Copy the PR header Text to RFQ header Text while Creating W.R.T

Dear Guru's
While Creating with reference I want to Copy the PR Header text into  RFQ Header Text..
Please do the needfulll
Thanks in Advance.
GSANA

Dear You can not copy the header text of PR to RFQ in the standard SAp, as PR is internal document and RFQ is external. but if you even want to do it then contact your ABAP team.
regards,
qsm sap

Similar Messages

  • Populating text in RFQ header

    Hi all,
    I have the below the requirement.
    Whenever RFQ is created (manually, referring PR thru ME57, or referring contract) some
    text need to be populated in 'Header text' of RFQ Header.
    How to achieve the requirement? Are there any user exit which could fulfill
    this requirement.
    Please give your inputs.
    Regards,
    Partha

    Hi,
    Can you please explain in detail?
    My requirement is that the text need to be populated automatically
    whenever RFQ is created.No User intervention on this.
    Partha

  • How can I copy the date and time in Mail header?

    How can I copy the date and time in Mail header?
    I can copy everything else in the header for pasting in another application. 
    But not the date and time which is absolutely vital.
    It was ok in 10.6 

    I suppose you could copy it from the Raw Source. View>Message>Raw Source

  • PR HEADER NOTE TEXT TO RFQ HEADER NOTE TEXT

    Hello all
    We are maintaining the PR Header Note & we are creating the RFQ with reference to the PR , we are maintaing the PR Header note , but it is not getting copy in RFQ Header note
    Kindly suggest
    Thanks in advance
    Regards,
    Rajesh

    hello
    Thanks for reply
    After selecting the Header note in RFQ under Copying rules for header text & Selecting the Header note only text linkage is allow is RFQ
    whether i have to make new entry as PR
    No entry of PR availbale in for selection
    Please suggest
    regards
    Rajesh Dalal

  • The registration program InetReg.exe crashes: Exception occurs while creating thr

    Hi
    I could not complete the registration because the registrationprogram InetReg.exe crashes.
    The error is is displayed in a small dialog right after it has detected the soundcard: Exception occurs while creating thread.
    What is the problem? How do I find out what the problem is? How do I fix it's

    I have been mailing with Creatives technical support about this and other problems.
    It seems like they do not know what is causing them. They simply did the usual turn a lot of stuff off procedure in order to find out if something ruined the installation of the software. I have tried these things, and it didn't solve any of the problems with the software except that it finally enabled me to install one of the software modules that otherwise could not be installed.
    Try to search in Creatives forums for post from me, if you want to know more details.
    I have a feeling that I have to reinstall Windows XP again and install the Creative software on this clean installation of Windows. I think the problem is that some of the other software is in conflict with Creatives software, but Creative apparently do not know what that software is and neither do I
    Creative should investigate this.

  • HT2534 why the visa card of nepal bank didnot accept while creating itunes account??

    how to creat my itunes account in nepal??

    Are you in Nepal...
    You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

  • Can you copy the contents of an iPod onto a new PC?

    A friend of mine has an iPod and is considering buying a new PC. Because of circumstances he cannot get his library from his old PC. Is it possible for him to copy the contents of his iPod onto new PC to create a new library?

    David,
    These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software
    PodUtil Software
    Senuti (Mac OS X v10.3 or higher Recovery Utility)
    XPlay (Software For Music Recovery &/or Cross-Platform Functionality)
    XPlay Photo Browser (For recovering Photos)
    After recovering your song files, strongly consider developing a thorough backup strategy for just this type of situation.
    You need at least three sets of your music:
    -- One full set on the PC within iTunes (on internal HD or ExHD)
    -- One full set on an separate external backup medium (CD/DVD/ExHD/other)
    -- One (full or partial) set on the iPod
    Music files on just the iPod and the computer is not considered having any backup. If you cannot store your complete music files on the computer, then create and maintain two external sets.
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a thorough backup strategy: http://discussions.apple.com/click.jspa?searchID=394618&messageID=1263275

  • Copying the PLD

    After creating the PLD I want to copy the PLD to another PLD.
    For example I created A/R invoice PLD and the field are same in A/P invoice so I want copy the field from A/R invoice to A/P invoice in PLD.

    open Administration -> Utilities -> Duplicate Layout Template  screen.
    Select the Source Document Type and Select the Destination Document Type and give a name.
    Click Add.
    Now you can find the PLD copied to the Destination Document

  • How to block the material qty to 1 while creating sales order (VA01)?

    Hi All,
    Scenario :  We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
    so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
    Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
    Kindly guide me how to proceed.
    Thanks,
    Renjith

    If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
    Regards
    Sridhar

  • Update Text in item while creating PO

    Hi,
    I need to update some text in TEXTS tab in Line item, while creating PO.
    While creating , when we enter material , qty and all mandatory fields after hitting enter, if I go to text tab , I should be able to see the text the I want.
    SAP stores texts using, TEXT id 'EKPO' and text object = po number and line item together
    I want to use the same ID and object so that SAP automatically retrieves text I stored , but I wan to know is there any exit after the PO number is generated.
    I checked the BADI also.
    The exit I am using doesn't generate PO number yet.
    The same can be achieved while changing PO item text.
    Please let me know your suggestions. Is there any other way to do it
    Thanks

    Hi Yifat,
      are you updating position long texts ?
    I think FM SAVE_TEXT should work
    Let me know
    Regards, Manuel

  • Service Text and Material PO text

    Hi All,
    We are facing problems with SAP Texts in ECC 6.0
    We have maintained some texts in Service long text and material PO text in respective masters. While creating PO we can change the Material Po Text. But when we try to edit the service long text in PO, system says it is password protected. The same is the case for material PO text while creating PR.
    Can some one highlight what is the password for changing the text or how the same can be changed.
    Regards,
    Prashant Tawde

    Hi,
    tyr this
    SPRO>MM>Purchasing>PO>Define Screen Layout at Document Level
    but it will be applicable for service Po also
    check following link also
    [http://help.sap.com/saphelp_nw04s/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm]
    Regards
    Kailas Ugale

  • Error while creating the "Year Transfer"

    the following error occurs which doing the Year transfer in SAP business one.
    Please suggest the reason and its solution.
    Error [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot change owner of object 'WTR9' or one of its child objects because the new owner 'dbo' already has an object with the same name. 'User Tables'  has occured while creating a new company

    Hi Pankaj,
    Which localization are you working on? As far as I know the year end transfer is only supported on specific localizations, like Israel. Not sure if this has changed over the last year.
    Hope it helps,
    Adele

  • Save Query - An error occurred while creating connection strings for the query

    A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

    I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

  • Problem While creating the related entity DocFlowSet

    Hi,
    i am trying to create a Business Transaction and attach it to the another transaction.
    I am creating the Transaction T1 using the factory methods and I am facing issues while creating the related entity DocFlowSet to attach T1 as a follow on document to T0.
    i am using the model DocFlowSingle and passing the parameters like.
    ObjKeyA GUID of T0
    OBJTYPEA
    OBJKEYB GUID of newly created transaction T1
    OBJTYPEB
    RELKING
    RELATEDGUID: GUID of T1
    RELATIONID GUID: creating a new 22 character GUID and then assigning it
    But still I am not able to create the related entity. Can any one please help me in resolving this.
    Thanks,
    Ravi G

    Resolved by self

  • RFQ header text in Sapscripts

    I have copied MEDRUCK sapscripts to ZMEDRUCK and I have a requirement to print some rfq header text. I have got the Text ID (A01), Text name (600000022), Text Object (EKKO).
    What is the syntax to print this header text using a INCLUDE statement ? I have to print the heading and the contents of this text object. Can I get some examples ?
    Also, the heading should not print if the text is blank.
    Thanks.
    Edited by: NewComer on Dec 27, 2007 6:06 PM

    Check these threads. U have sample code.
    Display long text in SAPScript
    Text printing in SapScript
    Regards,
    Maha

Maybe you are looking for