Copy Roadmap

Hello ALL,
I'm trying to create a new roadmap copying an old one, but whe the system ask about Package I choose $TMP and the following message appears:
"System setting does not allow changes to be made to object SHI3 AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"
I have no idea what it means... in fact the Solution MAnager System should not be transported... that's why I chosse $TMP
Could you help me saying whats is wrong or how I can make a copy of an existing roadmap ?
thanks in advance.
Enrique

Hi
Are you doing this in ur production system
It seems ur system is locked for changes...consult ur BASIS and check SCC4 and SE03 settings.
Hope it helps to solve ur problem
Regards
Prakhar

Similar Messages

  • Impact upgrade copied Roadmap.

    Hello,
    We are investigating in using our own Roadmap. It will be a copy of the ASAP Implementation Roadmap and will have new structure nodes with related project documentation.
    At the moment we are using the ASAP Implementation Roadmap V3.0 Sep 2005 and SOLMAN 3.2 service package 12. Soon we will be upgrading our Roadmap and in the near future we will be upgrading to Solution Manager 4.0.
    Can anybody tell me :
    1. If you upgrade our Roadmap what will happen with the Roadmap which we have created? Will the new structure nodes be gone? and what will happen with the documentation? Do you need to recreate the Roadmap again?
    2. The same questions in case of upgrading Solution Manager?
    Hope to hear from you?
    regards,
    Ralph

    Hi
    All The Delta queues should be cleared before Upgrade.
    Some of the Extractors will have impact, not sure depends.
    You must prepare a Check list before Upgrade with the Data Upload time and After upgrade Upload time.
    Hope it helps

  • How to Copy Roadmap using RMDEF, and NOT generate a transport

    We want to lock down our production environment from any configuration, but still be able to maintain our Roadmap, via RMDEF/RMAUTH, without generating any transports. Is this possible? Or must I always generate and push the transports from our development/configuration client to production?

    You need to read the error messages more closely:
    01652, 00000, "unable to extend temp segment by %s in tablespace %s"
    // *Cause:  Failed to allocate an extent for temp segment in tablespace.
    // *Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more
    //         files to the tablespace indicated.
    01653, 00000, "unable to extend table %s.%s by %s in tablespace %s"
    // *Cause:  Failed to allocate an extent for table segment in tablespace.
    // *Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more
    //         files to the tablespace indicated.When you do CREATE TABLE t AS SELECT ... Oracle initially creates the table as a temporary segment in the tablespace where the table will reside.
    The ORA-01652 indicates that there is not enough space in the table's tablespace (the table you are trying to create) to grow the table to the size required. It has nothing to do with your temporary tablespace.
    The ORA-01653 means that there is not enough space in the tablespace for an existing table to add another extent.
    In both cases, you need to add more space (either by adding new datafiles, or by extending the existing datafiles) to the table's tablespace (again, not the temp tablespace).
    Just a question. If updating the tables once a month takes too long, why not increase the frequency of updating the tables? If you are on 9i, you may also want to take a look at the mege command.
    TTFN
    John

  • Solution Manager - Issue when Roadmap is copied

    Dear All,
    I am copying a standard roadmap and then assigning it to my project. When I execute the RMMAIN transaction instead of getting the graphical representation screen with the various buttons for each item, control goes to the next screen where the roadmap structure is available in the left with the detail tabs in the right.
    And I get the below message
    <b>000000000000Enhancement /KWCUST/ (Release 610) does not exist.</b> 
    Could you please help me resolving this issue.

    Dear Smijoe,
       Please check the following SAP notes & apply.
    987320, 987727
    Regards
    senthil

  • Problem with roadmap's creation : Please help

    Hi,
    I copied the global template roadmap in order to create my own roadmap. The thing is that I deleted the files and created my own nodes and subnodes in the structure. Was it the right way to do ? I mean I can not see the entry screen when I am not in the transaction "RMAUTH", even if I change the user setting and undo the cross "view via entry screen". And furthermore, the entry screen is not complete and it seems impossible to add something to the work package...By the way it appears that the structure is clearly not recognised by the system....Could someone help me please ?
    PS : The new roadmap has been assigned in "administrator system"

    Hello,
    One more question: what do you mean with you see the beginning of the roadmap in the entry screen ?
    The nodes which are direct children of the top node are used as header in the entry screen.
    I mean, if you have the following roadmap structure
    Rodmap Test
    1 . Node one
       1.1 SubNode one
       1.2 SubNode two
    2. Node two
       2.1 SubNode three
       2.2 SubNode four
    When you start the entry screen edition, you will see the 2 headers with name "Node one" and "Node two".
    Then you will have to add Work area, you can do this by using the push button "Work Area Management", you have to select (or create) a work area to be used (for example "Work Packages"). When the needed work area is selected, you have to select the "Copy" button. And then confirm the dialog.
    When clicking on the pen, you are only allowed to select the subnodes of the node which is  written in the header. In my example, if you have clicked on a pen of the first column (which has header "Node one"), you will be only allowed to select the nodes "SubNode one" and "SubNode two".
    The nodes which are located below "Node two" will not be selectable (checkbox is greyed out).
    Regards,

  • Homogeneous System Copy to Upgrade Propouse

    Hi all,
    We're pretending to do a Homogeneous System Copy from a SAP ECC 5.0 that runs on Windows_X64 Server with DB2 8.1 . The target DB release is DB2 9.5 ( Windows_X64 Server).
    We've read from IBM Help Page that DB2 8.2 it can be upgraded directlly to 9.x.
    What is the right roadmap?
    OPTION 1:
    Backup offline of old DB2 8.1 enviroment.
    - Run sapinst install centrall instance
    - Run sapinst to install Database instance with 9.5 RDBMS full installation.
    - Restore backup from 8.1 ?
    or it will be:
    OPTION 2:
    Backup offline of old DB2 8.1 enviroment.
    - Run sapinst install centrall instance
    - Run sapinst to install Database instance with  DB2/UDB RDBMS V8 FP18 Windows_X64 Server - Full Install .
    - Restore backup from 8.1
    - Upgrade to 9.5 ?
    Thanks a lot !

    Hi,
    are you really using DB2 V8.1 ( DB2 V8 with fixpack level < 7 ) ?
    not sure if OPTION 1 works since your DB2 V8 version is so old. Is it an option to upgrade your fixpack level on your source database first and apply OPTION 1 afterwards.
    Regards
                     Frank

  • Roadmap structure not visible - Urgent help pls...

    Hello All,
    I tried creating a custom roadmap with my own folder structure. I created it as all subfolders.
    Once I am done with creation, I tried with RMMAIN transaction to view the same. But unfortunately I am not able to see the structure created by me.
    I am sure that I am missing something with the 'Entry Screen' button of the RMAUTH transaction. But not able to figure out what it is. When I press the 'Entry Screeen' button, I am able to see all the folders I created for my Roadmap structure.
    But the same is not visible in RMMAIN. Can anybody help me figuring out what I am missing and where I am missing?
    Any input in this regard will be greatly appreciated. Thanks a lot in advance.
    best regds,
    Alagammai.

    Without having to go into a lot of details on this - there are ample details on how to use these objects together to create a custom road-map.  There can be a number of things wrong that are not being satisfied by the work you have done so far.  You can access the guide in the http://service.sap.com/solutionmanager -> media library -> documentation -> 4.0 SP12 File.  Goto the section on Creating RoadMaps - it can explain all the nuances better than I can.  Personally I think that there is an issue with the flavor and how you have assigned your components such that when you created your project - there was nothing to display but go through the guide anyhow and see what might be the issue.
    Remeber that you can always copy a RoadMap and then remove a bunch of stuff that you don't like - this is the typical method of doing business that I have seen that works pretty well.  Making these from scratch can be a bit of a pain.

  • Error during the PREP_INPUT/KX_CPYORG in the EXTRACTION roadmap step

    Dear Gurus,
    We are on SUSELinux 10 SP2
    Oracle 10.4 and
    I am in the process of applying EhP4 on top of my ECC 6.0 SR3 server and i m in the Extraction roadmap step and at a phase PREP_INPUT/KX_CPYORG which gives me the following error
    Severe error(s) occured in phase PREP_INPUT/KX_CPYORG! on my SAPEhPGUi screen and no log gives a clear explaination of this error, i have checked the log KX_CPYORG.LOG and it is as below
    ======================================================================================================
    2 ETQ399 Reading list file '/usr/sap/KDV/SYS/exe/run/dbatoolsora.lst'
    3 ETQ399 Copying file 'dbatoolsora.lst'.
    3 ETQ399 Copying file 'brarchive'.
    3 ETQ399 Copying file 'brbackup'.
    3 ETQ399 Copying file 'brconnect'.
    3 ETQ399 Copying file 'brrecover'.
    3 ETQ399 Copying file 'brrestore'.
    3 ETQ399 Copying file 'brspace'.
    3 ETQ399 Copying file 'brtools'.
    3 ETQ399 Copying file 'initSID.sap'.
    3 ETQ399 Copying file 'sapconn_role.sql'.
    3 ETQ399 Copying file 'sapdba_role.sql'.
    3 ETQ399 Copying file 'libsbt.so'.
    1 ETQ399 Copied 784 files.
    1 ETQ399 Failed to copy 1 files.
    But doesnt say which file..
    ======================================================================================================
    Apart from that i have also checked the log file SAPehpichk.log, which is as below
    CURRENTPHASE PREP_INPUT/KX_CPYORG
    ...started at 20091004010834
    Using phase log file 'KX_CPYORG.LOG'.
    Kernel is replicated from /usr/sap/KDV/SYS/exe/run.
    ...begin dialogue at 20091004010846
    ======================================================================================================
    i have also checked the files and the size of the /usr/sap/KDV/SYS/exe and /ehp4/EhPInstaller/EHPI/abap/exe folders and they look alike and no size difference among them.
    Can anyone please help me come out of this situation.
    I have re-run the Phase (repeated) many a times with no luck.
    Awaiting any inputs on the same,
    Million thanks in advance,
    Baso

    Dear All,
    The issue is resolved and i did the following
    1) Cancelled the Ehp4 installation
    2) Deleted EHPI directory
    3) Downloaded latest EhPI (which is released on 1 Oct)
    4) Restarted the EhP4 installation
    5) Changed the icmbnd file permissions in the source directory to 777 and owner to SIDadm
    6) Copied it manually with the same permissions into the target exe directory (ehp4/EHPI/abap/exe)
    7) After the phase reset the file permissions back to original in the source directory (/usr/sap/SID/SYS/exe/run)
    Only one good suggestion is download the latest EhP installer
    Hope this helps
    Thanks to all
    Regards
    Hunky

  • Guide to Upgrade Roadmap

    Hi All,
            I am new to RoadMaps in Solution Manager.Can anyone ,please provide links or guide for configuring Upgrade Roadmap.
             FYI, we have already created project in Solar_Project_Admin tcode.
    Regards
    Imaan

    Hi Imaan,
    Creating an upgrade roadmap is similar to creating an implementation roadmap.
    1. In the transaction Roadmap Repository (RMDEF), you create a new Roadmap or copy an existing one.
    2. Create the Roadmap structure in the transaction Roadmap Authoring Environment (RMAUTH):
      a.Choose the Change Structure pushbutton in the left-hand pane, and create new structure elements    with the right-hand mouse key.
      b.You can assign the following to a structure element, in the top right-hand pane:
          ->Structure element description
          ->Attributes (flavors, roles, subject areas)
      c. Assign accelerators to a structure element, in the bottom right-hand pane.
      d.Create an initial view for the Roadmap, with the Initial View pushbutton.
    3. To use a Roadmap, including its documents and accelerators, in another system:
       a.Save the Roadmap in a transport request, i.e. not locally.
       b.Transport this transport request into the other Solution Manager system.
    If you need more explanation, pls let me know.
    Thanks,
    Waseem.

  • Roadmap node (element) type

    Hi,
    I am beginner at the Solution Manager and currently try to understand how we can use the Roadmap. We can create, copy,  use sap pre-defined roadmap in our projects.
    I create the structure of my own Roadmap. When I create subnodes of roadmap in transaction RMAUTH - Authoring Environment Roadmap, I have to choose the node type.
    What do these node types mean? I understand that Milestone identify the project phases but:
    1) What do other define?
    2) What purpose do these types pursue?
    3) When we selected the Roadmap for our project in transaction SOLAR_PROJECT_ADMIN - Project Administration, why only milestones from Roadmap are reflected in the Milestone Tab? Where are other types like service packages, methods and outputs operated?
    Thanks for dealing with my thread and hopefully for replying )
    Olya

    Hello Olya,
    'M' stands for Method and 'O' stands of Output.
    Method and Output are used in the view 'filtering'. You can select the view in the menu 'Settings' -> 'View' -> Method View or Output View. It is a kind if additional filtering.
    On node with type Service package, you can see in the transaction RMMAIN a new tab Service Session which will contains some service information about the service you have selected when creating a node of type Service Package
    For your question about the Milestone tab, what would you expect to appear in this tab ? The milestone are retrieved from the roadmaps which were set into the project scope. And in this tab you will be able to select a start/end/actual date.
    There are some basis information at the following link
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/ae/64c33af662c514e10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/ae/64c33af662c514e10000000a114084/frameset.htm</a>
    please check the path:
    SAP Solution Manager -> Projects -> Roadmap
    Best regards,
    Thierry

  • RoadMap creation Error "Selected Enhancement/Release is not valid"

    Hi,
    I am trying to create a RoadMap using T-Code RMDEF.
    While creating the RoadMap I am getting Error
    <b>"Selected Enhancement/Release is not valid"
    "Message no. AI_ROADMAP_EN050"</b>
    My role has the following profiles
    SAP_ALL
    SAP_NEW
    Also, I can copy a RoadMap, but can’t create a new one.
    If you have a solution for this, please let me know.
    Regards,
    Vikas

    Hello  Vikas,
    I had the same problem and was solved following the instructions of note 924068
    Plase note thad the customizing path described in the note is not current (as of solman sps 23) just use the search functionality with term KW context to find the IMG activity
    or the correct path is:
    SPRO -> SAp solution manager implementation guide -> Sap solution manager -> cross scenario settings -> document management -> knowledge warehouse options -> Define kw context
    regards

  • Unable to capture IdcService on certain webdav actions like copy-paste

    We wrote a simple checkin filter long back for the Dynamix Prefix functionality.
    We have written an If Clause to restrict running this for any services other than CHECKIN related ones, by checking the value of IDCService parameter
    There is a scenario where users copy files present in one folder in UCM and paste it under another folder (thus creating a new content item altogether), using Webfolders.
    In 10g, even this case produced correct Prefix as service name. We used to have "validateStandard" filter used for this activity.
    In 11g, due to some complications and changed filters, we started using "preComputeDocName" filter.
    In 11g PS3, We are unable to capture IDCService here and hence unable to assign Dynamic Prefix. Any suggestions?
    Currently we only fire the code if IdcService contains "CHECKIN_" or "WEBDAV_PUT" or "COLLECTION_COPY"
    Regards,
    Prateek

    Office X is problematic in SL and it's a bit obsolete since it's almost ten years old. Student version of office is relatively inexpensive. BTW, I can't solve your issues, since I moved to Office '04 six years ago.

  • HP AiO Remote app will not recognize scan and copy function of HP Envy 120

    Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

    Replied on: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-AiO-Remote-will-n...
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP AiO Remote will not recognize scan and copy function of HP Envy 120 printer

    Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these functions were available in the app only for printers which provide these features. But HP Envy 120 has both scanner and copier. And last time it worked. Some idea what could have happened here? Thanks. UJ

    Hi UJKarl, welcome to the HP Forums. You should be able to scan from the HP AIO Remote App on your Envy 120 printer. You probably just need to power cycle the printer, iPad and router to regain proper function.
    Turn off your printer with the power button. Power down the iPad by holding the sleep button down until you get the option to 'slide to power off'. Then disconnect the power cord to your router and count to about 10, and then plug it back in. Once the router comes back online, turn the printer on. When the printer comes back online (blue wi-fi light stops blinking), then power the iPad back up. Try again, and it should work.
    Let me know how it turns out.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Aio remote update copy

    Been using the aio app for sometime now with no problems, very happy!
    But.....the latest upgrade seems no longer to have a simple "photocopy" function, used it a lot in the past...simple!
    Now it seems I have to do scan or photograph and then fiddle with parameters like paper size and getting the right configuration etc. not nearly as simple as before....document on table close lid and then "copy" and that was it!
    Anyone else seen this, am I missing something? Hopefully I'll get my "copy" button back in the next version......??

    Hello John_france,
    Welcome to the HP Support Forums!
    I see that the current is version is 4.3.1, if this is the one you have, then it appears that yes, that feature has been removed. Why, I do not know and with this knowledge I do not plan on updating my All-in-One Remote app on my iPad. I'll keep and open eye for updates and let you know what I find out. Cheers!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Maybe you are looking for