Sri.

Steve,
Thanks for the mention of the Project Archiver. As I normally set up Projects on externals, in anticipation of migrating them between my computers, I had just not thought to mention that. The OP will benefit from that tip!
One thing for the OP to remember is that many systems will not boot properly, if a thumbdrive is attached first. Many USB devices get in the way, if plugged in and turned on, prior to boot up. My Epson printer MUST be turned OFF, or my laptop will not boot. Many have had the same thing happen with most thumbdrives too.
Appreciated,
Hunt

Similar Messages

  • I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

    I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all.  Obviously some setting has changed but I can't find which one.

  • How do I copy the same app folder layouts from one device to another? We have a several iphones and ipads.

    how do I copy the same app folder layout from one device to another. We have several apple devices.
    It's a challenge when syncing a device for the first time to go through all the apps and apply them back to the same folders as on your other iphone.
    I've seen suggestions of taking pictures of the correct layout, then manually applying it to the new device. Big time waister.
    What's the work around?
    Thank you

    I'm afraid there is no short workaround. One thing that you could do if you were REALLY desperate is reset your device to factory settings and then restore it from your other device's backup, but that is rather risky and you probably don't want to take your chances just for folder layouts. I would just do it manually.

  • How do I transfer a voice-over from one project to another?

    I cannot COPY the voice-over from Project #1 and PASTE it onto Project #2.
    I've got to believe this is possible without re-recording the voice-over.
    Any suggestions?

    Hi
    No and Yes
    There is no elegant solution - as it should be
    But in Project A - Export out as QuickTime .aiff (Share to QuickTime/Expert mode/Audio only)
    Import it into Project B
    Many elaborate sceens are made by Export / Import method. But still it use to work.
    Yours Bengt W

  • How to copy attributes (as in which playlists) from one song to another

    Hi,
    Does anyone know how to copy the characteristics of a song--as in which playlists it appears in--from one song to another, so that the new song then appears on all those same playlists also? Or, if not, maybe you have some other idea for me:
    I'm working with a Mac. I have several hundred playlists with ~100 songs each, and about 3,500 songs in my iTunes. Most of these songs are currently AACs. I've realized I have a problem: If I want to burn disks with MP3-format songs, I will need to convert the AAC to MP3s to burn them. If I don't want to have thousands of duplicate songs, I will need to trash the AAC versions of those songs from my library. If I do that, they will disappear from the playlists they are currently in (one song might be in 20 different lists). If I had to manually take each MP3 version created, look at which playlists the original AAC version is in, drag the MP3 version to each playlist, and delete the AAC version, it would take a Looooong time. Does anyone know of any shortcuts? For example, is there some way to copy the information about which playlists a given song is in and then paste that info onto the new version so it now appears also in these playlists? Or some other idea? Thanks very much!
    Molly

    Never heard of any way of doing that. However, you may want to check out Doug's Scripts. There might be something there to help.
    http://dougscripts.com/itunes/index.php
    Best of luck.

  • How to copy very large number of files from one drive to another???

    I'm a fairly experienced Mac user for serveral years but this problem really has me stumped.
    I'm trying to copy or move 152,000 files from one external drive to another drive. I can highlight (Cmd - A) all the files on the first drive and drag them to the second drive but Finder always shows 32,768 files being copied no matter what I try.
    Any and all suggestions on how to move/copy a large number of files from one external drive to another are greatefully appreciated.
    Thank you in advance,
    Mack

    I would use the command line tool rsync.
    For instance with: rsync -av source-dir destination-dir
    -a The files are transferred in "archive" mode, which ensures that symbolic links, devices, attributes, permissions, ownerships, etc. are preserved in the transfer.
    -v Verbose, so you see the progress.
    Rsync is fast and really, really powerful and many times used in shell scripts and the like to automatically backup and/or sync stuff. Google a bit for more info.

  • Best LKM to move data from with in Oracle from one schema to another Schema

    Hi Gurus,
    What is the best KM to move data from one schema to another schema within same oracle database.
    Thanks in advance

    Dear,
    If your source and target are on the same database server then you dont need LKM.
    You have to 1. create one data server for the database server
    2. Create one physical schema for your source and another physical schema for your target under the above created data server.
    3. Then create models for each above created physical schema
    In this case you just need IKM knowledge module
    Please refer http://oditrainings.blogspot.in/2012/08/odi-interface-source-target-on-same.html
    If your source and target are on different server then you must create two different data servers in topology. You have to use LKM.
    The best LKM to use is LKM oracle to Oracle dblink. But you should have proper grants to use it
    If your source has very few records you can go with LKM SQL to Oracle other wise use LKM oracle to Oracle dblink

  • How do I copy a GarageBand for iPad part from one song to another?

    Surely this must be an obvious thing, but I see no way to do it.
    I am working on 2 versions of song on my iPad. I want to copy a part from one song to the other.
    I know I can duplicate the entire song, but that is not the same.
    I really need help on this one and I'll be most disappointed if it's a basic feature Apple have not provided - I'm writing a soundtrack and at the moment and bought the app and to some extent the iPad especially to write on the road, but this will mean we have to abandon GarageBand for iPad entirely if its not possible.
    The other secondary question is why can't you copy parts (using Sonoma copy/paste or similar) OUT of GarageBand into other apps? Another basic function Apple should not have skimped on. This is necessary to, say, apply an effect externally and bring it back to GarageBand for mixdown. I'll raise this separately too.
    Thanks!

    Hi  Here is a guide I wrote about bouncing tracks in GarageBand for iPad.  You could use the methods in here to bounce the track you want to open in another app in to Hokusai , into your other app, and then back into GarageBand.  I hope this helps!   Cheers
    http://ipad.slapWagon.co.uk

  • Isues copying a Lightroom 5.5 catalog from one computer to another.

    Hi all,
    I have the following weird issue, see if somebody can help. I have to computer (an iMac and a MacBookAir), both running the same version of the OS (latest at this moment). I have also Lightroom 5.5 running on both computers. I want to bring one of my catalogs from the iMac to the Air, and for that I copy the catalog files and the photos over. The weird thing is that when I try to open the recently copied catalog in the Air, Lightroom ask to convert it to Lightroom 5 first, like if it comes from an older Lightroom release. It is a Lightroom 5 catalog already! How come? If I proceed, it created a new version of the catalog (with a 5 at the end), but when it finally opens it's not really the same, missing collections for instance. Any ideas of what could be wrong? I've done exactly the same with some of my other catalogs, and everything is fine.
    Thanks a lot in advance!
    Xesko.

    It appears that all the color ratings have been set to white and are no longer red, blue, purple...

  • Copy and Paste audio track MIX from one track to another??

    Hi
    What's the best way to handle this.
    I have a video with one long music track, that I mixed using Adobe Premiere's Audio Mixer.
    The musician made a new version of the track with some very slight modifications in the music.
    Rather than having to remix the entire new track, I would prefer to either:
    1) Copy and paste the attributes of the orginal audio track onto the new music track -- retaining the Mix I did from the original mix.  Is this possible?  I tried it once and it did not seem to work.  (I used the Mixer, not keyframes, to do all of the mix.)
    or
    2)  Is there a setting in Premiere's Audio mixer to "gang" the new track to the old one -- with the new track cloning the old track's mix.
    Or would it be better to bring the two audio tracks into Soundbooth and do it there?
    Thanks,
    ...Rowby

    Thanks Colin
    I did a complicated mix on one long background music track and was not looking forward to doing that remix because of various minor music changes made by the musician scattered throughout that long track.
    Your Alt (for replace solution) worked perfectly and saved me a ton of time.
    The fact that Copy attributes for Audio doesn't work for copying audio keyframes is another reason do do audio mixes using the Mixer instead of using keyframes to adjust volume.
    ...Rowby
    P.S.   And a big LIKE to Adobe's clever programmers for including features like these.

  • Copying/Moving new Motion 4 Templates from one computer to another

    I want to move added Motion Templates from my Mac Pro to my MacBook Pro to take on the road with me. These were originally created in Motion 3, I opened, converted and saved into Motion 4 and now need to copy them over.
    How do I do this accurately and wholly so they work fully on MacBook Pro?
    Thank you for any help

    User/Library/Application Support/Final Cut Studio/Motion/Templates

  • Please help. Why aren't my hyperlinks moving over from one document to another?

    Firstly I'm using Adobe InDesign 5.5
    I have document A, which has over 50 pages.
    Then document B, with over 40 pages.
    All the pages on document B, I want to 'move' over to document A, so document A will now have 90 pages and I'll no longer need document B. The issue is, when I move the pages over, the hyperlinks I have throughout document B don't move over (which there are over 30 hyperlinks on certain sections of certain pages).
    Now it seems like the only 'slow/safe' process of doing this, is to copy page 1&2 of Document B, and then 'paste in place' on document A, and then go back to B and copy pages 3&4. this is a long process...considering I have over 2,500 pages to get through.
    Why aren't the hyperlinks moving over? When I go back to document A, I click on the hyperlink tab and it's blank.
    It's really annoying and I'm trying to figure out why this is even happening and can't find any solution online.

    You should save both documents before doing that with Save as into the same folder, so thel links will not change.
    I would recommend to package your files after doing that.

  • Facing Problem with passing Values from One report to another

    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

    sorry for the late updation.
    My First Report, Summary level is a Pivot Table.
    I tried the same report with Table option, the value is passing correctly.
    Is there a way to get rid of this situation using Pivot table.
    Thanks for your help.
    below is the original request.
    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

  • Is there a way of swapping all data over from one ipad to another ipad and vice verse?

    Another family member and I both have iPad 3, they have with 3g and mine just wifi. We are discussing swapping so I can have the 3g feature as its more useful for me. Is there a way of swapping all their data to my ipad and my data to their ipad so it is a straight swap?

    What you want to do would be no different that restoring your current content to a brand new iPad. You should both do as described below and then erase your respective devices and make the swap.
    First ... and you both want to do this.... Transfer purchases from your iPad into iTunes on your computer, backup the iPad and then sync with iTunes.
    These two articles will explain how to do that.
    Transfer purchases.
    http://support.apple.com/kb/HT1848
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    You may want to import photos from the device to your computer as well so that you can sync them back at a later time. Your camera roll photos are stored in the backup, but it never hurts to be proactive.
    Read about importing photos here.
    http://support.apple.com/kb/HT4083
    After you have transferred purchases, backed up and transferred photos, you can erase your iPad before you swap devices. Settings>General>Reset>Erase all content and settings. That will completely wipe your devices.
    Now you can swap and you will both be starting from scratch like you did when the iPad was new.
    When you re-activate the new iPad, the one you are getting from your family member - toward the end of the activation process you will be given the opportunity to restore from an iCloud or iTunes backup. You want to select the iTunes option. So you will have to connect the iPad to your computer's iTunes and restore from the backup and then sync with iTunes.
    Restoring from the backup will recover all of you app data and settings, syncing with iTunes will recover all of your apps, books, photos, music and other media

  • How can I copy develop settings on multiple images from one folder to another?

    I have a bunch of Fuji X-T1 raw images that I have converted to DNG form. Once Lightroom supports X-T1 raw images directly, I would like to replace the DNG files by the corresponding raw files (which I have saved) without having to redo all of my edits.
    I've tried an experiment with a NEF file, which Lightroom supports: If I convert it to a DNG file, import the DNG file, then replace the DNG file with the corresponding NEF file, Lightroom still thinks the file is named DNG. This behavior makes me nervous.
    So what I would like to do is to import all of the Fuji raw files, then transfer the develop settings from each DNG file to the corresponding raw file, then finally archive and delete the DNG files.
    Is there any way to do this other than by hand? That is, if I have a folder with a few hundred DNG files, is there any way to tell Lightroom to take the develop settings of every file in the folder and transfer them to the correspondingly named file in the folder of raw files?
    If not, can someone suggest to me a way of accomplishing this that does not involve copying and pasting the data for every image by hand?

    The Syncomatic plugin is designed for thus type of task to - see http://photographers-toolbox.com/products/jbeardsworth/syncomatic/

Maybe you are looking for