Copy Transfer rules between 2 Infosources

HI experts,
I have two infosystems : E30 and T30.
how can I copy the transfers rules from E30 to T30?
thanks a lot!

Hi Marc,
Copying Transfer rules between infosources is not possible.
However you can transport the rules from one system to another.
Regards,
R.Ravi

Similar Messages

Error in creating transfer rules beween infosource and datasource in BI 7.0

Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.

Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi

To copy transfer rules

Hi guys,
how do we copy transfer rules, i need to build one more cube
with the same transfer rules with slight modifications..
Your help will be rightly appreciated
Thanks,

hi
There is no option for directly copying
You have to copy the routines manually and you have to create the other mappings again.
Assign points if useful
Regards
N Ganesh

Copy Transfer Rules

Hello,
Can any body tell me how to copy transfer rules from one source system to an other for same datasource.
eg: Material Attr from R/3 DEV and R/3 QA systems into BW DEV system.
Any help is greatly appreciated.
Thanks,
Srini

Hello Srini,
as far as I know, this feature is not available. If I have to do the same, I use 2 sessions. The first one with the template (to copy from) and the second with the new transfer rules. But this works only, if the structure of the datasource in both systems is exactly the same. You can also use the meta data repository to copy from. Here you will also find the coding of the start routine as well as the coding for each infoobject.
regards
Siggi

How to knw the Transfer rules of Infosource 80PUR_O01?

In AWP,
In Metadata Repository,
Taking an example,
"Vendor Evalution-0PUR_C02" Infocube we get Update rules at the bottom of the page,
from Update rules page, in the bottom of tht page we get Infosource,
Now in this Infosource page we get 'Transfer Rules'.
this is the normal procedure i suppose to find 'Transfer Rules'.
Similarly im trying out for "Purchasing Order Qty Service Level-0PUR_C07",
but im not able to get the 'Transfer Rules for ths Cube.
Please let me know the Procedure, how to find out Transfer rules for this "PO Qty Service level" Infocube................?
Regards,
Sourav

the best place to search the content objects is HELP.SAP.COM
InfoSources
2LIS_02_ITM Purchasing Data (Document Item Level) as of 2.0B
2LIS_02_SCN Allocation Schedule Line with Confirmation
2LIS_02_CGR Allocation Confirmation with Goods Receipt
2LIS_02_SGR Allocation Schedule Line with Goods Receipt
http://help.sap.com/saphelp_bw33/helpdata/en/c4/1478c35bda7b4cb5224251c84ffaa2/frameset.htm

Problems to activate transfer rules and infosource 2lis_02_itm and 2lis_02_

hello,
now I am working with the 0PUR_C01 cube of purchasing and I want to active the data flow before for it.
I try to do it directly selecting data flow before in the activation settings of the cube, but I coludn´t
after that, I try to do it activating the transfer rules and the infosource separately but I get some errors, teh most important thing (because I have the same situation in other areas) is:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
I hope that some can help me with this issue,
Thanks in advance and best regards,
Niurka

Thank you very much Chetal,
I activated others Infocubes, but I have the same problem for Infocubes with ODS inside they data flow,
I tried with some notes like: 538052 and I enter the client but not the user or the server, I proved the RFC Connection too.
But the bug issue is the export data source creation that failled everytime, right now I try to solve this and the log says some error about the syntax error in transfer routine for the infobject 0GN_R3_SSY this object exist as characteristic and his convertion routine is ok (because I verificated) and exist as part of the transfer rule but I don't know how to go to the routine creator for check this point.
Thank you very much in advance,
Niurka.

Run time error while activating the Transfer Rules

Hi,
Error when activating Transfer rules for Infosource :
0FI_GL_1 -
(General ledger: Transaction figures)
Run time error : ASSERTION FAILED
Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
Thanks,
Kishore

Hi,
As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
It is always better to import the latest patches avialble in service market to avoid this type of problems.
Also see tha note 1010672 amd check whether it is applicable to your problem.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Problem in mapping Infoobjects in Transfer Rules

Hello Friends,
I need your help regarding following issue:
I installed ODS named STABILITY STUDY : INSPECTION RESULTS QUANT. DATA (0QM_DS02) from Business Content.
The ODS & Update Rules have been installed properly.
Few infoproviders had been already installed at the time of implementation, hence majority of the infoobjects existed from before. Only few were new.
Now when i tried to map transfer rules, newly installed infoobjects are not seen in data source.
The data source is 2LIS_05_QE2 and few of the infoobjects not being mapped are:
Sum of Target Value (0SUMSOLLW)
Target Val.Available (0IND_SOLLW)
Phys. Sample Number (0PHYS_SP)
Inspect.Lot Origin (0LOT_HERK)
Inspection Method (0PMETHODE)
Plant of Insp. Meth. (0PPLANT)
Insp. Meth. Version (0PMTVERSION)
Can any one suggest me how should i proceed??
Regards,
Anuradha Vakil

Dear Anuradha,
Before installing transfer Rules or infosource first u have to install the datasource in source system and replicate it into bw.
If u have done this already then u want to map some objects in transfer rules then u have to check whether those fields available in the datasource , If they are available then goto transfer structure click datasource/transfer strucature tab there right side box u can see the unmapped fields in black colour move them to right side then go to transfer rules map those fields to infoobjects.
If the fields are not there in the datasource u cant do any thing just activate the transferrules.
Assign points if it solves ur problem...........or clearly reply what is ur problem.
Best Regards,
SG

Urgent : Error in transfer rule of 0material_attr

Hello,
We are trying to activate transfer rules of InfoSource 0MATERIAL_ATTR
in BW Quality System. But We are getting the following error message:
================================================
Error when generating the message type for transfer
structure /BIC/CCBA0MATERIAL_ATTR
Message no. R3115
Diagnosis
An error occurred in the generation of the ALE message type for the
transfer of changes to a certain basic characteristic.
System response
The transfer of changes to this basic characteristic cannot be carried
out.
Procedure
Errors in the number range object for the naming of the message type or
errors with the entries in the respective ALE tables could be the
possible cause.
======================================================
Pl. help me to resolve the issue

Hi,
Use tcode RSRV to repair object. Goto RSRV>All Combined test>Master data-->Check Master data for a char .
hope it helps...
regards,
raju

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Transfer Structure / Transfer Rules comparison or copy

Hello,
We have our BW dev system linked to both dev and QA R/3. Consequently, the transfer rules are created manually for the QA.
Do you know if there are any tools to compare the transfer structure/rules for given data source and source systems?
Regards,
Michal

Hi Michal,
What I understood is, you have only one Bw system & both R/3 Dev and R/3 Quality boxes are connected to it and you have to take data from both boxes to BW system.
I do not understand the cause of this kind of system landscape but you can assign the another data source to same infosource then you will see data comming from two system one will be for R3 Dev and other for R3 Quality.
Hope this will help you
Suneel

Copy routines written in transfer rules to other system

<Moderator Message: Even as a newbie you should be able to copy and paste or read here and write there>
Hi All,
In the datasource '0CO_OM_OPA_6' , in the transfer rules for infoobject 0PART_CCTR' , we have a ruotine written 'Fill Partner Cost Center from Partner Objects'.
Now I want to write the same routine for same infoobject in another test server for the same data source.
Can anybody please tell me how to go about from start as I am new in BW.
Regards,
Sushmita
Edited by: Siegfried Szameitat on Jun 8, 2009 3:47 PM

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Transfer Rule copy in BW When client is changed ...Urgent please help

Dear Guru's
We have BI 7.0 System Connected with R/3 as S.system Which has two clients(Client 90 and client 10) , Earlier the Source System connection was with Client 90 and Exists feel Transfer rules and Ipackages, Now the Connection is changed to Client 10, So is there any possibility or a process that i can copy all these Transfer Rules and I package from (client 90)to (Client10), But not creating it manually again.
Can any one please suggest me some idea.
Thanks in advance
Dev
Edited by: Srinivas dev on May 29, 2008 11:44 AM

HI
One small Qn.
The note is for changing the client or copying it from one S.system to another sys (Eg:- dev to production)
But in my case i have to change the client within Bw system , So that i can get all the transfer rule from one client to another
Thanks and Regards
Dev
Edited by: Srinivas dev on May 29, 2008 3:05 PM
Edited by: Srinivas dev on May 29, 2008 3:22 PM

NO PSA for InfoSource and source system 120 : Maintaing Transfer Rules

Hello BI Experts ,
I am working on Generic data source extraction.
Earlier I mapped all fields infoobjects in Transfer Rules and then loaded data to ODS properly.
But later on I made few changes in Generic data source view and exits in the R3 and replicated the data source to BI.
Then Remapped the fields to infoobjects in Transfer Rules.
Now I can see Transfer Rules Green and all fields are mapped properly.
But when I activated Transfer Rules I am getting message that ,
"There is no PSA for InfoSource ZPS_DATA_BB and source system 120 "
Data source is active in R3.
Communication Structure and Infosource are Active in BI.
Regards ,
Amol K.

hello Surendra ,
I did the same thing already.
I was looking for some otherway.
Thanks for reply.
Regards ,
Amol K.

Error in Infosource, transfer rules transportation

Hi
I transport the datasources from R/3-DEV to R/3-QA systems . And those are transported successfully. Then i replicated the datasources from
R/3-QA system to BI-QA system.
Now im trying to tranpsort the InfoSource, Transfer rules from BI-DEV to BI-QA system then it says that
DataSource 1_CO_PA_COST does not exist in source system QS1CLNT400 of version A.
QS1CLNT400 - R/3 QA system.
Pls let me know what i need to do
kumar

Hi Ravi,
check in RSA6 whether ur DS is there or not.
If it is not available,then check in STMS whether the transport has been imported or not.If you do not have authorisation to STMS,ask ur Basis guys to check that.
Thanks & Regards,
Suchitra.V

Copy Transfer rules between 2 Infosources

Similar Messages

Maybe you are looking for