Copy to my calendar missing after migration Exchange 2010-2013

Hi there,
We have migrated our Exchangeserver from Exchange 2003 too 2010 and then too 2013.
In Outlook 2007 (with Exchange 2003 and later 2010) we had a button in the 'New appointment window' called 'Copy to my Calander' When we made an appointment in a Public Calander.
After migrating to Exchange 2013 the button is missing, but we're still using the Public folder (Calander).
Is there a solution for this?

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

Cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2

Hi,
We are planning cross forest migration Exchange 2010 SP2 to Exchange 2010 SP2.
Requesting you to please help us out for below scenario.
Source Exchange 2010 SP2:- abc.com
2AD, 2CAS & 2 MBX servers
Database:- 4
Total Users :- 3500
Accepted Domains :- 8
Total Data:- 5TB +
Target Exchange 2010 SP2:- xyz.com
Resource allocated same as above.
Now we have to migrate users along with data to target forest xyz.com keeping both setup live, as moving 5TB + data will be a ongoing process and the same will take some time.
With the guidelines mentioned in
http://careexchange.in/cross-forest-migration-guide-exchange-2010-to-exchange-2010/#comment-14203 we are able to migrate test users along with data, but after migration the migrated user is not able to connect through MS Outlook even not able to login into
OWA. It gives error “The Outlook Web App address
https://mail.abc.com/owa is out of date.”
Kindly let us know how to solve this issue.
Kindly let me know if you want any more information from our end.
Thanks in advance.
Thanks and Regards, Shashank Kudi

Hi Shashank,
Do you have certificates properly installed and configured in the target Exchange?
If not, Please configure certificate and import the certificate to the trusted root CA if you are using internal CA cert.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Migrate Exchange 2010 public folders cross forests

Hi,
Due to some Exchange and Active Directory issues (with remnants of old Ex 2003 server), we are going to migrate Exchange 2010 Mailboxes and public folders to a new Exchange 2010 Sp3 server, which is created in a new AD forest.
One thing we still have to decide, which is how to migrate public folders.
Apparently there are 2 ways:
1. To export PF data to PST and then import using Outlook in destination Exchange server
2. To use interorg replication tool to replicate PFs cross forest in target Exchange Server.
I would really appreciate if someone suggests which one is best. We have around 100GB of PF data.
Also, should we migrate Public Folders first? We think that we should move Mailboxes first.
Thanks in anticipation.
Regards, David Johnson

Hi,
Yes, when we decide to migrate from one Exchange server to another server, we need to move mailbox first.
About migrating public folders, both of these two solutions are available, I think that the first one is simpler.
Here is a similar thread for your reference.
http://social.technet.microsoft.com/Forums/exchange/en-US/e3a23acd-efd2-4e51-bf4d-cb94b4b88a9f/exchange-2010-public-folder-cross-forest-replication-tool?forum=exchange2010
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Exchange 2010-2013 co-existence - need for OWA/ActiveSync legacy namespace?

Hi all
Straight to the point: how to I update units that were set up manually with Exchange ActiveSync (pointing to owa.domain.com) with a temporary legacy namespace owa-legacy.domain.com, and then back to owa.domain.com?
Background: I did a test run of migrating a single-server installation from Exchange 2010 to Exchange 2013. As expected, after moving a user's mailbox to the new Exchange 2013 CAS with owa.domain.com still pointing to Exchange 2010, the user
was unable to log in at the Exchange 2010 OWA, and the ActiveSync unit was unable to fetch mail.
So I created a legacy namespace (owa-legacy.domain.com) and set this as the URL on the Exchange 2010 server, and waited for it to populate, then switched owa.domain.com to Exchange 2013. But the URL on ActiveSync units was still pointing to the wrong URL.
What did I overlook or not understand, or am I making migration more complex than needed?
Thanks for reading and best regards
/Maurice
PS: here were some of my pre-post readings:
Exchange 2003-2013 co-existence, even better
Exchange 2003-2013 co-existence,
Exchange 2010-2013 co-existence slides,
Upgrading ActiveSync to Exchange 2010,

Hi
Is that because External URL on Internet facing CAS servers were set to Blank，and Users are not able to get Updated URL
Please try to Add the External URL and made sure that all the required configurations are set Appropriately.
Also I suggest posting on Exchange ActiveSync Forum as well
http://social.technet.microsoft.com/Forums/en-US/home?forum=exchangesvrmobility
Cheers
If you have any feedback on our support, please click
here
Zi Feng
TechNet Community Support

Exchange 2010/2013 coexistence: OWA proxy not working properly ":-( Something went wrong"

Hi
Exchange 2010 users are NOT able to connect to their mailboxes when they go through exchange 2013 OWA address. We get a message that says following ---> "Something went wrong"
Following is our URL. The address is pointing to 2013 CAS loadbalancer VIP. Outlook anywhere is working fine. What is going on?
Important: All my exchange 2010 / 2013 URIs are the same as suggested by Microsoft (Owa, ecp, activesync, ews, autodiscover): --> mail.domain.com/XXX

Hello Rawa,
Can you log on Exchange 2010 OWA using its localhost address?
Please make sure the intenralurl value is set to Exchange 2010’s local host name and set the Externalurl to Null.
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Outlook client requirements and Exchange 2010/2013 coexistence

Good morning!
A question regarding Exchange 2010/2013 coexistence and the Outlook client requirement. I am upgrading and about to install Exhange 2013 into an existing Exchange 2010 Org. The current 2010 Org is patched to SP-3 and Outlook Anywhere is currently disabled.
I have Outlook clients that do not yet meet the minimun requirements for 2013 (Outlook 2007/2010). When I install my first 2013 server will it effect the current downlevel clients? The mailboxes are still in 2010 so my thoughts were since the Office upgrade
including Outlook has not yet taken place I didn't want to wait for them to at least get 2013 into the Org. The 2013 server should effect the clients until I configure the CAS on 2013 and only when they are at the proper version, is this correct? Does Outlook
Anywhere need to be first enabled and configured on the 2010 CAS before I attempt the confgiuration on the 2013 CAS? I just dont want to install 2013 and have Outlook connectivity issues right out of the gate...
Thanks in advance!

Outlook 2007 and 2010 are supported for Exchange 2013, you just need to push out the latest patches.
http://technet.microsoft.com/en-us/library/aa996719(v=exchg.150).aspx
If you configure the URLs properly in Exchange 2013 to URLs that point to the Exchange 2010 servers, your clients shouldn't try to talk to the Exchange 2013 server.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Search-Mailbox not attaching the infected emails in target folder and deleting the contents in exchange 2010 & 2013 coexistence

Dear All,
I have an issue with deleting circulated spam emails in my environment through search-mailbox
We have Exchange 2010 & 2013 CU5 environment
I followed the search and destroy document for exchange 2010
http://windowsitpro.com/exchange-server-2010/search-destroy-email-content-exchange-2010
Added the user to Discovery Management group
Created a new role group as below
New-RoleGroup "Mailbox Import-Export Management" -Roles "Mailbox Import Export"
Add-RoleGroupMember "Mailbox Import-Export Management" -Member Administrator
I ran the below commands
Search-Mailbox -Identity "[email protected]" -SearchQuery "Subject:'report'" -TargetMailbox "Administrator" -TargetFolder "Filter" -LogOnly -LogLevel Full
The above command gets completed successfully and sends the log report however im unable to see any attachments
Similarly the deletecontent also gets completed successfully and logs result. But it does not delete the infected emails
Search-Mailbox -Identity "[email protected]" -SearchQuery "Subject:'report'" -TargetMailbox "administrator" -TargetFolder "filter" -deletecontent -LogLevel Full
Any idea why it is not fetching the infected emails in zip file and why it is not deleting but it is able to log in the target folder
Any help much appreciated
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish (MVP)

Hi All
I managed to find the solution. Below command helped me in solving the issue
get-mailbox -ResultSize unlimited -IgnoreDefaultScope | search-mailbox -SearchQuery ‘Subject:"virus infected"’ -LogOnly -TargetMailbox administrator -TargetFolder filter -LogLevel Full
get-mailbox -ResultSize unlimited -IgnoreDefaultScope | search-mailbox -SearchQuery ‘Subject:"virus infected"’ -TargetMailbox administrator -TargetFolder filter -deletecontent -LogLevel Full
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

Issues with old calendar items after migration from SBS2008R1 to Windows 2012R2+Exchange 2013

Hello,
After migrating a customer from Windows Small Business Server 2008 R1 to Microsoft Windows Server 2012 (DC) and Microsoft Windows Server 2012 & Exchange 2013 there are a few issue regarding
the GAL and old migrated calender items that we are unable to resolve:
Old calender items which were Exported to PST when the Server 2008 R1 environment was still live were imported to the new mailbox of the user, located on the Exchange 2013 mail database. This
seemed to be working just fine.
The problems arise when a user tries to edit or re-send an old calender item. There actually are 2 problems:
1. When resending an old calender item, OLD GAL entries are used (even when re-entering the contact details) and the emails are send to nobody and you get the mail back from postmaster
2. When updating an old calender item you get an error that you do not have permissions, probably because you are NOT the 'old' Exchange user.
Thanks in advance!

Did you use Exmerge or similar to export?
You may have an issue like that explained here.
http://blogs.technet.com/b/sbs/archive/2009/05/21/cannot-reply-to-old-emails-or-modify-old-calendar-items-after-pst-mail-migration.aspx
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Ipad/Iphone calendars missing events from exchange calendar

I have an Iphone and Ipad, both using iCal. They're set up to sync with Exchange 2010 server. Somehow both devices are missing random events from the calendar. I can see them in the outlook 2010 calendar. I've already found a solution to fix this(Turn Calendar Syncing Off and On again to rebuild the calendar). What I'm looking for is a reason as to why this is occuring. Any Ideas would be greatly appreciated. I'm using the most recent IOS on both devices.(6.0.1)

I seem to have fixed it myself. Sorry for adding to the digital clutter.
After dismounting my iPhone, the clear history button was enabled. It then synched well.

After migration Exchange 2013, MBX server, CPU utilization is so high

CPU utilization become so high this morning after migration into Exchange 2013,
Some healthy DBs is getting disccounetced with growing replay Queue length, mounted DB is no issue.
It seems that's short of CPU performance,
Are there any processes to limit or set up to reduce the load of CPU, MBX servers? It's temporary treatment...

What's the CU level you have for your Exchange 2013? Also, please check node runner processor as Node Runner process can cause CPU utilization issue. I would also suggest to check your disk IOPs as it looks like disk IOPs issue to me as well. Thanks.
Regards, Riaz Javed Butt | Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365 | mstechtalk.com

Contact list not show after migration Exchange 2007 to 2010

Hello.
I have a old infraestructure with exchange 2007 and new organizacion with exchnage 2010
If I migrate a mailbox from 2007 to 2010 I can open the mailbox on 2010 without problems,
From owa works correct active sync and outlook work correct, I can send a receive mails but, from outlook client I can not see the Global Address list.
Step by step:
User with mailbox over exchange 2007.
Outlook, owa active sync.. all is working fine and I can see the Global Addres list from owa and from outlook.
Move mailbox from 2007 to 2010
Completed ok without errors
The user mailbox on 2010 working fine, I can access by owa by outlook and active sync and from owa I can see the Global Addres list but from outlook I can not see the GAL.
I've tried diferents outlook versions: 2003 2007 and 2010 but I can not see the GAL
If I try to download de GAL from Outlook I see outlook download the correct list and complete ok without erros but not show on outlook.
I don't know why..
Exchange 2007 with sp3 and 2010 with sp3 too.
Any idea how could resolve this problem?
Thanks in advance¡

Hi
Did you migrate your address list or create a new one? Move-OfflineAddressBook "Default Offline Address Book" -Server <your Exchange 2010 server>
Get-OfflineAddressBook | fl *server*
Set-OfflineAddressBook "\Default Offline Address Book" -VirtualDirectories "your exchange server\OAB (Default Web Site)"

Exchange server name not changing in mail profile after migration from 2010 to 2013

Following a migration from 2010 to 2013 we are finding that for a number of users the old exchange server address stays in the mail profile (control panel -> mail -> e-mail accounts) which causes Outlook not to load.
We are able to go into control panel -> mail -> e-mail accounts and change this manually to the new exchange 2013 server address but we have quite a number of users and don't really want to do it manually.
Shouldn't it be updating automatically and if so why is it?

Hi,
Yes, it should be changed by autodiscover. Does this issue occur to all the migrated users?
I have seen this kind of issues before when migrating from Exchange 2003/2007 to Exchange 2010. The most efficient way is to rebuild the Outlook profile.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

All websites down after uninstalling Exchange 2010 from Web Server

Hello,
I successfully uninstalled Exchange 2010 (Client Access Role) from a webserver that hosts a company website and some other web apps, as a last step on a migration to 2013. But after that, some application pools were not started automatically, resulting on a
503 error even after starting the app pools manually.
I was getting IIS event Id 5139.
Fortunately it is a hyper-v server so I applied a snapshot I created prior to uninstalling exchange and got it working again. I need to know what happened before doing it again.
I would like to know about similar scenarios and how did you fix it.
thanks in advance.

Hi RCKSTR,
Are you running website in Exchange? If yes it is not a recommended way of working. Exchange is supposed to a standalone.
Websites will not run if IIS uninstalled.
Ensure IIS is installed and your website settings remains the same.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Impact of enabling Calendar Repair Assistant on Exchange 2010 mailbox server

We have a couple of iPhone users reported they were having calendar items disappear from their calendars. Many suggest to enable Calendar Repair Assistant for those users on mailbox servers. We are running Exchange 2010 SP2 RU7. Do
you know if there's any impact like performance when enabling Calendar Repair Assistant ? What's your best practice? Thanks in Advance !!
This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Hi,
The Calendar Repair Assistant is used to detect and correct inconsistencies with single and recurring meeting items for mailboxes located on the Mailbox server. Then recipients won't miss meeting announcements or have unreliable meeting information. Based
on my knowledge, there is no official article mentioning that enabling Calendar Repair Assistant has an impact on performance.
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Copy to my calendar missing after migration Exchange 2010-2013

Similar Messages

Maybe you are looking for