Copy shopping cart item (originally from catalog), able to change price

We create a shopping cart item by selecting a catalog item from CCM 2.0. The price is not changeable, as we would expect.
We then copy that item in the cart to create item 2. However, the price in item 2 is now changeable, even though it was copied from catalog item 1.
We have implemented OSS note 693175 which gives us the ability to change the price of a catalog zero priced item, which is what we want.
But we do not want to be able to amend the price of catalog items that have been copied to new items.
Can we prevent a catalog item that has been copied from having its price changed?
Thanks
Neil

Hi Neil,
I think any item that is copied from another line item can be changeable irrespective of whether the first item was a catalog item or not.
You are just copying a line item and is not directly taken from catalog.
So the system allows you to change the item details.
If you want to order the same item at same price then what is the need for copying it as second line item.
Hope this makes you clear.
Rgds,
Teja

Similar Messages

Restriction while copying shopping cart

Hi,
My requirement is as follows-
Users should not be able to copy shopping carts created from external requisitions(a custom field SCTYPEE = X or Y signifies that it is a external requisition)
How to achieve this... shall i use BBP_DOC_SAVE_BADI/BBP_DOC_CHECK_BADI?
thnks
Richa

Hi,
See solution in foll threadS:
Re: Restrict Copying of Carts to Particular Vendors
Re: Prevent copy SC items derived from external catalogs
BR,
Disha.

BBP_CREATE_PO_BACK & shopping cart items

Hi,
How do I identify in BADI BBP_CREATE_PO_BACK
which purchase order item relates to which
shopping cart item ?
eg SC has 3 lines :
1. widget -> purch req
2. red thingy -> PO item 1
3. blue thingy -> PO item 2
In the above-mentioned BADI how can I tell that PO
item 1 came from shopping cart line 2 ?
( BADI logic needs to go back to SC item.... )
Message was edited by: Ian Huxley

Hello Ian,
what do you want to do ?
- send sc item reference to R/3 PO item or
- identify originating SC item to complete some PO data before sending data to R/3
During SC transfer, the Backend ref is stored at SC item level in BBP_PDBEI (business object BUS2012 & backend obj ID). Backend PO item # is not yet stored (done later by CLEAN_REQREQ_UP), but in fact PO & SC items are sorted in the same order.
Ex:
Order a SC with 5 items, at the beginning of the transfer, SRM groups SC items and stores PO ID for each SC item:
SC item 1 --> PO 5000000001
SC item 2 --> PO 5000000002
SC item 3 --> PO 5000000001
SC item 4 --> PO 5000000002
SC item 5 --> PO 5000000001
This will create 2 PO in R/3:
PO 5000000001
PO item 1 --> from SC item 1
PO item 2 --> from SC item 3
PO item 3 --> from SC item 5
PO 5000000002
PO item 1 --> from SC item 2
PO item 2 --> from SC item 4
Those PO item / SC item links are updated by CLEAN_REQREQ_UP.
So in the BADI, if you look at SC items linked to the current PO ID (in table BBP_PDBEI), you should find only the relevant SC items (ex 3 items for PO 5000000001).
Get rid of deleted items, sort them by internal number, and you have identified which PO item relates to which SC item !!!
I think you can use function BBP_PD_OBJREL_READ_VIA_REF to retrieve SC items linked to a PO.
Hope this is clear enough and will help you.
Rgds
Christophe
PS: please reward points for helpfull answers

Shopping Cart Item deletable after approval

Hello all,
I have an issue regarding Shopping Carts: When a Shopping Cart is approved, gives a Purchase Order which is sent to Vendor, Requester can still delete Item of Shopping Cart, which has effect to delete Item in Purchase Order. I opened a message for SAP but they tell me this is the standard behavior which is for me a non sense!
I would like to know if you already met the fact that Shopping Cart Item being deletable after approval and if you corrected it, how?
Thanks,
Patrick
PS: I am working on SRM 5.0

Hi,
Yes this is a standard behaviour.
The business case is a user who made a mistake and do not have access to PO due to lack of authorization.
He should be able to delete his SC which trigger a delete status at PO item level.
Then , if system is well configured, an update output is triggered to communicate to the vendor taht the line item has been deleted.
If you do not want this behaviour, just modify the roel authorization in PFCG transaction.
Kind regards,
Yann

SRM7 shopping cart item clipboard management - how to delete/remove

In SRM 7.0, after adding a shopping cart item, in "Item Overview" you can use button "Copy" to "Copy selected item to clipboard". If there is an item stored in clipboard, the button "Paste" is enabled and user can "Paste clipboard contents".
My question is how to delete the clipboard content in "Item Overview"? Unlike clipboard in "Account Assignment", there is a button for user to delete clipboard content.

Hi K,
I think this question was auto marked as Answered by SCN. There is no answer at the moment.
May be you can open a new thread for the same question.
Regards,
Donald

Reg : Shopping cart item

Hi All,
We can have many items in shopping cart.Once the shopping cart has been approved, order can be generated .
Here there are two questions for me..
1.Let us suppose there are two items in shopping cart.Now can i create two different purchase orders for those items.
2.If i have only one item.then can i generate multiple Purchase orders for that same one item in the shopping cart.
Thanks,
Ravee..

Hi Pierre and David,
Thanks for your replies
Actually I found that both the scenarios are posssible.
You people said that first one is possible.Second scenario is like when i have an item in SC with quantity 100.I can create two PO's with qty 50 each.
Now I have a doubt here....
I am creating Purchase order in SRM system.PO will be created for the approved Shopping cart.
But while creating/changing PO if the purchaser try to change the value of the line items greater than the value approved in the shopping cart i should give him an error message.
For that I am using a BADI : BBP_DOC_CHECK_BADI (This will get triggered when PO is created or changed).
1. For a method in this BADI, I am passing IV_DOC_GUID(a global identifier)
2. I am using a FM BBP_PD_PO_GETDETAIL and passing the above global identifier to a field in FM to get line items of the PO into an internal table. (Here i am getting all line items of a PO)
loop at line item internal table. (If i get multiple line items I will loop like this)
3. After that In the PO line items there is a field SRC_GUID. I am passing this to a FM BBP_PD_SC_ITEM_GETDETAIL to get the shopping cart information for that line item.
(Here I am getting all SC information for that particular line item)
endloop.
Till here it is good.But the problem here is
when two PO's are created from one line item on a shopping cart.*
Example :
From above
In step 2 : I will get only one PO by passing unique identifier.
let us suppose PO is 1000000000 and line item is 10(qty : 10). In its item details I will have a field SRC_GUID for every line item
In step 3 : I will pass this SRC_GUID to FM BBP_PD_SC_ITEM_GETDETAIL to get SC details.
Now I will check the details of PO with SC.As two PO's are created from SC.The Net Values of items in SC will be high.
let us suppose SC has item 10 with qty:20.
where Can I find the other PO's created for this Shopping cart. Then Only I can check whether the PO value is greater then SC line item.
Please suggest me.
Thanks,
Ravee....

SRM 7.0 Shopping Cart Item - customizing Delivery Address Tab fields

Hi experts,
I have to make the fields of tab Delivery Address in the Shopping Cart (Item detail) only readable.
In other threads I found similar questions: in SRM 7.0 I have to go in Customizing
SAP Supplier Relationship Management -> SRM Server -> Cross Application Basic Settings -> Extensions and Field Control (Personalization) -> Configure field control
and add fields for which I want properties to be changed.
The problem is that at start of the SC creation the fields are blank again, they became gray only if, for example, I take an address with the match code on NAME field, that populate the other field of the tab. Or if I check the document after I've insert the address Name.
Thank you in advance.
Enrico Righetto

Hello,
Check here how the delivery address determination works:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=230261594
If field is made as read only when address is maintained, the best option would be to maintain a standard address number in ADDR_SHIPT attribute in PPOMA_BBP.
Regards,
Ricardo

Add a new tab with customer fields to shopping cart item

Hello Experts,
I wanted some help in adding a new tab to shopping cart items. I went through some posts and found ways of doing it using some spro settings, but there is no way i can handle the field type in this.
I want a customer field which is a checkbox, how would i add this?
Moreover if i use spro the tab will by default be called as "Table Extensions" , i want to give it a specific name.
In case i am adding a new webdynpro component , how would i go ahead with this? what is the name of the fpm config where i need to add my customer webdynpro component?
So could someone please help me with this requirement.
Regards,
cruiser

Hello,
Please follow below steps,
1. Appending the fields to the structure in Se11 i.e INCL_EEW_PD_ITEM_CST_SC
x = header, item
y = PO,SC
2. SAP SRM->SRM server-> Cross-Application Basic setting ->extension and field controls->create a table extension and supply with data->define customer table extension .( ZAINCL_EEW_PD_ITEM_CST_SC)
3. Set the visibility of table extension thru control table extension and their fields and actions
    use configure visibility of table like item enchancements
Bus. Object Set Type : TICUS
Bus. Object Type         :BUS2121
Transaction Type        :SHC
PDO set exist   :X
4. Configure Control of Fields of Table Extensions
Bus. Object Set Type : TICUS
Structure Field Name : Field name
Bus. Object Type       :BUS2121
Set Level                   : ITEM
Field visible: X
Field Enable: X
5. Configure control action
6. Maintain view /SAPSRM/V_MDFSBC_DEFAULT
Bus. Object Set Type : TICUS
Structure Field Name : Field name
Bus. Object Type       :BUS2121
Set Level                   : ITEM
Field visible: X
Field Enable: X
Regards,
Neelima

SRM4 - Shopping Cart - Item Details - Expand Area title change

Hello gurus
could you point me in the right direction to change the title of the expand area in Shopping Cart - Item Details: - Vendor Text and Internal Note ?
Thank you very much
Imrich

found it on the screen
SAPLBBP_SC_UI_ITS 0120

Add shopping cart item functionality is not working in PO

Hi Experts,
I found that Add shopping cart item functionality is not working in Purchase order.
We are raising the Purchase order in SRM and i am trying to use the Add shopping cart item functionality to add the shopping carts line item in to purchase order.
Once I will click on start search, it will give me a list of Approved shopping cat and when I am trying to add any shopping cart in PO line item, nothing is happening and It is not allowing me to add the shopping cart line items in to this PO and also there is no error message.
Please suggest us how i can fix this issue.
Thanks in advance.

HI,
If the shopping cart's have same vendor and company code, then only we can club the shopping carts
in to single PO.
Please go throught it
http://help.sap.com/saphelp_srm40/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm

How to Add Shopping Cart items to an existing PO

hai friends
how to Add Shopping Cart items to an existing PO
Regards
Emil

Hi,
go to the Manage PurchaseOrder
(BBP_POC) transaction.
Then, I enter the "Item data" tab and I go to add shopping cart item part and click on "Start Search".
I select one item in a shopping cart appearing in the screen and press "Add to Purchase Order" button.
BR,
Disha.
Do reward points for useful answers.

Unable to add Item to Shopping Cart in SRM-MDM Catalog

Hi Guys,
I am using SRM-MDM Catalog 3.0, MDM 7.1 and SRM 7.0. I have done all the configurations in SRM as well as in Portal like External Web Service creation, Assigning Catalog in Organisational Plan, UI Config and OCI mapping.
I am able to see catalog on SRM-MDM web dynpro UI; however I am not able to select any item in the Catalog (the Checkbox is grayed out) and also I am not able to change the Quantity of any Item (by default it is 1). The Action column is also blank for all the items.
In the Catalog, both Select and Quantity Columns are in disabled mode. I am not able to edit their values.
I have tried all options in UI Config but no luck. Request you to please suggest if something needs to be done with the Config or I need to apply some SAP note.
Regards,
Varun

Hi Shiv,
Kindly refer below link and see the images.
http://wiki.sdn.sap.com/wiki/pages/viewpageattachments.action?pageId=189597716
Hope this helps!
Regards,
Viaks

Need to delete PO value for a deleted shopping cart item.

Hi SRM experts
Please help me on below mentioned issue.
I have a shopping cart with one deleted item, That deleted item shows a PO number under table BP_PDBEI field BE_OBJECT_ID in production server.
User want that PO number to be delete or clear from that shopping cart deleted item.
We are not authorize to delete or clear a entry from the SAP standard table itself.
Is there any function module, I can use directly in production server which can delete / clear this PO number from table BP_PDBEI field BE_OBJECT_ID from shopping cart deleted item
Please help urgently.

Hi Sharma,
normally if this PO doesn't have further follow-on documents, should be able to be deleted. Once the PO is deleted, the SC will be updated and in the follow-on document history of the SC you will see an additional remark "follow-on document deleted".
But I guess, this is not what you would like to do.
Without manual database changes you won't be able to delete the connection between the SC and PO.
If you somehow will get authority to the database changes, please don't forget to delete also the relations between PO and SC. You will find it in the tables SRRELROLES and BBP_PDBINREL.
Regards,
Peter

The item price transferred from catalog cannot be changed in SC

Hi Team,
In Shopping cart for catalog item with price as zero(which are selected form catalog ),The Price field is editable so if we change the price from zero to
other value and when we click on order the below shown error is populating.
And also the below mentioned sap notes are implemented for the solution
Please help so that we can change the price form zero to other value. SRM 7.0 Support pack 8
Thanks & Regards,
Padmasai Kantheti

Hi Padmasai,
This is the standard behavior if you have the checkbox "Activate SC Item Price Check From Catalog"
active for your catalog web service definition.
When this checkbox is active system will always check for price change and will not be allowed to change the price from catalog.
Regards
Sam

Need to delete / clear PO value for a deleted shopping cart item.

Hi friends
Please help me on below mentioned issue.
I have a shopping cart with one deleted item, That deleted item shows a PO number under table BP_PDBEI field BE_OBJECT_ID in production server.
User want that PO number to be delete or clear from that shopping cart deleted item.
We are not authorize to delete or clear a entry from the SAP standard table itself.
Is there any function module, I can use directly in production server which can delete / clear this PO number from table BP_PDBEI field BE_OBJECT_ID from shopping cart deleted item
Please help urgently.
Thanks a lot in advance.

Hi
check this FM
ISM_PORDER_DELETE
ISM_PORDERNEW_DELETE
ISM_PORDERRET_DELETE
Regards,
Viquar Iqbal

Copy shopping cart item (originally from catalog), able to change price

Similar Messages

Maybe you are looking for