Copy Source System Parameters from 1 container to another DAC 10
Hi ALL
I want to copy the records in the tab source system parameters from 1 container to another, i only want the source system parameters, anybod have any idea, I was thinking of copying them directly in SQL, was not sure where though, Thanks
Go to your custom container at Source system parameters tab
right click->Reference->Select the container->add required one
If helps pls mark as correct/helpful
BTW: for DAC experts send me an email
Edited by: Srini VEERAVALLI on Dec 19, 2012 4:40 PM
Similar Messages
-
DAC source system parameters not being generated
HI all,
We are implementing BI apps 7962 with Informatica 861 Hot FX11, OBIEE 101341 on Linux5. We have installed and set up the configuration completely. The Informatica services are created and the DAC was configured with the Source System Parameters. When I generated the execution plan parameters, the files are being generated in the SRC files folder. But it seems like the source system parameters I set in the DAC client are not being picked up.
For example I have set the Initial Extract date as 1/1/2008. But when I ran the load and saw the log files it still seems like the Initial Extract date is 1/1/1970. We have set the custom property for Integration Service overrideMpltVarWithMapVar as Yes. Please help me if any one has seen this before.
Thanks
MN
Edited by: MNRK on Apr 5, 2011 12:49 PMHi,
When you have configured all the tasks in DAC, while running the loads DAC will generate the parameter files at runtime.
You need to make sure that parameterfileDW.txt and parameterfileOLTP.txt files are present in DAC Installation Directory\bifoundation\DAC\Informatica\Parameter\Input folder.
If these files are not present in the above mentioned location then you need to copy them from Informatica Installation Directory\PowerCenter 8.6.1\server\Infa_Shared\SrcFiles folder.
Hope this helps...................
Thanks,
Navin Kumar Bolla -
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Background:
I am relatively new to BW team and will be going through my 1st source system upgrade.
We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
We are upgrading to the source system to ECC 6.0.
In Development and QA Environments:
we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
We have a opportunity to compare the BW Objects, data flow and data loading from
both source systems.
In Production, however, we will just upgrade over 3 days downtime.
One Question that comes to mind in this regard...
What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
Some of the suggestions that were given to me include following points.
Before Upgrade:
1 Check data, taking pre images of it for testing with post upgrade.
2. Perform proper analysis of Source system related BW objects.
- A complete listing of actively used Datasources,.. etc.
3. Make delta queues empty,
Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
After Upgrade:
1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
(depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
Maintain Control Parameters for Data Transfer
http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
4. Check for Changes to extract structures in LBWE Customizing Cockpit
- OSS Notes 328181, 396647, 380078 and 762951
5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc.
Below is a link for some useful programs in this regard.
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
new/changed datasources,if needed.
8. Check all CMOD enhancements.
If we are using a customer exit with the extractor in the OLTP, see Note 393492.
7. Check for unicode (all custom programs or Function Modules for DataSources)
5. Check all the queues in RSA7, start delta runs and test data consistency.
For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
9. Take back up of data posted during upgrade for contingency planing.
10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
We have similar scenario -
We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
Our strategy in ECC deployment ->
In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
In production we are going to use same system PRXX upgraded from 4.7 to ECC.
Now we are in testing phase of ECC with all interfaces like BI in Dev.
My questions are below ->
How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
Also in new ECC sourcesystem copy we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
Is there any easy way for above scenario ?
Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
I have found some other links which have some pieces of information regarding the topic -
Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Re: ECC 6.0 Upgrade
Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
ECC 5.0 to ECC 6.0 upgrade
Thanks
Prasanth -
How DAC decodes its Source System Parameters into Informatica mappings??
Hi All,
I would like to know about "How DAC decodes its Source System Parameters into Informatica mappings??".
Is it an informatica mapping? or through a file? or its internal to DAC server?
Can we say the DAC server to decode it differently i.e. can we costomize the decode process? For example
$$START_DATE - i gave "Custom Format(1950-05-21 01.23.56) @MM/DD/YYYY" at dac - and it decodes as '05/21/1950' but I want it to decode as TO_DATE('05/21/1950','MM/DD/YYYY') is this possible?
Note that the informatica mapping takes the first decoding '05/21/1950' as number and through a sql error.....
Thanks for your time......
DKPlease set the values of $$FILTER_BY_SET_OF_BOOKS_ID, $$SET_OF_BOOKS_ID_LIST in DAC and check if the values get reflected in the parameter files that DAC generates for informatica at run time.
If this does'nt work, see if the BI services were restarted after doing change in the parameter file. The services need to be restarted in order to reflect the change. -
Field not delivered by source system - Deleted from rule
Dear Support,
While activating business content for example 0CRM_COMP,
I get the following error:
Field TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPETX not delivered by source system -> Deleted from rule
Similar errors for different fields appear.
My system config is
BI 7.0, SP14
BI Cont 703 Sp6
Any fix or solution will be suitable awarded.
Thanks and Regards
Raj JainHI Raj,
The business Content is not always consistent.
If you get messages like that, the best way to deal with them is to manually adjust the objects.
In this case it means that you will have to check the datasource. It may be that in R/3 you will have to "unhide" or add some fields to the datasource. (I cannot be sure as I cannot go into details).
Hope this helps,
Udo -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun -
Copy hidden system files from admin to client?
I'm preparing for a large rollout of Macs and one of our apps hides its license file with a . in front of the file name. Rather than type in the serial number 100 times, I'd like to simply blast out the license file via ARD to same relative location, but of course it's not visible to the OS/ARD. The containing folder is not hidden, it's just a single file that needs to be copied.
Is there any way to do this, perhaps by Unix cp command? How do you tell the remote computer to source the file from my computer, since the command is run locally on the remote machine. (Whew.)
Thank you.Lots of people are unaware of those extra options in the Finder Search. The other one that's commonly needed but not known about is the option to search system files, which is also under "other". You may want to check the "In Menu" box for those two so that they are available directly from the pulldown menu; they're both needed pretty often for many people.
Happy to have been of help.
Cheers. -
Source systems vanishes from RSA1 after renaming of the LSN after BDLS
Dear BW/BI Experts,
We are doing BW3.1 upgarde to BI7.0........After system copy there is need of rename of logical system for BP1 to BD1 (Prod. to Dev. and Dev. is our new Target BW system ) and From RP1 to RQ1. Before renaming I checked that all source systems were there in RSA1 i.e. Myself BW system , RP1 source system and Flat file source system as per SAP HOW TO ....System Copy in SAP Business Intelligence Systems Landscapes document. (almost 16 steps)
But after running renaming program by BDLS , I saw source systems are vanished from RSA1..........and now I am trying to create source systems manually.........system is not allowing the same...........pl suggest...........waiting for your experts opinion......pl help urgently as I am in problem fromn last many days and did system copy more than 2 times considering that there may be system copy problem.......
While RQ1CLNT100 creation i.e.Source system ....I am getting follwoing error.........
Entry in outbound table already exists
Message no. E0404
Diagnosis
A partner profile (outbound paramters) could be found using the following key:
/RQ1CLNT100/LS//RSRQST////
This relates to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
and also following error after activation..........
Entry in inbound table not found E0
Entry in inbound table not found E0
The BW IDoc type ZSBA014 is not the same as the source system IDoc type ZSBC044 RSAR
The following errors occurred in the source system: RSAR
Incorrect IDoc type ZSBA005 in the ALE definition of the source system RSAR
Best Regards,
SharadHi Sharad,
This is a very Basis-oriented task,
can your BD1 system can communicate with your peer ECC/R3 deveopment? you might need to run sm59 to ensure your RFC connection with ECC/R3 deveopment is communicating without problem.
once the RFC is ok, if you are familiar with WE20 and WE21 transactions, these transaction will configure IDoc setting (basis level) where you BI system will talk to, i believe IDoc are using old information copied from BP1 is still pointing to your ECC/R3 productive system at IDoc level. you will need to have Basis guy to help you out. please let me know if you need help on WE20 and 21, if you do, you need to provide me your current settings in BD1 and the peer ECC/R3 development setting as well.
cheers -
Source System changes from SAP System to BI Warehouse on ECC activation
We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira, -
Errors in R3load processes during Copy Source System ERP 2005
Hello,
I'm executing the Copy Source from an ERP 2005 SR2 nounicode system. In windows2003 32 bits.
During R3load processes I have the follow error for all packages.
I used the users "administrator" and <SID>adm, and in both the error is the same:
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: START OF LOG: 20091214170332
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#20 $ SAP
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: version R7.00/V1.4
Compiled Aug 24 2009 02:22:21
F:\usr\sap\QAS\SYS\exe\run\R3load.exe -ctf E X:\EXP_QAS\ABAP\DATA\SAPAPPL1_77.STR X:\EXP_QAS\ABAP\DB\DDLORA.TPL SAPAPPL1_77.TSK ORA -l SAPAPPL1_77.log
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: job completed
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: END OF LOG: 20091214170332
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: START OF LOG: 20091214170332
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#20 $ SAP
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: version R7.00/V1.4
Compiled Aug 24 2009 02:22:21
F:\usr\sap\QAS\SYS\exe\run\R3load.exe -e SAPAPPL1_77.cmd -l SAPAPPL1_77.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(DB) INFO: Export without hintfile
Alternate NameTab for type "BAPIPAREX_HELP" was missing and has been simulated.
Tab field CUEX-[9] has type DDic:168 ABAP:9
(SYSLOG) INFO: k CQ9 : CUEX&DDic:168&ABAP:9&field:9& rscpgdio 41
Tab field CUKN-[7] has type DDic:168 ABAP:9
(SYSLOG) INFO: k CQ9 : CUKN&DDic:168&ABAP:9&field:7& rscpgdio 41
Tab field CURSCOD-[5] has type DDic:168 ABAP:9
(SYSLOG) INFO: k CQ9 : CURSCOD&DDic:168&ABAP:9&field:5& rscpgdio 41
Tab field EDID2-[7] has type DDic:168 ABAP:9
(SYSLOG) INFO: k CQ9 : EDID2&DDic:168&ABAP:9&field:7& rscpgdio 41
Tab field EDID4-[7] has type DDic:168 ABAP:9
(SYSLOG) INFO: k CQ9 : EDID4&DDic:168&ABAP:9&field:7& rscpgdio 41
Tab field EDIDD_OLD-[6] has type DDic:168 ABAP:9
(SYSLOG) INFO: k CQ9 : EDIDD_OLD&DDic:168&ABAP:9&field:6& rscpgdio 41
Alternate NameTab for type "T52C5" was missing and has been simulated.
Tab field TPRI_PAR-[13] has type DDic:172 ABAP:8
(SYSLOG) INFO: k CQ9 : TPRI_PAR&DDic:172&ABAP:8&field:13& rscpgdio 41
(GSI) INFO: dbname = "QAS20061101081107 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "LDCTES15 "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "LDCTES15"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "4x Intel 801586 (Mod 33 Step 2)"
(BEK) ERROR: SAPSYSTEMNAME not in environment
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: job finished with 1 error(s)
F:\usr\sap\QAS\SYS\exe\run\R3load.exe: END OF LOG: 20091214170332
Best regards, Alberto.> (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
First I'd suggest you switch the database codepage to a supported one:
Note 102402 - Changing the database character set
> Tab field CUEX-[9] has type DDic:168 ABAP:9
> (SYSLOG) INFO: k CQ9 : CUEX&DDic:168&ABAP:9&field:9& rscpgdio 41
> Tab field CUKN-[7] has type DDic:168 ABAP:9
> (SYSLOG) INFO: k CQ9 : CUKN&DDic:168&ABAP:9&field:7& rscpgdio 41
> Tab field CURSCOD-[5] has type DDic:168 ABAP:9
> (SYSLOG) INFO: k CQ9 : CURSCOD&DDic:168&ABAP:9&field:5& rscpgdio 41
> Tab field EDID2-[7] has type DDic:168 ABAP:9
> (SYSLOG) INFO: k CQ9 : EDID2&DDic:168&ABAP:9&field:7& rscpgdio 41
> Tab field EDID4-[7] has type DDic:168 ABAP:9
> (SYSLOG) INFO: k CQ9 : EDID4&DDic:168&ABAP:9&field:7& rscpgdio 41
> Tab field EDIDD_OLD-[6] has type DDic:168 ABAP:9
> (SYSLOG) INFO: k CQ9 : EDIDD_OLD&DDic:168&ABAP:9&field:6& rscpgdio 41
> Alternate NameTab for type "T52C5" was missing and has been simulated.
> Tab field TPRI_PAR-[13] has type DDic:172 ABAP:8
> (SYSLOG) INFO: k CQ9 : TPRI_PAR&DDic:172&ABAP:8&field:13& rscpgdio 41
I'd execute a DDIC vs. database check in DB02OLD.
> (BEK) ERROR: SAPSYSTEMNAME not in environment
Is that variable set for <sid>adm?
Markus -
Corresponding table in the source system does not contain any data -URGENT
Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu -
Copy and paste image from PDF to another application
how do you copy and paste an image from PDF into another application such as Word or Excel? I know how to copy>> hover cursor over picture until it turns into a select "+" tool, select and right click to copy but when I try to paste it into another application, its loses all of its formatting. Thanks
Not sure what you mean by formatting of a picture. You can export all images and get a files to import to word. You can also use the snapshot tool, though it captures a screen copy. If you select an image and copy, my experience has been that it will only copy to PhotoShop, but it is not something I do very much. If the image is part of the document (not markup like a stamp or such), you can use the select tool to select the image and copy it to the clipboard. Just tried it and it worked fine. If it is a stamp (like pasted in), then you can not copy it in this way, if at all.
-
Hi,
Could anyone tell me please what parameter I have to set if I want to do an initial load stating with a given date (eg. 1/1/2009)?
I configured $$INITIAL_EXTRACT_DATE, but I noticed a different date for fact tables.
Which is the meaning of the following parameters (in DAC doc are not so well explained):
$$ANALYSIS_END
$$ANALYSIS_END_WID
$$ANALYSIS_START
$$ANALYSIS_START_WID
$$INITIAL_EXTRACT_DATE
$$LAST_EXTRACT_DATE
$$CURRENT_DATE
$$CURRENT_DATE_WID
Thanks,
I.Hey,
Do not worry as these parameters are for a host of different source systems ..
Initial Extract date is the one used for setting up the extract date for the full load be it dimensions or fact !!
HTH !! -
About source system parameters.
when I create a source system in BW for connecting to R/3,what's the meaning of available destination(it provide several options,I think they are logical system and all refer to BW itself).There are 2 logical server targets,BW and R/3,but they are the same system number.When I created a new source system,it always displayed that it already exited and refer to the BW self source system.It confuses me.Could you give me some hints? Thanks.
hi,
you have to create rfc connection both in r/3 and bw. the procedure i said should be done in bw. in r/3 your create rfc destination with bw logical system name. there is doc in bi best practice for the steps, point you later. i have no access to system now.
i think connection type should be '3', ip address/host name, user/password to login, most important is the destination name should be same as logical name. after maintained the parameter, have a 'test authorization' -
Copying instant portal application from onemachine to another machine
Hi,
In my first machine I have installed Oracle Application server 10.1.2.0.2 and upgraded Portal successfully to 10.1.4
and I created a Portal Application using Oracle Instant Portal.
now i have the same scenario of Application Server 10.1.2.0.2 along with its repository and Portal installed on my second machine and also upgraded Portal successfully to 10.1.4
Now how can i backup the Portal Application that i created in my first machine and install and run it in my second machine.
what i want to know is can we copy a Instant Portal application from one application server machine into another application server machine without having to re-create the entire instant portal application?
Can someone guide me please.
Thanks,
Philip.Actually we are not mapping machine name something in webutil.cfg file. We just need to specify the path that from where we will transfer the file from application server to client. And the time time of transfer the path you will
choose for client webutil will transfer the file on that location automatically.
-Ammad
Maybe you are looking for
-
Can more than one iPhone share a MS Outlook Calendar?
I successfully installed the iCloud control panel on my PC and was able to set up full access of my Outlook calendar on my new iPhone 4s. I wondered if it is possible if my wife (using an iPhone 4) can share the same Microsoft Outlook Calendar on he
-
Tax code maintained as ZERO, then also tax has been charged in billing docu
Tax code maintained as ZERO, then also tax has been charged in billing document. Please help to find some solution Point will be rewared accordinly.. DAVID
-
Payment proposal not picking up all documents
We have several credit memos for one vendor that are not picked up by the payment proposal run even though their due dates are within the payment run. These credit memos are manually created through FB60 and not through MIRO. In the payment proposa
-
Configuring MDB to receive message from MQSeries Queues bound on WL JNDI
Hi, I am using weblogic7.0 sp2. I need to configure my MDB to receive message from MQ Series (on a different server). The queue is bound to WL JNDI using a server startup program. Anyone with experiece, please help. Thanks, Fasih
-
How to create new MTA channels for redirecting mail.
I have to forward a mail to faxserver.Faxserver has its own mail id on messaging server.When I send a mail to a user on my messaging server it should automatically be forwarded to faxserver user account.For that I need to make a new rule and channel.