Copy Rate from MM Codition Type to SD Condition Type for SD invoice.

Hi,
I want to copy the rate of conditon Type (P101) from STO to one of the condition type in SD proforma Invoice, this proforma Invoice is created based on the delivery document for the above said STO.
How this can be done.
Thanks
Savi

Hi Priyanka,
Thanks for clue, I tried same as said by u. but while maintaining value in condition type following error is coming.
Entry A EF P101 does not exist in T685 - check your entry
Message no. 00058 (I checked cond.type is there & working fine for MM)
Diagnosis
Input values must be defined in Table T685. The value or values 'A EF P101' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
I think along with this some additional settings may be required with in both of condition type i.e. source condition type & Target condition type.
Please look in to the same & advice.
Thanks
Savi

Similar Messages

Copy value of condition type to another condition type *Not Percentage*

Hi SAP community!
How can I copy the value of a condition type to another condition type in my pricing procedure? The rules are that these conditions are not Percentage. The calculation type is Quantity for the two conditions.
I want to copy the value of condition type PMIN (Minimum Price) to another Z condition type.
Thank you all

Hi Lakshmipathi;
In fact, there are two Z conditions that I need to have with the same value of the PMIN. I 've maintained my pricing procedure this way:
For the PMIN, the step is 320
For the ZPV1, the step is 920 and I put in "From " field 320 and in the "To" field 320
For the ZPV0, the steo is 925 and I put in "From " field 320 and in the "To" field 320
But when I looked the Conditions Tab in the sales order there is no value copied to the Z conditions.
In order to do this, my Z conditions do not need an access sequence assigned, right?

I want to copy music from my iTunes library to a usb device for playing in radio with a usb input?

MacBook Pro (13-inch, Mid 2012) Processor 2.9 GHz Intel Core i7 Memory 8 GB 1600 MHz DDR3, running OS X Yosemite Version 10.10.2 I would like to copy music from my iTunes library to a usb device (Transcend 8GB) for playing in my Kenwood KDC - 258U. I am having trouble with the radio recognizing music on the Transcend usb. Suggestions?

Thank you for your reply. I finally figured out that I needed to use the disk utility and erase using the MS-DOS (FAT) option and making sure there were no other partitions. Then I simply used finder to tag music in my iTunes library and drag them to my USB drive. Most of my music is MP3 although my Kenwood will read several formats.

Freight condition type Vs. Tax Condition Types

HI,
Can anyone tell me why Freight condition types Post to accruals during MIGO (GR posting) and Tax conditions types don't? Can I provide me a solution to allow Tax condition types to post to accruals during MIGO just like the freight.
Thanks.
Rickey.

Hi James,
This freight condition type assigned to freight Vendor in creation of PO.During Creation of PO ,select Condition type and go to details and assign your freight Vendor.
If helpful then reward.
Regards,
Biju K

Header condition types and item condition type

Hello Gurus,
this is a simple question. does the header condition types are totally same as item condition types ?
thanks very much!

hi,
header:
If this condition is marked as a header condition, it is possible to enter the condition type in the header condition screen. Checks for changing the condition manually are unaffected by this.
the header conditions calculate the header value
item : conditions of this type are allowed to be entered in the document items. The condition is then only valid for the particular item in which it is entered.
item condition calculate at item level
(freight condition)for eg = HD00 is a header condition .here if you have 10 materials and this cond type calculates the freight charges for all the 10 items.
KF00 is aitem condition.here system caliculates the freight charges only for that particular items.
Edited by: MANI ROOPA SD/MM on Apr 24, 2008 2:32 PM

Update the price from the po condition types to so condition types

hi,
i need update the actual price from the Purchase order invoice price to the SO pricing .is there any Badi or EXit available to do that?
its very urgent.
thanks in advance
regards,
hpp

Hello,
I try to find userexit or BADi for you with out luck. But you can do in reverse way.
what u can do is Update Purchase Order from Sales Order during sales order creation.
user exit is EXIT_SAPFV45E_001
*******Poorna*******

Condition types from Central Contract not copied into Purchase Order

Hi,
When creating a central contract from SRM to ECC, all the condition types are copied well.
But when creating a shopping cart from SRM or a PO in ECC referencing the created central contract, the condtion types are not displayed in the conditions tab. (Only Condtion type PB00 is displayed.).
What can I do to assure, that all the condition types from the contract are displayed in the PO.
Do I have to do some customizing, or is there a SAP Notes to resolve this.
Regards,
Alexander

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Copying the sales price data into Condition type

Dear SD Gurus,
Iam in a typical situation. my client is into Electrical Installation and services, so based on the tender documents, they quote the project.
they are doing costing (ie arriving at a supply rate) in quotation. To arrive at a supply rate, they are entering the cost price of the material ie (PR00) in the quotation and adding the profit (for eg : ZPRF condition type) for it. now my problem is i have to add these two condition types into one condition type to arrive at a selling price. how can i achieve this.
And also while creating the sales order with reference to quotation, these two condition types (ie cost price(PR00) and profit (ZPRF) should not get displayed in the sales order.
Is there any solution for this method.
eagerly waiting for your replies.
Thanking you all in advance
rgds

Hi SD
First of all for project quotation the best practice documentation is available in SAP Discrete Manufacturing ,please go through it . that will help.
Secondly for getting costs in quotation level pricing u can use either of 2 conditions EK02 or VPRS that will give cost .
Add Profit condition to it .
U can use different pricing procedure for quotation and sales order and in copy controls give routine to redetermine manually.
Else if u r using the same pricing procedure ,take help of Abap developer for changing table controls in program.
Check whether u can use Transaction SHD0.
Hope this helps
Regards
Mandar

Itunes is continuously copying files from my iphone

My itunes seems to continuously be stuck copying files from my iphone. it's been going on for over an hour now. Please help.

i tried every way possible, please see this attached screenshots, i think something is wrong with itunes installation. please help

Copying partners from parent to follow up opportunity

Hi
How do we copy partners from partners tab in parent opportunity to extension or follow up opportunity.
Thanks in advance

Hi Vidushi,
U can achieve this by using Partner Access sequence for copy Partners from Parent to followup opportunity,
Create Access sequence for partner use COM_PARTNER_A Preceding Document as a source and assign u r Partner Function in PartFunct in Source
Hope I'll help u.
Regards,
Dipesh.

Condition Types : Calculation Type Change from A (percentage) to B (fixed )

Dear All,
We created a condition type (Calculation Type : A (percentage) ) and assigned access sequence and maintained in pricing procedure but later decided to change the calculation type to B (Fixed Amount) on this condition type.
I am wondering, what impact it will have ?? Can I simple change the calculation type on this condition type or should I take care of any thing else ??
Let me know, What things I have to take care of. Thanking you.
Anu.

Hi Anu,
No need of worry if it is independent condition type, means other conditions are not depending on it OR it is not depending on others.
Also check the condition records if they have any impact.
Else not a big issue, simply go ahead.

Condition types not getting displayed

i have uploaded a smartform & copied the standard program(/SMB40/FM06P) of it into my system.the condition type texts & their amounts are getting displayed for import purchase order(conditions are getting picked from me22n--->conditions) but for domestic invoice im unable to display condition type texts & their amounts.(these are picked from me22n-->invoice---->taxes).
in program lines this code exists.
<FS> like EKPO.
<KO> like KOMV.
input parameters output parameters
ZXEKKO G_KSCHL
L_NETWR G_VTEXT
<KO> G_KWERT
G_VTEXT G_FRAKWERT
G_FRAKWERT G_TAX
G_TOTAL
<FS>
G_TAX
L_KWERT
CLEAR: g_vtext,g_kwert,l_kwert.
CHECK NOT <ko>-kwert = <fs>-netwr.
Get Condition Type Text from table T685T and the value
SELECT SINGLE vtext INTO g_vtext FROM t685t
WHERE spras = sy-langu
AND kschl = <ko>-kschl.
IF sy-subrc = 0.
MOVE <ko>-kwert TO g_kwert.
ENDIF.
Check document currency
IF NOT l_netwr IS INITIAL.
WRITE g_kwert TO l_kwert CURRENCY zxekko-waers.
ENDIF.
*Determine if the discount is based on %
IF g_vtext CS '%' OR
g_vtext CS 'percentage' OR
<ko>-kschl = 'SKTO'.
<ko>-kbetr = <ko>-kbetr / 10.
MOVE '%' TO <ko>-waers.
ENDIF.
Determine Tax
IF g_vtext CS 'tax'.
ADD <ko>-kwert TO g_tax.
CLEAR g_kwert.
ENDIF.
Determine Freight Charges
IF g_vtext CS 'Freight'.
ADD: <ko>-kwert TO g_frakwert.
CLEAR g_kwert.
ENDIF.
i feel the data is coming from above code only.please suggest where i have to make changes so that it picks data from ME22N->INVOICE--->TAXES which has conditions for domestic purchase order.please help.

Hi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
Reward points for useful Answers
Regards
Anji

Condition Types and Records

Hello,
I wanted to bring few condition types as a mandatory condition types with default values(Rates) in CRM contract transaction.
These condition types are maintained in Group Condition Maintence. When i create a conditon record for these condition types, in Menu-> Masterdata->Prices & Conditions ->maintain conditions, i 'm getting this error ' incorrect Values in interface parameters'.
Can some one help me to resolve this error. Also system should determine these condition types automatically when entering a product in CRM contract transaction.
Regards
Kamalesh

Hi,
The configurations regarding Order Types are done under VOV8, but once you have created/saved an Order Type during VA01 then you can't change it.
If you want to change Standatd Order to Rush Order then you need to have the Shipping Condition as "As soon as possible" with "Immediate delivery" marker as 'X' which will create the delivery as soon as Order os saved. Since these settings results from configuration in VOV8 and I don't thnk that it can be changed mid-stream.
Regards
SD

Automatic determination of Condition type value

Hi Friends,
I have one requirement here as described below.
In pricing procdure, I have defined 3 condition types for 3 types of taxes i.e. GST, HST and PST as per client requirement. The value of each condition type is fixed i.e. GST=5% of Gross, HST=7% of Gross, and PST=11% gross. These condition types are not applicable always in the PO. My requirement is when user selects any condition type, then system should calculate the condition type amount and value automatically.
Ex. Suppose the purchase price of a material is 100 USD. In the PO, if user selects GST condition type, then 5% should be determined automaticall in the condition type amount and condition type should be calculated accordingly i.e. 5 USD. One important thing is to note that these condition types will be selected by user as per their requirement and the corresponding % of the condition type should be determined automatically.
Please advice.
Thanks & regards
Satya

Hi Satya,
You can achieve this using access sequence.
1. Create one Access Seq or use Existing seq in your system
transaction code OLME
Purchasing --> condition --> Define Price determination proces --> Define Access Seq
2. Transaction M/06 (Condition Type)
Select your condition code (say ZGST) and click onthe detail view.
Assign the Access Seq to this Condtion
In the Manual Entries Field Assign 'C' for manual entry priority.
save the entries.
3. MEK1 - Create Condition Records
Depending upon your access sequence priorties, define the condtion 'ZGST' with its rate applicable.
similarly maintain the other condition code.
After that create Purchase order. In condtion tab, whenever you enter either of these condition system will take the rate from condition records.
Hope it solve ur issue.
Regards,
S Anand

JEXC condition type and dealer excise.

Hi,
I ve maintained the pricing procedure in m/08 with condition type JEXC subtotal 5 and caltype 355.
But still in the PO manual excise not flow into condition type jmop.
i m stuck up.
And how i will handle the dealer excise.
Regards,
Dinesh

hi
>still in the PO manual excise not flow into condition type jmop.
Use Condition Type "JEXC" in MM Pricing Procedure.
You can use manual excise condition "JEXC" in case if your BED Rate is not fixed as 14% and you want to enter BED Value manually.
Once you input value in JEXC then it will replace the value of BED in "Taxes" under "Invoice" Tab. And ECS / 2% ans SECess / 1%
will get calculated on BED Value.
Here use Tax Code of (14% BED + 2% ECS + 1% SEcess + VAT/CAT As applicable), system will calculate BED, ECS & SECess as per the % maintained in Tax Code. Once you enter value in "JEXC" condition, it will replace the value of BED and ECS / 2% ans SECess / 1% will get calculated on BED Value.
For e.g.
As per Tax Code;
Base Value = 10000
BED / 14% = 1400
ECS / 2% = 28
SECess / 1% = 14
After putting value in "JEXC" as 1600 (For e.g.)
Base Value = 10000
BED / 14% = 1600 (Here 1400 will get replaced by 1600 under "Invoice" tab - "Taxes" button)
ECS / 2% = 32
SECess / 1% = 16
I think the above example will make clear the use of condition type "JEXC"
And Condition Type "NAVS" (Non - Deductible Tax) is used in MM Pricing which will bring value of CST from "Taxes" screen to "Conditions" of PO. Check the attributes of NAVS condition type in M/06
>This is Traders pass-on scenario.
E.g.:
Material Price = 80/-
Excise Duty = 14/- (BEDECessSECess)
Margin = 6/-
Total =100/-
VAT @3% = 3/-
Grand Total =103/-
Step 1:
Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
Step 2:
Post MIGO and Capture Excise Part - 1
Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
Step 3;
Post Excise Part 2 in J1IEX
Step 4:
Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
regards
kunal
Edited by: kunal ingale on Dec 11, 2008 2:17 PM

Copy Rate from MM Codition Type to SD Condition Type for SD invoice.

Similar Messages

Maybe you are looking for