Copy the standard cube
Hi All,
Can any one tell me what is the best way to copy the standard business content cube with all of it's underlying objects such as update rules, queries, structures, variables, etc. I am planning to make a copy of the standard cube as it is with a custom name.
Any help will be greatly appreciated.
Thanks
Hi Saritha,
You can copy the cube and update rules.
When you right click to create a cube, you could use the template as the custom cube and hence copy it. Similarly while creation of Update Rules, you can do the same way.
Hope it helps
Regards
GPK.
Similar Messages
-
COPY THE STANDARD SAP MODULE POOL PROGRAM
HOW I CAN COPY THE STANDARD SAP MODULE POOL PROGRAM ((INCLUDING SCREENS) INTO Z REPORT?
Hi,
Go to transactionSE38 ABAP Editor.Type the program name.Click copy.It will ask whether you want copy documentation,screens,etc.,
Check mark it. -
Proceedure to copy the standard BAPI into ZBAPI
Hi Gurus..
I found the standard BAPI and I want to copy the standard BAPI into ZBAPI(for my company purpose) and use it in SAP xMII.
Please give the steps for copying.
Thanks
R MHi,
To copy the standard BAPI into ZBAPI.
check this link:
how to copy BAPI
How to Copy standard BAPI to ZBAPI....
Regards
Adil -
Copy the standard sapsxcript form
i want to copy the standard sapsxcript form. how should i go about it.
plz help.hi.
1. goto se71.
2. from menu you have an option to copy form from client.
3. You need to copy from client 000 of standard form.
(or)
Go to SE71. Type the std form.
Goto >Utilitie>Copy from Client-->Check Oriiginal Language.
It will ask for the New form name give it and save it.
Cheers
Alfred
Reward points for helpful answers -
Start conditions not copied when copying the standard WF
Hi
I have to copy the standard WF WS10400002 into a custom one having same start conditions
but only with an additional step.
but the start conditions are not copied on doing so.
and when trying to create the start conditions similar to the original one
i dont find the container element Gross Amount(USD) in the copied one
How can i resolve my issue , what else do i need to take care when copying the standard WF.
Please suggest.
Thanks in advanceHi Raj
The start condition defined in the std WF is
Gross amount(USD) < 9,999.00
and the in the container varaibles that i can see while defining the start conditions there are two varaibles for gross amount
they are
->EC Confirmation goods
->Gross amount Gross Confirmation Amount in Document Currency
->Gross amount(USD) Gross Confirmation Amount in Document Currency (Currency:USD).
and the BO BUS2203 has only Gross amount in the below format
ProcConfirmationEC.GrossAmount Gross Confirmation Amount in Document Currency
The std BO doesnt have Gross amount(USD)
Copied WF
In the container variables i can see only
->EC Confirmation goods
->Gross amount Gross Confirmation Amount in Document Currency
So i dont have the variable Gross amount(USD) to use it as in the std WF.
Please suggest. -
How to install the standard Cube 0PM_C09 in the Business content in BW ?
Hi ,
Experts,
Standard Cube *0PM_C09 is not available in the Cube.
Standard Cube 0PM_C09 is not exist int the Business content.
Suggest me what to do !!!!!!!!!!!!!!
Thanx.
AsitHi Asit,
Most probably you need to update the BI_CONT component in your system via SPAM.
Go for the latest SP available.
Regards,
Srikishan -
Is it possible to copy the standard profile
Hi,
Its possible to copy the sap standard profile SAP_ALL, SAP_NEW and the need to edit that copied profile,
Is its possible means kindly provide me the steps.
[email protected]
Thanks and regards,
KishooreYes. There are several 3rd party applications available both free and paid. I personally use Senuti-has worked excellent.
-
I am trying to copy the standard fm prgn_profile_name_get
hi,
any body can help me to copy the prgn_profile_name_get function module in to the zfunction module. it is giving the errors 'You can only use LIKE and TYPE to specify types in rfc' how to solve this problem please help me.You can use EXEC with SELECT like this
for that you need to use either of the two approaches
1. Create temporary table prior to EXEC call with same structure as EXEC output
Then use
INSERT INTO #TempTable
EXEC [dbo].[NA_WEB_Application_Availibility]
@InitialDate = '2014-07-07 00:00:00.000',
@FinalDate = '2014-07-07 05:00:00.000'
2. If you want table to be created on the fly then use this
SELECT * INTO #TempTable
FROM OPENROWSET('SQLOLEDB','Data Source=Server_name;Trusted_Connection=yes;
Integrated Security=SSPI','EXEC [dbo].[NA_WEB_Application_Availibility] @InitialDate = ''2014-07-07 00:00:00.000'', @FinalDate = ''2014-07-07 05:00:00.000'')'
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Regarding copying the standard program
HI Everyone,
I am copying standard ri_order_operation_list program into custom z program as my requirement is to add some addditional fields in selection criteria and in the layout . standard program makes use of fill select option and select method of the class
CL_IHREP_ORDER_OPERATION_LIST so for additional selection field how i can place filter criteria please provide me inputs for this .Hi,
I'm not sure if I get your problem right away but if you just need to add some selections to the selection screen of Program RI_ORDER_OPERATION_LIST, you just have to copy include I_ORDER_OPERATION_LIST_SEL to your own z* include and add the selection parameters you want. If this is not the result you're looking for, please explain it more detailed.
Regards
Nicola -
Is it possible to copy a Standard Program along with the enhancements?
Hi Friends,
I need to copy the program RMCE0400 (Transaction: MC$K) and modify the selection screen and select queries based on the select options.
I copied the standard program to a Z Program but the enhancements were not copied automatically.
So i copied the codes in those enhancements and pasted them in the Z Program.
But it does not replicate the selection screen as well as the output of the standard program.
Can you tell me whether there is any other way to incorporate the codes in the enhancements of the standard program to the Z Program?
Is it possible to copy the enhancements?
I can use the enhancements to enhance the standard program, but the user wants to create a new T-Code with the copied and modified program.
So can anyone let me know if there is any way to do so?
Edited by: Arunkumar Balasubramaniam on Jun 11, 2010 11:42 AMYes per this
http://download.p4c.philips.com/files/p/ppx2480_eu/ppx2480_eu_dfu_eng.pdf
The device has
Video connection .................................Mini-HDMI socket
Thus you will need an HDMI to min HDMI adopter -
Regarding Copying the structure
Hi All,
I have designed a custom cube based on standard cube. Now i have to design the queries based on that InfoCube. In the standard Cube, we have a strcuture which I want in the query designer for the custom cube. How to get that structure into that InfoCube??
Regards
JayNo, you are correct. A global structure is tied to a cube, not available for all cubes. But if you copy even one query from Cube 1 to Cube 2, even if it is not using the structure, the structure and other global elements will get copied too. Open a query for cube 2 and you will find then with _1 added on the left hand side.
Hope this helps... -
Modified Standard Cube during upgradation :
Hi,
I have a standard cube 0PA_C01 and modifing it to add few info objects as characteristics.
What will happen to this Std. cube, if we go for upgradation from BI 7.0 in future ?
Or do i need to always make a copy of such Std. cube as Z and do the modification to it ?
Whats the best practice ?
Would appreciate your views about this.
Best Regards,
Shakeel.Hi,
It is always a good practive to make copy of the standard cube to Z and make changes to them. In future if we get any probelm SAP wont support for that. Make a copy of the standard cube to Z.
Khaja -
Addint new field to the standard sapscript form.
FOR SALES INVOICE DOCUMENT FORM PRINTING
TRANSACTION CODE: VF01
OUTPUT TYPE : FJCI
PROGRAM NAME: RVADAUS1
SAPSCRIPT FORM NAME: SD_EXPORT_FJCI
ENTRY ROUTINE: ENTRY_FJCI.
STRUCTURE USED FOR THIS OUTPUT TYPE = V55EFJCI
THE QUERY IS AS FOLLOWS:
I WANT TO ADD DATA MODE OF TRANSPORT FROM THE INVOICE DOCUMENT. THE TABLE AND FIELD IS T618-BEZEI.
SO I COPIED THE STANDARD FORM TO ZSD_EXPORT_FJCI AND THE STANDARD PROGRAM TO ZRVADAUS1.
I SUCCESSFULLY FETCHED THAT FIELD DATA.
I APPEND THE STRUCTURE 'ZAV55EFJCI' TO ADD THE ADDITIONAL T618-BEZEI FIELD.
AND WRITE MY SELECT QUERY IN THE ENTRY_FJCI FORM ROUTINE.
THE CODE IS AS FOLLOWS:
data: begin of it_mode_of_tp occurs 1,
bezei type t618t-bezei,
end of it_mode_of_tp.
select a~bezei as zzbezei into table it_mode_of_tp from t618t as a
inner join
eikp as b on aexpvz = bexpvz and aland1 = baland inner join vbrk as
c on bexnum = cexnum
where cvbeln = nast-objky and aspras = nast-spras .
loop at it_mode_of_tp.
v55efjci-zzbezei = it_mode_of_tp-bezei.
endloop.
BUT THE DATA FOR THAT IS NOT GETTING DISPLAYED.
THIS WAS THE FIRST METHOD I FOLLOWD.
THE SECOND METHOD I DID WAS AS FOLLOWS:
FORM ENTRY_FJCI.
PERFORM PROCESSING.
ENDFORM
FORM PROCESSING.
PERFORM PRINT_DOCUMENT.
ENDFORM.
FORM PRINT_DOCUMENT.
CALL FUNCTION 'RV_EXPORT_DOCUMENT_PRINT'
ENDFORM.
IN THIS FUNCTION THE DATA IS GETTING FETCHED FROM THE DATABASE TABLES AND STORED IN THE STRUCURE V55EFJCI.
SO I COPIED THAT FUNCTION.
IN THIS FUNCTION , THEIR IS A INCLUDE PROGRAM 'LV55EF11' FOR FETCHING DATA FOR ENTRY_FJCI FORM ROUTINE.
I COPIED THAT PROGRAM CODE , AND CREATED MY OWN INCLUDE PROGRAM (WHICH I AM STORING IT IN ANOTHER Z PACKAGE.)
AND WRITTEN MY ABOVE CODE IN THAT PROGRAM. BUT WHEN I DO THIS, NOITHING GETS DISPLAYED , EVEN THE PREVIOUSLY COMING DATA ALSO NOT GETTING DISPLAYED.
HOW SHOULD I PROCEED.you said you copied layout(form) SD_EXPORT_FJCI to ZSD_EXPORT_FJCI,
you updated program to fetch datat & populate v55efjci-zzbezei field.
Now
- you need to modify layout(form) ZSD_EXPORT_FJCI via SE71 to insert your field in one of the windows where it has to be printed (sap script knowledge is required here).
- you need to either modify SAP output type FJCI to use your program/layout(form) or you need to create your own output type and assign your form/program to it, and in addition to that if you define your own output type - yo have to add it to output determination procedure, to access sequences, add condition records to condition table... so it's picked up by the invoice. -
How to copy the standarad function module
hi,
i wants to copy the standard function module which are not rfc enabled. for that one i copied standard one and modified the attributes to rfc enabled. but it was giving the errors "You can only use LIKE and TYPE to specify types in RFC",
how can i solve my problem. pls help me.Hi mukka,
1. In that FM, while after copying to Z,
2. there is a second parameter in IMPORT
WITH_TEXT
3. in the column of Associated type,
it will be blank.
give some data element like CHAR30
and also give type
4. Then it will not give the error.
regards,
amit m. -
Problem in copying a standard maintenance view
Hi to all experts,
My requirement is to make an exact replica of the standard view V_T71ADM23 . I have copied the view into a custom z view and in the table maintenance generator created a function module and provided a screen . but the screens in both standard and custom view which i have generated is different. So i copied the standard function group in the table maintenance generator of the standard view into a zfunction group and assigned to the custom view . If i do that im getting errors like
View C_V_T71ADM21 has no active version and no entry in the control directory
View VT71ADM19 has no active version and no entry in the control directory
View VT71ADM20 has no active version and no entry in the control directory
View VT71ADM21 has no active version and no entry in the control directory
View VT71ADM22 has no active version and no entry in the control directory
View VT71ADM23 has no active version and no entry in the control directoryHi venkat ,
i followed your procedure but it is the same . Im getting different screens for standard and one which i copied . what could be the reason
after going into sm30 click maintain entries
give compensation area and
guideline matrix
hit enter
i tried with both standard and custom
the screens are different in standard and custom some fields are missing in the custom view which i copied
Please help . greatly appreciated .....
Maybe you are looking for
-
Find my iPhone. Is this possible?
Is it that possible that, while locating an iPhone, Find my iPhone would show the location far away from the current location, if the phone wasn't in that location at all? I tried logging in to Find my iPhone and after the login finished, it showed t
-
Can someone help with transfer to iPod
I have several home movies that I converted to mpeg4 with Handbrake but only one of them will transfer to my iPod. I keep getting a prompt that says it won't play on the iPod. It plays beautifully in iTunes. Can someone help? Thanks, Judy
-
Dear all, can someone explain what is the MDI mean just this three letter (MDI) thanks
-
How do I restore System Roots Certificates. They were all accidentally deleted
Someone was working on my wife's mac, and they for some inexplicable reason deleted all of the certificates in the System Roots keychain. I can't import them from my mac, because I can't import to the System Roots keychain.
-
I hope I am in the right place here: but I find this forum stuff all too confusing took an hour to get here; ANYHOW CS5 Photoshop was working perfectly well until right now when suddenly it will not open at all!! no error messages, no nothing!!