Copy the file in a nother disk and bott from there

Hi,
i have a disk with my file all in the same slice:
Filesystem size used avail capacity Mounted on
/dev/dsk/c1t0d0s0 63G 49G 13G 79% /
/proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
fd 0K 0K 0K 0% /dev/fd
swap 11G 16K 11G 1% /var/run
swap 512M 344K 512M 1% /tmp
now i have a second disk and i have an nother partiton:
Part Tag Flag Cylinders Size Blocks
0 root wm 824 - 1688 4.20GB (865/0/0) 8802240
1 swap wu 0 - 823 4.00GB (824/0/0) 8385024
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 var wm 1689 - 2925 6.00GB (1237/0/0) 12587712
4 usr wm 2926 - 4162 6.00GB (1237/0/0) 12587712
5 unassigned wm 4163 - 14065 48.05GB (9903/0/0) 100772928
6 unassigned wm 14066 - 14086 104.34MB (21/0/0) 213696
7 unassigned wu 0 0 (0/0/0) 0
I mount the slice from the second disk:
/dev/dsk/c1t1d0s3 6198606 157424 5979196 3% /disk1/var
/dev/dsk/c1t1d0s5 49625344 34310869 14818222 70% /disk1/opt
/dev/dsk/c1t1d0s4 6198606 6198606 0 100% /disk1/usr
and copy with:
cp -p -r /opt /disk1
cp -p -r /var /disk1
cp -p -r /usr /disk1
Can i do that so?
an how i can boot from disk2?
Thanks
regards,
mayas
Edited by: dasdasdadad on 27.04.2010 12:29

I've seen posts about chapters missing or not being able to open ibooks, but I can't remember seeing any about missing words (though I don't see every post).
Try deleting the book from the bookshelf in the app (there should be an Edit button at the top of the bookshelf), and then redownload it via the Purchased tab in the ibookstore in the app (ibooks will be redownloadable as long as they remain in your country' store, and if you don't change countries).
If if it re-downloads in the same state then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Similar Messages

Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually.

Hi. Downloaded iphone 6.0 and my video playlists in "Music" are now gone, but their names are still there. The videos are still in "Videos" and play from there 1 at a time manually. It gets weirder:
When looking at the empty screen with the name of my former playlist on top, if I tap the edit button on the phone, tap the + button to add a 'song' to the playlist, and then tap 'Done' without adding anything, I can see all my videos in the playlist with the red minus symbol next to each of them. But as soon as I tap 'Done' again they all disappear!
I saw on another forum that someone has had the same problem but fixed it by, and I quote
"If you go to Get Info and change the Media Kind from Movie to Music Video under the Options tab, they all now appear in the playlists!"
I'm happy this worked for him, but when I tap "File" in itunes, the "Get info" field is greyed out, so I can't test the solution proposed.
Any ideas?
Thanks

Same problem on my ipad 2...but it works well on my iphone 4s.
Can somebody help me?
Thank you

Restoring my mac book pro after copying the files off via target disk

Hi guys any help would be great.
I had a problem with my hard drive in my early MBP, after seeing an apple genius, who said it was mostly likely a software issue and wiping the disk and reinstalling everything shoudl fix it.
So as i didnt have an up to date time machine back up, i used the target disk utility to copy the files from the drive over onto another mac (actualy on a networked harddrive)
no i have completed a wipe, and reinstalled the operating system (snow leapeard as thats the last disc i had - MBP was on Lion prior to the issues)
now i want to restore all my files from before.
what is the best way to do this?
can i just drag and drop each file from the networked hard drive back into the coresponding ones on my MBP?
thanks

Only your users files inside music, pictures, movies documents etc folders.
Nothing in Library, nor Applcations, you do that you hose the account and the apps won't work anyway, at least most of them.
or i will have to reinstall the aplications but i tunes and so on will be able to find the files?
yes and reinport music into iTunes so it goes into the new itunes library file, ditto with iPhoto Library (old) righ click and "show package contents" and import the Originals folder contents into new iPhoto library.
support files have paths in their files that go to the path on the origanl system, you changed that so the paths are off, so you import the original files again.

I can't open my iphoto library on an external disk (78 gb ntfs); if i copy the files on the iMac the file is smaller and not usable. how can i recover my photo?

hi all,
i'm using the last version of iPhoto and i save my library on a western digital external USB drive; the drive is formatted in NTFS; i usually use tuxera to access and browse the files.
Unfortunately, i don't know why, i access this drive in read only mode, so iPhoto doesn't accept the library any more; i tried to copy the library on the iMac but the copied file is really smaller (54 gb instead on the 78 on the drive), and iphoto doesn't accept it.
i need to find a solution and to recover my library, i've no other copies?!
tuxera doesn't open any other ntfs drive i think the problem is there, but i have to finf other solutions to recover my photos.
thank you all for any suggestion.

This problem is entirely due to this:
the drive is formatted in NTFS
iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
Do you get any error messages when you try and copy the file back to your Mac?
Do you have a back up?

Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files, and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??

Music I already have on my computer will not pull up in itunes. I dragged the files, copied the files, and even tried adding the files but nothing works. The songs play on any other program except for itunes. What do I do??

OMG......THANK YOU THANK YOU......I been reading articles after articles and nothing was working......tryed the Crtl+S and there it was. I can not thank you enough......I appricate it Can not believe it was that simple. I am one happy person again.....

How can I copy my Itunes-library from Iphone to my new Mac, as I forgot to copy the files from the old PC, and now it is to late. I only have music on my Iphone.

How can I copy my Itunes-library from Iphone to my new Mac, as I forgot to copy the files from the old PC, and now it is to late. I only have music on my Iphone4. Thank you.
gunnarfromhovik

For iTunes purchases only..
Connect the iPhone to your Mac, launch iTunes.
If you haven't done this yet, go to the iTunes menu bar click Store / Authorize This Computer
Now from the iTunes menu bar again, click File / Transfer Purchases From...

I had to transferr my music files from one computer to another by directly copying the files from the hard drive to a new drive. Itunes recognized the files and I was able to load in new songs. The new songs won't sync with ipod. Ideas?

To copy the files I had to remove the hard drive and direct copy them to an expansion drive on another machine. ITunes recognized the copied files and operates correctly on the computer. I was able to download additional songs to ITunes on the computer without problem. The IPod however will not recognize the new songs, does an abreviated sync process and gives a message that the IPod cannot sync because files are being used by another application. It is also does not want to accept the disconnect command. Any suggestions on how to solve the sync problem?

how did you save the songs? can you play the songs? have you restarted the computer?

I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install b

I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?

If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
The gray area below the blue bar is a link to start a chat.

I think the DVD player reader on my Mac is going bad. Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive?

I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
Thanks.
Bob

Adding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
I use my system for business and need it to work reliably. Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase.

SOLVED: The file or folder is corrupted and unreadable.

On a Windows 7 Pro workstation, whenever a user logs in, they receive an error that the file C:\Windows\System32\en-us\winlogon.exe.mui is missing or corrupted. Every normal restart of Windows automatically invokes chkdsk c: /f. I've tried the
following:
Run chkdsk c: /f /r. The first run found several soft problems, but no physical problems with the drive. A subsequent run found no problems.
Checking the memory. A bad stick was found and replaced. A re-run of the memory diagnostic with the new memory returns no errors. I believe that the problem was caused by the bad memory.
Run sfc /scannow. The CBS.log reveals that there are problems that can't be fixed.
An upgrade re-installation of the OS. It fails saying that there are problems on the disk.
Upon investigation, the file winlogon.exe.mui is missing, but there is now a subfolder by that name in C:\Windows\System32\en-us. That folder is not normal and, as far as I know, shouldn't exist. The folder cannot be deleted or renamed. All attempts to do
so fail with an error that "the file or folder is corrupt". Attempts to copy the file obtained from another computer also fail with the same error.
Every normal restart of Windows automatically invokes chkdsk c: /f, but no errors are reported. I've even tried booting from a USB-based OS and running chkdsk on the drive, but no errors are reported, although the error persists.
Before I reformat the drive and start from scratch (it's a custom workstation that will take more than a day to rebuild), I thought I'd ask if anyone has any ideas about what I can do. I'll be grateful for any suggestions.

Hi David,
Thank you for sharing your solutions and experience here. It will be very beneficial for other community members who have similar questions.
Karen Hu
TechNet Community Support

Copy, count files, test path, process indicator and System.IO.FileInfo

I found this, sctipt, that I try to re-write.
As it is, it creates sub folders in the targetfolder, which I found out how to stop it from, by deleting the "\" backslash sign in line 9.
But what I also want is that subfolders if such should exist, also gets copied from $source to $target folder, as of now this doesn't happen. Reason why I chose to try to re-write the script is basically, I can read what it does and I like all the flashy
Things like counting and that it shows the percentage of the processbar AND the processbar :).
I just don't now how to re-write it proberly. By the way nothing should be re-named in the targetfolder every thing from sourcefolder should be "as is" in the sourcefolder.
$SourceFolder = "C:\Color1\TRID"
$targetFolder = “C:\Color2\TRID”
$numFiles = (Get-ChildItem -Path $SourceFolder -Filter *.*).Count
$i=0
clear-host;
Write-Host ‘This script will copy ‘ $numFiles ‘ files from ‘ $SourceFolder ‘ to ‘ $targetFolder
Read-host -prompt ‘Press enter to start copying the files’
Get-ChildItem -Path $SourceFolder -Filter *.* | %{
[System.IO.FileInfo]$destination = (Join-Path -Path $targetFolder -ChildPath $_.Name.replace(“_”,“\”))
if(!(Test-Path -Path $destination.Directory ))
New-item -Path $destination.Directory.FullName -ItemType Directory
[int]$percent = $i / $numFiles * 100
copy-item -Path $_.FullName -Destination $Destination.FullName
write-Progress -Activity “Copying … ($percent %)” -status $_ -PercentComplete $percent -verbose
$i++
Write-Host ‘Total number of files read from directory ‘$SourceFolder ‘ is ‘ $numFiles
Write-Host ‘Total number of files that was copied to ‘$targetFolder ‘ is ‘ $i
Read-host -prompt “Press enter to complete…”
clear-host;

@Jaap
Yes I want to overwrite existing files, since backup is taken care of by another script.
Now I encounter this error when trying to use your write-progress example:
Get-ChildItem : A parameter cannot be found that matches parameter name 'Files'.
At line:3 char:51
+ $Files = Get-ChildItem -LiteralPath $SourceFolder -Files
+
~~~~~~
    + CategoryInfo          : InvalidArgument: (:) [Get-ChildItem], ParameterBindingException
    + FullyQualifiedErrorId : NamedParameterNotFound,Microsoft.PowerShell.Commands.GetChildItemCommand
cmdlet ForEach-Object at command pipeline position 1
Supply values for the following parameters:
Process[0]:
Here is the script as I thought it should look like:
$SourceFolder = "C:\Color1\TRID"
$targetFolder = “C:\Color2”
$Files = Get-ChildItem -LiteralPath $SourceFolder -Files
$NumberofFiles = $Files.Count
$Files | ForEach-Object -Begin {
$FilesCopied = 0
-progress{
Write-Progress -Activity "Copying Files..." -PercentComplete [int](($FilesCopied/$NumberofFiles)*100) -CurrentOperation "$FilesCopied files copied out of total of $NumberofFiles files" -Status "Please wait."
"$((Get-ChildItem -Recurse -File -LiteralPath $SourceFolder).Count) files will be copied to $targetfolder"
Read-Host -Prompt 'Press Enter to Start Copying...'
Copy-Item $SourceFolder -Recurse -Destination $targetFolder -Force -verbose
$FilesCopied++
# What is wrong now?

Ipod cannot be synced. The file or directory is corrupted and unreadable

I have recently had to reload windows xp home edition on my computer and wanted to connect my ipod to load some new music. As it was a new installation the ipod was not recognised. I loaded to latest version of itunes that I have just downloaded and was asked whether I wanted to sync my ipod with this computer in which case I would lose everything that was on the ipod. I choose yes to sync to the new computer but got the error message "the ipod "ipod" cannot be synced. The file or directory is corrupted and unreadable". I simply recharged the ipod and continued to use it for a day but then it just ran through the tracks without playing anything until it came to the end of an album and returned to the main menu.
As I cannot play anything I wanted to restore and reload but cant. Could anyone offer any help ? Thanks
60gb photo Windows XP
60 gb photo Windows XP

I have just managed to connect my ipod through itunes to restore it. However when I tried to connect it to the wall socket to complete the update nothing happens. I have checked the fuse in the plug and that is okay, but the ipod does nothing, not even a light on the display when connected. It seems to have locked up. If I hold it close to my ear I can hear a gentle hum. Also the ipod is not showing up in windows explorer.
Any suggestions ?
Thanks

Problem in copying the file

i had created a frame in which iam getting a source file and then copies the file to certain location...the problem is when i copy a large file it is doing well for the first time but when the second time while iam copying exception occurs like this
Exception in thread "AWT-EventQueue-0" java.lang.OutOfMemoryError: Java heap space
iam using the code
public static void copy(File source, File dest) throws IOException {
     FileChannel in = null, out = null;
     try {
          in = new FileInputStream(source).getChannel();
          out = new FileOutputStream(dest).getChannel();
          long size = in.size();
          MappedByteBuffer buf = in.map(FileChannel.MapMode.READ_ONLY, 0, size);
          out.write(buf);
     } finally {
          if (in != null)          in.close();
          if (out != null)     out.close();
    }how to solve this

Do you simply want to copy the file. Try, not using many non-instrictive data types, because these use many extra variables and you end up using a lot more memory than you would have req.
Eg-
public void copy(File source,File dest) throws IOException{
     FileInputStream fins=new FileInputStream(source);
     byte[]b=new byte[(int)fins.length()];
     fins.read(b);
     fins.close();
     FileOutputStream fos=new FileOutputStream(dest);
     fos.write(b);
     fos.close();
}This is code is not a solution, because here i am reading all file at once. This is basically to show you a method.
In real situation you can set the size of byte[]b to 1024, and loop util read(b); method returns -1.

I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message

I've edited my NEF photos in lightroom and have tried to export to a formatted CD. When I try, I have several issues. I either see in the top left corner that the files are ready to go to CD but there is no further instruction or I get the pop up message that the files are offline or missing??

Just for background, in what format are you exporting your images? Also, are you able to export them to your hard drive in your chosen format? I haven't tried exporting directly to CD, but if you're able to export to hard drive and copy to CD, that may be one solution.

Copy the file in a nother disk and bott from there

Similar Messages

Maybe you are looking for