Copy the Movement types in OMJJ

Hi,
I have copied one movement type from 303 to 403. I assigned the tcode o MB1B and MIGO.
Now I try to check in MB1B, Its no showing 403 mov type..but if I give manually, its allowing and working perfectlly..
Anywhere any setting is missing while copy the mov type in OMJJ..
Please Guide me.
Regards,
Priya

Hi
I am not sure of functioning of mvt types 401-403 which donot have any updates (value wise) but only quantity wise updation is there. 403 is standard mvt type defined by SAP, I hope it is not relevant for transfer posting where quantity and value will be updated. When I tried with Tcode MB11, it is appearing where as for MIGO, MB1B/A it is not. Hope its functionality doesnt support these Tcodes.
When you copy any existing mvt type to other, use Z or X as prefix so that it will not fall under standard types.
Thanks

Similar Messages

The movement type 261 is greyed out in MIGO

HI Experts,
We have a scenario where we want to use the copy of movement type 261 to post goods issue against a process order. In MIGO even if I change it in the initial screen and execute, system takes only 261. System is not allowing to change it in the tab "Where". The field for mvt type in this tab is greyed out.
But we have created a movement type to post the goods receipt which is copy of 101. This is working fine. System takes this movement type when we enter it in the initial screen and copies to the tab where.
How to solve this issue?
Request your expert advice.
Regards
Prathib

Hi Ajit,
Thanks for the reply. Here the issue is we wanted to use the customized movement type only for a particular type of order. For all the other order we should use 261 only.
I dont think this can be done through standard SAP. Is there any user exit or BADI for the same?
Please let me know.
Thanks & Regards
Prathib

Restriction of Selecting Reason for movement based on the movement type

HI,
Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
Example:
Defined the Reason for movements 0001 & 0002 for the movement type 561.
Defined the Reason for movements 0003 & 0004 for the movement type 563.
During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
it needs to be controlled w.r.to the movement type.
that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
Is it possible to control, the selection of "reason for movement" based on the movement type ?
thanks in advance for your help.

Hi Sundar,
Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
Hope this help.
Regards
Ankush

MIGO : When the movement type field is changed in transaction is changed.

Hi
If the movement type field value is changed in the MIGO, i was getting a popup. this popup had a check box ( skip in future)
I selected this and was doing my testing. Now how to restore it back. please help.

Hi,
Go to MIGO
Here in Menu Settings > Default values
Here click on "Redisplay tips already read"
And click on "Adopt" button and then check in MIGO, it will start displaying the message pop-up

What is the movement type?

Hi,
can the movement type 531be used for posting of GR from by-product of an Production order from the production storage area? is it the right one for the particular action??Plz reply.
Thanks in advance

Hi,
Just to double confirm, this Mov type 532. is posted from Storage area, once its recieves the semi-finished goods from production site nuh.
Thank u.
Diana

What is the movement type on stock transfer across company codes

<Deleted original post contents and retypes in capitalized letters - moderator >
What is the movement type at the time of stock transfer between the company codes..
Edited by: Arun Varadarajan on Sep 1, 2008 10:56 PM

HI,
Stock Transport Orders : -
1. Plant to Plant one Step - Transfer Posting using Mvt Type 301
2. Plant to Plant two Step - GI:303 & GR: 305
3. Stock. Transport Order. w/o SD - GI: 351 & GR: 101
4. Stock. Transport Order with SD - GI: 641 & GR: 101
5. Stock. Transport Order with billing - GI: 643 & GR: 101
Refer STO's in the below path for more details
http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
Thanks & Regards,
Kiran

What is the movement type to post customer return stock to qaulity inspec

Hi All
What is the movement type to post customer return stock to qaulity inspection stock
i am doing retuns process when ever i do post goods reciept in the return delivery return stock should automatically go to the quality inspection stock.
pls give advises
thnx

Hi
In your return order schedule line category DN (DN is the schedule line category of the return order in standard ) you need assign movement type 655
If you assign movement type 655 when you do PGR for the return delivery, stocks will sit in Quality inspection directly
653 will move stocks directly to unrestricted (Strictly not advisable)
651 will move stocks to blocked customer returns (recommended by SAP)
Regards
Raja

Open TR the movement types 930 up to 935 have to be added

Hi guys
LL01 open TR the movement types 930 up to 935 have to be added to warehouse 001
How can I do this requirement
Thanks In Advance
SAP MM

IMG > Logistics execution > WM > Planning and Monitoring > Warehouse Activity Monitor > Define Critical Parameters
there you have to define the critical parameters per movement type.

LL01 open TR the movement types 930 up to 935 have to be added to warehouse

Hi Guys
LL01 open TR the movement types 930 up to 935 have to be added to warehouse 001
How can I do this requirement
Thanks In Advance
SAP MM

IMG > Logistics execution > WM > Planning and Monitoring > Warehouse Activity Monitor > Define Critical Parameters
there you have to define the critical parameters per movement type.

Examples on usage the movement types 413E and 412E

In what circumstances we are use the movement types 413E and 412E with some practical examples
413E : Transfer posting Sales order to sales order
412E : Reversal of sales order to own

Hi,
413E can be used while posting the Quantities which are diverted from one Sales Order to another Sales order of same/different customer. Like from Customer A to Customer B.
412E can be used posting back the Quantities from sales order stock to unrestricted stock.
Regards
SD

The movement type 262 is not working as expected

Hi,
I have issued a component using the movement type 261. When I try to reverse the issued material using 262 movement type, it is creating the material document number as movement type 261 only. Please let me know how to reverse the material using the movement type 262.
When I try with 262, I'm getting the error as serial number is already issued try some other serial number. The stock is not getting refreshed properly. 261 is working fine but not 262.
Thanks in Advance,
Mohan.

If you are using MIGO, use the combination of 'return delivery' with 'material document' (that was created with 261) - this works with full or partial reversals. If you simply want to cancel/reverse the entire document then use 'cancellation' with 'material document.

What will be the movement type when goods are returned from customers

what will be the movement type when goods are returned from customers

Hello Ravinder,
Please see the following description in the SAP Library
(http://help.sap.com) under the path:
Materials Management (MM)
-> Inventory Management (MM-IM)
    -> Inventory Management and Physical Inventory (MM-IM)
       -> Goods Receipt
          -> Other Goods Receipts
             -> Entering a Customer Return
" Entering a Customer Return
Since returns from the customer are usually examined, the quantity
returned is first posted to blocked stock returns. As is the case with
goods receipt blocked stock, blocked stock returns are neither valuated
nor do they count as unrestricted-use stock.
If an examination proves that the returned quantity should be taken over
into unrestricted-use stock, you enter the transfer to unrestricted-use
stock in a second step. It is at that time that the valuation of the
goods receipt occurs.
Depending on how Customizing for Sales is configured (the movement type
configured in the step Define Schedule Line Category), the delivery is
posted to the following stock:
- Blocked stock returns (non-valuated, not unrestricted-use) (movement
type 651)
- Unrestricted-use stock (movement type 653)
- Quality inspection stock (movement type 655)
- Blocked stock (movement type 657)
If the given quantity is posted to blocked stock returns first, you can
make a manual goods movement posting in the Inventory Management
component to transfer the quantity to valuated stock.
If blocked stock returns are to be transferred into your company's own
stock, you enter the transfer as a transfer posting. Choose movement
type 453 (to unrestricted-use stock), 457 (to stock in quality
inspection stock), or 459 (to blocked stock). "
Hope this helps!
Regards,
Shanthala Kudva.

Error while copying a movement type

Hi all,
I want to create an movement type alternate to 501which will only update the qty not the value.
1. For this I have copied movement type 501 through t code OMJJ.
2. While copying I changed the target movement type as "Y01".
3. Selected the option of "Copy all dependent entries"
Now i wanted to modify/delete some dependent entries to get the desired result, but unable to do so.
such as in section "Update control / WM movement types" , I want to have only 3 lines and want to delete all other lines of special stocks, but unable to do so.
Similarly with field "Account grouping", system not allowing me to delete any entries.
Please suggest.
BKR

Hi,
You just need to delete two items from the customizing view, go to next step, that will be okay!
Regards
Tao

How do I share my movies with my wife's iTunes account on the same iMac, without having to actually copy the movie into her library?

I apologize if this is already in the forum somewhere, I simply could not find this question being asked anywhere. We have an iMac running Lion with all of the latest updates as well as the latest version of iTunes. All of the digital movies we've purchased through iTunes, have been purchased through my iTunes account. However, my wife is the one with the iPad, and syncs it with her own iTunes library and her own Apple ID. I have turned on Homesharing for my library, and she can see my library from within her iTunes account. We turned on the feature to automatically copy new movies into her library so that she could sync those movies onto her iPad. However, I quickly discovered that it is literally storing a second copy of the movie file in her iTunes folder, and therefore eating up precious hard drive space. Is there a way for her to "check" movies in my homeshare library from within iTunes to sync with her iPad when she connects it, without actually copying those movies into her iTunes folder? If not, any suggestions on how we can solve this issue?

What you're describing is the expected behaviour. I believe though that is also is the easiest way to have all the contents available to both of you at all times. If you have a spacious hard drive you should probably allow this to happen as anything else will be harder to manage.
My suggestion would be the following if you want to try something different.
Store all your music at a location that is accessible by both of you — an example would be to use your Public Folder as the locations where iTunes will go and look for all the media files—. Your wife does have access to it.
In the Finder you will need to move the folder name iTunes Music to the location in your Public Folder (see above). Once that's done, you and your wife will have to go into the iTunes Preferences > Advance Preferences and un-check Copy files to iTunes Media folder when adding to library. From this point on, you can continue to use iTunes as usual. You'll need to tell your wife what has been newly downloaded/imported into your iTunes so she can manually go look for those items in that Public Folder iTunes of yours and import them into her iTunes. She will not duplicate by doing that, but, like I say this is an all-manual work.
She can do the same, so you have access to contents she imported herself. One more downside of this is that both usernames have to be active in your iMac. If yours isn't, she won't be able to access any item (song, book, app) located in your Public Folder's iTunes.
I'm sure there's a way, if you have an router with external hard drive conectivity, for both of you to be able to access —independently— the iTunes Media at all times but I was just reading at another post that doing so can further complicate things.
Hope this helps. Please let me know what you think or decide to do.
Jorge...

Accounting doc for the movement types

hi gurus
i want to know the accounting documents created while we transfer posting the stock in all possible movement types. and also tell me how many accounting documents created per transaction.
regards
Ram
09486627305

go to MB03 and enter the material document no and go inside go for finnancial document there in you can see the acc documents for that material document.
Only one acc document created for each material movement which are subject to account postings.
or try MB51 list of material documents once you run the list there in you can chaeck the FI document for each material document nuber dispalyed in the list.
Regards
Sujoy

Copy the Movement types in OMJJ

Similar Messages

Maybe you are looking for