Copy regions and track settings?

Is it possible to copy all of the regions, and track settings from one project to another?

Careful, Rohan. You may be seen as criticising Apple in suggesting that the product is less than perfect. You're going to get the whole discussion board taken down
Pete

Similar Messages

  • Error 7 occurred at Copy in ABAPI Dist New VI Library.vi​- ABAPI Dist Chk for Destinatio​ns.vi- ABA​PI Copy Files and Apply Settings.v​i- EBEP_In​voke_Build​_Engine.vi​- EBUIP_Bu​ild_Invoke​.vi- EBUIP​_Build_Inv​oke.vi.Pro​xyCaller

    When I try to build executables in LabView 8.01 I get message:
    Error 7 occurred at Copy in ABAPI Dist New VI Library.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Bu​ild_Invoke.vi->EBUIP_Build_Invoke.vi.ProxyCaller
    Best Regards

    I got the same error as I tried to build my application, the reason was the string I set for the 'Build specification name' property of my build.
    I changed from '3DC - Dlog Data Compacter ' to '3DC' and it worked afterwards..quite strange behaviour..

  • Regional and Language Settings for Window and BEX Style

    Hi All,
    When I change the Regional and Language Settings for Windows, Standards and Formats value to English (USA) the standard Style for BEX is active. For instance, input-ready cell is bordered with blue. But when I switch to Turkish this style is not active.
    Additionally, I have to change Style for each Workbook one by one. How can we adopt a style to every workbook.
    Regards,

    Lars,
    This is a setting on the 'Defaults' tab in the User Profile. This can be set when a new user is set-up in SU01, or it can be changed by each user according to personal preference in SU3. I'm sure there is a system table where these settings are stored that could probably be edited for all users, if that is desired, but I don't know which table that would be off the top of my head.
    Hope this helps...
    Bob

  • Need quick TIP: remove "Copy access and configuration settings" from added package

    I added a modified package in APPVMAN with the option "Copy access and configuration settings".
    Package is unpublished. But shows AD groups as a current package because I used the option "Copy access and configuration settings"
    QUESTION:
    How to Remove (and then add) the option "Copy access and configuration settings" from added package.
    Cannot find it.
    Thanks.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

    sorry for the panic :)
    before publishing an updated package to existing groups of initial package I hit the option
    "Copy access and configuration settings".
    But first I wanted to test it for TEST group. Didn't think that AD settings will be applied (do it first time).
    Just to confirm:
    1. I will remove current groups from updated(unpublished package)
    2. Will add Test group and test the package.
    3  In case it is OK I can then add removed(needed) groups.
    I want to be sure that after removing and adding needed groups all other settings will be intact.
    Thanks.
    --- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

  • Copy regions and settings (plugins, mixing/volume/pan, etc) to new project

    Greetings,
    I am a brand new logic user and I am scoring my first film. I have two problems, one of which is addressed in the subject heading, and the other I will address now.
    I didn’t realize until today that my synchronization settings were set to 25fps and the movie I am scoring is set to 23.98. This was causing huge problems when I would send the editor a cue, and he could not sync it up. I have read many posts, and I know that once I change my fps to 24, then it should be able to sync up just fine with the 23.98fps. However, because I was running my first few cues at the wrong fps, I now have to start these cues all over at 24fps. I was on apple care support via phone, and the kind person told me to set up a new project as “music for video (ntsc).” He then told me to copy the regions from my old cue and drag them into the new arrange window. I have done this, and here comes the questions:
    1. After dragging the regions from the old file (where I was running at 25fps) to the current project (which is now set to 24fps), I could only copy the music- my volume, pan, and reverb plug-ins did not copy. How can I copy everything over so I don’t have to manually adjust my mixer and reverb settings? If you know the answer, please guide me through it...I am really new to Logic!
    2. Now that I have copied the music to current project (24fps), is there a metronome conversion so I can change the old speed of running at 25 fps to 24 fps or should everything sync up automatically? My metronome is set to 104.2000 in the old cue.
    I would appreciate any help I can get. Thank you.
    Best,
    Adam
    MacBook Pro   Mac OS X (10.4.10)   Owned since May 2007

    Hi Adam,
    Since I don't work in film, I can't answer any of the SMPTE questions, but regarding question #1...
    Go to the audio configuration window of the original cue. Under the Audio Configuration windows edit menu, select "copy".
    Then open the new cue (the one set at 24fps), go to it's audio configuration window, and under the edit menu, select "paste".
    This should copy all plug-ins. volumes and pans. Only do this is all your audio instruments between the songs are the same, which I will assume they are, because the audio configurations "paste" function will replace everything in the current song. But based on your description, this is what you want to do.

  • MultiTrack: How to copy mute and effects settings and shift them forward an exact amount

    I have mute and effects settings I need to shift forward.
    Let's deal with mute on and off automations settings first: I recorded mute automation for instruments on multiple tracks. I need to keep the exact mute on/off settings for the second verse, so I need to shift them forward and start them at the beggining of a specific bar (the vocals have no settings that need shifting).
    I need to copy the mute settings and apply them again at a certainbar of music.  Is this possible?
    I need to keep the original settings at the beginning of the track in place as well, so I can't grab and drag them unless it creates a copy and leaves the original mute settings in place.
    Thank you greatly, I'm working multiple projects trying to get to them all in time.

    Hello Crispin,
    I'm definitely with you on the pain of making multiple tweaks just to make everything look the same. We do not currently have a way of copying properties, but if you have an idea for how you'd think it might work, we'd love to hear from you at:
    http://ideas.adobe.com/ct/s.bix?c=DA4859AD-8934-4F93-983A-4219E2DD9275
    where we are collecting ideas for future directions for Catalyst.
    For now, I would suggest trying to factor similar portions into components as much as possible. For example, perhaps you could create an empty button with all of the effects you want (like the glow, sizing, etc), and then just create a component where that button is above the text and image for a specific button. That way, when you change the appearance of your single button component definition, the appearance will change for all of your buttons. If you got really carried away, you could even create a custom component where each of the states is a different image / text pair, and just set the state of that component for each instance on the artboard.
    -Bear

  • Best way to move region and track automation??

    I want to be able to highlight a region (option copy it) and drag it with automation data. Instead of copy automation data one lane at a time to move it. Eg. I have my synth line in a 4 bar loop with 3 different parameters of automation and i want to move that 4 bar loop (copy and paste) to the next 4 bars and so on with all automation in place.
    Cheers!

    If you enable hyperdraw on the region and zoom in enough you can see and edit the info. I often use hyper draw to draw in my automation in the first place. Saves me a step if I don't need to aactually perform the automation live with a controller.

  • Regional and Language Settings problems

    Post Author: DanaRaluca
    CA Forum: General
    Hi everybody,
    I have to display some information written in Romanian. If I have a static (Romanian) text(Text Object), then everything is OK:
    (Here is the text object copied from the Report: dana_test_şŞ_ţŢ)
    The problem appears if the text is saved into a database table. In this second situation, some characters(ş,Ş, ţ and Ţ) are displayed incorrectly.
    (Here is the database field's value copied from the same Report: dana_test_ªº_Þþ)
    If I select the same values from the database (e.g. using SQLTools), then all characters are shown correctly.
    (SQL: SELECT Description FROM TestRo WHERE Article LIKE 'dm_TestRo%';
    Result: dana_test_Şş_Ţţ)
    Can anyone help me with this?
    Thanks in advance,
    DanaRaluca

    Hi Jelena,
    The DG4MSQL doesn't support MSQL 2008 without a patch. Go to My Oracle Support and download and apply patch 7623456 for the platform where you are running the gateway.
    If you still have problems then either update here again or open a SR using MOS.
    Regards,
    Mike

  • Error 1 occurred at ABAPI Dist Copy Non-VI Files.vi - ABAPI Dist Build LLB Image.vi - ABAPI Copy Files and Apply Settings.vi - DBEP_Invoke_Build_Engine.vi - DBUIP_Build_Invoke.vi - DBUIP_Build_Invoke.vi.ProxyCaller

    Error compiling a library, Kernel32.dll
    Attachments:
    error LabVIEW82.jpg ‏30 KB

    Hey elnibjo;
    This error seems to be the result of the application builder not being able to find the rc file I suggest you follow the steps listed in the following KB:
    Error Creating Source Distributions Involving rc Files
    (http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C)
    Alternatively you can change the path information in the CLFN to contain only the DLL name.
    Let me know if this works
    Good luck with your applibation!

  • Automation data copied to another track?

    I like the way I automated a track, and want to used that exact "volume" automation on the next track below in my arrange menu. Is there a way to copy/paste kind of process here to recreate this on another track?

    Prior to Logic 7, Logic included an Automation Folder. This was basically an arrange page, that had all the automation in your song viewed as if they were audio or MIDI regions. You could easily option/drag automation from one track to another this way.
    There is a way to it in version 7... read about it here:
    http://community.sonikmatter.com/forums/lofiversion/index.php/t21249.html
    I have my automation folder available as a screenset.
    Once set up, this is probably the quickest way to achieve what you're wanting. However, I have also used the method mentioned above, where you drag the region, and Logic asks if you want to copy it (as long as you have "Ask" selected in your Track Automation Preferences).
    Then just delete the copied region, and tell Logic not to delete the automation data.
    Do look into the automation folder though. It allows you to move and copy automation data, just like you do audio and MIDI regions.

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    nope all my songs are copied and organized into the iTunes library.

  • I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

    I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

    How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?

    After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?
    How exactly are you doing this?
    When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file.  Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
    You should see this prompt, when you are joining the regions:

  • Synchronize settings and copy and paste settings not working LR 4.1

    Recently upgraded to LR 4.1.
    The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working.
    Rebooted, nothing new added
    AMD Phenom II X6 1100T 3.60gh
    16 GB ram
    64 bit

    I am also seeing issues in 4.1 with Synchronize settings. I'll giove an example:
    Select all images, change the white balance in most selected image, Click "Sync..." have only the "white balance" check box checked, click Synchronize biutton. All images in that folder appear to have synched, but looking more closely, some of the images did not get the white balance setting applied - this is really random also. Had the same issue trying to sync exposure across all images in a folder - 150ish images.
    Never seen this in any version of LR prior to 4.1 - I have had them all since 1.2.
    I am running Windows 7 x64 8GB on i7 920.
    Hopefully Adobe are investigating this issue.
    Paul A

  • Turning off copy and paste settings

    If I previously copy and paste settings in lightroom 5 from one photo to the next as I scroll through my photos it will continue to copy and paste the settings without being prompted. How do I turn this off?

    Hi Carla,
    Can you do Help > Check for Updates and install the 5.2 update?
    I think this should be fixed in the 5.2 update. Would be curious to hear your report!
    More info here: http://blogs.adobe.com/lightroomjournal/2013/06/keeping-lightroom-up-to-date.html#checkfor update
    Regards,
    Pete

Maybe you are looking for