Copy Regions

For some reason I can't copy or cut a region. When I select it the copy or cut doesn't work. I'm trying to pull the region over a little but when I do it places it in the wrong place and splices the track before it so I figured it would be easier to cut and paste but that doesn't work either. I would just copy each individual track and pull it over but I am assuming the pans and volume changes will only pull with the track if you do it by region. Any suggestions?

I think a region is what you name at the top of the tracks to distinguish between chorus, verse, etc? Correct? That is what I can't copy, cut or paste. I can select a bunch of tracks and copy and move or whatever but not the region. Does that make sense? I figured out my other problem. I had a blank spot at the beginning of the region so when I moved it, it was moving that too, and screwing me up. If I am using the term region wrong what should I be calling it?

Similar Messages

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

No luck copying regions

Hi,
Ive tried option click to copy regions & all it does is drag the region. any help?
Ive managed to do it via the local region menu but would like to be able to do it either way.
cheers
Rob

Hmm, I had overlooked that there was a small error log created. It says
sieve: info: started log at Apr 06 04:05:53.
main_script: line 8: error: require command: unknown Sieve capability 'imapflags'.
main_script: line 8: error: require command: unknown Sieve capability 'notify'.
main_script: error: validation failed.
Line 8:
require ["fileinto","envelope","reject","vacation","imapflags","relational","comparator -i;ascii-numeric","notify","body"];
I removed those and tested and it works (at least with one simple test)

Copy region to page and now page wont display

I copied a region from one page to another page .... now the page I copied the region to wont display ...... get error "page cannot be found ...." the pages that wont display has 2 regions on it ..... anytime I set the copied region to display the page will not render .... if I set only the original region on the page to display it works fine .... but anytime I try to display the copied region, I get the problem .... can anybody tell me why this may be happening ????
thank you for your help

Scott:
I have enclosed some lines from the access and error logs that I think identify the issue ..... the 2 lines on either side of the asterisks (*****) below show the call to app=300 on the one hand and the error on the other .... is there any way from the error id info to determine which page item is causing the problem ???
thank you,
Dave .....
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:07 -0500] "GET /apex/crmprd/f?p=300:15:787230600865394 HTTP/1.1" 200 7398
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:08 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=11792032210424598&p_fname=resdev_logo.jpg HTTP/1.1" 200 39458
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:10 -0500] "POST /apex/crmprd/wwv_flow.accept HTTP/1.1" 302 5
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:11 -0500] "GET /apex/crmprd/f?p=106:1:41570779015332::NO::: HTTP/1.1" 200 8261
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:12 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Starwood_CMYK.jpg HTTP/1.1" 200 20470
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:12 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Brand_Horiz_logo.JPG HTTP/1.1" 200 18895
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:12 -0500] "GET /apex/crmprd/f?p=300:21:787230600865394::NO HTTP/1.1" 200 27397
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:13 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=11792032210424598&p_fname=resdev_logo.jpg HTTP/1.1" 200 39458
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:17 -0500] "POST /apex/crmprd/wwv_flow.accept HTTP/1.1" 302 173
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:18 -0500] "POST /apex/crmprd/wwv_flow.accept HTTP/1.1" 302 174
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:18 -0500] "GET /apex/crmprd/f?p=106:1:41570779015332::::: HTTP/1.1" 200 8244
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:19 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Starwood_CMYK.jpg HTTP/1.1" 200 20470
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:19 -0500] "GET /apex/crmprd/wwv_flow_file_mgr.get_file?p_security_group_id=718803075501684&p_fname=Brand_Horiz_logo.JPG HTTP/1.1" 200 18895
10.29.135.130 - apex_public_user [03/Mar/2008:12:24:22 -0500] "GET /apex/crmprd/f?p=300:1:787230600865394:NEW:NO:1:: HTTP/1.1" 404 299
[Mon Mar 03 12:24:20 2008] [error] [client 10.29.135.130] [ecid: 1204565058:10.29.0.41:4396:4532:311,0] mod_plsql: /apex/crmprd/f HTTP-404 ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "FLOWS_020200.WWV_FLOW", line 334
ORA-06512: at "FLOWS_020200.WWV_FLOW", line 356
ORA-06512: at "FLOWS_020200.WWV_FLOW_FORMS", line 495
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "FLOWS_020200.F", line 276
ORA-06512: at line 10

Weird copying region behaviour

I wonder if anybody else is familiar with this behaviour...
Normaly you copy a region by using the ALT key and dragging... this creates a new region with the postfix .1 which is independend of the original region.
When you add the SHIFT key (used (by me) to copy the region at exactly the same position on another track) it creates a copy, but it DOESN"T add the postfix. If you edit the length of this (copied) region it will also alter the length of the original region... If in the meantime you changed the position of the 'new' region, you're not aware that you're also editing the original...
Very bad 'feature' in my opinion. I should think the use of the SHIFt key should only affect the dragging behaviour. Or it should say so in the new region that it isn't a copy but the same region... It ****** up many a song for me in the past until I finally tested today what was causing this...
G4 800 Quicksilver, 768 Mb Ram Mac OS X (10.4.7) Emagic Audiowerk 8, LP 7.2.1

maybe...
I remember in 'the old days' (I'm not sure if it's the same key combination) you could make ghost copies... Yes, they were (are?) usefull, but they used to look very different... I remember something like --> added to the name and an italic look to them... This made it very clear that you were dealing with the original... Now I realy have to look carefully that I'm not ******* up anything somewhere else in the song...
I would say that aligning the new region the way you want it and changing the way it's copied are two different things and should have two different key combinations -or have their workings be added to the name / look of the new region.
Again, now I know what exactly the problem is, but it took me a while to find out why my songs / edits got so ******...
G4 800 Quicksilver, 768 Mb Ram Mac OS X (10.4.7) Emagic Audiowerk 8, LP 7.2.1

Copying region from a pdf document

In previous versions of Acrobat Professional (v.6 and before) it was possible to copy a region from a document either as an image or as a text (if avilable) depending on the choice of the tool. I didn't find this possibility in Acrobat 8 Standard, is it still available in any of the current Pro versions?

Many thanks, Lori!
It works and this feature is available in Acrobat 8 Standard. Great help to me and my collegues. Apparently v.8 has some OCR features built-in and can recognise text area using object tool. Hovewer it makes a mess with images and the snapshot tool really saves a day here.

Easy way to copy regions from 1 song to another?

Hi,
So - if I open up 2 songs at the same time on my PowerBook G4 laptop, and want to copy one region from 1 song to the other - and have the region paste EXACTLY where it was on the other song - how do I do that easily?
So far - every time I click on one song, and then the other - ESX24 instruments for the songs take tons of time to RELOAD, every time I click back and forth from either song. Also, this is video/film score - so to paste exactly from one song to another - I don't know exactly how to do this.
Any help? Thanks!

It was a late night - so a confusing post makes sense... let me try again:
I am using all MIDI regions - and only using the stock set of 'instruments' that ship with Logic 7.1 on the ESX 24.
I have 2 versions of Cue 6. The director came over and likes certain things from version 1 and other things from version 2.
So, I decided last night to take the first version and color all the regions green. Saved that. Then I did as iSchwartz said to do above - quit Logic... then booted it up again with 'controll' held down. Then opened up my new green version 1 and version 2. I then proceeded to copy each track in vers. 2, one at a time - and 'paste at original location' on my new song - or version 1. The SPL was not in any particular spot - as I ussumed from iSchwartz's post above that the command "paste at original location" does exactly that on a chosen track selected.
I don't know how I can select all at once - in vers. 2 to move to vers. 1 - and then edit from there and create a new version. Moment to moment the director likes one thing from vers. 1 and another from vers. 2.
I decided to SMPTE lock everything before copying also... and tempo is the same in both song files.
Hope this is clearer... thanks!

Option dragging to copy regions

I'm finding it really annoying that when I want to option drag a region to copy it, the dialog box that tells it's current location doesn't show up until I start to move the region. It would be helpful to know that before I start moving.

This sounds like you have might have turned on one of the "accessibility' features of OS X..
or...
Did you install something else just prior to this problem occuring? It could well be the cause of the issue if you did so.....

How to copy region, without copying region based automation.

Say I wanted to copy a region to another track, for instance the track below. If the region that was going to be copied had region based automation, say modualtion or pan region based automation. Is there a way to copy the region, but not the region automation on it?
Cheers

if the automation is MIDI data within the region, then no, you can't copy without the data. It is very easy to delete the info after moving it. Just select, for example, 1 instance of cc#1,Then "select similar" from the edit window, then delete. Repete as necesary for other controller types.

Copy regions and track settings?

Is it possible to copy all of the regions, and track settings from one project to another?

Careful, Rohan. You may be seen as criticising Apple in suggesting that the product is less than perfect. You're going to get the whole discussion board taken down
Pete

Copy regions and settings (plugins, mixing/volume/pan, etc) to new project

Greetings,
I am a brand new logic user and I am scoring my first film. I have two problems, one of which is addressed in the subject heading, and the other I will address now.
I didn’t realize until today that my synchronization settings were set to 25fps and the movie I am scoring is set to 23.98. This was causing huge problems when I would send the editor a cue, and he could not sync it up. I have read many posts, and I know that once I change my fps to 24, then it should be able to sync up just fine with the 23.98fps. However, because I was running my first few cues at the wrong fps, I now have to start these cues all over at 24fps. I was on apple care support via phone, and the kind person told me to set up a new project as “music for video (ntsc).” He then told me to copy the regions from my old cue and drag them into the new arrange window. I have done this, and here comes the questions:
1. After dragging the regions from the old file (where I was running at 25fps) to the current project (which is now set to 24fps), I could only copy the music- my volume, pan, and reverb plug-ins did not copy. How can I copy everything over so I don’t have to manually adjust my mixer and reverb settings? If you know the answer, please guide me through it...I am really new to Logic!
2. Now that I have copied the music to current project (24fps), is there a metronome conversion so I can change the old speed of running at 25 fps to 24 fps or should everything sync up automatically? My metronome is set to 104.2000 in the old cue.
I would appreciate any help I can get. Thank you.
Best,
Adam
MacBook Pro Mac OS X (10.4.10) Owned since May 2007

Hi Adam,
Since I don't work in film, I can't answer any of the SMPTE questions, but regarding question #1...
Go to the audio configuration window of the original cue. Under the Audio Configuration windows edit menu, select "copy".
Then open the new cue (the one set at 24fps), go to it's audio configuration window, and under the edit menu, select "paste".
This should copy all plug-ins. volumes and pans. Only do this is all your audio instruments between the songs are the same, which I will assume they are, because the audio configurations "paste" function will replace everything in the current song. But based on your description, this is what you want to do.

How to copy a region in APEX 4.1

Is there a way to copy regions between pages in ver 4.1?

Hi,
Right Click the region and select copy then give the page no .
Brgds
Max

Manipulating Copied Audio Regions

Here's what I am unsuccessfully trying to do...
I want to be able to cut and/or copy several regions of audio that is on track one and paste those regions anywhere I want into track two but in a way that it doesn't effect track one's original audio file.
I can successfully split track one into slices and copy some of these slices into track two. But if I try to move or change the length of these copies it also changes the regions of the audio on track one! I know there has to be a simple (or another) way to do this but I can't figure it out. What's worse is I am out of town on the road and I didn't bring my manuals with me. I can't find the answer in the help manual either so I thought I'd ask for help here.
Thanks in advance,
Greg
FWIW, I personally am loving Logic 8 and since coming from Logic 3 through 5 (PC) I can say also that I really like the re-designed interface.

Bee Jay wrote:
Note that you don't have to convert regions to new audio files unless you want to do independent destructive processing to them. Depending on your workflow/requirements, mostly copying regions without creating new audio will cover 90 per cent of your needs...
Yea, good point. I just assumed "destructive editing" when I initially read the post. But option/drag will work just fine simply for resizing a copy of a region, or using a part of a copied region else where in the song, without affecting the original region, even though it's referencing the same audio file.

Copy of regions change the notes

Ok, I`m new to Logic. Just started using it a month ago.
Everything has worked out well until now.
I started working on a new song yesterday. As usual i have some parts (midi regions in instrument tracks) that are played several times. I just copy them with rightclickAltdragging. Now the regions change when I copy them like that. The new copy will have most of the same notes but some notes change pitch. What is going on?

WOW!! I had the same problem and viola, the global transposition track is FULL of changes. Whats odd is that I never use the global transposition track, only transpositions in the region parameter box.
This is a guess, but this problem seemed to occur when I selected all regions and normalized all transpositions (as I liked them and wanted it to become permanent). Could this be a bug? I'm going to look into it further, but WOW, what odd behavior. Thank you iSchwartz for pointing this out!! I thought I was going insane! "This isnt what I wrote, is it...."
BTW, these problems only occur when option-copying regions. Duplicating regions did not change transposition. Weird.

Bug report - Copy page with IR raises ORA-3113

Apex 3.1.2.00.02 on Oracle 9.2.0.8
When I copy a page with an IR using the Copy Page wizard (from page X to Y in the same app), I get the following error in the Apache log
I don't change a single thing in the Copy Page Wizard, just accept all the defaults and click Finish and that's when wwv_flow.accept crashes.
[Wed Aug 26 10:21:56 2009] [error] [client xx.xx.xx.xx] [ecid: 1251296511:xx.xx.xx.xx:7628:0:4981,0] mod_plsql: /pls/public/wwv_flow.accept HTTP-404 ORA-03113: end-of-file on communication channel
[Wed Aug 26 10:21:56 2009] [alert] [client xx.xx.xx.xx] [ecid: 1251296511:xx.xx.xx.xx:7628:0:4981,0] mod_plsql: Unable to reset state for mode 0: Err 3114 url=>/pls/public/wwv_flow.acceptThe trace file in bdump dir shows this
*** 2009-08-26 10:21:51.331
*** SESSION ID:(49.33134) 2009-08-26 10:21:51.329
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x1, PC: [0x101003cb8, 0000000101003CB8]
*** 2009-08-26 10:21:51.331
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [0000000101003CB8] [SIGSEGV] [Address not mapped to object] [0x000000001] [] []
Current SQL statement for this session:
INSERT INTO WWV_FLOW_WORKSHEETS ( ID, FLOW_ID, PAGE_ID, REGION_ID, NAME, FOLDER_ID, ALIAS, REPORT_ID_ITEM, MAX_ROW_COUNT, MAX_ROW_COUNT_MESSAGE, NO_DATA_FOUND_MESSAGE, MAX_ROWS_PER_PAGE, SEARCH_BUTTON_LABEL, PAGE_ITEMS_TO_SUBMIT, SORT_ASC_IMAGE, SORT_ASC_IMAGE_ATTR, SORT_DESC_IMAGE, SORT_DESC_IMAGE_ATTR, SQL_QUERY, BASE_TABLE_OR_VIEW, BASE_PK1, BASE_PK2, BASE_PK3, SQL_HINT, STATUS, ALLOW_REPORT_SAVING, ALLOW_REPORT_CATEGORIES, SHOW_NULLS_AS, PAGINATION_TYPE, PAGINATION_DISPLAY_POSITION, BUTTON_TEMPLATE, SHOW_FINDER_DROP_DOWN, SHOW_DISPLAY_ROW_COUNT, SHOW_SEARCH_BAR, SHOW_SEARCH_TEXTBOX, SHOW_ACTIONS_MENU, ACTIONS_MENU_ICON, FINDER_ICON, REPORT_LIST_MODE, SHOW_DETAIL_LINK, SHOW_SELECT_COLUMNS, SHOW_FILTER, SHOW_SORT, SHOW_CONTROL_BREAK, SHOW_HIGHLIGHT, SHOW_COMPUTATION, SHOW_AGGREGATE, SHOW_CHART, SHOW_CALENDAR, SHOW_FLASHBACK, SHOW_RESET, SHOW_DOWNLOAD, DOWNLOAD_FORMATS, DOWNLOAD_FILENAME, CSV_OUTPUT_SEPARATOR, CSV_OUTPUT_ENCLOSED_BY, DETAIL_LINK, DETAIL_LINK_TEXT, DETAIL_LINK_ATTR, DETAIL_LINK_CHECKSUM_TYPE, DETAIL_LINK_CONDITION_TYPE, DETAIL_LINK_COND, DETAIL_LINK_COND2, DETAIL_LINK_AUTH_SCHEME, ALLOW_EXCLUDE_NULL_VALUES, ALLOW_HIDE_EXTRA_COLUMNS, MAX_QUERY_COST, MAX_FLASHBACK, WORKSHEET_FLAGS, DESCRIPTION, OWNER ) VALUES ( :B71 , :B70 , :B69 , :B68 , :B67 , :B66 , :B65 , :B64 , :B63 , :B62 , :B61 , :B60 , :B59 , :B58 , :B57 , :B56 , :B55 , :B54 , :B53 , :B52 , :B51 , :B50 , :B49 , :B48 , :B47 , :B46 , :B45 , :B44 , :B43 , :B42 , :B41 , :B40 , :B39 , :B38 , :B37 , :B36 , :B35 , :B34 , :B33 , :B32 , :B31 , :B30 , :B29 , :B28 , :B27 , :B26 , :B25 , :B24 , :B23 , :B22 , :B21 , :B20 , :B19 , :B18 , :B17 , :B16 , :B15 , :B14 , :B13 , :B12 , :B11 , :B10 , :B9 , :B8 , :B7 , :B6 , :B5 , :B4 , :B3 , :B2 , :B1 ) RETURNING SQL_QUERY INTO :B0
----- PL/SQL Call Stack -----
object      line object
handle    number name
3f64fc090     10065 package body FLOWS_030100.WWV_FLOW_API
4006611a8      1980 package body FLOWS_030100.WWV_FLOW_COPY_PAGE
4006611a8      3869 package body FLOWS_030100.WWV_FLOW_COPY_PAGE
401886520        52 anonymous block
3ecf09680      1120 package body SYS.DBMS_SYS_SQL
3fb977730       285 package body SYS.WWV_DBMS_SQL
3fd2f1448      4278 package body FLOWS_030100.WWV_FLOW
3fd2f1448     12853 package body FLOWS_030100.WWV_FLOW
3eaee2850        10 anonymous blockIt seems to be a problem with just this particular page. I am able to copy other pages with IRs just fine.
As a workaround, I created a Blank page and used the Copy Region wizard to copy the IR region over to the blank page. Same error. Looks like this particular IR's metadata is somehow corrupted?
Help? Thanks

I can try. I rarely use the Builder UI to import applications because it is extremely painfu land usually never works but with apex.oracle.com I don't have a choice.
First, I used the Import function to install my app. After a long time, I got an error
But the file was already uploaded so I went to the Export/Import repository and clicked on the Install link. I chose the auto assign a new app id and clicked Install and after a long time I got this error.
So I used the browser's Back button to go back a couple of screens and clicked the Install button and got this error
Just on a whim, I went to the Builder home page and voilà the application was already there! Hopefully, the import function will be improved soon. But I digress.
Anyway, I am not able to reproduce this. The Copy Page functions works fine on apex.oracle.com. Looks like it is indeed a 9.2 bug. I will see if dropping and re-importing the app helps.
Thanks

Copy Regions

Similar Messages

Maybe you are looking for