Copy query with all language-dependend settings

Dear all,
this is my first post message in SDN.
I want to copy a query ("query_a" => "query_b") without loosing my translations of the key-figures, structures and cell definitions.
If I use the query designer, these texts will be only copied in my logon-language.
If I use the transaction "rszc", all language-dependend texts will be copied - very good - but I have no influence on the technical name (the new name would be "query_a_1", but I want to have "query_b"!).
We use BW 3.5
Best regards,
Christoph Riesel

Dear Venky V,
thank you very much for your quick reply.
If I use "save as..." in the query designer,
the language-dependend texts especially the cell definitions will only be saved in the language that I'm logged on; but I don't want to loose my translations.
Regards,
Christoph Riesel

Similar Messages

  • How to copy infocube with all the transformations?

    Hi,
    how to copy an infocube with all its transformations?
    or could i renamed / give other technical name to the cube?
    thanks.

    >
    einie zainal wrote:
    > Hi,
    > how to copy an infocube with all its transformations?
    > or could i renamed / give other technical name to the cube?
    >
    > thanks.
    After Create InfoCube, a screen will appear for you to key in information/name of the InfoCube. There's a box "Copy From", insert the original InfoCube name you intend to copy from.
    After successfully activation of the new Infocube. Return to your old InfoCube, right click on its transformation, click on Copy. A new screen will appear, here you will key in the new Infocube name in the Target of the Transformation field.

  • Copy GUI Status with all languages

    Hi,
    this is my situation:
    I copied an existing GUI Status (function group SALV, status STANDARD) to a newly created report. Original languiage for the status is German, for my report is English.
    Only the German texts have been copied.
    How can I copy all existing languages without changing the original language of my report?
    TIA,
    Clemens
    P.S.: Easily get rewards!

    Hi Clemens,
    I am afraid you need to do one by one.
    Please go to SE41 and give the program name and status name. In menu choose GO TO ->Translation.
    or try t/code SE63.
    Hope this will help.
    Regards,
    Ferry Lianto

  • Require a query with all clauses

    Hi All,
    I have been asked for a query to write by using all sql clauses like group by, where, having, order by in a single query. I just wrote the below query but I did not get out put. Please do correct where I am missing.
    select deptno, max(sal) from emp group by deptno having  deptno > ( select distinct deptno from emp where deptno >= 20)
    Thanks for your time and info.

    1007912 wrote:
    select deptno, max(sal) from emp group by deptno having  deptno > ( select distinct deptno from emp where deptno >= 20)
    Logically it was wrong; as your sub-query will return more then one record for comparison. By the way if you are querying the same data from same table then why you need a sub query in having clause! No need of it. Even if you are not using any aggregate predicates then use it with where clause.
    This is how your query and output should come out!
    SQL> select
      2   deptno, max(sal)
      3  from emp
      4  where deptno >= 20
      5  group by deptno
      6  order by 1
      7  /
        DEPTNO   MAX(SAL)
            20       3000
            30       2850
    SQL>

  • Recovering a ldap database with all workgroup managers settings?

    Sorry if this has already been posted. I updated my x.4.7 server to x.4.8 and all went down hill from there. The xserve would no longer boot up. I created a new open directory master and left my raid that would not boot in my xserve. I can see everything on the drives like nothing is wrong but I do not know how to recover all of the ldap and workgroup manager settings. Lost a lot of work. Any help on this would be great. Sorry if this does not make sense, which I hope it does. Oh yea and part two of the question is it is named the same thing and same ip address but does not want to pull computer lists now. I have over 500 computers now just pulling the old settings. How do I make them refresh and see the new server? I don't want to go to every single computer and remove the mcx from netinfo.
    Thanks for any help.

    Anyone?

  • How do you re-install Lightroom 5, with all data and settings, if your drive has crashed?

    I have a virus which may mean I will have to wipe my HD and re-install software.
    I am concerned about losing data and settings when I re-install LR5.
    Is everything recoverable through the LR catalogue?

    So who do I believe?
    Blog:  http://www.jamoroki.com
    James King
    about.me/jamoroki
      <http://about.me/jamoroki>

  • Why does "itunes accounts" use data with all settings OFF?

    Does anyone know how to keep "iTunes accounts" under system from using cellular data?
    I have already:
    1. Toggled OFF all settings in the "Use cellular data for" menu.
    2. Turned OFF all automatic downloads and any other options under iTunes/app store settings.
    3. Turned OFF Background App refresh.
    4. Turned OFF all options under iCloud sync menu.
    Right now, the only thing that keeps "iTunes accounts" from pulling cellular data is turning Cellular Data completely OFF, but I don't want to do this because I lose some messaging and voicemail functions and I need to be able to use Find My Phone. I have two identical iPhone 5c's on this account. One is running iOs 8.1.2 and the above settings control it's data usage nicely. The other phone is running iOs 8.1.3 and this one uses 50-100 mb a day even with all the above settings off and the phone almost always on wifi.
    I am aware that the phone will lose it's wifi connection when asleep, but that shouldn't be a problem if all the apps/settings are already set not to use cellular data. What am I missing. I've read a bunch of threads on this issue and they all suggest settings I already have OFF.

    My personal phone is on 8.1.2. My daughter's phone is 8.1.3.
    It is her phone that is currently having this problem, but I reported it under my account; sorry for the confusion.
    My phone has had some data problems in the past, but I have been able to control them by keeping almost all data options OFF and the overall switch ON. My usage is back to less than 50 mb per month which makes sense since my phone is almost always on wifi and I don't use data dense applications.
    Everything about my daughter's phone is the same as mine except for the 8.1.3 upgrade. She does use things like Instagram more than I do, but I have them all set to not use Cellular Data and the option to change these settings is locked. When I look at the usage on her phone, it isn't her apps that are pulling unexpected data; it's "iTunes accounts" under system services. All the options under iTunes/App Store (auto downloads, home sharing, etc.) and all the iCloud options are already OFF.

  • Upgrading HDD on new MBP 15" and transfering all Data and settings from 2011 model to 2012 one

    Hi all,
    I have just purchased a new 2012 MBP 15" (Non-retina) machine as well as a hybrid 750GB drive from Seagate and 16GB RAM upgrade from Crucial. Both machines are running the latest versions of Lion. What I would like to do is the following:
    Upgrade the HDD & RAM in the new 2012 MBP - I think it is the same procedure as the 2011 model (which I have already done using Carbon Copy Cloner)
    Transfer all the data, settings, programmes files, docs etc to the new 2012 MBP and new drive
    Q1. Would I have to clone the current HDD in the 2012 MBP with the new hybrid one first and then install into the machine before transferring the data from the 2011 machine?
    Q2. Or - Could I just clone the current HDD in the 2011 model using CCC to the new Hybrid HDD and then instal it into the new 2012 MBP?
    Whats the best and safest way to achieve this please? Any advice very welcome!
    Many Thanks

    So, everything went fairly well. It started out looking like it was going to take 2.5 hours, but it ended up taking about 5-6 (I think - I went to sleep).
    A couple of observations - at first I didn't see where it restored everything, but I later saw that when I logged out that it had created my user account as a separate login.
    Some things didn't transfer - most everything did, but there were a few things with my Parallels VM that did not. I have to get to the bottom of that. It did make me re-register once I launched it.
    On the hardware specifically:
    1. I am not yet noticing the performance bump that I thought I would going to the i5 processor - seemed snappy when I first had it on with OS only - but so far not noticeably faster than my Core 2 Duo 2.4.
    2. battery - way too early to tell, but I am hoping the battery needs time to condition itself and figure out who it is (battery life was my #1 reason for buying this) - right now I am on battery power and have 79% remaining or 2hrs. 2 hours??!! This is supposed to be a 8-9 hour battery. Hoping time works this out. Brightness if only up about 20%, on wifi, keybaord backlighting fairly dim. Nothing coming over from my old machine would have affected this, would it have? (I do know that when the machine was empty with just the OS on it, it was reading about 8 hrs remaining). So much for living on the edge and going to the office without my power adapter today.
    3. Heat - my 13" was not hot on the bottom - this one is - on the back left part of the unit. Reminding me of my Powerbook G4. Not very lap comfortable. ??
    Any thoughts?

  • Input query with dynamic actual & forecast values by month per year

    Hello,
    I am working on a Input ready query for a forecasting application which shows both actuals and forecast numbers and the user will revise the forecast numbers by month
    Requirement: I want to build a Input query for monthly forecasting for the current year. It will be dynamic rolling of months with actuals & forecast data.
    E.g. My report has 12 months for the current year
    and if run the report in May, the months before May has to show the actuals and the months after May has to show the old forecast data so that the user will revise the numbers again in each month and save the data to the real time cube.
    Jan.Feb.Mar.Apr.May.Jun.Jul.Aug.Sept.Nov.Dec
    Act Act  Act Act Act  Old frcst for the remaining months
      user will revise forecast for these months
    So, i am able to create Input query with all restricted key figures( plan kf has change mode set to change, actual kf are not set change) and calculate key figures and all the logic is done on dynamically moving/rolling the data based on the input month of the year.
    But the problem is that i am using cal kf to dynamically roll months, i was not able to set the change option for the cal kf.
    So, how can i make sure that the dynamically changed plan months will open for entering forecast and the actuals months not to change?
    Do you guys have any better solutions in implementing it?
    I really appreciate it your input....:)
    Thanks,
    Srini

    Hi,
    Please look at the following DOC which may be useful to you and if so please grant me point.
    Regards,
    SUbha'
    Input-Ready Query
    Use
    You use input-ready queries to create applications for manual planning. These can range from simple data entry scenarios to complex planning applications.
    Integration
    You define a query that you want to use for manual planning in the BEx Query Designer (see Defining New Queries).
    In the Web Application Designer or the BEx Analyzer, you can combine the input-ready queries with other queries and planning functions to create complex planning applications.
    Prerequisites
    You can define an input-ready query on any of the following InfoProviders:
    &#9679;     Aggregation levels (see Aggregation Levels)
    &#9679;     MultiProviders that include at least one simple aggregation level
    The aggregation levels are created in the planning modeler; MultiProviders are defined in the modeling functional area of the Data Warehousing Workbench.
    Features
    Definition of an Input-Ready Query
    Once you have defined a query on an InfoProvider, you see the Planning tab page under the Properties of structural components (for example, in key figures or restricted key figures). The options provided there allow you to determine which structural components of an input-ready query are to be input ready at runtime and which are not. With structural components that are not input ready, you can also determine whether these components are viewed as reference data or are just protected against manual entry.
    For the structural components, you also have the following options:
    Input readiness of structural components of a query
    Option
    Description
    Not input ready (reference data)
    If they are being used as reference data, the structural components are not protected by data locks to ensure exclusive access for one user because this data serves as a reference for many users.
    This is the default setting.
    Not input ready (no reference data)
    If you want to protect structural components against manual entries but allow changes by planning functions, you can use locks to protect this data for one particular user. In this way you can ensure that the planning function works with the displayed data only and not with data that has been changed by other users.
    Input ready
    You can also determine whether an input ready query is to be started in change mode or in display mode. You find this property in the Query Properties on the Planning tab page. If there is at least one input-ready query component, the query (as long as it has not been determined otherwise) is started in display mode.
    In BI applications that use input ready queries as data providers, you can enter data manually at runtime. For more information, see Performing Manual Planning and Creation of Planning Applications.
    Example
    You want to create an input-ready query for manual planning for a plan-actual comparison of revenues for a set of products. You want the plan data in a real-time-enabled InfoCube and the actual data in a standard InfoCube.
           1.      Create a MultiProvider that includes the InfoCubes for the plan and actual data.
           2.      Define an aggregation level on the MultiProvider which contains the characteristic Product and the key figure Revenue.
           3.      On the aggregation level, create two restricted key figures Plan Revenue and Actual Revenue. For restriction, choose the characteristic 0INFOPROV and restrict it to the plan or actual InfoCube.
           4.      Add the restricted key figures to the key figure structure. Insert Product into the rows. For Plan Revenue, choose Input Ready for the input-readiness option. For Actual Revenue, choose the option Not Input Ready (Reference Data).
           5.      In the query properties, set the indicator that determines whether the queries are started in display or change mode as required.
    Example of an input-ready query
    Product
    Plan Revenue
    Actual Revenue
    P01
    20
    P02
    30
    If you want to keep actual and plan data in a real-time enabled InfoCube, you do not require a MultiProvider for the task described above. Create an aggregation level on the InfoCube and define the input-ready query for the aggregation level. In the example above, a version characteristic acts as the InfoProvider. Create restricted key figures with the plan or actual version and proceed as in the previous example.

  • SCCM deployment Win7 with multi language pack & software update languages

    In our company we have a running SCCM infrastructure and deploy Windows 7 x64 (en) with all language packs. Now we integrate the software updates management process into SCCM.
    My question is: Do we need to download and synchronize the software updates in all available languages or is English enough?
    Thank you very much for your support!

    Hi,
    We don’t suggest deploying all language packages in one time. You may deploy default language and let users choose which language
    package to install in Windows Update to save the network traffic.
    Regards,
    Sabrina
    This posting is provided "AS IS" with no warranties or guarantees, and confers no rights. |Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
    This can be beneficial to other community members reading the thread.

  • Copy users with their Org assignments

    Hi,
    I'm working in a SAP system in which SAP Users are directly linked to Positions (for indirect role assignment need).
    Is it possible to copy users with all assignments ?
    All tests done using SU01 only copy User's data without their assignments.
    Thanks and regards.

    Srihari Rao wrote:>
    > > When I create a user copy, in the popup window I can choose to copy or not user's reference but I do not see how to include Organizational Assignment links
    >
    > Hi,
    >
    > When the roles are copied from the user, the org levels are copied too (if maintained in the roles of the user).
    >
    > ex: user1 has roles assigned to him which have Org levels maintained for it.Now when you copy the user1 data, say for user2, and you select "Roles" from the copy options... the user2 will get the same org levels that are available / restricted for user1.
    >
    > Hope am clear.
    Clear yes, relation with the original question, no.
    Gaetan  is talking about the position in the organization to which the USERID is linked. I personally think there's no way to copy that along with the user.
    You can link the copied user to the same position the original user had/has. But that would always be an extra action as far as I know. (This is another one were I'd love to be proven wrong....)
    If you have to copy a lot of users maybe you can ask in the HR forum(s) about automating the organizational assignment with ecatt.

  • 0actiontype_text with deffirent language

    Hi
    I have  text with 0actiontype_text 
    at rsa3 showing 171 records
    when i check psa showing 18 records only.
    171 shwoing with all languages? my requirement is aksing restrict action type 14 and 17 also, this action types are not available at english language? its available only german language?
    please let me know solution

    Hi,
    I just checked in my system I give 0actiontype_text in RSA3 and given
    LANGU = EN and executed it is showing data and I have action type 14 and 17 also.
    Check data in Base tables if you know.
    Thanks
    Reddy

  • I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

    I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Moved report server to new machine with all old settings

    Dear all,
    I am going to moved to new server machine for SSRS and i have 200+ reports ,,
    i have configure report server in new machine but reports configuration pending
    i thought i would need help of others to do this because i have a quetion? that
    How can moved my 200 reports to new machine with all configurations includes 40 subscriptions , and much more 
    with parameter values setting ??
    is there simple way?? rather than doing one by one ..
    like i just copy mu old report server to new report server.. 
    Help me please ??
    Dilip Patil..

    Hi Dilip,
    After testing the issue in my environment, we can try to use the RS.exe utility to execute a Reporting Services RSS script that copies content items and settings from one SQL Server Reporting Services report server to another report server.
    To achieve this goal, please refer to the following steps:
    using the RS.exe utility Download the script file from the CodePlex site
    Reporting Services RS.exe script migrates content to a local folder, for example c:\rss\ssrs_migration.rss.
    Open a command prompt with administrative privileges.
    Navigate to the folder containing the ssrs_migration.rss file.
    Run the following command to migrate contents from the native mode Sourceserver to the native mode Targetserver:
    rs.exe -i ssrs_migration.rss -e Mgmt2010 -s
    http://SourceServer/ReportServer -u Domain\User -p password -v ts="http://TargetServer/reportserver" -v tu="Domain\Userser" -v tp="password"
    Besides, if the destination report server is SharePoint mode, we can also try to use Reporting Services Migration Tool to achieve your requirement. For more details, please see:
    http://msdn.microsoft.com/en-us/library/dn600370.aspx
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • 3.1EA2 Old bug with German language settings still exists

    In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
    In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf
    I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
    Edited by: user1775992 on 22.11.2011 03:30

    I have raised a bug on this issue and I am actively looking into it.

Maybe you are looking for