Copy the SP2 Portal File System and then Migrate??

Hello All,
Is it possible to copy the EP6SP2 Portal FileSystem and the SQL Database on the other host and then migrate start the migration process from this host. I mean to create the export file from this new host(where we copied the fileSystem and the DB). Because anyways we have to shut down the portal while migrating, so i think this can be done..
Any ideas.
Vaib

Hi Vaib,
> That's my thread only
Totally right, I know. I just wanted to clean up the cross post particles
> Anyway...do you know
Not really, but check out https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4e7b090-0201-0010-ada6-b9bc09c7f354 if it may help.
Hope it helps
Detlev

Similar Messages

OES11 SP2 - Linux File System and NSS Pools & Volumes

Planning to install our first OES11 SP2 server into an existing tree - the
idea is to run this new OES11 server virtualized on VMware ESXi 5.5
The existing tree has two physical NW6.5SP8 servers running eDirectory
Version 8.7.3.10b (NDS Version 10554.64). One of the existing Netware
servers is used for DHCP/DNS, File Sharing from three NSS volumes and
Groupwise 7.0.4 whilst the second server is used for FTP services and
eDirectory redundancy. Ultimately the plan is to have two virtualized OES11
SP2 server with one for file sharing and the other for making the move from
GW7 to GW2012. And we're planning to stick with NSS for file sharing on the
new OES11 SP2 server.
I've come across a couple of posts for earlier versions of OES which
recommended not to put the Linux Native OS File System and NSS storage
pools/volumes on the same hard drive. Apparently the advice was a result of
needing to allow EVMS to manage the drive which could be problemmatic.
I've read the OES11 documentation which says that "The Enterprise Volume
Management System (EVMS) has been deprecated in SLES 11, and is also
deprecated in OES 11. Novell Linux Volume Manager (NLVM) replaces EVMS for
managing NetWare partitions under Novell Storage Services (NSS) pools."
So I'm wondering if there is still a compelling requirement to keep the
Linux Native File System and NSS pools/volumes on separate hard drives or
can they both now safely co-exist on the same drive without causing
headaches or gotchas for the future?
Neil

Hi Willem,
Many thanks for the further reply.
So we can just use the VMWare setup to "split" the one physical drive into
two virtual drives (one for the OS and the second for the pools).
And I've seen posts in other forums about the need for a decent battery
backed cache module for the P410i controller so I'll make sure we get one
(probably 512Mb module + battery).
Can I ask what is the advantage of configuring each VM's virtual disk to run
on it's own virtual SCSI adapter (by setting disk1 to scsi 0:0, disk2 to
scsi 1:0, and so on)?
Cheers,
Neil
>>> On 9/5/14 at 12:56, in message
<[email protected]>,
magic31<[email protected]> wrote:
> HI Niel,
>
> xyzl;2318555 Wrote: >
>> The new installation will run on a Proliant ML350 G6 with P410i>
> controller
>> so we can use the raid capability to create two different logical drives>
> as
>> suggested.
>
> As you will be using ESXi 5.5 as host OS, it's not needed to split
> thehost server storage into two logical drives... unless that's what
> youwant in perspective for "general performance" or redundancy reasons.
> Italso depends on the options that P410i controller has.
>
> On a side note, I'm not too familiar with the P410i controller... domake
> sure you have a decent battery backed cache module installed, asthat will
> greatly help with the disk performance bit.
> If the controller can handle it and the controller can handle it, go
> forraid 10 or raid 50. That might be too big a space penalty but will
> helpwith disk performance.
>
> Once you have your VMware server up and running, you can configure
> thetwo VM's with each two or more drives attached (on for the OS,
> thesecond or others for your pools).
> I usually create a virtual disk per pool+volume set (e.g. DATAPOOL
> &DATAVOLUME on one vm virtual disk, USERPOOL & USER volume on an other
> vmvirtual disk).
> With VMware you can than also configure each VM's virtual disk to run
> onit's own virtual SCSI adapter (bij setting disk1 to scsi 0:0, disk2
> toscsi 1:0, and so on).
>
>
> xyzl;2318555 Wrote: > Do you have any suggestions for the disk space that
> should be reserved> or
>> used for the Linux Native OS File System (/boot, /swap and LVM)?
>>
>
> Here's one thread that might be of interest (there are more
> throughoutthe SLES/OES
>
forums):https://forums.novell.com/showthread...rtitioning-%28
> moving-from-NW%29
>
> I still contently follow the method I choose for back in 2008, justwith
> a little bigger sizing which now is:
>
> On a virtual disk sized 39GB:
>
> primary partition 1: 500 MB /boot , fs type ext2
> primary partition 2: 12GB / (root), fs type ext3
> primary partition 3: 3 GB swap , type swap
>
> primary partition 4: LVM VG-SYSTEM (LVM partition type 8E), takes up
> therest of the disk **
> LVM volume (lv_var): 12 GB /var , fs type ext3
> LVM volume (lv_usr-install): 7GB /usr/install, fs type ext3
> * there's still a little space left in the LVM VG, in case var needs
> toquickly be enlarged
>
> One thing that's different in here vs what I used to do: I replaced
> the/tmp mountpoint with /usr/install
>
> In /usr/install, I place all relevant install files/IOS's
> andinstallation specifics (text files) for the server in question. Keeps
> itall in one neat place imo.
>
> Cheers,
> Willem-- Knowledge Partner (voluntary sysop)
> ---
> If you find a post helpful and are logged into the web interface,
> please show your appreciation and click on the star below it.
>
Thanks!---------------------------------------------------------------------
---magi
> c31's Profile: https://forums.novell.com/member.php?userid=2303View this
> thread: https://forums.novell.com/showthread.php?t=476852

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? thank you

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Acrobat.exe
Application Version:                           11.0.7.79
Application Timestamp:                     536b812b
Fault Module Name:                          Acrobat.dll
Fault Module Version:                        11.0.7.79
Fault Module Timestamp:                  536b80ff
Exception Code:                                  c0000005
Exception Offset:                                00cbf281
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

Can I download a file in different sessions or should it be in a single session? In other words can I pause the download of a file, shutdown/restart my system and then resume download from where I left off? Or will it start from the very beginning?

If a server supports resuming downloads then the download should continue where it left off.<br />
You can test that by simple starting a large download and wait a minute or so before pausing it.<br />
Then you can close and restart Firefox and see if resuming works.
You can set the pref browser.download.manager.quitBehavior to 2 on the about:config page.<br />
That will make Firefox ask for confirmation if you want to cancel the download if you close Firefox.
See:
* http://kb.mozillazine.org/browser.download.manager.quitBehavior

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

In iPhoto, I want to copy certain photos in an event and then have the copies in another event WITHOUT removing the original photos from their original event; how to do that?

in iPhoto, I want to copy certain photos in an event and then have the copies in another event WITHOUT removing the original photos from their original event; how to do that?

The only way to do that is to export the image to a new file and then re-import it.
It's not really the intended way of working as it uses twice the disk space and is inefficient.
Use Albums instead. A Photo can be in any number of albums and use no extra disk space as it just simply references the image in the Library. Albums can be sorted any way you want - including manaually - and can have image from anywhere in the Library just by drag and drop.

Backup to file system and sbt_tape at the same time?

hello!
is it possible to do a rman backup to disk and sbt_tape at the same time (just one backup, not two)? the reason is, that i want to copy the rman backup files from the local file system via robocopy to another server (in a different building), so that i can use them for fast restores in the case of a crash.
if not, what is the recommended strategy in this case? backups should be available on tape AND the file system of a different machine.
environment: oracle 10g, windows server 2008, commvault for backup on tape
thanks for your advice.
best regards,
christian

If you manually copy backupsets out of the FRA to another location, but still accessible as "local disks", you can use the CATALOG command in RMAN to "catalog" the copies.
Thus, if you opy or move files from the FRA to /mybackups/MYDB, you would use
"CATALOG START WITH /mybackups/MYDB" or individually "CATALOG BACKUPPIECE /mybackups/MYDB/backuppiece_1" etc
Once you have moved or removed the backupsets out of the FRA, you must use
"CROSSCHECK BACKUP"
and
"DELETE EXPIRED BACKUP"
to update the RMAN repository. Else, Oracle will continue to "account" for disks pace consumed by the BackupPieces in V$FLASH_RECOVERY_AREA_USAGE and will soon "run out of space".
You would do the same for ArchiveLogs (CROSSCHECK ARCHIVELOG ALL; DELETE EXPIRED ARCHIVELOG ALL) if your ArchiveLogs go to the FRA as USE_DB_RECOVERY_FILE_DEST

Is there an easier way to transfer your iTunes library on windows to a mac than copying the library to a usb and plugging the usb into the mac and put the library in the iTunes file

is there an easier way to transfer your iTunes library on windows to a mac than copying the library to a usb and plugging the usb into the mac and put the library in the iTunes file? I recently swapped to Mac and this is how i moved the library from windows to mac and library is in tact but is there an easier way? My cousin just imported her cd's again, but it was harder for me as i have an ipod with over 150 apps and i needed to move them. i think it would be helpful if i knew of an easier way so i can help a friend move his. Thanks

The general method of use is to download a script (double-click or right-click and use Download or Save As...) to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist or sometimes the entire library.
tt2

HT2128 Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.

Does any one know how to attach a document from your mail, while you are already in your e-mail, meaning not having to look for your file first and then open the e-mail.

Luis
Good question - and one that a lot of (business) people would like solved!
Your question prompted me to do some research, and I found this workaround posted by Scott Grossberg:
His solution actually addresses a second problem too - how to attach a document when replying to an email message. In your case you may not need to consider the "reply" aspect - but if not right now, it'll come in useful someday!
I've pasted it verbatim - if it works for you (it does for me) then all credit goes to Scott for solving the problem. There's just one thing I'd add to his solution: you will probably want to rename the message, as by default Goodreader gives it the Subject line: Mail with GoodReader attachments.
THE GOODREADER OPTION
1. CREATE the document you want to send.
2. SAVE it to GoodReader (this will require you to buy and install the app).
3. Go to your email and OPEN the email thread to which you want to Reply and attach your file.
4. COMPOSE your Reply.
5. DOUBLE TAP the message.
6. TAP SELECT ALL. This will copy the entire email thread.
7. OPEN GOODREADER on the iPad and go to the file you want to send as part of your Reply.
8. At the bottom of the GoodReader screen you will see an EXPORT icon (it looks like a rectangle with an arrow pointing to the right).
9. TAP the Export button.
10. TAP EMAIL FILE. Depending on your needs, tap either SEND FILE “AS IS” or “FLATTEN ANNOTATIONS.” This will open a compose message screen with the chosen document already attached.
11. TAP in the body of the email screen. TAP PASTE. This will place your composed Reply and the prior email thread into the message.
12. ENTER the Recipients’ names in the TO: field of your message.
13. SEND your email Reply.
The modified version (= when composing a new message rather than a reply):
1 Make sure that the doc you want to attach is saved in GoodReader
2 In the message you are composing, double tap, select all, and then copy.
3 Open GoodReader and select the file you want to attach
4 Select the export button at the bottom of screen
5 Select e-mail file
6 Position cursor in body of the email message, tap and paste. You may want to delete the "sent from GoodReader" text that precedes the attachment.
7 Rename your message (as by default it will be Mail with GoodReader attachments)
8 Add the recipient's address in the To field.
Hope this helps! All thanks to Scott for this workaround.

I can't get my computer to boot up. The screen is white with a file folder and then at ? in the middle

The screen is white with a file folder and then at ? in the middle

Before declaring that the disk is dead (which is a common cause for what you are seeing), try the steps outlined in this article:
http://support.apple.com/kb/TS2570
This article also has some troubleshooting steps you can try:
http://support.apple.com/kb/ts1417
If you don't have your original system disks, you can boot into single user mode folloing these instructions:
http://support.apple.com/kb/ht1492
and then following the directions for running the fsck command in the second article I list above.
I would try these things before giving up and assuming that the disk is dead. The flashing question mark indicates that a valid boot disk cannot be found. One cause for this is that the disk has experienced hardware failure. However another cause could be that the system and boot files on that disk are somehow damaged (perhaps from a power surge or an improper shutdown of the computer) and in some cases the above repair steps can restore them to working condition.

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

How to copy the photo with file name at window 7 and search specific one in iphone 4s?

Clendenen02 wrote:
2) It would be equally helpful if there was something that would take the name of the picture file and spotlight comment, copy and paste it to a movie file's comments with the same name but obviously has different extention. For an example
In a Pictures folder
Name: Dark Knight, The.jpeg       Comment: (2008) Genre: Action...             <- copy comment
In a Movie Folder
Name: Dark Knight, The.m4v       Comment:                                               <- paste
and do this for all 700 files
This Bash script will do it.
Edit "PicDir" and "MovDir" to the location of your Folders
(Note: The comment is written to the m4v file using xattr, so the Spotlight comment field appears blank in Finder, but the comment metadata is still indexed by Spotlight (If you add a Spotlight comment from Finder, it is stored both as an extended attribute and in a .DS_Store file)
#!/bin/bash
PicDir=$HOME/Desktop/Pictures
MovDir=$HOME/Desktop/Movies
for f in $PicDir/*
do
     if [ ! -d "$f" -a "${f##*.}" == "jpeg" ]; then
          comment=$(mdls -raw -name kMDItemFinderComment "$f")
          if [[ $comment != "(null)" ]]; then
               picname=${f##*/}
               movname=${picname%.*}.m4v
               if [ -e "$MovDir"/$movname ]; then
                     xattr -w com.apple.metadata:kMDItemFinderComment "\"$comment\"" "$MovDir"/$movname
               fi
          fi
     fi
done

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom new document in order to open one. How can i have directly a new document when i click on pages icon

On my mac when i click on pages, a new document doesn't open instantly but a window with my files open and then have to click on the left bottom < new document> in order to open one. How can i have directly a new document when i click on pages icon

How to open an existing Pages document?
Click Pages icon in the Dock to launch Pages.
When Pages is open, click File menu in the Pages menu bar.
Select “Open”.
When the select document dialog box opens up, highlight/select the document and click “Open”
at the bottom right corner of the dialog box.
s
https://support.apple.com/kb/PH15304?locale=en_US

How to read two text files using the Read from spreadsheet.vi and then plot it

I need to read two text files using the read from spreadsheet function and then plot these files over time.
The file with the .res extention is the RMS values (dt and df) and the second file contains the amplitude of a frequency spectrum.
I really appreciate any help..thanks
Attachments:
RMS.txt ‏1 KB
FREQUENCY.txt ‏1 KB

From NI Example Finder:
Write to Text File.vi
Read from Text File.vi
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

Copy the SP2 Portal File System and then Migrate??

Similar Messages

Maybe you are looking for