Copy SAP Solution Manager
We would like to copy or install SAP Solution Manager 7.0.
We investigate 2 options:
1) Copy from existing SAP Solution Manager (export/import with SAPINST)
2) new installation
Question:
Which approach is better (1 or 2)?
Is a system copy of SAP Solution Manager different to other system copy of SAP systems?
Which points should be regarded with system copy approach?
Hi,
I suggest you go for copy system option as it will copy all the config settings also
Only in case if IP etc is changed the RFC needs be regenerated again otherwise basic settings will be there.
This saves a lot of time
Regards
Prakhar
Similar Messages
-
How to copy SAP Solution Manager?
Hi experts,
I'm searching a manual, which explains a system copy for Solution Manager 7.0 EhP 1. I can't find such a document in the SAP Marketplace. Can anybody help me?
Thanks and best regards
MaxHello Max,
Please see the following URLs/Notes which will explain on system copy for SOLMAN.
http://www.service.sap.com/instguides
-> SAP Components -> SAP Solution Manager --> Select the relevant release and you will find installtion, upgrade
and configuration guides.
Please refer to the below link for more infromation.
http://service.sap.com/solutionmanager
Please also check if below notes:
659509 ORACLE: Special installation and system copy (point 3:Required documentation)
492051: Moving solutions to a new Solution Manager
Thanks,
Mark -
Error in installation of Sap Solution Manager - AIX / Oracle
<b>Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:</b>
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.
<b>
The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.</b>
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
<b>IMPORT_MONITOR.JAVA shows this message:</b>
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
<b>And the directory is OK</b>
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
<b>Please, anybody have any idea?
Thanks for help,
Carlos Nogueira</b>Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance. -
R3load -testconnect failed while installing SAP Solution manager
Hi
I'm trying to install sap solution manager, it gets to "abap import" and then gives an error. I think there is a problem with database connection.
Here is what I get in the log
INFO 2007-03-22 17:03:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.2.xml'.
INFO 2007-03-22 17:03:01
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/inifile.3.xml'.
INFO 2007-03-22 17:03:06
Execute step Component W2K_ServicePack_Check|ind|ind|ind|indPreprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2007-03-22 17:03:18
Copied file 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/DB6/CENTRAL/AS/keydb.2.xml'.
INFO 2007-03-22 17:03:18
Execute step testDatabaseConnection of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
INFO 2007-03-22 17:03:32
Switched to user: lvtadm.
INFO 2007-03-22 17:03:32
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\R3load.exe.log.
INFO 2007-03-22 17:03:32
Switched to user: lvtadm.
INFO 2007-03-22 17:03:32
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS.
INFO 2007-03-22 17:03:32
Output of C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2007-03-22 17:03:33
Execution of the command "C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect" finished with return code 2. Output: sapparam: sapargv( argc, argv) has not been called.sapparam(1c): No Profile used.sapparam: SAPSYSTEMNAME neither in Profile nor in CommandlineC:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20070322170332
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'saplvt' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2007-03-22 17:03:33
CJS-30023 Process call 'C:\usr\sap\LVT\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2007-03-22 17:03:33
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Any assistance will be rewarded.
Thanks in advanceHi Louis
>>>snip<<<
For details see log file(s) R3load.exe.log.
>>>unsnip<<<
Or logon as <sid>adm and issue
R3trans -x
Then take a look at trans.log
Hth+Best regards
dirk -
Kernel Update from 7.00 to 7.01 - SAP Solution Manager EHP1
Can anyone give me some information about update sap kernel?
How must I proceed?
Thanks!Login to service market place www.service.sap.com>downloads>supporpackages and patches>My company applicationsselect sap solution manager>SAP SOLUTION MANAGER 7.0 EHP 1>Entry by component>solution mangaer ABAP stack>select sap kernel 7.01 64 bit unicode-->select widows
server on X64bit>select database indendent>just scroll download you can see list of pathces select SAPEXE_23 which is the lates one and selet the check bot to add to download manager now select database dependant patch based on your database you have installed(Ex oracle or MS SQL)
select the same patch SAPEXEDB_23 and download the 2 patches through download manager
uncar the 2 patches throught sapcar command
sapcar -xvf <and give the patchnameSAPEXE......SAR>
sapcar -xvf <and give the patchnameSAPEXEDB......SAR>
Now take the backup of existing kernel
Drive:/usr/sap/SID/SYS/exe/uc
once the backup of kernel is finshed stops SAP and releated services
start>cmd>services.msc-->stop the service sap<SID_instance number> and saposcol service
now copy all the uncar newfiles to original run directory and replace all.If you face
problem like some service is still running then stop all the oracle services also and
try again.
Once all the files are copied then start the services and SAP
Let me know if needed more information
Regards
Uday -
Maintenance Optimizer in SAP Solution Manager
what is Maintenance Optimizer in SAP Solution Manager and what are its benefits
Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
Select Header Data
Click Installed Product Versions
In the product box add whatever you require for this system
Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
User: <Username>
Pass: <Pass>
Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
Select NEW
Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
Select Solution Landscape Maintenance
Select System Groups and Logical Components Tab
Open Solution Landscapes
Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply -
Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0
Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
KaleelDear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul -
Questions on "FAQ - SAP Solution Manager for VARs"
Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
RichardHello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich -
Install SAP Solution Manager with DEV instance in the same server (MCOD)
Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind RegardsHi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C. -
Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"
I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PMHi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram -
Error in Import Java Dump phase while installing SAP solution Manager 7.1
Hi,
While installing SAP solution manager 7.1 I am getting the below error during the phase "Import Java Dump".
An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step : Execution of JLoad tool 'C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\install\sharedlib\launcher.jar" -showversion -Xmx1024m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/install/sharedlib;D:/usr/sap/SPT/SYS/exe/uc/NTAMD64/mssjdbc/sqljdbc.jar" -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir "D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP" -job "C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML" -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/SOLMAN71/SYSTEM/MSS/CENTRAL/AS/jload.java.log' for more information.
JLOAD.JAVA log details below
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Jload R 7.12 V 0 A 0
Jload -sec SPT,jdbc/pool/SPT,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.properties,
smn/sapmnt/SPT/SYS/global/security/data/SecStore.key -dataDir D:/SAP SOLMAN/Java Components/51040039\DATA_UNITS\SOLMAN_JAVA_EXPORT_JDMP -job C:\Program Files\sapinst_instdir\SOLMAN71\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Connecting to database
Couldn't connect to DB
com.sap.inst.common.exception.DBConnectionException: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:157)
at com.sap.inst.jload.Jload.main(Jload.java:222)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.loginWithoutFailover(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
at com.sap.inst.common.db.DBConnection.connectViaSecureStore(DBConnection.java:111)
at com.sap.inst.common.db.DBConnection.connect(DBConnection.java:151)
... 6 more
An error occured during execution. Please consult SAP note 942766 for first steps on troubleshooting the problem.
I have gone thru with the notes and it didn't help me much.
I have used J2SDK 1.4.2_17 nad JCE_Policy-1.4.2 files.
Please let me know where IO went wrong.
Thanks in advance.
SaiHi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala -
How to Unlock the Object in SAP Solution Manager
Hi all,
Iam trying to Upload the TS into Solution manager, but the Project Documentation TAB is locked by another User.So i am unable to get ADD button enable
I dont have access to SM12 or SE03. How to Unlock this
RegardsThis is not the right forum to ask your doubt. Post this in Solution Manager forum
SAP Solution Manager
Regards,
Prateek -
Document Management in SAP Solution Manager
Hi All,
I would like to know If you are using SAP Solution Manager as a central tool for overall Documentation Management?
Could you please share some information about your solution?
Many thanks.
Regards,
RidouanHi Ridouan,
For this i suggest two options:
*Use Template Projects to manage templates:
http://wiki.sdn.sap.com/wiki/display/SM/Template+Projects
*Use Solutions to re-use some structures:
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/87/38037ccd314c9aac4f026f1ba34558/frameset.htm
further about document management: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/46/87f790498b5cede10000000a114a6b/frameset.htm
Kind regards
Fabricius -
EWA for Business Objects (XI 3.1) within SAP Solution Manager
Hello!
We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
Question
Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?Hello,
The short answer is no. You can verify this in SAP Note 1507629 - Preparing a BOE system for Service Sessions in Sol. Manager.
"...1.) Managed System Setup
Perform the Managed System Setup for SAP BusinessObjects Enterprise as
described in the "End-to-End Root Cause Analysis System Landscape Setup
Guide". This guide can be found in the SAP Service Market Place:
-> http://service.sap.com/diagnostics
-> Navigate to the "Media Library"
-> Open the document "SAP Solution Manager Landscape Setup Guide"
Please ensure that you perform all steps mentioned in the guide which
are relevant for your product and version. Please read also SAP note
1357901, which is also referred to in the above mentioned setup guide."
So this is a requirement. There are also pdf documetns attached to this note that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
Regards,
Paul -
FAQ - SAP Solution Manager for VARs
You can find further technical questions around configuration & functionalities in a comprehensive
FAQ to SAP Solution Manager for VARs.
This FAQ covers questions and answers around:
> SAP Solution Manager, enterprise edition
> SAP Solution Manager VAR setup: configuration of Service Desk
> Work Center Service Desk: functions & configuration
> Work Center System Monitoring: setup of SAP EarlyWatch Alert
You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
Please notice: The FAQ will be updated from time to time.
Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
Edited by: Susanne Schlehf on May 18, 2009 12:56 PMHello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich
Maybe you are looking for
-
ORA-12203 while calling a form from external procedure
Hi I am using oracle 10g 10.2.0.3.0 database with forms 6i. We have created a database procedure , which makes a call to external procedure(C program). Now this external procedure creates a process and process is creating a call to form. We have chec
-
Opening an application in Workspace results in blank screen
Hello expert, When we try opening an application in Workspace we are obtaining a blank screen. With other applications this problem doesn't happens. Do you have any idea how to resolve this issue? We already try restarting services and also reconfigu
-
I am not able to access my Ipod using the email address because it has been deactivated.
-
Problem with 'append' syntax in ECC 6.0
i am upgrading a old report i got a unicode error actually the report has the followig structure tables: arc_buffer. DATA: BEGIN OF class_package OCCURS 0. INCLUDE STRUCTURE arch_packa. DATA: END OF class_package. now the report has fo
-
How to use keynote with window 8?
how to use keynote from iPad to window8?