Copy single table between two servers

Hi... I perform a remote copy (SCC9) yesterday, a few months i did another copy and exclude some tables, in the expert setting, now in my copy, we need a table that was excluded in the last copy (yesterday).
Do you know how to copy that table??
Thanks in advance..

Hi
Check this out
[Link1|http://sapbasis-security.blogspot.com/2008/04/copying-tables-entries-between-two.html]
[Link2|http://books.google.co.in/books?id=ASekwAiAXdMC&pg=PA426&lpg=PA426&dq=howtoCopysingletablebetweentwoserversin+sap&source=bl&ots=BS7d2sSz4C&sig=9QWwA7Mlg_7Q6tj_lS4lcMqZz4k&hl=en&ei=T1xVSuTyK6bU6gPh6oXCDw&sa=X&oi=book_result&ct=result&resnum=1]
Regards
Uday

Similar Messages

How to Break the cluster between Two servers

Hi Experts,
Since Iu2019m new to BOBJ XI R2.I would like to know how to break the cluster between two servers.
Description :
So far we took the copy of QAS Server1 to the new QAS server2 (Through Mirroring Tool ). Now those two servers are cluster together, I can see QAS server1 CMS Name, Cluster Name, cluster member name in QAS Server2 (CMC-> Setting -> Cluster).
Besides in QAS Server1 CMS Name and Cluster name are pointing to the QAS Server1, except Cluster Member (This is still have two members Server1 and Server2).(CMC-> Setting -> Cluster).
In QAS Server1 and QAS Server2 (CMS-> Servers), I can able see both server name under Machine Name tab.
I would like to make those two servers as independent servers. There are two different data source for those two servers. I want to remove the cluster in both servers.
Right now QAS Server1 is running and QAS Server2 is stopped.
If i create/modify a group under new Mapped NT Member Groups in QAS server2 ,it is getting reflecting in QAS server 1.
Could you please tell me the steps to resolve this problem.
BO Version: BO XI R2
Regards,
Sridharan

Hi,
Maybe the external CMS is still 'attached' to your SIA node. Please go to the CCM (Central Configuration Manager) and stop the SIA (Server Intelligent Agent). On one of the tabs you can see if there is an external CMS part of your environment. Delete it and restart the SIA. Retry if you can delete the services now from within your CMS. It may well be that you have to stop both environments and delete each others CMS via the CCM to get it working. If you have not changed any permissions for your Administrator account the security model will not be the one causing this.
Hope this helps...
Martijn van Foeken
Focuzz BI Services
http://www.focuzz.nl
http://nl.linkedin.com/in/martijnvanfoeken

Cannot get Telnet to work between two servers on same subnet

I need to test if communication is open on port 8444 between two servers.
I installed telnet client on a Server 2008 R2 server and telnet server on a Server 2008 SP2 server. I also manually started the Telnet service that was set to disabled on the SP2 server. I disabled the Windows firewall on both servers. They
are both on the same subnet so they don't need to go through any routers and I can ping successfully.
When I try to telnet to the remote server by typing telnet "ip address" 8444, I get an error that says "Could not open connection to host, on port 8444: Connection failed.
I tried other ports like port 80 and got the same error.
What else is needed to get this to work?

VMs have nothing to do with it, as long as there's network communication between the servers.
As I said, there must be a service or application listening on that port for it to respond. For example, try this:
C:\> telnet
When the telnet prompt opens, type in:
open mail.messaging.microsoft.com 25
If it works, you should see this:
220 CH1EHSMHS035.bigfish.com Microsoft ESMTP MAIL Service ready at Thu, 7 Feb 2013 00:57:33 +0000
That means that Microsoft's mail servers are LISTENING on port 25 and it responded. And note, telnetting to port 25 is a non-default telnet port, because port 23 is the default telnet port. When you type in a space and then a port number, you're telling
the telnet client to use that port.
That is the SAME THING if some sort of application or service is listening on port 8444 on that other server you're trying to telnet to. If there is no app or service listening, it will just time out.
And no, installing the TELNET service on that sercver will NOT answer to any port other than 23. The telnet service by default, uses TCP 23, unless you specify otherwise.
So once again, what service or app on that server is supposed to be listening on 8444?
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

Bridge Table between two fact tables

Hello everybody,
From what I have read on the BI Administration tool help and on this forum, bridge tables are used to define many-to-many relations between dimension sand fact tables. Is it possible to have a bridge table defining a many-to-many relation between two fact tables?
Here is my senario:
1. We have a fact table called fact_Orders describing orders for some products.
2. We have a fact table called fact_Sales describing sales og these products.
3. We have a table describing the transformation from order lines to sales lines which is a many-to-many relation, because it is possible to transform an order in more than two steps.
I was thinking of connecting the two fact tables with a bridge table.
If bridge tables are inappropriate for this case, what could be a better model for my senario?
Thanks for your time.

Hi,
Well a conformed dimension is a bridge table between two facts, so not sure why you need anything else. If there is a one to many from D1 to F1 and a one to many from D1 to F2 then effectively there is a many to many join from F1 to F2 through the D1 dimension.
Sounds to me like all you need is an order dimension table, rows in the orders fact table will join to this dimension and so will rows in the sales fact table. You can then do calculations like number of sales per order, total sales revenue per order, # of order items per order etc etc.
Regards,
Matt

How e-mail is routed between two servers

Hi ,
Please anybody tell me how e-mail is routed between two servers , from the software point of view as well as hardware point of view .
And how Java mail API related to that .
Thanks,
Kiz

If you're looking for a simple answer there isn't one. Here's a place to start.
http://community.roxen.com/developers/idocs/rfc/rfc974.html

Reg: How to automate updation of tables between two oracle DB Instances

Hi All,
I have a requirement to auto update the tables between two oracle database instances. What are the possible solutions to handle this kind of situations.
Please help me out in identifying the correct solution.
Thanks in advance :)

The possible solutions are outlined in the distributed database documentation
They are
a) trigger (6.0 and higher)
b) advanced replication. Creates triggers on every table. Requires every table to have a primary key (8.0 and higher)
c) Streams (Uses logminer, has no impact on table. Requires every table to have a primary key, or supplemental logging will be used. (9.0 and higher)
d) Change Data Capture: superset of Streams (9i and higher).
If you don't require realtime updates you don't need c or d. b is difficult to manage. Using a) the source db can potentially have to wait for the target db to complete it's transaction.
Sybrand Bakker
Senior Oracle DBA

Copy tables between two different computer?

Hi experts,
I don't know if is this the correct place to make this question, but I need help with independent tables. Is it possible to copy independent tables to one 6.0 computer to other computer with the same version 6.0?
Thanks in advance for your answers,
Best Regards,
Rebeca

> We want to copy independent tables from one system in 6.0 to another system in 6.0. We have system A (that was in 4.7 and now is in 6.0) with data relative to Spain and another system, system 2, that is also in 6.0 with data from other countries. In system B we have a particular mandant for Spain and the problem is that we want to include all the independent tables information from system A to system B and we don't know how to do that... is there anyway that we can do this?
There is no standard way of putting data of two systems to one system together. It's not just copying tables around (many HR tables are cluster tables and can't be read through SQL without a logic on top) but also speaking of dependent things.
The only supported way of doing such things is booking an SLO service and let SAP assist you in doing it. Only then you can be sure that it works as expected. But don't underestimate the whole thing. Check
http://service.sap.com/slo
--> Consolidate and unite system landscapes
--> Optimization for HCM
SAP has the tools and the knowledge to do such things and you can be sure it works. I would not do it on my own by copying tables (most HR tables are client dependent, you'd have to map client numbers, plants, adapt T512W and all that stuff manually).
Markus

Is their any easy way to replicate DRM application between two servers?

Hi Guys
I have a Test and Dev environment I need to synchronize these two servers. One option is to export all the Properties, Version, etc one by one and then import it to required test or dev environment. This is little time consuming method.
I am looking for something like replicating (Copying) the entire application from DEV to test in one single go. Is their any option available in DRM.
Thanks & Regards
-Ramesh Janarthanan

its as simple as Martin says.
but keep a look at username/password of db user/db (server) name. Its very easy to configure in the drm console.
Good luck.

Add new row in table between two rows - OATableBean

Hi,
I have a requirement where I need to add a new row between two rows. Lets say I have a table with 5 rows. I am envisioning having an icon (table switcher) on the row #1, which when clicked will insert/create a new row between rows #1 and #2 like #1.5, something that can be achieved in core forms. In core forms, when we click the add button, it immediately creates a new row before the current row ( and pushes other rows down). Is that possible with OATableBean. Please let me know if you have any ideas.
Thanks,
Ravi.

Hi,
I used following code to insert the row in the end
public void createNewRow()
XXEGASRLinesVOImpl vo =getXXEGASRLinesVO1();
Row row1 ;
int i;
Row row[] = vo.getAllRowsInRange();
row1 = vo.createRow(); //vo.createRowSet("10");
vo.insertRowAtRangeIndex(row.length,row1);//.insertRow();
row1.setNewRowState(Row.STATUS_INITIALIZED);
Check if it works for you, you have to modify it to meet your requirement.
Regards,
Reetesh Sharma

Trigger in a join table between two database

Hi an Happy new year
I have two database, one is dedicated to security and the second for my multitenancy application
In this two databases one have tables USER, USER_JOIN_USER_ROLE and USER_ROLE
the second, USER (where fields are differents), USER_JOIN_USER_ROLE and USER_ROLE
the two join table must be the same and USER_ROLE are the same in the two databases.
I plan to use a trigger to replicate from the application database to the security one, I already use triggers to Replicate USER and set the differents fields.
I'm new in triggers using.
My user replication trigger seems like that
CREATE TRIGGER [dbo].[USER_REPLICATION]
ON [dbo].[DM_USER]
AFTER INSERT
AS
BEGIN
DECLARE @EmployeeId int = (SELECT FKEmployee FROM inserted)
DECLARE @Login nvarchar(50) = (SELECT LoginUser FROM Inserted)
DECLARE @Password nvarchar(50) = (SELECT PasswordUser FROM Inserted)
DECLARE @Tenant int = (SELECT IdCompany FROM TEST_MULTI.dbo.DM_COMPANY WHERE IsTenant = ''Y'')
DECLARE @CompanyId int = (SELECT ExtIdCompany FROM TEST_MULTI.dbo.DM_COMPANY WHERE IsTenant = ''Y'')
DECLARE @LegalEntityId int = (SELECT FKLegalEntity FROM TEST_MULTI.dbo.DM_EMPLOYEE WHERE IdEmployee = @EmployeeId)
DECLARE @LastName nvarchar(255) = (SELECT LastNameEmployee FROM TEST_MULTI.dbo.DM_EMPLOYEE WHERE IdEmployee = @EmployeeId)
DECLARE @FirstName nvarchar(255) = (SELECT FirstNameEmployee FROM TEST_MULTI.dbo.DM_EMPLOYEE WHERE IdEmployee = @EmployeeId)
DECLARE @EMail nvarchar(255) = (SELECT EMail FROM inserted)
SET NOCOUNT ON;
INSERT INTO DM_SECURITY_MASTER.dbo.DM_USER(LoginUser, PasswordUser, FKCompany, TenantId, LegalEntityId, LastName, FirstName, Email)
VALUES (@Login, @Password, @CompanyId, @Tenant, @LegalEntityId, @LastName, @FirstName, @EMail)
UPDATE [TEST_MULTI].[dbo].[DM_USER] SET ExtIdUser = (SELECT IdUser FROM [DM_SECURITY_MASTER].[dbo].[DM_USER]
WHERE LoginUser = @Login
AND PasswordUser = @Password
AND FKCompany = @CompanyId
AND TenantId = @Tenant
AND LegalEntityId = @LegalEntityId
AND LastName = @LastName
AND FirstName = @FirstName
AND EMail = @EMail)
WHERE IdUser = (SELECT IdUser FROM Inserted)
END
but I cannot figure how to use a trigger to update a collection and not find anything on it, any help welcome
I use Windows Identity Foundation in my code and update or insert can set multiple rows

Hello and thanks for help.
The trigger i give as example already works fine but Fanny Liu is for sure better than mine and I will try it. Users insertions are not multiple, only one user can be inserted at the same time
My question was most on using triggers to update a collection via a Join table between my user and users roles
I wrote it Yesterday for INSERT
USE [TEST_MULTI]
GO
/****** Object: Trigger [dbo].[USER_ROLE_INSERT_REPLICATION] Script Date: 01/03/2014 10:56:36 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:
-- Create date: 2014/02/01
-- Description: Replication INSERT on MASTER DATABASE
-- =============================================
ALTER TRIGGER [dbo].[USER_ROLE_INSERT_REPLICATION]
ON [TEST_MULTI].[dbo].[DM_USER_JOIN_USER_ROLE]
AFTER INSERT
AS
DECLARE InsertCursor CURSOR FOR (SELECT FKUser, FKUserRole FROM inserted)
DECLARE @UserId int, @UserRoleId int
OPEN InsertCursor
FETCH NEXT FROM InsertCursor INTO @UserId, @UserRoleId
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE @UserMasterId int = (SELECT ExtIdUser FROM TEST_MULTI.dbo.DM_USER WHERE IdUser = @UserId)
IF NOT EXISTS(SELECT * FROM DM_SECURITY_MASTER.dbo.DM_USER_JOIN_USER_ROLE WHERE FKUser = @UserMasterId
AND FKUserRole = @UserRoleId)
INSERT INTO DM_SECURITY_MASTER.dbo.DM_USER_JOIN_USER_ROLE (FKUser, FKUserRole) VALUES (@UserMasterId, @UserRoleId)
FETCH NEXT FROM InsertCursor INTO @UserId, @UserRoleId
END
CLOSE InsertCursor;
DEALLOCATE InsertCursor;
And for DELETE
USE [TEST_MULTI]
GO
/****** Object: Trigger [dbo].[USER_ROLE_DELETE_REPLICATION] Script Date: 01/03/2014 10:57:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:
-- Create date: 2014/02/01
-- Description: Replicate DELETE on MASTER DATABASE
-- =============================================
ALTER TRIGGER [dbo].[USER_ROLE_DELETE_REPLICATION]
ON [TEST_MULTI].[dbo].[DM_USER_JOIN_USER_ROLE]
AFTER DELETE
AS
DECLARE DeleteCursor CURSOR FOR (SELECT FKUser, FKUserRole FROM deleted)
DECLARE @UserId int, @UserRoleId int
OPEN DeleteCursor
FETCH NEXT FROM DeleteCursor INTO @UserId, @UserRoleId
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE @UserMasterId int = (SELECT ExtIdUser FROM TEST_MULTI.dbo.DM_USER WHERE IdUser = @UserId)
DELETE FROM DM_SECURITY_MASTER.dbo.DM_USER_JOIN_USER_ROLE WHERE FKUser = @UserMasterId AND FKUserRole = @UserRoleId
FETCH NEXT FROM DeleteCursor INTO @UserId, @UserRoleId
END
CLOSE DeleteCursor;
DEALLOCATE DeleteCursor;
It works fine
Thanks for help, I will mark it as answered

Comparing Table between two dbs DBMS_RECTIFIER_DIFF.DIFFERENCES

We have streams replication between two databases db1 & db2 (table level streams replication).
We would like to compare tables between these databases.
we can use DBMS_RECTIFIER_DIFF.DIFFERENCES to find out differences. However what is value to be passed for REFERENCE_SITE & COMPARISON_SITE parameters?
Is it DBLINK or TNSNAMES entry ?

Its the DBLINK.

Mirrored Storage between two servers

Hello,
Is it possible to create redundant storage using two Windows 2012 r2 servers? I've been looking all over and any HA options always reference having external shared storage presented to the cluster (I assume NAS/SAN). I am also assuming that said
posts expect that whatever tech is being used for shared storage deals with keeping that data fault tolerant (e.g., mirrored SAN) and the Windows cluster need not be aware of that happening in the background.
Due to lack of any storage hardware in my environment I was hoping there was a way to create a redundant file share/system between two Windows 2012 r2 servers at which point I could then create an iSCSI target to present a virtual drive to an application
server cluster. That way if one of the "storage servers" fails it won't take down the application running on the app server. I looked into DFS however since the app locks its files those won't replicate across.
I hope my question wasn't too convoluted.
Thanks for any guidance!

Hi Bkboudreau,
If I am not misunderstand your question, you are finding the method for iSCSI target servers synchronize iSCSI data.
Replication of data between sites is very important in a multi-site cluster, and is accomplished in different ways by different hardware vendors. You can choose the hardware
storage vendor solution when you want to synchronize data between two shared storage.
You cannot use the feature in Windows Server 2008 called Distributed File System Replication (DFS-R) as your data replication method in a multi-site cluster. DFS-R only performs
its data replication after a file is closed. This works well for files such as documents, presentations, or spreadsheets, but it will not work for files that are held open, such as databases or virtual machines. You must choose a replication option other than
DFS-R.
The related KB:
Requirements and Recommendations for a Multi-Site Failover Cluster
http://technet.microsoft.com/zh-cn/library/dd197575(v=ws.10).aspx
The similar thread:
how to sync the data between the two iSCSI target server
http://social.technet.microsoft.com/Forums/windowsserver/en-US/067ba543-369c-4d22-9f00-1f41d7aedc00/how-to-sync-the-data-between-the-two-iscsi-target-server?forum=winserverClustering
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Copy blog entry between two blogs?

Is there a way to move/copy a blog entries or a series of blog entries between two blogs? I have some entries in one blog that I want to move to another blog within iWeb, and I do not want to have to recreate the entries manually in each blog.
Thanks,
Robert

Hello
I would be interested in this as well. It would make it easier to setup a hidden blog draft page and then just copy the finished entry to the "real" blog page when it's done.
I haven't found a way yet - so far, I've just been copying the elements one by one to the real blog page or just composing in email (using the drafts folder there) and then pasting it in the blog and finishing off the formatting at that time.
Alex

Port forwarding between two servers from Same subnet

Hi,
We have a Cisco ASA 5520 Version 8.4(3). There exists a site to site VPN tunnel between us and a client and the client sends us the data to our local host/server 10.x.x.20 on port 52944. So 10.x.x.20 gets data on port 52944. We want to forward this data to a test server 10.x.x.21( same subnet IP) on port 52945. so basically I want to forward traffic from 10.x.x.20:52944 to 10.x.x.21:52945.
Is this possible. I am a new bee to the networking and still learning. Excuse me if this sounds silly.
I know we can add one more ACL in the VPN tunnel and add this test server IP in the ACL. but, then I have to ask the clinet to change their ACL too. I dont want to do this. So I want to wrok around it. Any help or suggestions is much appreciated.
Thanks in advance :)
This is my first ticket in the support community.
cs

VMs have nothing to do with it, as long as there's network communication between the servers.
As I said, there must be a service or application listening on that port for it to respond. For example, try this:
C:\> telnet
When the telnet prompt opens, type in:
open mail.messaging.microsoft.com 25
If it works, you should see this:
220 CH1EHSMHS035.bigfish.com Microsoft ESMTP MAIL Service ready at Thu, 7 Feb 2013 00:57:33 +0000
That means that Microsoft's mail servers are LISTENING on port 25 and it responded. And note, telnetting to port 25 is a non-default telnet port, because port 23 is the default telnet port. When you type in a space and then a port number, you're telling
the telnet client to use that port.
That is the SAME THING if some sort of application or service is listening on port 8444 on that other server you're trying to telnet to. If there is no app or service listening, it will just time out.
And no, installing the TELNET service on that sercver will NOT answer to any port other than 23. The telnet service by default, uses TCP 23, unless you specify otherwise.
So once again, what service or app on that server is supposed to be listening on 8444?
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

Are there benefits to adding crossover cable between two servers for DFS replication and SQL Always On?

I have two identical servers with 4 network interfaces each. The primary usage for two servers is hosting SQL Server instance with Always On high availability and dfs replication. Two network interfaces from each server will be used to connect to main network,
while for the other two (on each) I was thinking about using crossover cable to possibly provide shorter path for two servers to communicate.
Will there be any benefits to doing so, moreover, would teaming two crossover cable help more?
Edit: Below is the link to the article where I got the idea of moving DFS Replication traffic to crossover. I wasn't able to find any info whether same thing is applied to SQL Always On high availability.
http://blogs.technet.com/b/filecab/archive/2006/08/24/449013.aspx

Hi,
According to your description, my understanding is that you want to connect 2 servers by crossed cable(2 NICs).
Just as the blog suggested, directly connect the servers by crossed cable and configure corresponding route entries will improve efficiency.
If both servers have 2 NICs to connect, I recommend you to team the 2 NICs for bandwidth aggregation. NIC teaming is supported by Windows Server 2012/2012 R2, detailed information you may reference:
NIC Teaming Overview
https://technet.microsoft.com/en-us/library/hh831648.aspx
besides, for file servers, SMB Multichannel (a feature included with Windows Server 2012/2012 R2 and part of the SMB 3.0 protocol) will helpful for increasing the network performance and availability. Detailed information reference:
The basics of SMB Multichannel, a feature of Windows Server 2012 and SMB 3.0
http://blogs.technet.com/b/josebda/archive/2012/05/13/the-basics-of-smb-multichannel-a-feature-of-windows-server-2012-and-smb-3-0.aspx
For SQL server, suggestions in SQL Server Best Practices would be helpful for you:
https://technet.microsoft.com/en-us/sqlserver/bb671430.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Copy single table between two servers

Similar Messages

Maybe you are looking for