Copy standard include to z include

I have copied the include into LYMCB3_1I01
Now i want to add some cl=ode here but where i have to add the code there enhancement Section already exist...
Now when i try to add any code it gives me enhancement creation message and when i tried to create it it asks for
: enhancement spot , text , package (Must be standard ) , request ......
Though it doesnt allow me to create it

That means you have not specified the parameter name to which the selected value will be returned from the search help. Take a look at the standard one and mention the same parameter name.
Regards,
Ravi
Note : Please mark all the helpful answers

Similar Messages

Copying standard prog to custome program with includes that includes hd inc

Hi gurus,
i got one requirement,
I have to copy standard program to custome program with includes ,that includes con tain few more includes. so how can i copy all the includes into the custome progam.
please tel me.

Hi Vijayam,
In SE38, give the name of the standard program, in menubar goto program -> copy, which will take you to a pop up, check the checkbox for 'INCLUDES' to copy all the standard includes. But this will not copy the custom includes(starting with Z). To copy the custom include, you need to create new include in your copy program.To create a new include, click on icon 'Display Object List' which will display the objects list for your program, now right click on your program name in this list and select CREATE-> INCLUDE. Give the name of include and now copy the code from standard program include to your include.
I hope your problem is solved now.
Regards,
Pranjali

Copying Standard Reports including enhancements

Dear All,
Im tried to copy standard report mb5b but enhancements in that is not getting copied.
Please guide me.

Hi Dilip,
Which enhancements are you talking about ?
I dont see any enhancement in program RM07MLBD.
Best regards,
Prashant

I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and paste and doing the header separately from the text.

I need to make a copy of an entire email, including the header w/the sender's info and time, etc. to insert into a letter, etc. How can I do this w/out cutting and pasting the header separately from the text. I know there is a way besides a screen shot but I've spend hours trying to find it.

Smurfslayer wrote:
For the particularly persnickety types you might want to expose the full headers in the email message as well. It's easy enough to do, from mail's 'menu' select "view"; then "message"; then all headers.
Another option you could use is a screen capture using Grab.
Activate Grab, then shift + command + w (for a window screen shot). Then confirm the window selection and click the mail message.
Dave
Why are you addressing this to me...?
I am not the OP...

Copying standard report transaction selection screen

Hi everybody,
How can we copy standard report transaction's VI05 selection screen to my custom report transaction's selection screen some zprogram . The problem is that when i am copying the selection screen into my programs screen, it is getting copied, but not as selection screen rather as normal screen. I have defined a transaction code for the same with the custom screen no as the selection screen but its giving a message that selection screen 9001 doesn't exist. However if i keep the selection screen as 1000 the screen in the standard transaction VI05 the transaction is executing fine.
But again the problem was that although it seems that the screen 1000 of the standard program for VI05 has been copied to my custom program but its not showing in the object list of my custom program. so I cannot do any changes which i require.
If anybody requires any clarification u can raise your doubts i will try to make it more clear.
Can any body help me with this?
Your help will be deeply appreciated.
Thanks a lot!
Best Wishes!
Regards
Prem

Hi Prem,
Even if the GUI Status is active, you cannot see two components of Standard Selection Screen.
1. All Selections - Push Button
2. Categories - Screen Block in the first with two options
2.1. OI_STAND
2.2. OI_BULK
This is becoz, there are enhancement spots included in the Standard program and the enhancement spots will not be copied, unless you copy them manually.
Check the same.
Regards,
-Syed.

How ca we copy standard print program of SMARTFORM?

guyz...
how can we copy standard print program of RLB_INVOICE of invoice SMARTFORM to a Z program in ECC 6.0???
regards
Zid.

Hi,
enter the program name in the SE38 editor
click on copy button
then it will ask you for the new name
when ever you click on the copy transfer buton
then it will raise a pop and saying that what ever you want from the program like
1) INCLUDES
2)SCREENS
3)USER INTERFACES
4)VARIANTS
5) DOCUMANTATION
ETC..
hat ever you clcik on that check box
Thanks.

Copy Standard T.code into Z T.code

Hi,
I want to Copy Standard T.code into Z T.code....with all includes and Function Group......
Plz tell me step-by-step....
Prince

Hi,
When I do like u say....it shows ABAP RUNTIME ERRORS...
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)....
Now can I do....
Prince

Copying standard transaction to Z-Transaction

Hi,
I need to copy standard transaction to Z-Transaction,
i.e., MIRO to ZMIRO.
And then I need to insert some code in one of the include program of ZMIRO.
please tell me the various steps involve for copying a standard transaction.

While copying a standard transaction may at first seem the easy way to achieve the functionality you need, there are a number of longer term negatives with this approach.
If you copy major parts of SAP code like this, your copies will not be kept up to date as SAP OSS Notes are applied to the original using SNOTE. You can manually apply such changes, but this is nearly always forgotten as the person applying the note does not always realise there is a local copy.
This also applies when support packs are loaded - the SAP code can be changed without these changes being reflected in your copy. In the worst case scenario, the change may result in your copy of the transaction performing invalid updates to data and causing data integrity issues in your system.
When the time comes to upgrade the system, there will be a major amount of work in comparing the Z version of the code with the standard code to identify what is in the new version and to update the Z code - in a lot of cases this will mean a complete rebuild of the Z version is required.
It is far better to use available BADIs, user exits, enhancement points and even repairs using the object key to achieve the desired result so that tools like SNOTE, SPAU, etc can keep the basic code up to date with the latest patches.
Another option for some types of change is to build a custom screen that calls the standard transaction using BDC / Call Transaction or using a BAPI so that the data is presented as desired by the customer, but the updates still use the SAP supplied code.
Andrew

Copy standard prog to zprog

how to copy standard prog to zprog with existing enhancement and includes
i tried but enhancement and includes not copied...
please help me to give suitable example...
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 26, 2011 11:29 AM

I would check in SE71 to make sure the correct SAPscript layout is there and active.
You can check transaction SPAD. Be sure the LETTER in LANDSCAPE mode is supported for the specific device type assigned to the target printer in the test system.
As a last resort, you can purge the buffer for loaded layout sets with program RSTXDELL.

Copy Standard FM

I am trying to copy Standard FM IDOC_INPUT_ORDERS
( The Function Group and Includes ) .I am getting a message "There is more than one main program" if I double click on any function.
Question : Do I need to copy each and every includes into Z* ?
I fear since the Sub Includes are still Standard Incl.
when the performs are called would the passing variables still retain the value?
I am getting syntax error in one of the nested Incl.However allows me to activate the Main program without any issues?
Pl Advise

Hey Prakash,
Follow these steps :
Re: Copying a standard function module
Posted: May 5, 2006 12:13 AM Reply E-mail this post
1. The FUNCTION GROUP is VEDA
2. goto se80
3. open function group VEDA
4. Right-click on it and select copy.
5. Enter the new function group as ZVEDA.
6. Then it display all the function module IDOC_INPUT_ORDERS and
ask to copy it to new name.
7. Prefix Z to this fm.
8. click ok, and then it creates everything.
<b>Now activate the function group zveda. and then try to click on that user exit in the fm ZIDOC_INPUT_ORDERS .
It should work.</b>
Regards,
Kunal.
Message was edited by: Kunal Kumar
Message was edited by: Kunal Kumar

Copy standard cost with Cost Component from another material

Hi,
I need to copy standard cost from another material not only total price but also details of cost component split. I try to used transaction CKUC with procedure of "explode material cost estimate" but the reference material use "mixed costing" and isystem stop explosion.
There is another procedure in order to make this copy? I can not use special procurement because are different codes (material A / Plant XXX copy froma material B /Plant XXX).
Thanks for your support.
Mic

Hi Chandra,
thanks for your suggestion, it works but only if I explode a level ... material "B" contains two mix codes that also contain their mixes. So system shows this message "Mixed cost estimate explosion in level 2 for material xxx" and "Mixed cost estimate exists: maximum of 2 explosion level (s) possible".
So Is not possible to copy and esploded a standard cost with multi level mix?
Thanks
Michela

How to add new fields in sap copied standard form using itcsy structure

hi guys,
i want add some fields in sap script copied standard form using itcsy structure.
let me know the procedure with any example.
thanks,
anitha.

Hii anitha
plz c code below
Syntax goes like this
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
Example:
In script form
/: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
/: USING &EKKO-EKORG&
/: USING &EKPO-WERKS&
/: USING &EKKO-EKGRP&
/: USING &EKKO-BSTYP&
/: CHANGING &COMPNAME&
/: CHANGING &SENDADR&
/: CHANGING &INVCADR&
/: CHANGING &COMPADR&
/: CHANGING &COVERLTR&
/: CHANGING &SHIPADR&
/: CHANGING &REMINDER&
/: CHANGING &REJECTION&
/: CHANGING &POSTADR&
/: CHANGING &LOGO&
/: ENDPERFORM
In program
FORM Read_texts - To extract the standard texts from the table *
FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA : L_EKORG TYPE EKORG,
L_WERKS TYPE WERKS_D,
L_BSTYP TYPE BSTYP,
L_EKGRP TYPE BKGRP.
READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
CHECK SY-SUBRC = 0.
L_EKORG = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
CHECK SY-SUBRC = 0.
L_WERKS = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
CHECK SY-SUBRC = 0.
L_EKGRP = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
CHECK SY-SUBRC = 0.
L_BSTYP = IN_PAR-VALUE.
CLEAR Z08M1_ORG_TEXTS.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = L_BSTYP.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
AND WERKS = L_WERKS
AND EKGRP = L_EKGRP
AND BSTYP = SPACE.
ENDIF.
READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SENDADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'INVCADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COMPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REMINDER'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'REJECTION'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'POSTADR'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
MODIFY OUT_PAR INDEX SY-TABIX.
READ TABLE OUT_PAR WITH KEY 'LOGO'.
OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
reward points if useful
regards
Jaipal

Which option to choose:idoc user exit or copy standard idoc?

Hi gurus,
We are using idoc technolody to implement the interface between R3 and 3rd party system.
Most of idocs are inbound processing, and it seems standard idoc can't meet our all requirements.
So we are considering the option:i choose doc user exit or create new idoc by copying standard idoc.
Which way do you like better?What are the advantages and disadvantages of them?
Any help will be appreciated.
BTW, our customer will upgrade their R3 4.7 system to ECC6.0 after this project the next year.

Hi,
By making changes in the User-Exits, if you can achieve what you are looking for then I would recommend to use user-exits. SAP programs are not bug free and SAP keeps on updating them by releasing hundreds of notes every day. If customer is upgrading to new version in near future then using standard programs are the best option.
Cheers,

Copying Standard SAPScript to ZSapscript...

Hi,
I want to copy standard sapscript to zsapscript.
I go in SE71 and enter the name of Z sapascript form and then create. Now when I go to Menu-> Form-> copy from: I give form name as MR_PRINT and give language as EN.
It says MR_PRINT LANGUAGE EN is not available in client 120.
But when I again go to se71, and type MR_PRINT with labguage EN in the same client, it dispalys the form but says MR_PRINT from client 000 dispalyed.
How do I resolve this ?
Do I need to copy the script from client 000 to 120 ?
How do I do this ?
Thanks.
Regards,
Thomas.

hi Rajesh,
first of all copy the script from 000 to 120
here is the procedure
SAP Script is client dependent.
So you can use SCOT transaction to copy Transport request of SAP Script from one client to another.
You can use program RSTXSCRP also to transport SAP Script from one client to another.
Or from SE71 as SE71-> utlities->copy from client .
then u can copy from standard to z
if u find it useful mark the points
Regards,
Naveen

Include within an Include not loading?

On a page I have an Include, within that include is another include. However, the include that is already in an include doesn't appear to load or render. I double checked the file paths and those are correct.
Can I have an include within an include?

I just realized I missed something, oops!. I have an include within an include working but the include within an include within an include isn't. So it is three deep: Include > Include > Include. I know content holders work that deep but includes?
Didn't realize I was nesting them three deep until I followed the path.
{%include "/_System/includes/sign-in-form.tpl"-%} 

{%include "/_System/includes/signup-form.tpl"-%} 

{%include "/_System/includes/recaptcha-fix.tpl"-%}

Copying standard KANBAN adobeform in SAP SNC

Hi,
We have a requirement where we need to copy standard adobeform and add barcode to that for KANBAN process.
I have following questions regarding this:
1. while copying standard adobeform whether we need to copy Interface also?
2. How to find print program to that form i.e., where data is getting fetched for this form-the form is getting triggered from SNC system..menu path is as followsSNC Supplier role --->SNC Supplier View . When we click on Supplier view it is leaving to WEB UI and from there the Adobeform is getting triggered.
Can anyone explain how and where it is fetching data...
3.Where is the configuratgion done for this form(like in NACE in ECC)?
4.If there is any webdynpro component then where can we find the link for this web ui and form?
Thanks,

Hi Nilson,
The business processes mentioned can be used for any industry. There is not restriction as such.
These business processes are more relevant for those industry.
e.g. Outsourced Manufacturing / WO Collaboration is extensively used by High-Tech companies. Even the recent enhancement requirements have come from High-Tech companies.
Similarly, Kanban / SMI is extensively used by Automotive. But SMI is also popular with High-Tech.
CP industry is biggest consumer of Responsive Replenishment process.
Regards,
Sandeep

Copy standard include to z include

Similar Messages

Maybe you are looking for