Copy template from company to company

I have a PLD Template designed for one company. I like to use the same for another company as it is. I dont want to design a new template for the target company, just copy it and change the logo. How can I send it from One company database to other company database?
Thanks
SV Reddy

HI SV,
Yes ...you will have to copy tabel to table . This is a bit technical . You will havew to ask your tedchnical consulaten to look into it.
Also as you mentioned this can be achieved thru Copy Express the Link of which is as follows.
https://websmp204.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=LIST&HEADER=&FUNCTIONBAR=&EVENT=LIST&ONR=01200314690200005630&NTYPE=T_CV_DELO&V=MAINT&TA=ACTUAL&U=S0004811931&AI=SWTYPSC|&AI=PECCLSC|OS&AI=PECU_OS|WIN32&AI=DELO|20001686&AI=PVNR|01200314690900000261
Reward points if helpful
Regards,
Nagesh

Similar Messages

Error while trying to copy template from another application

Hi,
I am getting this error while trying to copy template from another application:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This report is located here:
Home-Application Builder-Application 150-Shared Components-Templates-Replace Templates
best regards,

It is usually a permissions issue.. you have read but not write permission. Why it would suddenly change is one of those Apple Mysteries... but it happens.
Open the directory (folder) where your media files are.. and check the permissions.. see if you can fix them.
The problem is the folder on the TC might have lost your ownership and you might not be able to change it.. Apple do not provide anyway to regain permissions because you would need low level access to the TC firmware.
I would just as a matter of course reset the TC to factory and redo its setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Do the setup via airport utility using different names.. short, no spaces and pure alphanumerics. Make sure passwords are also pure alphanumeric mixed case and numbers.. 8-20 characters is usually plenty.
Mount the disk in finder and see if you have the same issue.. I am not expecting a change.. but it is worth a try.
No luck you can copy your files off the TC.. wipe it .. and then copy them back.. no bad thing unless you already have a backup of your files at the moment. In which case you can just wipe the TC and copy the files now.

Copy Templates from VMM 2008 to VMM 2012 R2

Hi,
I would like to know if it was possible to copy Templates from VMM 2008 to VMM 2012 R2 ?
Thank you

I have never tried this, but you can for sure re-use the physical objects like VHD's, ISO's etc.
The template configuration and profiles are metadata stored in the database.
Based on how things changed with VMM 2012 compared with 2008, you will have several new options and capabilites in the profiles for 2012.
I would recommend you to re-create those (hardware profiles, guest os profiles, application profiles etc) in 2012, as there is no logical mapping from the previous versions.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Copy Material from company code!!

Hello SDN,
I have a requirement any help will be great..
I have two company codes 0020 and 0673...
the need is to copy all the Materials (all attributes) related to company code 0020 to 0673.
Anybody done anything like that before any suggestions code???
sorry wrong forum... how do i delete this post??
Many thanks
venkat
Message was edited by:
PANKAJ ARORA

sorry guys!!

How do you copy the templates from another webstie and use them as your own?

Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver? I would like to know I am a newbie when it comes to this program so please make your statement understandable for me, thanks. Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.

Hi Everyone, I was told that with Dreamweaver it is possible to copy another websites templates? What are the steps in copying another websites template with Dreamweaver?
This is difficult to understand. How are you copying templates from another site?
If you have all the files that make up the template, then it's only a matter of saving all the files to a folder on your hard drive and setting up a site definition pointing to this folder. You then work on the files as usual.
Also, I am having problems creating a drop down menu for each of my web pages. When I go to highlight a specific box on my homepage I want the dropdown menu to appear vertically and not horizontally. I may have missed something when watching the video tutorials or I didn't quite understand what they meant. Thank you for any information on the series of questions that I have asked in this new thread.
Without seeing the page it's difficult to judge what your problem is. If possible, please upload the files to a remote server and provide a link to the page. It's the only way people can help - if they see your page in action.
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Identifying which Layer is a template from Printing Company?

I've taken over a graphic design position, and am having a it of trouble with something simple. For a 28 page catalog, the printing company has told me that my predecessor's uploaded files (PDF's exported from .indd) contains their (the printing company's) template guidelines (rules for bleed, trim etc.). It looks like the standard procedure before I took over was to download the rule/guideline template from the company and simply apply it on our own InDesign file as a layer. They have told me that one of the layers in my InDesign file still contains the template guidelines, which show when printing. My predecessor thinks that the culprit layer is in the Master page, and while the two layers on the Master are there (one titled "Rule Border" one titled "Mask-1") one is a small blank box (moveable) and the other is a large (page size, locked) blank box. When I hide these layers or deselect the "Print Layer" or "Show Layer" options, artwork/content is deleted from multiple pages. Is there any way to identify which layer is which, or to view the properties/contents of each individual layer (specifically these blank boxes on the Master page)? OR is there a better solution? PLEASE HELP

Often when printing companies have a template for people to download it is usually not an InDesign template file.
Is is often a graphic; an EPS, PDF,Tif, or Jpg that can be placed on a layer to make sure elements are placed correctly.
Since this is probably one of these, try looking in the Links Manager for something with an unusual name that might be the template.
The Links Manager can tell you on which page it resides.
If you select the linked file in the list and click the page # to the right or the Go to Link icon at the bottom (Page icon with an arrow) it will go directly to the page and the item will be selected.
We don't know how it was originally placed, it might not even be on a Master Page. It might have been placed on Document pages, maybe even more than once.
Once you have determined where it is, the quickest way to hide this is to create a completely new layer and call it something like "Template - HIDE THIS!"
Drag the selected template image (and only the template image) to the new layer in the layers panel. As Joel Cherney has show above. the highlighted item on the page will have a colored dot to the right in the layer.
Drag this dot to the Template layer and the linked item will be moved there. You can then hide or delete the template layer.
It is also a good idea to LOCK any template layer since locking it will prevent you from accidently placing or moving elements onto this template layer!

Copy data from 1 company code to another company code

hi friends
my client has 3 company codes but now they want to close one company code for that they want to copy data from one company code to another company code after copying the data they want to delete that company code
i am fresher to sap(fico) please tell me the solution for this,
1) what is the process of copy from one company code data to another
2) what is rules and integrations for that

Company Codes are the individual identity and we have to give accounting details (Balance Sheet and Profit and Loss account) to statutory bodies so deletion of Company code or coping data from one to another is not posible and not suggested too.
Expalin your client to block all the transaction in one company code and transfer all the closing balance as per trail balance, open Purchase orders, open Sales orders, inventory valuation to another company code and start doing trasaction there.
This is the only solution as per my knowledge.
Uttam

Extend or copy configuration from one company code to another - 5 years old

hi friends,
we have typical scenario,
we are upgrading in next 6 months, in btwn we need urgently an ERP system for factory in another different country,
we have an 5years old existing SAP 4.7 system running all modules
so can i copy the configuration of existing system ( say 1000) to new company code (say 3000) and the new factory/country
suse this new company code 3000 for their erp needs ( SD,MM, PP)
questions
1) can i do this copy companycode using EC01... will it work? will it effect my current system
2) will it copy only the configuration (no changes were made to the source code of current sytem except for enhancements userexits)
3) by this method, what would be my new configuration at 3000
4) is it safe to do it
5) any other solutions
thanks
sai

so do you say, if i copy over the company code, i still need to do configuration, in that case, i did not understand the use of copy. i was thinking, if i copy most of configurations ( default) of the source will be copied over to new cc

Transfer from COmpany code to another Central Person..

My client req is to transfer one Employee from company code to another COmpany COde
COmpany COde      Number Range
HIL1           1000 - 50000
HIL2          100000 - 200000
Transfer EMployee 1111 from Company COde HIL1 to HIL2. SInce it is not possible to change his Number from 1111 to 100000 series it is not possible, I suggested to Seprate that employee from HIL1 and rehire in HIL. Now client wants all thta master data to be copied into HIL2 company code. Please adise how to handle this...
Thanks
Ravi.

Hi SAPHCM,
You are seeing some of the problems when you use Personnel Number to indicate something other than a specific individual. You should not separate blocks of PERNRs by Company Code or any other grouping for the reasons you are now seeing - people get tranferred and the PERNR should not change. The Organizational Assignment infotype contains all the fields necessary to separate out employees - PERNR should not be used for this.
If the Company Codes are in different countries, you can use the action "Cross Country Transfer". This will retain all the personal data infotypes for an employee while it terminates him from one country and hires him into the other. A better way to handle cross country transfers is "Global Employment". If you are in 4.7 and above you can activate this and it will allow you to have more than one personnel number for an employee. Here you use CP-Central Person to identify the employee.
Again, remove the separate blocks of numbers from being assigned by Company Code and your situation would be resolved by a simple transfer action.
Paul

Copy configuration between company codes tool

Hi,
I would like to know if we can copy configuration between company codes? If yes, how do we do that? I know there are some third party tools available, but couldnt recollect now. Any guesses?
Thanks,
Abdul

Since it are more than 200 customers, a manual operation isn't very efficient.
As I understand, no standard SAP programs exist to copy multiple customers from 1 company code to another. A new CATT will have to be created.
Does anyone have this kind of program, otherwise I will create it from scratch.
Thanks in advance.
Best regards,
Danny

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

How to determine current used ip address is from company wifi

Hello guys, currently doing an attendance app (ios / android) for user to check in / out (will capture location coordinate, current used IP and etc, then send back to the server). Besides will use C# web as back-end reporting.
At back-end reporting how do I determine or check the IP address being used is from company WiFi or not ?
The purpose of this is because ensure the user check in / out within the office area. On the other hand, sometimes user will outstation at client side and check in / out by using the app (ios / android).
Besides, any better ways to do this ?
Thanks

Hi loonloon,
Based on your description, your case related to ios / android app. Both of them are third-patry mobile product. I am afraid this is out of our support. Thanks for your understanding and effort.
Best regards,
kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Date format from Company code

Hi Experts,
I want to pick the date formate from company code and print it in invoice.can any tell me where i can find the date formate in the company code and what is the T-code for that.
Thanks in Advance..

actually, the date format is maintained to the country only not to the company code. So if u want to change the date format, u can change that in the country where ur company code exists
The Tr. code is OY01
Reward if useful.

Amount conversion from company code to another currency?

Hi all,
I want to develop a report report in which I need to convert the amount from company code currency to foreign currency.
but before that should it be converted from company code currency to group currency which is standardized one?
means suppose I have company code currency GBP , grp currency USD and user selects EUR for amount currency.
then should I go like this: GBP to USD then USD to EUR.
I am using the FM : CONVERT_AMOUNT_TO_CURRENCY.
rgds,
Madhuri

Hi,
Check out this thread...
Currency Conversion
Regards,
Lydia

Deleting currency from company code

hi Guys,
I would like like to delete currency from company code. I have tried to delete it through IMG but i am being given the following error:-
Cannot delete currency because it contains transaction data.
May you please show how i can delete the currency on company code if possible.
Best regards.
Stitch

hi,
you cannot delete your currency from comp.code.
if you've a curr-conversion ask your SAP consultant / OSS
Andreas

Copy template from company to company

Similar Messages

Maybe you are looking for