Copy to device

Hallo ! Mein Pocketbook 912 ist per USB am PC angeschlossen und wird dort im Explorer angezeigt. Nun öffne ich Digital Edition auf meinem PC und öffne ein geliehenes Buch. Als nächstes möchte ich dieses Buch auf mein Pocketbook kopieren. Das wird aber in Digital Edition nicht erkannt ! Was tun ? Außerhalb von Digital Edition kann ich das geliehene Buch auf das Pocketbook kopieren - dort dann aber nicht öffnen !!!

Check "Writing Device Drivers" manual posted at
http://soldc.sun.com/developer/support/driver/IO_kit/PC
.html.Thanks for the pointer. Two remaining issues, however:
1. When you post a URL, the forum automaticaly tries to make a link out of it. Unfortunately, it is too stupid to figure out not to include a trailing "." :-/
So your original link is only clickable if you have a trailing space. Eg:
http://soldc.sun.com/developer/support/driver/IO_kit/PCI.html .
2. I presume you are referring to the
"Mapping Device or Kernel Memory" section of WDD:
http://docs.sun.com/ab2/coll.45.10/DRIVER/@Ab2PageView/14022
But that seems to focus on making memory available to USERland.
Could you give me a more specific reference to mapping device space for KERNEL use, please?

Similar Messages

VS2008 : post build event - to copy to device's FTP server

Hi,
My CE device had built-in FTP server.
I wish to use post build event to copy the debug content to the FTP server on the CE device.
i was able to copy the files to local temp file using: xcopy "$(TargetDir)*.*" "c:\temp" /E /Y /C
my question-
is there any way coping the files directly to the FTP ?
thanks,
Moti
מוטי ג.

hi,
i used that command:
xcopy "$(TargetDir)*.*" "ftp://192.168.100.2" /E /Y /C
and i got that error:
Error 1
The command "xcopy "C:\temp\HMI CE\HMI CE\bin\Debug\*.*" "ftp://192.168.100.2" /E /Y /C" exited with code 4.
HMI CE
i have the feeling i'm declaring the target in a wrong way, but don't know how to set it correctly.
Moti.
מוטי ג.

DB Copy: raw devices - datafiles

Hello,
I searched the MaxDB documentation etc but I didn't find any answer yet.
Is it possible to perform a system copy of a MaxDB instance on raw devices
and recover it on the same HW architecture but with data files?
And is it also possible to restore log backups from the raw-device instance
on the datafile instance during this system copy?
Regards,
Mark

Mark,
the MaxDB data format of pages on raw devices and in files is identical, so it's no problem to restore a backup on the same machine with a different volume configuration. You can restore data and log backups independent of the physical format of the original volumes.
regards,
Henrik

Bulk copy to device (DMA) memory

I'm looking for the eqivalent of bcopy, or ddi_copyout/copyin, to DEVICE memory.
bcopy only works on kernel memory
ddi_copyout only works on kernel/user memory
The only officially supported way to write to DMA/device memory seems to be ddi_putX()/ddi_rep_putX()
Isnt there something else I'm missing, that can do efficient bulk copies?
This is depressing, from an optimization standpoint.

Check "Writing Device Drivers" manual posted at
http://soldc.sun.com/developer/support/driver/IO_kit/PC
.html.Thanks for the pointer. Two remaining issues, however:
1. When you post a URL, the forum automaticaly tries to make a link out of it. Unfortunately, it is too stupid to figure out not to include a trailing "." :-/
So your original link is only clickable if you have a trailing space. Eg:
http://soldc.sun.com/developer/support/driver/IO_kit/PCI.html .
2. I presume you are referring to the
"Mapping Device or Kernel Memory" section of WDD:
http://docs.sun.com/ab2/coll.45.10/DRIVER/@Ab2PageView/14022
But that seems to focus on making memory available to USERland.
Could you give me a more specific reference to mapping device space for KERNEL use, please?

Podcasts disappear when copying to device/folder

If I highlight a file and drag or copy to my SD card sometimes but not always the file will say it has been deleted. The exclamation mark says the original file could not be found. The file is lost.

1. Do you have adequate cache space? Is it on C drive, or a dedicated drive or partition? If it is nearly full that could cause problems.
        - 35 GB available on C: using a centralized cache in default location
2. Compact the cache. That will get rid of all unmached files and thumbnails, and reduce its size.
        - I have no option in Bridge to compact the cache that I can find - either in the preferences or from the cache menu (I am using Bridge CS2 with Photoshop CS2)
3. Delete temp file with a product like cclean
        - What temp file? I have used CCleaner on numerrous occassions for cleaning up but only recall some files located in a   \CameraRaw\cache location
4. Go to a folder that has problems. Then go to Tools/cache/purge cache for xxx folder
        - Did this many times - does not fix problem.
5. Close program then restart and see if problems are still there in xxx folder
         - same as #4 - opened and closed Bridge and Photoshop many times trying to purge and rebuild. still broken.
6. Open Windows Explorer and look at thumbnails. Look at contents of each folder closely and see if any do not have a thumbnail. That would indicate you have corrupted files there or bad suffix. Figure out what it is and fix or delete
     - The files are all okay - Windows Explorer displays thumbnails and I have no problem using Adobe Lightroom and working on any of the files.

Copier-Scanner Device Sends PDF. Acrobat X- The entire PDF is Gray

Installing Acrobat reader 9 and the scanner sent PDF's can be read.
Help..
BTW: Other PDF's (such as a downloaded I-9) works fine in Acrobat X.

Thank you for the suggestion. I will check the preferences.
I was saying that if we downgrade the reader (leaving Acrobat Std X) only to version 9 - our problem is solved.

E51 can not copy music to device with Ovi Suite

I have music files on my computer and I'm trying to copy them to my phone using Ovi Suite.
According to Ovi Suite's instructions, to do this manually I have to choose the music file and select Tools - Copy to device. But this option can not be chosen after selecting a music file (it stays gray) Why is that?
The E51 should have enough memory left for the music, but it does not have a memory card. Is that the problem?

Hi Seimussier,
Yes you are right, you cant copy music files to the phone memory through the OVi suite. It need a memory card for that purpose.
In case if you want an alternative you can go through your explorer, open your device memory and paste your music files.
Once you finish transfering your music files, disconnect your device, open your music player and update your Music library. Now you should be able to see your music files.
Note: Through this method you can only transfer your music files, but cant convert the same in case if it is not supported by the phone
Regards
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

ABAP list report wont print on Z device type with Z format

Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

No comments

All in One Printer/Scanner/Copier/Fax Recommendations

Hi,
I'm looking to purchase an all in one printer/scanner/copier/fax device. I was wondering what recommendations other people have. The main purpose would be to print photos, scan photos and some small business office printing. Note, a fax would be nice, but is not absolutely neccessary.
Scanning photos would be important, since I plan to scan our family's photo albums into iPhoto.
Also, is there a printer than can communicate with the Mini using bluetooth? If so , does it work well?
Since I have limited desk space, size would be an issue (smaller the better).
Looking to spend about $200, slightly more if the cost justifies itself. Less is always better.
Thanks in advance!

The Brother MFC-420cn
http://www.brother-usa.com/MFC/ModelDetail.aspx?ProductID=MFC420CN
does everything you ask for less than $100 -- except bluetooth.
The Pluses: Good Mac software. Cheap ink. Networkable.
The construction is flimsy plastic, but if you are gentle it will hold up.
Definitely small footprint.
Paper path is 180 degrees, which is not my preference.
Personally, I prefer Epson all-in-ones. Also good Mac software and 80 degree paper path for less jamming. Exceptional scan quality.
http://www.epson.com/cgi-bin/Store/ProductCategory.jsp?oid=-8182

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

How to use the Itunes to transfer files to my device? by the way it is The worst., how to use the Itunes to transfer files to my device? by the way it is The worst.

my Opinion is that the Itunes is unfriendly it is the worst program to deal with, why can't it be easy to transfer files to and from my device by drag and drop or by a simple way like copy to device. even a trained monky can do a better program to do this.

Hi. If you are really lucky the folder containing your media is protected by Volume Shadow Copy and it might be possible to restore the structure. That said 100Gb of data is a pretty big chunk so the change may have been ignored as too big to bother archiving. I'm sorry I don't have any tips to offer on this Windows feature.
iTunes only reorganizes data inside the designated media folder. And then only if you let it. The default install of iTunes will create a new empty folder for media to go to and if you had kept your media separate in some other location to import to iTunes then iTunes would have created fresh copies leaving the originals in their folder layouts. iTunes does not record the paths files were at when they were imported, unless they are outside the media folder and iTunes is not making copies, or they are inside the media folder but iTunes is not organizing them. There is no way within iTunes to undo such reorganization. Normally restoring a backup would take care of the problem but it seems clear that you don't have one.
iTunes has specific rules for structuring media, generally along the lines of <Media Folder>\<Media Kind>\<Artist>\<Album>\## <Name>.<Ext>. I have scripts that can be used/modified to impose a different structure, but that only works if the data to drive the organization is present in the tags. From the sound of things you have lost selections of media (effectively Playlists) that were identified by the location rather than the metadata. I can't offhand think of a way to retrieve that information.
tt2

DSD: No Tour for Device

Hi Experts
I am working on DSD
All backend configurations have been done. Data is coming in the connector tables.
We are facing 2 problems for the data which is coming on the middleware(MI Server) from the connector tables
1. Data in all Sync Bou2019s except in DSD_REGION is in waiting status(I-Waiting)
2. Data being sent to DSD_REGION shows
u201CSYNCRONIZER_CONTROL_DISABLEDu201D
As data is not coming properly on the MI Server we are getting the following message on the MI AWT Client
u201CNo tour for deviceu201D
Whereas, on the DSD Administrator console all the data(Tour id, driver, vehicle) is coming for the device.
What can be the problem for the data which is coming in waiting state? Any other reason for the message showing u201CNo tour for deviceu201D?
Regards,
Ashima Sharma
Edited by: Ashima Sharma on Jun 13, 2008 10:49 AM

Hi,
1. When I look at the transaction /DSD/ME_CPT and try to select the device I'm having some trouble to determine exactly the device I want to associate. For example:
Firstly copy your device id from your AWT client and go to transaction Merep_pd
Select TAb Mobile ID
Press F4 at Mobile ID
paste ur device id at Device GUID and press enter and select mobile id with MDS component and r/3 user assigned to it.
this is the correct mobile id u need to assign at connector cockpit.
Download MDSD monitoring guide from SMP....it will help u a lot
Regards,
Akhil

Creating a device type for Chinese Simplified

Hello Gurus ,
i have a question regarding Device types. We recently bought a Chinese Simplified Font Flash USB and we installed it on an HP Laserjet 4515. In windows mode the printer is printing chinese correctly . But in SAP i didnt found how to make it print. I was searching for OSS notes but i couldnt find something relevant.
So i copied the device type for the printer , which is HPLJ4000 and i set the character set to 8416 which is (Printer HP LaserJet PCL-5 series Simplified Chin) .
Unfortunately this didnt work , i also tried other char sets but the problem remains . Did anyone had this problem before ?
Best thanks for an idea !
regards,
david

I'm not really sure if you can transport it... but you can export it to file and imported in the target system
SPAD -> Full Administration -> Device Type -> select the device -> Edit -> Transfer -> Export.... same in the target system but Import.
Hope that help.
Regards
Juan

Is it possible to view books purchased in iBooks on an Android device

Hi, I've bought my first book within iBooks, is it possible to view it using an Android device e-reader (I use Aldiko, but could use any other)? I get a technical failure when I try and import which I suspect is caused by DRM kicking in, having previously imported ePub titles without any problems.
Also, are there any good alternatives to the iBooks store - e.g. which allow purchases which can be copied between devices in this way?
Thanks in advance
Matt

vinnyvg wrote:
If I produce an eBook using iBA to offer free ( and DRM free ) from my websites.... can they be downloaded and used by Android phones/tablets??
Only the iPad can read the .ibooks format produced by iBA. If you want to use the pdf option, then anything can read it.

MDSD: No tour for device

Hi Folks,
We are facing some trouble when synchronizing, in this case, downloading the tour information to the device.
I believe we have everything configured correctly. We also have installed DSD Administration Console. Our test is that we have created a business scenario, with sales order, delivery, shipment, and finally we have checked out.
With the check out executed, we saw that an IDOC was generated for the message type: /DSD/HH_CONTROL
After that, at the DSD Administration Console, Sync. Status Overview, we can see the following information:
Device Tour No. Driver Vehicle ID Status
GLI V0000000056 CPB1000500 TRUCK02 P - Info: Device notified of tour readiness
Download Status we have:
Tour data ready: S - Info: Successfully processed for download
Pricing data readiness: S - Info: Successfully processed for download
The device is correctly registered. We can see the device at the device maintenance, and we have configured /DSD/ME_CPT for the user GLI and selected the corresponding device plus assigned the driver and vehicle to it. When we synchronize we are getting on the device that, no tour was found for the device. But we can see that the tour is available for the device, but somehow the device can't get it.
I have several questions about this:
1. When I look at the transaction /DSD/ME_CPT and try to select the device I'm having some trouble to determine exactly the device I want to associate. For example:
When I hit the matchcode I get Mobile ID's, User, MSD_NAME, but at the Device Maintenance From the MI, there is no Mobile ID, instead there are Device Name, Device ID and USER. But USER wouldn't be enough if I have several devices associated to a user. Under this scenario the way I'm identifying the device is just selecting random mobile ID associated with user and MDS_Name and after this, compare device ID to assure that I'm selecting the correct one.
Is there an easier way, or am I missing something about device assignments?
2. What does the synchronization checks to determine what should be sent to what device? The device ID? I ask this because there also a field called Channel ID.
I would really appreciate any help you can give me to guide me through the synchronization problem.
Regards,
Gilberto Li
Edited by: Gilberto Li on Mar 3, 2010 9:41 PM

Hi,
1. When I look at the transaction /DSD/ME_CPT and try to select the device I'm having some trouble to determine exactly the device I want to associate. For example:
Firstly copy your device id from your AWT client and go to transaction Merep_pd
Select TAb Mobile ID
Press F4 at Mobile ID
paste ur device id at Device GUID and press enter and select mobile id with MDS component and r/3 user assigned to it.
this is the correct mobile id u need to assign at connector cockpit.
Download MDSD monitoring guide from SMP....it will help u a lot
Regards,
Akhil

Copy to device

Similar Messages

Maybe you are looking for